Chart label options

Hello, has anyone experienced an issue where the data labeling on the charts always defaults to "side of frame". Even if you go into the chart options and change it to say, "edge of frame", after hitting "OK", it just goes back to side of frame. Any idea why? Thanks in advance.

I faced the same problem.
The following helped:
right click in graph -> select 'chart expert' -> goto tab 'options'
-> deselect check box 'Auto-arrange' in layout -> try it again . . .
Hope this helps in your case, too.

Similar Messages

Format % in chart label when Data Label Option is 'Show Series and % value'

I am using:
OracleBI Discoverer 10g (10.1.2.2)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
I have a report that returns 2 columns 'Repair Status' and 'Count' The graph is a pie chart and I have selected the Data Label Option as 'Series Label and % value'. The percents displayed in the label have no consistent format. Sometimes 2 decimal places, sometimes 4 decimal places. I want the chart label to consistently display the % in the chart label with no decimal, i.e. 96%. How can I accomplish this?

Hi,
Where you selected 'Select Label and % Value', there is a button at the bottom, Format Data Labels. In there, there is a Number tab where you can play around by selecting Currency, Percent, etc. Have you tried this?
Cheers.
Mahesh

Can You Edit/Resize/Move Chart Labels in Pages '08?

I cannot get a seemingly basic page layout technique to work: editing pie chart labels. There appears to be no way to add a soft line break, adjust the text box, move the data label. You can't add a two-line title, either.
I am hoping that there's something I've overlooked. I handle communications for a 40-person nonprofit. I was so excited about the new iWork suite and the potential for replacing Office. I really liked the functionality of Pages and was on the point of recommending it. Then I worked on one of our reports. And got stumped by the charts. The pie charts look sharp. The color palette is better. But I can only seem to edit data labels in the inspector. Pages Help didn't help. It says I can select a label location (see below), but no pop-up exists or at least none that offers Middle or Below Right.
Can anyone help me solve this riddle? Working with charts doesn't seem like an advanced feature. I must have overlooked something, right?
from Pages Help
For pie charts, you display values as percentages by choosing Show Pie Values as Percentages from the Data Point Settings pop-up menu on the Series pane. To display the data series name for a wedge, choose Show Series Name from the Data Point Settings pop-up menu.
Select a label location from the Data Point Settings pop-up menu (for example, Middle or Below Right).

Hi Justin,
You should be able to manually move the X-Axis labels in the Preview Mode.
Go to the Chart Expert > Options tab > Uncheck the 'Auto-arrange' option.
-Abhilash

Feature Request: Control Text Orientation on Chart Labels

I notice that chart labels will automatically rotate 90 degrees counterclockwise when there is not enough space to display them vertically. However, I would like to be able to control this behavior so that I can make vertical labels when my charts are larger. A simple toggle option would be great.

In the Alerts tab of iChat preferences, select Video Invitation from the Event pop-up menu. Then select the Run Applescript checkbox and select Auto Accept.applescript from the adjacent pop-up menu.
Granted, this doesn't give you password authentication, but I don't believe anything is available for providing that capability.
Hope this helps.
Palms831

Chart Labels displays correctly in Visual Studio Preview but shows incorrectly in Report Manager after deployment

Hi,
We have built a SSRS report which contains a chart and a tablix. The chart labels (Male and Female) is displayed correctly in the Visual Studio Preview but in the Report Manager it displays as Female and Female.
These are the following things which we have tried to fix it:
Deleted and redeployed the report
Restarted the Report Server
Checked the report caching. There is no cache for this report.
We use SQL Server 2012 and Visual Studio 2010.
Any help is very much appreciated.
Thanks,
AJ

Hi AJ,
Per my understanding that you have two label "Male and Female" which display correctly in the Visual Studio 2010 but not correct in the Report Manager, right?
As you have mentioned that you have checked the report caching, please make sure you have set the "Do not cache temporary copies of this report" in report manager and also check to delete the rdl.data cache file under the project if you have
which path like:
\Visual Studio 2008\Projects\Report Project
If possible, please try to create an new report the same as this one to have a double check.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Iphone is no longer a label option when setting up a new contact

when setting up a new contact, iphone is no longer a label option. any idea how to get it back?

Welcome to the Apple Community.
Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Chart Labels In Apex

So I'm trying to create a chart that groups an aggregate function by the primary key. On the label, I cannot figure out how to query a lable that shows the primary key and the name of the customer that is located in a different table. I'm learning how to develop in Apex so I'm using the sample database right now. The following query adds up the order total by customer but I want the label to not just say the primary key (customer_ID) but also the customer last name (Cust_last_name) located in the demo_customers table. Here is the query:
select null link, CUSTOMER_ID label, SUM(ORDER_TOTAL) value1
from "LEARNING"."DEMO_ORDERS"
group by CUSTOMER_ID
Also I built this query with the query builder. Can someone explain the purpose of the "Null Link" in the select clause? And how can I get the percentages to show in a pie chart?
Edited by: 1001737 on Apr 22, 2013 2:23 PM

Hi, welcome to the forum. Please access your Control Panel and update your handle to something a bit more personal than 1001737.
When you said:
I want the label to not just say the primary key (customer_ID) but also the customer last name (Cust_last_name) located in the demo_customers table You were half way there, you just need to join your current query to the demo_customers table to retrieve the customers last name and use that as the label on your chart.
Try this version of the query in your chart series; I find that a pie chart is best for this purpose:
select
   null link,
   cust_last_name label,
   round(sum(order_total/total.tot),
   2) value -- determine percentage of all orders
from
   demo_orders,
   demo_customers,
   (select
      sum(order_total)tot
   from
      demo_orders) total -- sum all orders
where
   demo_orders.customer_id = demo_customers.customer_id
group by
   cust_last_nameYou asked
Can someone explain the purpose of the "Null Link" in the select clause?Placing NULL here states that you are choosing not to allow the action of a link when one of the chart labels is clicked. See this site for some excellent charting examples and further explanation:
[url [http://apex.oracle.com/pls/apex/f?p=36648]Sample Charts, Maps, Gantts and Trees
And how can I get the percentages to show in a pie chart?Percentages need to be calculated; to add the *%* to the label, set the Postfix within the Display Settings of Chart Attributes.
Jeff

Chart label font color

Is it possible to change the color of fonts in chart labels
(not axis labels)? The default black does not stand out well
against some colors.

Are you referring to data tips?
css style declartion can be used to change the text
color.

Obiee 10g chart label size

Does anyone know how to change the size of the chart labels??
I'm trying to show some labels that are automatically trimmed (the label gets like this in the end ...), in the chart properties I can't find where I change this, probably this is a default number of chars per label?

It seems that leaving the truncate value by default, in the format text from Titles and Labels properties, was the problem. I set it to a large value and my problem was solved.
Hope it helps anyone.

Pie chart Labels clickable

Hey guys,
Is there a way to make pie chart labels(callout labels) clickable?
Thanks in advance.

Hans: Thanks, again.
(And, again, this should be easy but isn't). Requestors ask the darndest questions.
Doug in York PA
Douglas R. Eckert

Numbers 3D Column chart labels

3D Column chart labels do not work.
If a label is displayed horizontally, it over-writes the next label and there is no way to turn the label vertically.

The chart will move allowing you to see the labels.
There is no way of moving the labels as you can in the 2D chart.
Best.

No custom label option when editing a phone # under a contact

I have an iphone 4. When trying to place a custom label for a phone # I do not have the option to create a "custom label". I have the up to date software for the phone (updated today). My wife and childrens iphones (previous versions) DO have the custom label options. Any advice?

if you go to the contact you want to make the label for........ go to that contact, click on the tab that says , iphone , phone or home .. its in blue next to the phone number .. this will bring up a list of options... now scroll down to the very bottom. there it says , add custom label.

I am trying to hide the Options menu in UserChrome.css but it is not working. Here is what I have tried menuitem[label="Options..."] {display:none !important;}

In the userChrome.css I have tried the following entry: #updateSeparator, #checkForUpdates {display: none !important;}
menuitem[label="Options..."] {display:none !important;}
menuitem[label="Add-ons"] {display:none !important;}
menuitem[label="Get Bookmark Add-ons"] {display:none !important;}
The other lines work, but the line to hide the Options menu does not. This in on Windows 32-bit XP sp3.

It is an ellipsis (…) and not three dots.
If there is an ID for a menu entry like in this case #menu_preferences then it is better to use that ID.
<pre><nowiki>#menu_preferences, #menu_openAddons, {display:none!important;}</nowiki></pre>
"Get Bookmark Add-ons" is a normal bookmark that you can remove via the right-click context menu or move elsewhere.

No able to see edit label option in Layout tab

Hi All,
I am trying to edit properties of input fields. as per SAP help and documents, we get option of edit label in layput tab, and then we get to see general and other catagory of properties.
But i am not able to see this option, i can see Rename, Select all, Bring to back, bring to up otions only.
Can you please suggest what is missing here. We are on SP14.
Thanks for your time,
regards,
Sudhir

Thanks Deep,
I am trying to use a dropdown for one on input fiels. But in desginer tab, there is no option to change this properties of field.
According to one of Sap help doc, i should be able to do it using edit label option, in layout tab. But it's not showing.
I am using VC 6.00.0060 .. i dont think there is any patch applied on this.
regards,
Sudhir

Edit Label Option not available in Contacts of Nok...

Am having a problem in E-7 that it does not supprt EDIT LABEL option in Contacts since I use many numbers in a single entry. Can anybody help me in, thanks
Hi TarunKukreja,
We have edited and remove your email address on your post, personal details like IMEI/Mobile number/real name etc. We encourage user not to post this information on the Nokia discussion for your security and privacy purposes.
Thank you for understanding.
modjo2011
Moderator

I would add to that , once you have selected the contact and edit , you need to select options and add detail ! You can then add as many numbers as you wish . However be careful if adding company numbers as if you have several contacts working at the same company it will cause problems with caller id as the phone will not know who is calling if you have the same number attached to several contacts !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Chart label options

Similar Messages

Maybe you are looking for