Chart not showing last data point

I have a chart that contains data points, 11/15/2000, 11/15/2001, etc. Each data point is plotted in a line graph. There are 11 data points, from 11/15/2000 to 11/15/2010. For some reason, the last data point is plotted on the line graph but there is no label for it on the x-axis. Does anyone know why that may be?
Thanks in advance,
Zack H.

Need more info.
Version of CR and any patches installed?
Thank you
Don

Similar Messages

Showing one data point on a line chart - X-axis label placed away from its actual position

Hi Guys,
     In line chart, i used CircleItemRenderer to show single data point. It shows correctly if it is single data point. But the x-axis label placed away from its actual position. Right now it displayed left most position where the line chart starts. I need to move that label straight of that datapoint where it plotted. Please see the screen shot attached with this post.
In screen shot, x-axis label "Jan" displayed in left most position.
     And how can we show the datatip for single datapoint. At present, we can't able to see the datatips also with single datapoint.
     Can any body help me to fix those two issues.

I figured out a way to customize a single datapoint in a line series. The solution is at this link:
http://www.flexdeveloper.eu/forums/flex-charting/customize-a-datapoint-in-a-line-series/

How to get the last data point from a TDM file in LabVIEW?

Hello,
I am using LabVIEW to analyze some rather large TDM files, and I need a way to get only the last data point. So far, the only way I have been able to accomplish this is by reading the entire file. Is there a property in the TDM file or a function in LabVIEW that will allow me to get the index of the last item in a channel?
Thanks!
Christina

Do you want to avoid reading whole file and want to be able to reach or get the index of last value of channel? is there any specific reason? I am not sure you could do it without loading the whole file. But the easiest way would be just to use array functions "array size" would give you the index of last element.
-Nilesh
Kudos are (always) welcome for the good post. :-)

Calendar itmes not showing end date in list view/when opened

Hi,
Got a client with a very strange issue with meetings.
Few of the meetings are not showing end date after accepting those although he can see all meetings in calendar.
I have already checked below on his machine
switched the month view to ''low detail'' then back to "high detail"
Show end date is visible in views
Reseted view options to default
Strange thing which I have noticed during troubleshooting is that issue is happening with Exchange cached mode only and not in Online view.
Client is using Windows 7 Enterprise with office 2010 on his machine.
I hope someone can help here. Let me know if any further infomation is required.
Thanks

Outlook 2010 would read the local data in local email profile and the view setting is also stored in local configuration when someone runs it in cached mode.(Email profile in online mode would read the data from Exchange store directly)
At this point, I recommand that we create a new profile to check if we could see the end date in Outlook calendar view.
http://support.microsoft.com/kb/829918/en-us
Tony Chen
TechNet Community Support

VLO6if will not show PGR Date in inbound delivery

hi Gurus,
VL06IF will not show the Post good receipt date of an inbound delivery,
need this date inserted in the report.last column good recepit does not show any dates
showing last column empty
please check
thanks,
Joan

Hi,
Check Note 128150 - VL06: Designing your own display variants. It explains how to do with enhancement V50Q0001.
I hope this helps you
Regards,
Eduardo

IPhoto does not show last import

iPhoto does not show last import. When I try to re-import photos from a desktop file it says the photos are already in the iphoto library and cannot be imported. What do I do? I've already re-installed iPhoto 09 and run updates.

Are you saying that the last import is not showing in the last import section of the source pane or is not in the Events in the library window? If you do not see the event then your camera has the wrong date - look in the last import album and find the date and then go to that date in the events - it will be there - if you want you can then slelect the photos and use the adjust time and date command to fix it - check change original files
LN

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

If you only see the time then that would mean that you see an entry of the current day (today).
History items from past days should have the date as well in the Most Recent Visit column.
You should be able to see this changing if you open the last 7 days folder and scroll down.

Not showing the Data in VC application

Hi I have developed the application in VC.
It is showing the data some times , it is not showing the data. Can u please let me know what is the problem.
when i checked using the Test Data service . It is showing the data. Then i have developed step by step, in between the time i use to run the application , it was showing the data. finally i have assigned to some role and user id. then also it is showing the data.
Next day after i run the application , it is not showing the data. displaying the message .
"No Data Found".
But when i run the BAPI at the back end R/3 it is giving the data properly.
Can u tell me what might be the problem
REgards
Vijay

Hi Krishna,
check the logs in the NWA. It seems that your connection is broken down sometimes, maybe a timeout. How many records does your data service return?
Check it with external debugging of the BAPI, when you can reconstruct the error.
Best Regards,
Marcel

Import option is not showing the Data Source created using ODBC

Hi all,
I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
Can some one help me to understand the issue and to solve it.
Thanks,
Mithun

By calling your cellular data provider.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Query not showing complete data

Hi,
I faced this issue many times. Original query is not showing complete data but when I create a new query with same rows, columns and filters it gives correct data. Do anybody have any idea what can be the problem?

Below is the checklist :
1. Make sure you have same number of filters/ restrictions in both the queries.
2. Make sure you are not using any authorisation object.
3. Make sure the technical names of the objects you are using in the query are name.
4. Make sure both the queries are on the same multiprovider.
5. Make sure both are of same version.
These are very basic things, I assume you must have done. But these are the only possibilities I could think of.
If this is fine, then as suggested by Raman you can add one object each time in both the queries and test the output. You might get some clue.
Thanks,

I am using illustrator CC there are not showing scale size pointer in any object?

I am using illustrator CC there are not showing scale size pointer in any object? Anyone tell me why it was does it? And how i can come again on that position?

Or maybe Cmd(Ctrl)-U which is the toggle for Smart Guides?

DB02 - Space - overview Histoy not showing old data

Hi,
We are using ECC6HPUX11Oracle 10.2.0.4 and patch level is 17. We have recenlty upg the supp pack. Our issue is DB02 is not showing last years Space history. We have other Env of SRM SCM and XI where there is no problem with the Space - history. Now the space history is showing only from jan 2009 and we want the old space history. can anyone please help us
Thank you
Umesh K

Hi,
Please check attached link.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=73945]
Hope this helps.
Manoj

ST03N Tcode not showing last 3 days average response time

Hi,
In my Production system not showing last 3 days average response time.In our production 1 (CI+DB) and 3 dialog instances are there. In all servers sapcollector working fine but in all servers not showing last 3 days values.Please advise solution.
Thanks,
Srinivas.

The following are the prerequisites needed to get the workload monitor(st03) working.
1)      The system time zone of the SAP and the Operating system has to be same. This can be done by customizing time zones of the SAP using the Tcode STZAC.
2)     All the standard background jobs has to be scheduled to run. This can be done by scheduling the standard background jobs using the Tcode SM36.
3)     The following parameters has to be added to the instance profile.
Parameter                                                  Value(default)                                                  Description
i.     stat/as_collect                                                          = 2                                          Application statistic: detailed records.
ii.     stat/as_level                                                              = 1                                          Records for application statistic are active.
iii.     stat/max_files                                                           = 48                                        Max. no. of stat files to be kept.
iv.     stat/as_max_files                                                    = 48                                        Max. no. of appl. stat files to be kept.
This can be done by editing the profiles using the Tcode RZ10.

Team calendar My trainings not showing any DATA on Production Server

Dear ALL,
We are facing very critical issue on Production Server.
We have two Id's for which Team calendar, My trainings is not showing any DATA .
We observed that this is happening to both the users who had MSS role previously..
now for your information we have check the following things already .
1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
2. The authorization. Is correct..
3. We got help from SAP..But not solved problem.
Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
Let me know ASAP.

Hi,
All r correct in both system .............even following things i have checked .................which i got from reply from U.
01.07.2009 - 11:29:52 UK - Reply by SAP
Hello Pinki
You need to check the settings in your different systems
the #group of organizational views# MSS_LTV_EE is maintained
for the Team Calendar and MSS_LEA_EE for the request mode.
Check the IMG step
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
Also check these
Please use the evaluation path "ORGASS".
To change the evaluation path kindly go to the view V_TWPC_V , look for
the ESSDIR view and double click on the ESSDIR.
Please check the above customisation,
Tthe evaluation path SAP_MANG is used to determine
the root objects. "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information onthis topic).
Also check the customisation using
report RHSTRU00
In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
01 should exist. Please correct it as well
and ensure that
In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
a record for the group 'ATTEND'.
Hope this will help you.
Best Regards,
Siddharth Rajora
HCM
SAP LABS India

Chart not showing last data point

Similar Messages

Maybe you are looking for