Chart only for result

Hi all,
I have a query with key figure SALES and drilldown for customer.
I must to create a pie chart only for total row and key figure, but I need to keep customer drilldown.
Is possible to do it in bex or web?
How can I do, please?
Thank you
Gianmarco

My problem is that I have some virtual key figure in the query and so if I remove the drilldown the result change.
So I must to keep drilldown and create chart only for result row.
The problem isn't the filter.
Can you help me, please?

Similar Messages

How to Caculate Substraction of only for result rows in BEx

Hi,
I have a issue in BEx Report.
The scenario is like this.
Invoice Amount             Invoice Paid Amount       Pending Payment Amount
17.90 INR                             3,472.00 INR                      -3,454.10 INR
524.50 INR             3,472.00 INR                      -2,947.50 INR
1,017.40 INR             3,472.00 INR                      -2,454.60 INR
1,790.60 INR             3,472.00 INR                      -1,681.40 INR
35.80 INR                             3,472.00 INR                      -3,436.20 INR
57.20 INR                             3,472.00 INR                      -3,414.80 INR
28.60 INR                             3,472.00 INR                      -3,443.40 INR
3,472.00 INR             3,472.00 INR                      -20,832.00 INR
I am substracting (Invoice amount-Invoice Paid Amount) in a formula.
All the records are comming fine, but when it comes to result rows
it gives Sum(Invoice Amount) - Sum(Invoice Paid Amount) which is giving a value -20832.00.
As per my requirement it should 3472.00-3472.00=0.00.
I have Checked with SUMGT,SUMRT,SUMCT function, it is not comming.
Even checked with Exception Aggregation.
How to solve this issue, in other way.
Regards,
Subh

Hi,
I suggest one of these 2 solutions :
1-Instead of using a sum formula in the end of rows, simply put the line caracteristic result property to always appear : caracterisic menu -> representation -> lines result -> always show.
In this way, u dont have to use a formula and the sum will be done natively.
your result will be like this :
     Invoice Amount Invoice Paid Amount Pending Payment Amount
material     17.90 INR 3,472.00 INR -3,454.10 INR
     524.50 INR 3,472.00 INR -2,947.50 INR
     1,017.40 INR 3,472.00 INR -2,454.60 INR
     1,790.60 INR 3,472.00 INR -1,681.40 INR
     35.80 INR 3,472.00 INR -3,436.20 INR
     57.20 INR 3,472.00 INR -3,414.80 INR
     28.60 INR 3,472.00 INR -3,443.40 INR
Result     3,472.00 INR 3,472.00 INR -20,832.00 INR
2- Try to use the NODIM function before the sum formula : nodim(sum()) - nodim(sum())
Hope this helps
regards
Raed

Charting Query Total results in WAD

Hello, I have a question regarding charting only the results in WAD. Currently, I have a % Lot Acceptance Calculated Key figure and in my Rows "Vendor" Upon executing, I get each individual Vendor counts which fall in the % Lot Acceptance bucket. I then retrieve the results, summed up view but when I chart this in WAD, I do not want any low level results but only the rolled up results. Any suggestions on what approach I should take? Should I possibly be pre-calculating the % Lot Acceptance in the Update rules and create a new field % Lot Acceptance which holds the "resulted" value? Should I utilize Virtual Characteristics/Key Figures? Thanks for your help in advance.

Andy,
Welcome to SDn ,
whhat you could do is to remove all the drill downs so that the query result matches what you want in the chart and then save the same as a view , then attach the view to a chart data provider.
Maybe posting it in the Business Explorer forum will be of more help...
hope this helps...
Arun
Assign points if useful

Pie Chart on Overall result only

Hi
I have records like below
Profile TotalOrders    ErrorsOrders         NoErrorOrders
AllTel    20                  15                        5
Cellco    64                  34                       30
Overall
Result    84                   49                       35
I want the Pie Chart on Overall Result only . So i created the WebTemplates for it and i included the Chat and Table webitem .
So how can i get the chart on only overall result .
Regards
Suresh

You want to display both on the same chart item ?
In this case, you've to define the query with display of the overall result, and change the properties of the chart item, to say that you display the results. Don't know if it's flagged on or off by default. No need of 2 DP. I thought you wanted to display a chart with details on one side, and an overall result on the other side.

Search in Finder only returns results for "This Mac"

I'm experiencing the following, annoying issue with searching for files in Finder:
When I type a search text in Finder's search field, it only returns results when I select "This Mac". It does not return a single search result when being in any subfolder.
To make this a bit more clear assume the following structure:
| -– A
|    | -- B
|         | -- sample.pdf
|         | -- another-sample.pdf
|
| --- C
|     | -- yet-another-sample.pdf
|
| -- sample.pdf
I use finder to navigate to folder B. I type "sample" into the search bar. No results are returned.
Next I switch to "This Mac" and all of the above .pdf files are – correctly – returned.
The same happens when I'm in any other subfolder. Search only returns results when I switch to "This Mac".
Notes:
I'm not talking about network drives. All folders are local and below "This Mac" in the file system hierarchy.
I have forced Spotlight to reindex via sudo mdutil -E.
It happens on multiple machines, Snow Leopard upgrades and Lion clean installs.
Any idea? This bug renders Lion almost useful for me.

I had the same problem .... found this link
http://osxdaily.com/2007/02/15/spotlight-wont-work-fix-a-broken-spotlight-menu-w ith-these-troubleshooting-tips/
And solution 3 the simplest, no wait the wierdest,
Change the screen resoultion then revert!
worked for me ...... go figure.

I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged. Will Apple refund me for the audio book?

I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged.
Will Apple refund me for the audio book?
the irony of this is that the lost audio books is Steve Jobs biography!
Starting to wonder about the benefits of Android :-/

If you haven't been keeping a backup of your downloads (none of your iTunes downloads are included in an iCloud backup, apps, music etc are only redownloadable whilst they remain in your country's store) then you can try contacting iTunes support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My new I pad three connects to the internet but only for a brief period of time. I then have to restart it only to get the same results.

My new Ipad 3 connects to the internet but only for a brief period of time. I then have to reboot only to get hte same results. Any suggestions?

You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.

SharePoint Foundation 2013 - report / chart / Graph for Employee vacation.

In SharePoint Foundation 2013 I want to create a report / chart / Graph for Employee (Employee Id,Employee Name & Department) which will show month wise from which date to which date Employee are on vacation in particular department.
I'm thinking to create one List where where user will enter there vacation details and from that list report I will create chart / Graph Department wise to check the Employees availability.
Please provide some good example or idea in detail for this.

Hi,
Chart Web Parts are useful for visually representing data in line charts, bar charts, and other views. Charts enable you and other users to view performance information at a glance.
In SharePoint 2013, chart web part is one of the discontinued features. We usually use Excel Service to replace it, however, Excel Service is only available in Enterprise edition, so we need to figure out coding methods or third party tool if you are using
Foundation edition.
Here are some links for workaround in your situation, please check if they can be help:
http://sivarajan.me/post/SharePoint-2013-Chart-WebPart-Using-HTML-5-RGraph-with-WCF-REST-Services
http://charts4sharepoint.codeplex.com/
Regards,
Rebecca Tu
TechNet Community Support

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Document Splitting error - only for 1 company code (out of 2 company code)

Hii
We have two company codes: 1100 and 1200. Chart of accounts, chart of depreciation, controlling area are same for both the company codes. Only profit centers are different since both company codes are in two different location.
Document splitting is active in both the company code. (I have checked that node also). Also setting in ACSET (i.e. account assignment) is done for the depreciation area
When i am posting asset acquisition (F-90) and MIGO (for assets PO), its giving me error for document splitting. This error is given only for company code 1100 and not for 1200. All other transactions (including FB60) are working properly in both the company codes.
What can be error ? Is there any error in asset master creation or vendor master.
Please help.
I CHECKED IN EXPERT MODE IN SIMULATION. THEIR PROFIT CENTER IS NOT VISIBLE IN ASSET LINE ITEM. PLEASE HELP
Edited by: Deepak Agrawal on Jul 29, 2011 4:02 PM

Hi,
pls. write completeley which error message you get.
Kind Regards
Tarik

Display of only overall Result

Hi
Currently we have a ARreport is displayed following manner
Customer          0- 30 Day    30 - 60 Days E.t.c
A                  1000          6000
B                   230          10000
Total              1230          16000
User Want to see the report in following manner
                 0 - 30 Days   30 - 60 Days
total             1230          16000
when he click on 1230, he wants to view the customer who makes to 1230
For information - 0-30 days is a calculated Key figure
if we remove the customer from the row. the total is becoming zero.
your help is appricated

Hi,
Try this:
Create a structure in rows also..from context menu>new selectino>drag and drop Material. Rename new selection as Material.
Now drag and drop Material into rows next to structure.
Right clcik on Rows--->display as Hierarchy.
Now execute the Query.you will see Material (Which is Structural element description)...and if you expand it,you will get individual material values...
But as for as i know you would get overall result only for Basic KeyFigures.
Just tryout and let me know.
please don't forget to assign points to useful answers.that's the way of saying thnaks here in SDN.

All USB drives mount as read only for user

I have searched a bunch and thee results I find seem to be irrelevant to my situation. Most relate to a single USB media that is a problem and won't read or write.
On a new Arch install on a new computer (my third base system install). Running Gnome.
All USB mass storage devices mount as read only for the logged in user. Root has write permissions and I can mkdir no problem. It is not an issue with the USB drive itself as this occurs with multiple USB media (I've tested several SD cards on a reader and at least two drives, all the media works correctly on my existing installations)
I'm posting the contents of my /etc/group file in case there's an obvious error there I don't see, and my dmesg output upon plugging in the drive. User name is changed in the group file posted to "archie"
This is a single-user system.
/ect/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root,archie
ftp:x:11:
mail:x:12:
uucp:x:14:archie
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:
lock:x:54:
uuidd:x:68:
dbus:x:81:
network:x:90:
video:x:91:
audio:x:92:
optical:x:93:
floppy:x:94:
storage:x:95:
scanner:x:96:
power:x:98:
nobody:x:99:
users:x:100:archie
systemd-journal:x:190:
archie:x:1000:
avahi:x:84:
polkitd:x:102:
rtkit:x:133:
gdm:x:120:
brlapi:x:999:
kvm:x:78:
ntp:x:87:archie
dmesg output
[ 968.044188] usb 4-3: new high-speed USB device number 4 using ehci-pci
[ 968.170628] usb-storage 4-3:1.0: USB Mass Storage device detected
[ 968.171435] scsi7 : usb-storage 4-3:1.0
[ 969.174450] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 969.175068] scsi 7:0:0:1: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 969.939417] sd 7:0:0:0: [sdb] 15572992 512-byte logical blocks: (7.97 GB/7.42 GiB)
[ 969.941028] sd 7:0:0:0: [sdb] Write Protect is off
[ 969.941037] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 969.944664] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 969.945509] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.945517] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.952682] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.952693] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.956396] sdb: sdb1
[ 969.965003] sd 7:0:0:0: [sdb] No Caching mode page found
[ 969.965011] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 969.965015] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I'm sure I'm just missing something in user management, but I can't find what.
Last edited by hooya (2014-04-27 03:10:49)

I am also having the same problem. Root can read and write to automounted drives, but my user cannot. I've tried with a variety of drives, I am assuming they are being automounted by root instead of the logged-in user somehow. (I am running x directly, and am not using a display manager, if that has anything to do with it).
When I look at how it is mounted it is as follows:
/dev/sdc1 on /run/media/myuser/drivename type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)

Opening Balance only for Assets and Liabilities in Trial Balance Report

Hi SAP B1 members,
Following is my query :
I would like to see the Opening balance in the Trial Balance report only for Assets and Liabilities and not for Revenue and Expenses.Though the other details such as Debit,Cumulative balance etc should be seen for all Assets,Liabilities,Revenues and Expenses.Kindly help.

Hi,
You can try the option of running the Trail Balance for Assets and Liabilities with the Opening Balance checkbox and the other for revenue and other drawers without checking the Opening Balance.
Export the values to Excel and consolidate the reports to get the required result(if that is what is needed).
Kind Regards,
Jitin
SAP Business One Forum Team

The operation is not allowed for result set type FORWARD_ONLY

Hi,
I am trying to use scroll insensitive resultset in following manner-
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stmt.executeQuery("some sql here");
rs.last();
but the rs.last() throws this exception-
com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
     at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
     at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
Database version: Kernel    7.5.0    Build 019-121-082-363
Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0    Build 030-000-005-567
This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
Thanks,
Vinod

Hi Vinod,
due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
Regards,
Marco

Chart only for result

Similar Messages

Maybe you are looking for