Chart pasted into Keynote (from Numbers) won't update. Please help.....

When i copy a chart from Numbers 09 and paste into Keynote 09, it won't update (if i make a change in Numbers). It's the same problem if i try and paste a chart into Pages also.  Any advice (i've tried the usual solutions)???

This is the procedure for charts:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Keynote
presentation. After it’s been pasted into Keynote, the chart remains linked to the data
tables it references in Numbers.
To change the chart data, open the original Numbers
document and edit the data there, save the Numbers document, and then refresh the
chart data in Keynote.
To update a chart after you’ve updated its data in its linked Numbers table:
mm Select the chart on the slide canvas and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart
into your Keynote presentation and after editing the Numbers data tables that the
chart references.

Similar Messages

  • Unable to refresh spreadsheet pasted into pages from numbers

    Hi. I'm building a business plan using pages and as we paste the financials into the pages document, I am not able to refresh the spreadsheet in pages when it is changed and saved in numbers. In the help tab and on the forums a "refresh" button is referred to but I can't find it. Some other notes. I seem to have built the plan in "word processor" in pages instead of in "page layout." Can't tell the distinction between the two. Also, I'm taking a full budget in numbers and hiding most of the cells before pasting into pages. Having this capability work as "advertised" would be a huge time saver.
    Thanks.

    I'll tackle one part of your questions:
    *Word Processing mode:* The document has a default area of text inside the set margins. Text fills this area and flows from page to page as needed. The pages form with the text, expanding and retreating with the tide of text within. This text can be indexed in the T.O.C. and may have footnotes. WP mode also has background and master objects which appear on each page and can be deleted from those pages at one stroke.
    *Layout Mode:* The document consists of nothing but individual unconnected pages. Everything on those pages is a floating individual object, with the exception of headers and footers. Text can be linked between textboxes (WP can do this too) by manually linking them, even across pages. Layout mode is much more restricted than WP but simplifies designs by removing some of the clutter.
    You can not simply turn one mode into the other. But you can copy/paste text and objects between them.
    Peter

  • Folio Builder Tools Won't Update - Please Help!

    Hi,
    In need of some urgent help please. We are trying to upgrade departments to v29 or v30 of Folio Builder and run through the process of uninstalling, reinstalling and when we launch folio builder it is always still on the old version.
    We have tried this on a range of Macs, we have logged on with both account with admin rights and the administrator on the Mac - all of which have failed. Examples of the Mac's etc are all below;
    Mac 1;
    OS 10.8.4
    Adobe CS5 Updated to 7.0.4.355
    Current Folio Builder v26
    Mac 2;
    OS 10.8.4
    Adobe CS5 Updated to 7.0.4.355
    Current FolioBuilder v28
    Mac 3;
    OS 10.8.5
    Adobe CS5 Updated to 7.0.4.355
    Current Foilio Builder v25
    Mac 4
    OS 10.6.8
    Adobe CS5 Updated to 7.0.4.355
    Current Foilio Builder v28
    The strange thing is we have got it working, logges on as a user with admin rights on 2 Macs runing 10.9 and 10.6.8
    Please Help!
    Thanks!
    Helen

    Here’s the direct links:
    http://helpx.adobe.com/digital-publishing-suite/help/installing-digital-publishing-tools.h tml
    Did you get the tools from here?
    BTW, in case you’re not aware you should be thinking about InDesign upgrades at this point or you’re going to have a problem come September:
    http://forums.adobe.com/message/6212629#6212629

  • Can't paste into Keynote from Photoshop

    I am trying to copy and paste from Photoshop to Keynote. I know this works because I can do it on my computer, but an associate is trying to do it from her computer and the paste command is grayed out. Only difference is that I am using CS4 and she is using CS3. Any ideas?

    My guess is that she is not coping anything in Photoshop, which is why the paste option is greyed out. Make sure that she has the appropriate layer selected in photoshop before she copies.

  • Pages, keynotes and numbers won't update

    Hi All,
    I'm hoping somebody can help.  I purchased a macbook air in september 2012 with pages, numbers and keynotes preinstalled.  I received a notification of an update to them all but i cannot install the update.  When I click on the update it asks me to log into the itues store which I do then it informs me that I do not own the major version of this software and that error 100 has occured.  I have also tried going through the app store to no avail.  Can anybody help me solve this problem please? 
    thanks

    First, see > http://support.apple.com/kb/TS4236
    Then, if it doesn't work, see if you have hidden Pages, Numbers and Keynote. To unhide them > http://support.apple.com/kb/HT4928

  • I changed user names and apps won't update, please help?

    Can anyone help me, I recently changed my username and email on my iphone, ipad and imac, but the iphone apps are not updating since is asking me for the old user name and password, which I don't remember. Thank you.

    Purchased items are forever tied to the Apple ID that they were purchased with. If you don't remember the Password, log onto Manage your Apple ID, and click on Reset Password: Apple - My Apple ID
    If you don't remember your Security Questions, contact Apple Support to have them reset:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

  • When I copy and paste from an online chart, some cells that had dashes or hyphens in them in the online chart paste into Numbers cells as dates, e.g., 12-13 pastes as Dec. 13, 2012.

    When I copy and paste from an online chart, some cells that had dashes or hyphens in them in the online chart paste into Numbers cells as dates, e.g., 12-13 pastes as Dec. 13, 2012.  I have tried changing the cell formats for that column from "automatic" to "text", but that doesn't fix it.  Is there a way to copy/paste this information without changing the original characters?

    If you know how many rows/columns you are planning to paste, then make the table that big BEFORE you paste.  In addition select all cells in the table by selecting any cell, then type the key combination <COMMAND>+a (for select all.
    Then use the cells inspector to make the cells formatted as text:
    I hope this helps

  • Pasting chart into pages from numbers

    How come I can't copy/paste charts into pages from numbers anymore?  I used to be able to on the last edition now with the new update when I go to paste the chart nothing happens.

    If you are using Pages v5 (any version), then you need to be using Numbers 3+ for copy/paste. If you are using Pages ’09 v4.3, you need to be using Numbers v2.3. Mixing versions breaks things.

  • How do I paste a table from Numbers or Excel into Ibook Author exactly as the original?

    I am new to iMac and Ibook Author.
    I am writing a statistical paper in Ibooks Author.
    I have Chapter heading, now section heading and body.  I want to paste a table from numbers or excel into my iBook as this has the results of my analysis.
    As part of my analysis, I want to copy a 5 column table with 633 rows, which is essentially my table of data.  I have the table in numbers and excel.
    When I copy the table in numbers or excel, followed by pasting (CmD V) into iBooks, I get the first 20 rows in a table format and the remainder of the table is missing.  The table appears to end at the end of the page.
    I can not figure out how to paste the entire data as my table.
    Its holding me back...
    Any ideas?

    Hello Loquitir,
    I am not fully sure if I understand but I gather since there are so many rows only a certain amount fits on a single page.
    How many rows does actually fit on a page in iBooks Author?
    There is a method that would look pretty cool that is used to create a double page spread that would look great but instead of having a double page you could maybe have three or four pages.
    Here is a quick idea that I stuck together, additionally when you are copying and pasting form Numbers to iBooks Author just select the cells that you want.
    Copy and paste within iBooks Author and then go back and get the next row of the table that you want.
    I hope I am clear in what I am describing.
    Regards,
    Nigel

  • Cut and Paste into Keynote

    When I cut and paste an image from another keynote or a full slide (same dimensions), I often get a question mark in a box with the slide/image being 'x' out. How do I resolve? Thanks.

    In Numbers I made sure the table was selected as a graphic item:
    Then copied and paste into Keynote:
    See if this helps!
    Regards,

  • Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

    Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

    Hi Charlotte,
    You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
    Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
    HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
    IE8 doesn't support HTML5.
    To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
    The above steps will hopefully fix your problem. If not, post here again please.

  • How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

    How do I cancel the distance between the numbers?
    I'm having trouble copy phone numbers from the phone book and send it via SMS
    This problem I've found in the Arabic language, numbers appear in reverse
    Please help
    System 6.0.1

    MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
    Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
    Ignore the last frame and first frame indicators.

  • Can not select from my own MV. Please help.

    Hello Gurus,
    I have created a MV with following clauses
    CREATE or REPLACE MATERIALIZED VIEW "OWNER_NAME1"."MV_Name1"
    BUILD IMMEDIATE
    USING INDEX
    REFRESH COMPLETE
    AS
    SELECT column1, column2 .... from table1,table2
    where .....
    I have logged in to DB with the 'owner_name1' schema itself which is the owner of the MV.
    But, when I try to select from the above MV. It gives error "Ora-00942 table or view does not exist"
    I can see the same under 'user_objects' view as an object of owner_name1 schema.
    Could you please help me in understanding where I have gone wrong?
    DB - Oracle 9i on unix platform.
    Thanks in advance!
    Abhijit.

    Oh! I missed to mention the exact steps followed by me which created error for me,
    viz.
    1) I have 2 Database and their users as follows
    bq. i) DB1 in local server - 'localUser'
    bq. ii) DB2 in remote server - 'RemoteUser1' and 'RemoteUser2'
    2) 'RemoteUser2' user in DB2 has 'select' privilage on table 'RemoteTable1' of 'RemoteUser1' ( both are remote DB's users ! )
    i.e. select * from RemoteUser1.RemoteTable1; --works okay when logged into RemoteUser2. no synonyms are created hence using schema_name.table_name convention.
    3) Logged in to 'localUser' in DB1.
    4) Created a DB link 'local_to_remote2' in 'localUser' schema ( in DB1) to 'RemoteUser2' schema (in DB2)
    i.e.
    create database link local_to_remote2 connect to RemoteUser2 identified by password using 'connection_string';
    DBLink was created successfully.
    5) I could select from the tables of 'RemoteUser2' using DB Link. (by logging in to 'localUser')
    i.e. select * from RemoteUser1.RemoteTable1@local_to_remote2 ; --- gives me expected output. no issues!
    6) Now, I created below MV in 'localUser' ( no need to tell in 'DB1' )
    the exact syntax I used is as follows,
    CREATE or REPLACE MATERIALIZED VIEW "localUser"."MV_Name1"
    BUILD IMMEDIATE
    USING INDEX
    REFRESH COMPLETE
    AS
    SELECT column1, column2
    From RemoteUser1.RemoteTable1@local_to_remote2
    where condition1
    and condition2;
    The MV was created successfully, and I could see it as an 'Valid' object of 'localUser' schema.
    i.e. select * from user_objects where object_name ='MV_NAME1' and status ='VALID' --- tells that above create MV is an object of owner 'localUser'
    But, when I try to select from the said MV. it gives me error "Ora-00942 table or view does not exist"
    i.e. select * from MV_Name1; ---- neither this
    select * from localUser.MV_Name1; ---- nor this works :(
    Even when I try to drop the same MV it gives me same error. :(
    Could you please suggest me anything so that I will be able to select from MY OWN MV ?
    Please help Gurus.

  • After install ios 7 wifi won turn on please help....

    after install ios 7 wifi won turn on please help....

    Thanks for the update. I don't know if you have tried this, but I would next I would try removing and re adding the mail account from the phone, then testing the issue again:
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    If it persists, I would next backup your device to iTunes with this article:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    And restore it from your backup with this article:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414

  • My Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

    my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

    Try the basics from the manual.
    restart.
    reset.
    restore.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

Maybe you are looking for