Chart problems in Web-Application Designer

Hello,
I am trying to use CHART in Web Application Designer.
But whatever TYPE I select in that (pie/stack/..),
It shows the report with default chart type..
Then after one /two trials, I have run time error. & Web application Designer crashes. In preview of that chart on template, it shows the chart type I have selected.
What am I missing in my steps. Or is some library missing..
Thanks for you suggestion.
Is very urgent & as I need to show report tomorrow.
Regards,
Santosh

Hi Santosh,
Defining the Width and Height of the Entire Chart
in the Properties
Enter the desired values in fields Width and Height of the window in which you are editing the chart. The entries should be in pixels.
Choose Apply.
The size of the entire chart is changed according to your specifications.
Changing the Size of the Entire Chart with the Mouse
Point to the border of the preview window with the mouse.
The cursor becomes a double arrow.
Click on the border and pull the preview window to the required size.
The size of the entire chart is changed when you let go of the mouse key.
Changing the Size of the Plot Area or the Legend with the Mouse
Click on the element whose size you want to change (plot area or legend).
The element is enclosed in a move handle.
Point to one of the move handles with the mouse.
The cursor becomes a double arrow.
If the cursor does not become a double arrow, you might not have selected the right element, for example the chart area instead of the plot area. In this case click again on the element whose size you want to change.
Click on the move handle and keep the mouse key pressed.
The cursor becomes a cross.
Pull the element to the desired size.
The size of the element is changed when you let go of the mouse key.
Avoid stretching the plot area over the whole area of the chart. The outermost border of the plot area disappears from the visible area in this case and cannot be clicked on again. You cannot change the size of the plot area. If you made the plot area too large by accident, you can undo it with the menu option Undo in the context menu. You can reset the plot area to its original size with Reset, but you will lose all the changes you made to the chart.

It is simple issue D't worry..And one morething is Check the Specific Properties of the Template in Design of the web template.
Thanks
Bhima Chandra Sekhar

Similar Messages

Chart Interface In web application designer?

Hi experts:
I want to know if there is chart interface in web application designer?when i click a node in the chart ,it can triggle a js to jump to another page to show the detail? how I can do it?
I think there do have method to implement,as when I put the mouse on the node of the chart ,the "javascipt:;" shows in the status bar of the IE ,I don't know where can I write the JS ?
Best Regards
chan.

Hi Chan,
1. You type tcode RSBBS in BW system
2. Under Query Tab, there is 'Sender' field. You input the the origin query.
3. Click 'Create' button, you choose the report type that you want to jump into. In you case, if you want to jump into a web template, choose 'BW Web Application'
4. In 'Report' field, choose the destination query/web template.
For more details, please look at this link
http://help.sap.com/saphelp_erp2004/helpdata/en/c9/bc2d38c4b3f205e10000009b38f8cf/content.htm
Hope it will help.
Cheers,
Mona

Edit Chart error in web application designer

Hello,
Whenever I try to edit a chart in de WAD the edit popup window is empty (no edit fields). Does anyone know how to solve this error. BW is running on WAS 6.20 and I am running SAP GUI 6.40 patch 22.
Kind regards,
Raymond Does

Problem solved!
My graphics adapter was set to 128% DPI. This caused 2 errors:
1. The tabs below the template window where "overwritten" by the template window.
2. The "edit chart" popup window remained blank.
After setting my graphics adaper to 96 dpi (default) everything worked fine.

Problem - over lie of data series in Line chart (Web Application Designer)

Dear Experts,
I have created a chart with below requiments from my user by using web application designer.
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
The line chart of Key Figure 3 must always appear in Front then others Key Figures.
Then following by, Key Figure 4. Last is Key Figure 5.
As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
Please advice me if you have any suggestion on controlling the lines order.
Thanks!
~ GP
Edited by: GP Poh on Jun 9, 2010 12:32 PM

Hi Priya, thanks for input.
I think I should further elaborate the problems. Thanks for your highlight.
I have a lines chart with five key figures. So my chart will have five lines.
Some lines from chart will overlap if the data are same.
When overlapping of lines happens, I want to control the order of which series should be appear first.
Likes below example,
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
           KF1 KF2 KF3 KF4 KF5
CW 1    30     30    80    80    50
CW 2    40     50    90    60    90
CW 3    70     50    90    90    90
CW 4    80     70    70    90    70
As you can see, there is overlap in these value.
CW 1 KF3, KF4 -->80
CW 2 KF3, KF5 --> 90
CW 3 KF3, KF4, KF5 --> 90
The order which i want the series should appear first when overlapping.
- KF3 must appear on top.
- Then, follow by KF5
- Last is KF4.
So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
Feel free to give me any input!

Web Application Designer: Change Table Chart to Line Format

Dear Experts,
We, as novices of the web application designer, encounter a problem in using this program. After having created a Chart table, we cannot changed it to the line format.
The things that we perform are as follows:
1) Right click and choose lines format
2) Give it all titles
3) Click Next until finish
However, the result is still the chart table. Is there anyone who kindly give me steps of how to change it.

Hi,
Please try the following:
1. Highlight the chart.
2. In the Web Item Properties for chart, go to Edit Chart.
3. Click on the ... incon
4. Pick Lines
5. Pick a type of Lines graph.
6. Follow the wizard to change the required properties.
This should work for you.
Regards,
Xibi

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

Web Application Designer - Chart (Bar Chart) - Value description of chart

Hi Community,
i use the Web Application Designer in BW 3.5 to create a bar chart with the chart web item (Bar chart). Everything works fine - but in the query the values are 10.000.000 and much more. The description in the chart lokks like 10000000 - Nobody can handle this information in the chart - i could not change the values in the ODS. Is there a possibility to show only steps in 1.000.000 in the chart. In the chart description it should look like 10 and the in a text "in billion".
Is the chart designer in the WAD possible to habdle this ? Hope you have a solution

After applying IGS patch. It is resolved.

Navigational charts in Web Application Designer

Hello all,
I have a question regarding actionable charts in Web Application Designer. For example a user selects a bar in a chart and based on that selection filters to additional reports or changes existing charts/tables in the Web Application Designer? I know you can right click and setup RRI then goto functionality but I would like the capability to click on the bar chart and then proceed with the action.
I know this can be done with Geo enabled Map Web Items where you click on a state/country and drill in for additional information but I'd like to know if it can be done with in charts. I know there is an option in WAD to setup Eventing, maybe there you set the onclick event to do the function?
Any help is appreciated.
Thanks.

Does anyone have any suggestions? I keep reading its possible but found no examples.
Thanks,

Web application designer problem

Hello All,
I design a web application suing web application designer and trying it display using browser.
the browser throws up a error
The requested url could not be retreived.
http://iwsap4.local:8080/sap/bw/BEx?
The browser is IE & the GUI is 6.2.
Have any of u experienced the same problem.
Rgds
Karthik

Hi!
First of all, check transaction SMICM to see if the Internet Connection Manager is running.
As you probably can see, your URL seems to be missing your domain name. Check your icm/host_name_full parameter (menu Go to->Parameter->Display from SMICM).
Regards
Andreas

Opening template issue in Web Application Designer (Loading problem)

Hi,
When i open a query in Web Application Designer through the BWdev, it is opening but when i open a query in Web Application Designer through the BWProduction it is not opening, it is displaying a msg box like this
" Operation Failed! NO detailed error information from backend available ".
In the opening of the webtemplate itself it is showing that box when loading mime type imgs.
If anybody knows pls send msg.
Thanks & Regds,
Giri.

Hi Giri,
I have a similar problem ...
when I give the user SAP_ALL security profile,
the problem is gone,
but I DON'T want to do that...
can you please specify how to give full authentication access to WAD only
thanks a million!
Edwin

Problem with BEx Web Application Designer

Hi,
we use since last week the Web Application Designer with the SAP GUI 7.2.
Now I have a big problem since last week. I can call existing templates but unfortunately not change! I make a change in the template and save it. When I viewed the template again but no change is saved!
A new template I can create and change
Does anyone know the problem? The behavior also occurs with the old Gui 7.1.
Regards
Edited by: Jana VOGL on Oct 18, 2010 10:14 AM

Hi Jana,
Do you get any error before opening of an existing template in WAD? Doesn't look to be a problem with the different SAP GUI versions. Maybe somethings gone wrong with the Java - ABAP config settings or Java Portal communication settings. Maybe you should check with your BASIS team on the same. Tell them what the problem is & they will run a trace to figure out.
--Priya

Web application designer - save view, Export to excel problem

Hi All,
It is very urgent.
We are working in BW 3.5 version.
In web application designer save view, export to excel, export to CSV options are not working.In the report out put if i select any of these push buttons it is giving blank page.
Please give me the solution for the above.
Thanks & Regards,
Vizz

Hi Amer,
There is a web item 'Menu bar' available in WAD 7.0.
There, you can set the Action (Command Triggered) (ACTION) property to Export Web Application and achieve the functionality of exporting to excel.
For more details, see this..
http://help.sap.com/saphelp_nw04s/helpdata/en/b9/a18342fe118c51e10000000a1550b0/frameset.htm
Hope this helps you..!!
Revert back in case of any help needed..
-Pradnya

How to create a date range in Web Application Designer

I am using 3.1 version of Web App Designer. I need to create a report with date ranges. I can get one date to work but not two (I need a start date and end Date). My Query has 0CALMONTH with a variable for Interval. When I select it as a dropdown (??) in Web App Designer, I only get one date prompt in web app designer.
Any suggestions??
Thanks
Kristen

Hi Kristen,
I'm sorry i'm not coming to solve your problem,but for the trouble I have had,and I want to create a date picker in Web Application Designer,so if you have solved the problem ,please email to me? [email protected] ,thx very much!
best regards
zegion chan

Web Application Designer: Column width on analysis_item with BW 7.0

Hi,
I'm new to SAP world and I have found a problem I'm not able to solve. I'm working with the Web Application Designer and I want to modify the cell properties (such as cell width) for aligning different queries. In fact, my question are:

1. Is it possible to hard-code/specify column widths of the analysis_item?
2. The property width of the analysis_item doesn't work, does it?

Thanks for your time and efforts.
Message was edited by:
Daniel Rubio

Hi,
I have just discovered the capability of modifying columns widths with css properties.
So if I add to the head section of the html:
div.prueba2 .urSTTDBdr1
div.prueba2 .urSTTDBdr
div.prueba2 .urSTTDBdr2
And later I put the AnalysisItem between a div class="prueba2" and /div, the columns widths are changed.
Do you know where can I find all the style properties (such as urSTTDBdr1) and its functions?
Thanks

Unable to open WAD (web application designer) in BW 3.5!

Hi,
when i open WAD through menu path (start->programs
->Business explorer->Web application designer), i am getting the following error!
WADConst
Please log on to a Netweaver BI 7.x system. System J2E does not have the minimum version required 70005.
I just can`t understand from where i got this BI 7.x system, when my system is BW 3.5 (NW04 platform).
can any one expalin me what is this problem? and suggest me to over come this problem?
Thanks,
Ravi

Hi Ravi!
I assume that you installed the SAP GUI 6.40 with BI Addin (which contains the BI Frontend for SAP NetWeaver 2004s BI).
In this case, you have a sub folder underneath "Business Explorer" in your startmenu named "Business Explorer (SAP BW 3.x)".
You have to use this version of the BEx Web Application Designer.
If this is not the case, please create a Support Message with all detailed information (backend and frontend versions).
Thank you,
Tobias

Chart problems in Web-Application Designer

Similar Messages

Maybe you are looking for