Chart question with, I'm sure, a simple answer (That I can't seem to figure out). Fixed 'time frame' on time axis.

Hello all.
I'm using charts to record data coming from vibration sensors on a bearing testing rig.
The problem I have (or rather the users have) is that the chart seems to only show a minute or so 'window' of data and it moves along through the day that way.  Adding a scrollbar on the axis helps, but doesn't give a real 'picture' of a specified time range.
We'd like to have the time range of the chart be about 12 hours.  Is there a simple way in properties that you can set the chart to show 'last X amount of time'?  Or at least something greater than a minute!
Thanks for bearing with me.  There seemed to be several posts sorta similar to this, but none really addressing the exact issue.
Still confused after 8 years.

Hi Ralph,
> I'm really, really confused.
Don't feel alone, this was not obvious to me either.
Here is an example in LV 8.5
You can set the log interval and the number of hours to be displayed.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
chart time.vi ‏20 KB

Similar Messages

  • I have Photoshop CS6.  I recently purchased a Nikon D750.  I can't seem to figure out how to update my version to read raw files.  I am not computer illiterate, but not a IT wiz either.  I have a pc with windows 7.

    I have Photoshop CS6.  I recently purchased a Nikon D750.  I can't seem to figure out how to update my version to read raw files.  I am not computer illiterate, but not a IT wiz either.  I have a pc with windows 7.

    Have you updated Camera Raw to 8.7?
    Camera Raw plug-in | Supported cameras
    Camera Raw plug-in installer

  • Can anyone tell me how to upload a url to an image onto facebook the way you could with a pc. Recently switched over to Mac and this is one thing I can't seem to figure out. Basically in Windows you could right click on an image, click copy the image url

    I've recently switched over to a Mac and before in Windows on a pc if you wanted to post an image on facebook you would right click the image you found on the post you wanted to share, then click copy url. You'd simply take that url and put it into the facebook post when uploading an image and that's all. Can not seem to find a way to do it now, other than saving the image to the computer and then uploading that which is not what I want to do. I've searched and searched but can't seem to find a solution other then posting in Parallels Window.
    Any suggestions??

    Thanks brody, I had been able to do that but on my business fb page I often post images and put in the links myself in the descriptions. In Windows you're able to post images by simply pasting in the url but on the Mac I'd have to download someone's image which I'm not comfortable doing so I find myself switching back and forth between the Mac and Windows.
    This link explains what I'm trying to do on the Mac probably in a less confusing way than I just did: http://howto.cnet.com/8301-11310_39-57496509-285/quickly-upload-photos-to-facebo ok-by-pasting-the-image-url/

  • I am running OS 10.5.8 along with ipoto 6. i can't seem to figure out how to upgrade. i can't upgrade to 11 but what can i do??

    i need to upgrade my iphoto on my intel based imac. running 10.5.8. can't seem to figure out how to upgrade this iphoto. i also have a new macbook on which this version of iphoto won't open. the macbook is running 10.6.7. what can i do to run iphoto on both machines??

    iLife 11 and iPhoto 9 require  OS X10.6.3 as a minimum.  So you will need to upgrade your iMac to Leopard or Snow Leopard and then purchase iPhoto 11 from the App Store.  If you can find a copy of iLife 11 somewhere you'll get all of the latest iApps.
    You're new MBP should be running iPhoto 11 and the other iLIfe 11 apps.
    OT

  • Can anyone tell me how to use the loops and backing tracks with a single guitar input? I can't seem to figure out how to set this up

    I am trying to configure Mainstage to input my own guitar and add a backing track from the library or a loop but, I can figure out how to open or add the tracks I've downloaded. Any help would be great

    did you try the PlayBack preset/template?
    once you open the PlayBack plug-in you just load the tracks from the plug-in's menu.

  • Can anyone help me figure out how to sync my ipod with my purchased music?  I have used several computer and at one point synced my ipod with a computer that only had about half of my music.  My other computers are no longer working.  Not sure how to get

    Can anyone help me figure out how to sync my ipod with my purchased music?  I have used several computer and at one point synced my ipod with a computer that only had about half of my music.  My other computers are no longer working.  Not sure how to get my purchased music back onto my ipod?

    Hi kimcinma!
    Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
    Sandygirl

  • I dont remember the first apple id that link with my clash of clans apps. the problem now is i need to link my COC village and it keep saying "please log in with correct game center" is there anyway that i can retrieve my old apple id? please help me

    i dont remember the first apple id that link with my clash of clans apps. the problem now is i need to link my COC village and it keep saying "please log in with correct game center" is there anyway that i can retrieve my old apple id? please help me i dont want to lose my village, i have spent my money on that game to much. hmmm

    thanks mate, but the problem is im using different apple id now, and after about 1 year play coc and today i want to link the village , suddenly coc said that
    thats mean im playing this village with different apple id and it not saved. and the problem is i dont remember the first apple id and password that i use first time to download this game. hmmm it was so confusing, why coc and game center just make this thing saved with a new game center account.

  • I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

    Hello, since nobdy else has replied...
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • How is it possible to download Lion on a Macbook Air. I have the answer that "it can't be downloaded on this computer". I bought it with my previous MacBook and I would like to make DVD of it. Thank you.

    How is it possible to download Lion on a Macbook Air. I have the answer that "it can't be downloaded on this computer". I bought it with my previous MacBook and I would like to make DVD of it. Thank you.

    Check that your MBA meets the System Requirements for Lion..
    See Here under General Requirements...
    http://support.apple.com/kb/SP629

  • When i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

    when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

    Ok, it's just a glitch that it's not auto-rebooting from the disk.
    Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
    Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
    Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way.

  • TS3274 my Ipad 3.6 is reading with syntetic voice all the botton i select, i can't slide pages and i have to tap 2 times on the srcreentoexecute the selected botton what should i do to go back to normal

    my Ipad 3.6 is reading with syntetic voice all the botton i select, i can't slide pages and i have to tap 2 times on the srcreentoexecute the selected botton what should i do to go back to normal

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • Networking question between two ibooks...simple answer I'm sure (doh!)

    I have an older ibook, clamshell, with OS 10.1 installed (no firewire). I also have a newer ibook (14" white) with OS 10.4.7. I want to transfer files from the clamshell to the newer ibook. I understand that I use a crossover ethernet cable to set up a local network. What I want to arrive at is seeing the hard drive icon on the newer ibook desktop and be able to drag and drop from there, but I'm confused about how to get to that point, having read about Public folder (not what I'm shooting for). In the past, I've had a kind tech support help, but unfortunately didn't take notes on getting the hard disc icon onto the [client?] computer desktop.
    Sometimes I think I know a fair amount about my computers, other times---like now--I don't. Thanks in advance for guidance. Paul

    It sounds like you are trying to connect to the
    machine from which you are connecting. If all is
    well, and both machines have sharing turned on, you
    should see 2 machines in the local network browser.
    One will be the one you are on, the other should be
    the remote machine.
    Assuming the local network browser is the window that comes up when I hit command K, I see no list. Both windows (Server Address, and Favortie Servers) are blank.
    Make sure you have sharing turned on, on the remote
    machine.
    Done
    Make sure the two machines have different names (set
    this in the sharing configuration)
    I did this, yes. Rebooted both computers and the new names came up in the Sharing window).
    All i can figure is that perhaps the ethernet cord is either funky, or not what I am perceiving as crossover. I may try a couple of other cords I have as well. I saw the mention of IP addresses, but doesn't this only have to do with sharing via the internet?
    I like to give the machines IP addresses (e.g.
    192.168.0.10 and 192.168.0.20), so that I can "ping"
    one machine from the other machine, to be sure I've
    got connectivity, before I damage the wall with my
    head.

  • I don't know the answers to my security questions, I always put in the 2 answers that make sense but this is the second time that Apple has made me give security questions and I'm very upset that I've had to complain twice now!

    It wouldn't bother me if this was the first time, but it's not. I don't know if I supplied an emergency email or not, if I did I have no idea what it would be. It might even be my dad's and talking to him about this would be a nightmare. The first time this happened I just sent an email explaining what was going on and then they made it so I didn't need to supply a security question to use my iPhone but now it's making me supply one for my iPod, even though it's older than my phone and I've never had to supply one before on that device. It'd be nice if I could have the security questions emailed to my actual email instead of some other bogus email that I have forgotten about. Sorry this isn't the most polite complaint, but I'm pretty frustrated and would like an answer that doesn't involve call apple. I think I have social anxiety because I'm not all that great talking to strangers, even if it's on the phone.

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can get a clue to what it is, and potentially use it, by going to https://appleid.apple.com/ and clicking 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have, or don't want to use, your rescue email address (you won't be able to add/change it until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get them reset (which will be by phone as they need to verify your id - we are fellow users here on these forums).
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps half-way down this page to add/change rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • Can anyone help me figure out if i can use my droid to get online with lapdown ?

    I am having a very hard time with a certain problem. i am trying to cut cost at home and would like to get rid of my internet service with cable co. i am under the impression that i can use my droid to connect laptop to use online. can anyone please help me step by step with this if it is possible? please email me... thanks, kathryn

    what do you think of this...
    The FCC orders Verizon Wireless to pay
    $1.25 million as settlement to the Treasury. This is just a parcel of the
    carrier’s $6.9 billion
    revenue
    it has gained from the mobile market in the second quarter of this year. The
    company is also ordered to notify Google that the objection to the tethering
    apps from the Play Store is now off. This means that when new tethering apps
    become available in the app store, everyone would be able to download and use
    them without additional fees even if they are Verizon
    customers.
    Verizon will, of course, continue to
    charge its customers with their overall data use every month so for those who
    have capped data will not be able to enjoy tethering functionality but the ones
    with unlimited data plans are the luckiest. The FCC’s ruling made everybody a
    winner; consumers under the network would be able to share their connection, app
    developers don’t fear of being blocked when releasing tethering apps, and
    Verizon can attract more customers to subscribe to their unlimited
    plan.
    Read more at http://thedroidguy.com/2012/08/fcc-mandates-verizon-to-allow-tethering-apps-on-android-smartphones/#4ea8gkhCZMf0ypQ5.99

  • Mac 10.8.5 itunes 11.1.1 Sometimes when I drag an album to my desktop the songs fallout of the album leaving me with individual songs not a single album that I  can click to play the whole album.

    Sometimes when I drag an album to my desktop the songs fallout of the album, why? This leaves me with individual songs not a single album icon to click? Can you help me get a consistent single button that I  can click to play a whole album?  [email protected]   mac OS 10.8.5 iTunes OS 11.1.1

    I'm confused. Are you trying to play the album FROM your desktop?

Maybe you are looking for