Chart view - Management Reports - Compliance Calibrator 4.0

Is posible to change scales in the graphics provided by Chart view in the option Management reports in the Compliance Calibrator?
How?
Thanks

Let me change the question: is it possible to generate graphics weekly, for example?
Thanks

Similar Messages

Update on Management View in VIRSA Compliance Calibrator 5.2

Hello,
is there a way to delete the Data for the Management View in VIRSA Compliance Calibrator 5.2 and then make a full new data load.
When I select Full Synchronisation and Management Reports in the Schedule Analysis, the system does not update the Management View correctly, the Management Report shows still roles which are already deleted in the SAP-System.
Thanks

Hi,
You can do a Full sync of Users and Roles first which will be ovewrite and then run the Batch Risk Analysis Management Reports.
You can try this exercise first if it does not work then go ahead with Alpesh's advice.
Thanks
Darshan

Looking for Gantt Chart /Project management reports in jps

Hi all,
I am starting the development of the project management charts (Gantt chart) for my organization. Customer (internal department of my company)wants the solution in Jsp. I request your input for good resource on project management (Gantt ) chart resource to start with in jsp
pl. help me with the code if possible or the already developemnt resource.
thanks in advance,
regards,
Kumarappan.S

http://www.google.com/search?q=java+gantt+chart

Custom report on Compliance Calibrator Job scheduler

Currently in compliance calibrator it is not possible for a user to view the status, success or otherwise, of another users scheduled job or sync unless granting that user full administrator rights.
Please advise if it's possible to expose the underlying scheduled job table for a given system via a custom built static html web page. Can you advise of the table that results would need to be displayed from and whether there would be any drawbacks of this approach, or if others have somehow solved this problem with another solution, please share?!
What are SAP's timeframe's for finer grained security in CC?

below are the tables used for CC:
VIRSA_CC_ACTRULE               SAPSR3DB
VIRSA_CC_ACTRULHDR             SAPSR3DB
VIRSA_CC_ACTVL                 SAPSR3DB
VIRSA_CC_ADMIN                 SAPSR3DB
VIRSA_CC_ALLASTRUN             SAPSR3DB
VIRSA_CC_ALLISTDTL             SAPSR3DB
VIRSA_CC_ALLISTHDR             SAPSR3DB
VIRSA_CC_ALTCDLOG              SAPSR3DB
VIRSA_CC_AUTHHT                SAPSR3DB
VIRSA_CC_AUTHMAP               SAPSR3DB
VIRSA_CC_BKGINP                SAPSR3DB
VIRSA_CC_BUAPPVR               SAPSR3DB
VIRSA_CC_BUMONITOR             SAPSR3DB
VIRSA_CC_BUSPRC                SAPSR3DB
VIRSA_CC_BUSPRCT               SAPSR3DB
VIRSA_CC_BUSUNIT               SAPSR3DB
VIRSA_CC_BUSUNITT              SAPSR3DB
VIRSA_CC_CDHDR                 SAPSR3DB
VIRSA_CC_CDPOS                 SAPSR3DB
VIRSA_CC_CGROUP                SAPSR3DB
VIRSA_CC_CONFIG                SAPSR3DB
VIRSA_CC_CRACT                 SAPSR3DB
VIRSA_CC_CRACTT                SAPSR3DB
VIRSA_CC_CRACTVL               SAPSR3DB
VIRSA_CC_CRPRM                 SAPSR3DB
VIRSA_CC_CRPRMVL               SAPSR3DB
VIRSA_CC_CRPROF                SAPSR3DB
VIRSA_CC_CRPROFT               SAPSR3DB
VIRSA_CC_CRROLE                SAPSR3DB
VIRSA_CC_CRROLET               SAPSR3DB
VIRSA_CC_CRROLEVL              SAPSR3DB
VIRSA_CC_DATAEXD               SAPSR3DB
VIRSA_CC_DETDESC               SAPSR3DB
VIRSA_CC_FLDMAP                SAPSR3DB
VIRSA_CC_FUNC                  SAPSR3DB
VIRSA_CC_FUNCACT               SAPSR3DB
VIRSA_CC_FUNCBP                SAPSR3DB
VIRSA_CC_FUNCPRM               SAPSR3DB
VIRSA_CC_FUNCSYS               SAPSR3DB
VIRSA_CC_FUNCT                 SAPSR3DB
VIRSA_CC_GENACT                SAPSR3DB
VIRSA_CC_GENOBJ                SAPSR3DB
VIRSA_CC_GENOBJT               SAPSR3DB
VIRSA_CC_GENPRM                SAPSR3DB
VIRSA_CC_GENUSR                SAPSR3DB
VIRSA_CC_GPRMLIST              SAPSR3DB
VIRSA_CC_GSEQ                  SAPSR3DB
VIRSA_CC_JOBHST                SAPSR3DB
VIRSA_CC_LASTRUN               SAPSR3DB
VIRSA_CC_LOCKTABLE             SAPSR3DB
VIRSA_CC_LSYSGRP               SAPSR3DB
VIRSA_CC_MGALERTS              SAPSR3DB
VIRSA_CC_MGCRTR                SAPSR3DB
VIRSA_CC_MGMTBU                SAPSR3DB
VIRSA_CC_MGMTTOT               SAPSR3DB
VIRSA_CC_MGRISKD               SAPSR3DB
VIRSA_CC_MGRISKS               SAPSR3DB
VIRSA_CC_MICCTLDTL             SAPSR3DB
VIRSA_CC_MICCTLDTT             SAPSR3DB
VIRSA_CC_MICEXLOG              SAPSR3DB
VIRSA_CC_MICORGDTL             SAPSR3DB
VIRSA_CC_MICORGDTT             SAPSR3DB
VIRSA_CC_MICPRCDTL             SAPSR3DB
VIRSA_CC_MICPRCDTT             SAPSR3DB
VIRSA_CC_MICRMAP               SAPSR3DB
VIRSA_CC_MICUMAP               SAPSR3DB
VIRSA_CC_MITHROBJ              SAPSR3DB
VIRSA_CC_MITMON                SAPSR3DB
VIRSA_CC_MITPROF               SAPSR3DB
VIRSA_CC_MITREF                SAPSR3DB
VIRSA_CC_MITREFT               SAPSR3DB
VIRSA_CC_MITRISK               SAPSR3DB
VIRSA_CC_MITROLE               SAPSR3DB
VIRSA_CC_MITRPT                SAPSR3DB
VIRSA_CC_MITUSER               SAPSR3DB
VIRSA_CC_MITUSRORG             SAPSR3DB
VIRSA_CC_MONAPV                SAPSR3DB
VIRSA_CC_MSG                   SAPSR3DB
VIRSA_CC_MSGPRMS               SAPSR3DB
VIRSA_CC_MSGTYP                SAPSR3DB
VIRSA_CC_OBJTEXT               SAPSR3DB
VIRSA_CC_ORGRULE               SAPSR3DB
VIRSA_CC_ORGRULEM              SAPSR3DB
VIRSA_CC_ORGRULET              SAPSR3DB
VIRSA_CC_ORGUSERS              SAPSR3DB
VIRSA_CC_PRMRULE               SAPSR3DB
VIRSA_CC_PRMVL                 SAPSR3DB
VIRSA_CC_RISK                  SAPSR3DB
VIRSA_CC_RISKFUNC              SAPSR3DB
VIRSA_CC_RISKOWN               SAPSR3DB
VIRSA_CC_RISKRS                SAPSR3DB
VIRSA_CC_RISKT                 SAPSR3DB
VIRSA_CC_ROLEVL                SAPSR3DB
VIRSA_CC_RTMAP                 SAPSR3DB
VIRSA_CC_RULESET               SAPSR3DB
VIRSA_CC_RULESETT              SAPSR3DB
VIRSA_CC_SAPOBJ                SAPSR3DB
VIRSA_CC_SCHEDULER             SAPSR3DB
VIRSA_CC_SUPP_DET              SAPSR3DB
VIRSA_CC_SUPP_HDR              SAPSR3DB
VIRSA_CC_SUPP_TEXT             SAPSR3DB
VIRSA_CC_SYSCRACT              SAPSR3DB
VIRSA_CC_SYSHMAP               SAPSR3DB
VIRSA_CC_SYSRULE               SAPSR3DB
VIRSA_CC_SYSSAPOBJ             SAPSR3DB
VIRSA_CC_SYSTEM                SAPSR3DB
VIRSA_CC_SYSTEMC               SAPSR3DB
VIRSA_CC_SYSTEMT               SAPSR3DB
VIRSA_CC_SYSUSR                SAPSR3DB
VIRSA_CC_TEXTKEY               SAPSR3DB
VIRSA_CC_THREAD                SAPSR3DB
VIRSA_CC_USRMAP                SAPSR3DB
VIRSA_CC_VARIANT               SAPSR3DB
VIRSA_CC_VARVAL                SAPSR3DB
VIRSA_CC_WFOBJ                 SAPSR3DB
VIRSA_CC_XSRULEMAP             SAPSR3DB
VIRSA_CC_XSYSGRP               SAPSR3DB
You can go and check which one contains the scheduling info (VIRSA_CC_SCHEDULER ??)
Hope this helps

Report needed for overall view of update compliancy

I've been asked to provide a custom report to give an overall status for the update compliancy for the servers in place.
Have been fiddling about in sql mgmt studio and kind of understand where to get the information from, but am missing something. so I was hoping someone could point me in the right direction
I realize that this kind of report might take some querying time, but this is what the customer wants: instead of him going to the builtin report compliance 7 (category sw updates - compliance A) where he has to select a collection AND a baseline AND a compliance
status, he wants to obtain a list of all server systems being compliant to some server baselines and a list of all server systems being non-compliant to some server baselines
currently the sqlcode i Have to show the compliant servers, is:
SELECT
     v_R_System.Name0
AS Servername,
v_GS_OPERATING_SYSTEM.Caption0
AS OS,
v_ConfigurationItems.CI_ID,
v_AuthListInfo.Title,
v_StateNames.TopicType,
                      v_StateNames
.StateID,
v_StateNames.StateName
FROM
         v_ConfigurationItems
INNER
JOIN
                      v_AuthListInfo
ON v_ConfigurationItems.CI_ID
= v_AuthListInfo.CI_ID
CROSS
JOIN
                      v_R_System
INNER
JOIN
                      v_GS_OPERATING_SYSTEM
ON v_R_System.ResourceID
= v_GS_OPERATING_SYSTEM.ResourceID
CROSS
JOIN
                      v_StateNames
WHERE
(v_R_System.Client0
= 1)
AND(v_R_System.Operating_System_Name_and0
LIKE
'%server%')
AND
(v_AuthListInfo.Title
LIKE
'%server%')
AND(v_StateNames.TopicType
= 300)
AND(v_StateNames.StateID
=
'1')
ORDER
BY Servername
BUT if I now change the stateid to 2 in the query I get the same amount of rows back (being 134 servers with an sccm client times 4 server update groups)
so my problem is: how and when do i make the correct join here ?

I was thinking that it might be better to use the assignmentstate views, and I quickly came up with this alternative:
SELECT
     v_R_System.Name0
AS ServerName,
v_CIAssignment.AssignmentName
as
'Deployment Name',
v_StateNames.StateName
FROM
         v_AssignmentState_Combined
INNER
JOIN
                      v_R_System
ON v_AssignmentState_Combined.ResourceID
= v_R_System.ResourceID
INNER
JOIN
                      v_FullCollectionMembership
ON v_R_System.ResourceID
= v_FullCollectionMembership.ResourceID
INNER
JOIN
                      v_CIAssignment
ON v_AssignmentState_Combined.AssignmentID
= v_CIAssignment.AssignmentID
INNER
JOIN
                      v_StateNames
ON v_AssignmentState_Combined.StateID
= v_StateNames.StateID
WHERE
(v_StateNames.TopicType
= 300)
AND(v_StateNames.StateID
= 1
OR
                      v_StateNames
.StateID
= 2)
AND(v_FullCollectionMembership.CollectionID
=
N'D01003FE')
ORDER
BY servername
at first glance this produces what I want, let me check with the customer.
you guys agree with that or not?

Unable to view custom report generated in Manage Content and Structure !!!

Hello,
I am farm administrator and I have created report to view all checked out documents for site collection.
as below:
Title : All Checked Out Documents
Query : <Where><Geq><FieldRef Name="CheckoutUser" LookupId="TRUE"/><Value Type="int">0</Value></Geq></Where>
Issue:
When I see the report , I am able to see all checked out documents.However site admin and owner is unable to view this report.
They are getting following message:
There are no items to show in this view.
Would you please let me know what can be the root cause and how can I resolve it ?
Thanks and Regards,
Dipti Chhatrapati

Dipti,
This is by design and Unfortunately, no one else can see the documents because they have never been checked in. Even the site owner
can't see the documents. However Site collection admin can see everything.
Fortunately, there is an easy way to handle this situation. The site owner can go to the Document Library Settingspage and click on the link to Manage
checked out files.
From here, he can select the documents and click the Take Ownership of Selection link.
Few links: CHECKING OUT DOCUMENTS =
NO ONE ELSE CAN SEE THEM!
Hope it will help :)
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

View/Access Reports in Report Manager

Hi,
Please let me know how a differnet user can view the reports run through the report manager.
Thanks,
MPH

Duplicate post.
Report Manager
Report Manager

Customizing WAD report chart view with input types(pie, line etc..)

Hi All
I am very much new to WAD, now i have a requirement where in i am viewing a query output as a chart, but here the added features that need to be embedded are, adjacent to the chart view i have 4 radio buttion say
1)area view
2)coloumn view
3)Line view
4)Pie view
Based on the radio button selection the chart view must change, so please guide me how can i achieve this funstionality.
Regards
VK

Hi VK,
1>>> use container in that container use all the 4 charts
2>>>make the 2> 3> 4> charts hidden
3>>> use 4 radio buttons beside the chart give names as area column line and pie
4> for area buttom use the command SET_ITEM_PARAMETERS make area chartvisible
    you have add three more command for this button
^^^^^^^ i.e 1> to hide colomn chart
^^^^^^^^^       2> to hide line chart
^^^^^^^^^       3> to hide pie chart
5> for colomn buttom use the command SET_ITEM_PARAMETERS make colomn chart visible
    you have add three more command for this button
^^^^^^^ i.e 1> to hide area chart
^^^^^^^^^       2> to hide line chart
      ^^^^^^^^^ 3> to hide pie chart
6> for line buttom use the command SET_ITEM_PARAMETERS make line chart visible
    you have add three more command for this button
^^^^^^^ i.e 1> to hide area chart
     ^^^^^^^^^ 2> to hide column chart
    ^^^^^^^^^   3> to hide pie chart
7> for Pie buttom use the command SET_ITEM_PARAMETERS make Pie chart visible
    you have add three more command for this button
^^^^^^^ i.e 1> to hide area chart
^^^^^^^^^      2> to hide column chart
   ^^^^^^^^^    3> to hide Line chart
check the following links before , it will help you to start
http://help.sap.com/saphelp_nw04s/helpdata/en/43/934291ff0b274ee10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/935812ff0b274ee10000000a422035/content.htm
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0f7d724-c0f0-2d10-828f-be249d59b5c3
Regards,
Ranganath

Error opening a Manage Report template with Formulas and Summation

Hi Expert,
My j2ee web application is setup is such a way that when there is NO connectivity to the Crystal Report Server XI, it will use the Crystal Report for Eclipse functionality and opening report templates located in the relative path - This works fine.
But when there is a connectivity to the CMS Server, I have this error when opening a manage report in Crystal Report Server XI that contains formulas and summations. But for other reports like chart and listings no problem.
This code triggers the error:
ReportClientDocument clientDoc = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
I found out there's a conflict between CR libraries for Eclipse and libraries for RAS Enterprise Server XI.
How can I solve this issue so that I can support the two scenarios - with or without CMS connectivity, I can still view reports.
Error Stack Trace:
com.crystaldecisions.sdk.occa.managedreports.ras.internal.a: Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed detail:Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. The exception originally thrown was com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
Hoping for your answers.
Regards,
Rulix Batistil

You must isolate the CR4E and RAS SDK jars using separate classloaders - simplest is have separate apps, if rolling your own class loaders is out of project scope.
They do not work together.
Sincerely,
Ted Ueda

Compliance Calibrator: Background jobs didn't bring in the correct data.

Hi Gurus;
In Compliance Calibrator; background jobs were last run on 5/27/09 but the management report shows that the summary is as of 5/20/09. That should have been updated uptill 5/27/09 and the new number of conflicts should have come up, which it didn't. What can be the problem?
Thanking you;
Raja

Hi Harleen;
This job was actually set by the client. So when I went to check the parameters of the jobs, I found that the field MGR_ANALYSIS consists of Field value "N". Does this mean that the Management Analysis box was not ticked when this job was scheduled?
Regards;
Raja

Management report - Role analysis

Hi guys,
So here's my issue, I inadvertently scheduled a role analysis without specifying the project roles which are about 200 +. Thus, role analysis under the management report view constantly shows the results of the analysis of about 2000 + roles which is a combination of both SAP delivered roles and project roles. Every subsequent batch and full syncs I've scheduled seemingly gets aggregated with the initial sync which has all the SAP delivered roles.
Question.
1. I understand I have to purge the database at the backend. The basis team strongly advices against this. Can I possibly purge the role analysis in the CC front end? What are my options here? I only want to see the role analysis of our 200 + project developed roles.

Dear Adewale,
I understand your requirement, please check the following.
There are two ways to see Role based Risk Analysis, and both depends upon your requirements.
1) Suppose, You have a requirement to see consolidated Role based Risk Analysis of a particular system. That means you want to generate a report for all the roles and want to see which roles are violating, mitigated, critical, high, medium and low in your system. For this you can go to Informer tab and generate Role based Risk Analysis Report.
In this report the advantage is that you get a pie chart and bar graph. But you can not generate reports on the basis of some particular roles, because there is no such functionality provided in CC 5.2
2) In other case if you wish to generate a Role based Risk Analysis report by specifying a condition like (z*), Here you also have option to select Report Type, risk Level etc but yes, there is no functionality to see the result in graphs or charts in CC 5.2
So in both ways your requirement to generate project roles risk analysis report in graph format can not be achieved. For this you only have two options.
1. Raise an enhancement request to SAP Support.
2. To go with the second option mentioned above, select report type to be management summary and export the results to excel and generate graphs manually.
I understand this is painful.
Best Regards,
Amol Bharti

SAP GRC Access Control - Compliance Calibrator - License Cost

Dear all,
I have some questions on Compliance Calibrator implementation.
1. Do we have to pay additional cost for the license to implement Compliance Calibrator?
2. Since SAP GRC 5.3 is just released, which one do you recommend? SAP GRC 5.2 or 5.3?
3. What would be the major difference between Compliance Calibrator in GRC 5.2 and 5.3?
Best regards,
Rolando

Hi Rolando-
1. Yes, there lies some license cost and the amount should not as much as taking SAP R/3 license. I am not sure of exact amount but its nominal as compared to other SAP products.
2. SAP always recommend for the latest version available and why not one would go for latest version if you are paying something for that.
Also, it depends on your existing R/3 version and its compatibility. In short run, you can choose per your existing versions but in long run everyone has to move to latest version. Say for example whoever is using SAP R/3 technology with whatever version, they all need to upgrade to ECC6.0 by 2011 with extension upto 2013. I am not sure of any such information about GRC AC though.
3. Some enhancement have been done with CC 5.3. Those features include-
1. Risk analysis for SAP Enterprise Portal and UME
2. BI integration for custom reporting
3. Reporting enhancement features include additional auditor, business manager and IT reports
4. SOD management by exception. Can be integrated with workflow.
5. Import/Export of configuration data
6. Migration scripts
7. Download and print capability on every report.
Some performance improvements-
1. Concurrent risk analysis.
2. batch mode risk analysis
3. Improved memory mgmnt etc.
Hope it gives you now some more visibility.
Cheers!
Ashok

Deleted Roles appearing in Compliance Calibrator (Informer Tab)

Hi
We had deletd some roles from SAP . These roles still show up on complaince calibrator as having high risk violations.
This role was delted a month ago and we also have completed as full sync of the system . Still the roles are appearing in compliance calibrator in the informer tab.
Coudl you please let me know how we can avoid this?

instead of running a full synch I would attempt running an incremental synch and run the management reports again. I believe this should do it. I am not sure why the full synch would not work.

Issue with Compliance Calibrator 5.2 SP9 Background Jobs

Hello,
I'm having an issue with Compliance Calibrator 5.2 SP9 where If I run a role analysis as a background job that has the same parameters as a previously run role analysis background job, the second job that is run will display a failure message. It does not appear to matter if the similar background jobs were run by the same individual or separate individuals. As long as the job that was previously run is still in the background job history, than any job with the same parameters run by a user will fail.
Is this normal operation for CC?
Is there a configuration change that could allow a job to be rerun in the background multiple times?
Is there a fix for this issue in a later support pack or with upgrade to 5.3?
Thanks for the help it's much appreciated,

To better clarify what is occurring, the 1st job will run and complete successfully and return/display the appropriate results correctly. The 2nd job will than be subsequently kicked off and finish same as with the previous job except when you open the background results no data is displayed and the message at the bottom reads: Failed to display result. To make more sense of what Iu2019m doing, these are the logical steps Iu2019m following:
1. Select Role Level analysis
2. Enter parameters for analysis
3. Schedule background job to run immediately
4. View background job results (successful job and correct results)
5. Select Role Level analysis (with same or any other user)
6. Enter same parameters as step 2 for analysis
7. Schedule background job to run immediately
8. View background job results (successful job, but the error message: u2018Failed to display resultu2019, instead of seeing the CC reports)
I believe the error is somewhere in the running of a job with the same parameters (Same Role and same Report Type). If I delete the previous jobs from the background history that have the parameters Iu2019m using and try the analysis again, a third time, with the same parameters as before, it will run successfully and display the correct results.
Is this normal and acceptable operation for CC5.2 SP9?
Is there a configuration change that would allow a job to be run in the background multiple times with the correct CC results?
Is there a fix for this issue in a later support pack or with upgrade to 5.3?

GRC 5.3 - Management Report Error: Cannot assign an empty string to host..

Good day Kiran Kandepalli and Others.
I have successfully executed the background jobs -
Full User, Role, Profile Synchronization & a
Full Batch Risk Analysis
When I run the Management Reports I receive the following error -
Error while executing the Job:Cannot assign an empty string to host variable 10.
Has anybody had this error message before?
When I check table VIRSA_CC_PRMVL, variable 10 is set to No in Nullable collumn.

Hi Sahad,
Thanks for your response. I have checked the usr02 table and logs and do not see any empty fields or strings. This process worked for 5.2 but fails in 5.3. Here is the excerpt from the log for the Management Report run. It seems to fail consistenly at a certain point. If I knew what the batch job was looking for in host variable 10 I might be able to resolve the problem. It seems to fail when it starts to report on users.
Thanks.
Dan.
INFO: -
Scheduling Job =>935----
Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:935 (RISK_ANALYSIS_BATCH) - tst
Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 935 Status: Running
Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob findJobHistory
FINEST: --- @@@@@@@@@@@ Find the Job History -
1
Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is tst started :threadid: 0
Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=935, status=1, message=tst started :threadid: 0
Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchSyncAndAnalysis
INFO: --- Batch Sync/Analysis/Mgmt Report started ---
Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis runBkgMgmReport
INFO: --- Running the Background Management Report -
Jan 23, 2009 8:04:39 AM com.virsa.cc.xsys.mgmbground.dao.MgmStats execute
INFO: Start insert int cc_mgriskd all violations.... 1232726679108
Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis runBkgMgmReport
WARNING: Exception in Management Report Job: Cannot assign an empty string to host variable 10.
com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 10.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
     at com.virsa.cc.xsys.mgmbground.dao.MgmStats.execute(MgmStats.java:314)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.runBkgMgmReport(BatchRiskAnalysis.java:1182)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1430)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: Cannot assign an empty string to host variable 10.
com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 10.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
     at com.virsa.cc.xsys.mgmbground.dao.MgmStats.execute(MgmStats.java:314)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.runBkgMgmReport(BatchRiskAnalysis.java:1182)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1430)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 935 Status: Error
Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:Cannot assign an empty string to host variable 10.
Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=935, status=2, message=Error while executing the Job:Cannot assign an empty string to host variable 10.
Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>935----

Chart view - Management Reports - Compliance Calibrator 4.0

Similar Messages

Maybe you are looking for