Charts creation with Webdynpro for Java

Hello everyone,
I am really new to SAP technologies and I have to create charts showing statistics for an application based on CE 7.1 and Webdynpro for Java.
I would like to have some inputs about the best way to achieve this, I saw it exists a business graphics UI and flash islands to use flex with webdynpro.
Thank you for your opinions
Regards,
Joh

Hi Johann,
Please refer to this link might help for your requirement:
[Click Here|http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproforJavaDemo+Kit]
Hope it helps
Regards
Arun

Similar Messages

Flex with webdynpro for java using Flex Island

Hi Friends,
I am on Netweaver/SAP Enterprise Portal 7.0 SPstack12, I am developing UI for BI reports using VC, I am interested in developing UI using flex and want to integrate those apps with EP, I came to know flux Island supports flux with webdynpro java, basically I am a webdynpro for java developer, I want to develop flux applications with webdynpro for java in NWDS. And i want to know how to use Flex Island with webdynpro for java. So could u please post some useful links.
Thank in advance
Regards
samba

Hi
If you want to try out using ADOBE Flash Islands with WDJ, you would need to download SAP CE 7.1 EhP1 trial version, if not done so already.
The following link may help you in building the WDJ component with Flash Islands..
The specified item was not found.
If you donot want to develop the Flex project you can download the .swf file provided by the SAP mentors:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163
Thanks.
Chitrali

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Open PFD from R/3 with WebDynpro for Java

Hi All,
Could any one of you please suggest on how to open a pdf from R/3 with a WebDynpro (JAVA) application. For example I was trying to display one PDF-Document from Records Management in my Web Dynpro.
Does anyone have a good idea how to solve this problem? Thanks.
regards
Sharam

Hi,
Elobarate your question once again.
your plannig to open the PDF in Webdynpro getting From r/3 system.
Or you are getting the data from R/3 that data wanted to put in PDF.
Let know clearly such we can go ahead.
Thanks,
Lohi.

Dynamic table data isn't transfered to the context, with webdynpro for java

Hi,
I'm using LifeCycle designer 7.1 and Adobe reader 7.0.5.
I'm trying to make a dynamic table in a PDF form, that will be related to a table in the context.
I've designed the context like it says here: Dynamic Table - same data repeating in all rows
I made a dynamic table and related the cells on the row to the context, by dragging the variables from the DataView into them.
The table is related to TableList, the row to TableWrapper[], and the cells are related like this: TableData[].ItemName
And there's a button which adds a row to the table.
And for some reason, that's not working; When hitting the Submit to SAP button, it doesn't appear as though the data was transferred to the WebDynpro context.
Can anyone help me with it please..?
By the way - I tried using the SAP standard subform controls, the 'Insert Remove Move' control.
When trying it through the PDF preview, it doesn't work - whatever I click displays an error message, and when it runs from the browser - It automatically searches for an update for Adove Reader (I use 7.0.5).
Is it supposed to work only with version 8 of the Adobe Reader?

Well, I reinstalled ACF, and now the Submit button works, and the Insert Remove Move buttons work as well.
But the table context still doesn't work.
I had put some values in the context, in DoInit, and they appeared in the table in the form, but when I changed them in the form it didn't affect the context at all.
There's a simple attribute value related to a text field, which IS affected when changed in the form, and the Submit button is clicked. Only the table doesn't work.
How can I make it work?
Thanks,
Udi Dekel

App page link to "federated portal" menu with webdynpro for JAVA

Hi experts,
we have completed the federated portal configuration from EP to CE7.1
Clients just log in EP, see both EP and CE content.
Now, clients want to make a index page with some link and fashion pictures pointed to exact EP or CE page.
I found a method "WDPortalNavigation.navigateAbsolute" which can do this in EP.
but when i change content path to my CE content, the method failed.
WDPortalNavigation.navigateAbsolute(
 "ROLES://NetWeaver_content_producers/<my CE producer's name>/portal_content/...<my path>",
 WDPortalNavigationMode.SHOW_INPLACE,
 null,
 null,
 WDPortalNavigationHistoryMode.ALLOW_DUPLICATIONS,
 null,
 null,
is there something wrong calling the method? or anything else?
Thanks in advanced!
Fishy

any idea?
thanks.

How to start to work on MDM JAVA API by using webdynpro for java

Hi all
I have basic idea on MDM business package thru portal by using standard iViews.
now i am planning to work on MDM JAVA APIs by using Webdynpro for Java as UI.
1) can you please share the required documents on the same. how to start working on this by using MDM JAVA APIs in webdynpro for java
2) what are the JARs files are required and how to integrate those jar files into webdynpro for java application.
3) is there any SDN help on MDM JAVA API with webdynpro for java? . can you please send the link on the same.
4) can you please help by providing sample code on how to use JAVA APIs for retrieving,deleting,inserting and Updating the data in the database.
if anybody helps on the same then it is the great help to me.
points are always rewardable...
Regards
Suresh babu

Hi Suresh,
You can have the MDM JAVA API javadocs from the link
http://help.sap.com/javadocs/MDM/SP06P2/index.html
There you can see a package named com.sap.mdm.examples.The classes in it contains some examples using which you can start understanding the code.
You need to have MDM JAR files for it. And these JAR files to be used at build time can be added to the project thru :-
Right click on project-> properties->Java Build Path - > Add external JARs
At run time you can add them the reference in
Right click on project-> properties->web dynpro references->library reference.
Thanks
Namrata

Instalation to try webdynpro for java

Hi Experts,
I'm trying to perform an instalation to make some tests with webdynpros for java.
In our office we have a 2003 Server Standard edition, but I don't know if I have to install the programs on the Server or on a Personal Computer. I don't know anything about sistem managing or administration
We have downloaded this tryal versions:
- SAP NetWeaver 2004 SP16 --> version java+webdynpro
- SAP NetWeaver 7.0 (2004s) SP9 --> version JavawebdynproComposite Application Framework
A workmate of mane have tryed to install them but he says that he can't complete the installation c'ause an error is recieved at the middle of the instalation.
Does anybode please can give me a clue about how do I have to instal it, where; and wich version? The tests i want to make are about creating webdynpro applications with netweaver developer studio.
Thank-you very much.
Artur.

Hi,
You can get installation guides for every installation you require in service market place.
Try refering this link
https://service.sap.com/instguides.
Hope it helps..
Regards,
Srujana.

Adobe Interactive forms & WebDynpro for java problem with IE7 and IE8

I have Interactive form ui-element in WebDynpro for java (ver. 7 SP 10) application. It works fine with IE6, but in IE7 (or IE8) it doesn't show that ui-element at all. We have tried to change IE7 security & advanced settings, but we have not made any progress. We have also tried to install/uninstall different Adobe reader versions etc.

I know a little more about the problem now. After viewing the XML source I change the property of the inputfield.
It was like this:
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="ReadOnly">
but i changed the access to be nonInteractive
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="nonInteractive">
now view2 shows the linebreak as in view1... Buut! when im going back to view1 from view2, the linebreaks gets converted into spaces
thats pretty wierd, aint it?

Problems between Xcelsius and WebDynpro for Java

How should I do to show Xcelsius in WebDynpro for Java?
How should I transport data between Xcelsius and WebDynpro?
How should I control WebDynpro with Xcelsius?For example,firing plugs in Xcelsius like in WebDynpro to change one view to another.
How should I do to execute a Java method in Xcelsius?For example,scheduling a job on clicking a button in Xcelsius.
Besides these,I also want to know the same problems between other BOE contents and WebDynpro for Java.
Regards,
Abe

Hi Pradeep:
Well that purely depends on the business application (project) your client is proposing. Following are very few factors which will drive for creating web-based applications:
VC: it's a UI modeling tool (non-programming) for creating rapid creation of web-based applications.
WD: its a powered by Java and ABAP with which you can create robust business applications.
If your client is very choosy about rapid application development, reporting, rich user interface, to reduce TCO then VC is the choice. Or if the project contains typical integration with SAP and non-SAP systems, complex business logic development, integration with WCM systems...etc then WDJ is the option.
If youve some sort of custom development with facilitating the Development Infrastructure (NWDI) then WDJ is the only option I could say.
We hope with NW CE 7.1.1(referred by Priyanka Singh) tighter integration between these TWO tools may over come the ambiguity of using them.
Tnx,
MS

Reading/Writing .xlsx files using Webdynpro for Java

Dear All
I have a requirement to read/write excel files in .xlsx format. I am good in doing it with .xls format using jxl.jar. The jxl.jar doesn't support .xlsx format. Kindly help me in understanding how do I need to proceed on reading/writing .xlsx files using Webdynpro for Java.
Thanks and Regards
Ramamoorthy D

i am using jdk 1.6.22 and IBM WebSphere
when i use poi-3.6-20091214.jar and poi-ooxml-3.6-20091214.jar to read .xlsx file. but i am getting following errors
The project was not built since its classpath is incomplete. Cannot find the class
file for java.lang.Iterable. Fix the classpath then try rebuilding this project.
This compilation unit indirectly references the missing type java.lang.Iterable
(typically some required class file is referencing a type outside the classpath)
how can i resolve it
here is the code that i have used
public class HomeAction extends DispatchAction {
     public ActionForward addpage(
                         ActionMapping mapping,
                         ActionForm form,
                         HttpServletRequest request,
                         HttpServletResponse response)
                         throws Exception {
                         String name = "C:/Documents and Settings/bharath/Desktop/Book1.xlsx";
           FileInputStream fis = null;
           try {
               Object workbook = null;
                fis = new FileInputStream(name);
                XSSFWorkbook wb = new XSSFWorkbook(fis);
                XSSFSheet sheet = (XSSFSheet) wb.getSheetAt(0);
                Iterator rows = sheet.rowIterator();
                int number=sheet.getLastRowNum();
                System.out.println(" number of rows"+ number);
                while (rows.hasNext())
                    XSSFRow row = ((XSSFRow) rows.next());
                    Iterator cells = row.cellIterator();
                    while(cells.hasNext())
                XSSFCell cell = (XSSFCell) cells.next();
                String Value=cell.getStringCellValue();
                System.out.println(Value);
           } catch (IOException e) {
                e.printStackTrace();
           } finally {
                if (fis != null) {
                     fis.close();
            return mapping.findForward("returnjsp");

Creating a multi level views in webdynpro for java

Hi,
My requirement is i need to create a webdynpro application with 3 screens .
first screen will be a search screen for example with first and last names fields .so when i give search criteria it will display the search results in the second screen below the first screen(search screen) and some of the fields in the result screen wil have a hyperlink so when i click on that it will display the details of that row in the details view below that results view
in simple terms
search screen
results screen
detail screen
please let me know the way to develop this kind of application in webdynpro for java
points will be rewarded for the helpful answer.

Hi Bala,
Here you have two options.
I. Display all views at one time:
Open Navigation Modeler,
Create a ViewSet with properties column 1, rows 3.
1. In the tool selection list, select Embed View.
2. In the layout area of the Navigation Modeler, click on the cell of the view set in which the view is to be embedded.
3.In the wizard, choose Embed New View and, in the next window, enter a name for the view.
4.Use the package that you entered for the component definition or select another package by choosing Browse.
5.Choose Finish.
Create 3 views with names search screen,results screen and detail screen.
Use plugs to navigate.
II. Display one view at a time:
Create a main View. Insert ViewContainerUIElement
Open Navigation Modeler.
1. In the layout area of the Navigation Modeler, click on the cell of the ViewContainerUIElement.
2.In the wizard, choose Embed New View and, in the next window, enter a name for the view.
3.Use the package that you entered for the component definition or select another package by choosing Browse.
4.Choose Finish.
Create 3 views with names search screen,results screen and detail screen.
Use plugs to navigate.
You can use visibility property also as another option to show/hide the views in both of these.
regards,
Siva

How can I read cookies in WebDynPro for Java

Hi,
in WebDynPro for Java I found a possibility to to get a "request-object" like the standard "HttpServletRequest-object"
IWDProtocolAdapter protocolAdapter = WDProtocolAdapter.getProtocolAdapter();
IWDRequest request = protocolAdapter.getRequestObject();
debugEnabled = (request.getParameter("Debug") != null);
With this request-object I can read request-prameters but I couldn't find a possibility to get cookies from the request.
There is no method like the "getCookies().method" in the HTTPServletRequest-Interface:-((
Has anybody an idea, how I can read cookies in WebDynPro for Java ?
Regards
Steffen

Hi,
This is the latest update I could look for regarding cookies and webdynpro.
Panic - WebContextAdapter is depracted - no more cookies now?
Regards,
Harini S

How to use BAPI in webdynpro for java application

Hi all,
Please help in getting started with calling a BAPI in a webdynpro for java application. I have got only the content needed to call a BAPI in a webdynpro for abap application but not in java. Kindly provide me some documents if possible.
Thanks in advance

Hi ,
U have Created One Bapi u want to work with web Dyn pro for java Application Right .
U need the Following
1) NWDS (Netweaver Devloper Studio )
2) jdk1.4 or Above installed in your system .
After Installation of NWDS .
1) Just Take J2EE Enginee Details
a) Go to Window -> preferences -> J2ee Enginee - > give ur port number , Host name Details . and click finsh .
Go To Web Dyn Pro Perspective Click onj2EE engine .
Click On Refresh U will see Green Colour button .
Now ur Ready to import Ur BAPI .
1) Go to File -> New -> Project - > Web Dyn pro Project -.
Give Name , pkg Name Click On Finish .
2) Expand ur project hirarchy -> go TO Application -> Right Click -> Create Application - > Give Application name and Pkg name -> Click on Finish .
3) Now ur View And Controller Are Created by Default .
4) Go to Model-> Right Click on it-> Create Model -> Give Model Name & Pkg name Should diff from Application pkg the Click On Next
a) Here u have to Two JCo Destination Name Like Model Data And Meta data & R/3 System Details like System Number , Host name Etc -> then Click on next .
b) Here u will text filed where u want to search for ur Required BAPI . Type ur BAPI Name Click on Search . Ur bapi will be displyed In Down . click on Next .
c) Now Ur model is Importedint into NWDS .Map ur model data To Controller and Controller Element to View Elements .
After ur Model .
Go to -> Project Name -> Right Click -> go to -> Deploy New Archive .
after wards u have to go Apllication -> Right click -> deploy and Run .
ur output will be displyed thru Browser .
Thats it
Regards ,
venkat

Books and Documentation on Webdynpro for Java

Hi,
I'am planning to start developing Webdynpro for Java applicatios.I know only Core java and iam not familiar with J2EE.I need some help on this.Any books on webdynpro for java basics and any documentation avail and prerequisite befor going to strat developing Webdynpro for JAVA
Can anybody please give me suggestions on this.
With Regadrs
Praveen

What is Webdynpro?
What is Web Dynpro?
Webdynpro Sample Applications and Tutorialshttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
SAP WebAs Samples And tutorials
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7d646a6c-0501-0010-b480-bf47b8673143 [original link is broken]
Basis Webdynpro tutorials....
http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/1fc0bdb1cdd34f9a11d5321eba5ebc/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/d08342a7d30d53e10000000a155106/frameset.htm
Web Dynpro Sample Applications and Tutorials:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d [original link is broken]
http://searchsap.techtarget.com/searchSAP/downloads/SAPPRESS.pdf
Check the following thread u can get lot of materials,
WeB Dynpro Documents
Refer these linkshttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/web%20dynpro%20tutorial%20and%20sample%20applications.faq
Why WebDynpro ?Why WebDynpro ?
Why webdynpro and not BSP or JSP?
Why webdynpro and not BSP or JSP?BSP to WEB Dynpro
BSP to WEB Dynpro
Benifits of using Webdynpro Benifits of using
Webdynpro
Java vs. ABAP WEbDynpro Java vs.
WebDynpro ABAP
regarding Java related webdynpro
Regarding Java related Web Dynpro vs. Struts - a few questions
Web Dynpro vs. Struts - a few What kind of applications are being developed with Web Dynpro?
What kind of applications are being developed with Web Dynpro?
http://www.sappro.com/downloads/OptionComparison.pdf
Hop this will helpful for u..
Urs GS

Charts creation with Webdynpro for Java

Similar Messages

Maybe you are looking for