Charts in Report Designer - choosing columns and rows for categories

Hi,
I am trying to create a pie chart in report designer from a data provider which has 4 rows and 4 columns. As a default the chart created is using the 1st row for data and the four columns as categories.I want the pie chart to use the first column for categories and 2nd column for data. How do I change the default chart behaviour?
Best regards,
Jai

Hi Jai,
take a look at:
"Class 1 Chart Types" in http://help.sap.com/saphelp_nw04s/helpdata/en/c9/08533b97037963e10000000a114084/frameset.htm
Link is regarding WAD web item but editing is the same in Report Designer.
Here you will get information with example query for editing pie charts and what is possible or not.
like:
Structure of the Data Provider for a Pie Chart
In a pie chart, the underlying table has only one row. The values in the columns form the pie segments.
If the table contains more than one row, the additional rows are ignored when the table is converted into a chart. However, you can define which row is to be used (see below).
Additional the link describes how to build the query for your requirement.
Regards
Andreas

Similar Messages

Freeze columns and rows for scrolling in HTML ouput

Hi everyone!
I have an BIP report with a crosstab generating a HTML output and the table tends to get very big in the ouput, both vertical and horizatal wise, and I am looking for a way to freeze the first column when scrolling horizontally and the header row when scrolling vertically.
Is there a way to accomplish this? It would help me a lot!
Thanks,
Magnus

I saw in another tread (Freeze column headers in a table and enable vertical scroll bar on the rows that this user have seen a demo of what I want to accomplish. Nothing that you are aware of?
Or, can it be done with Excel output?
/Magnus

Columns and Rows for Text (invisible table)

I am trying to create text on 15 rows in 3 columns in an invisable table for a drinks menu with corresponding drink sizes (ml) and prices. I used the option Type > Area Type Options and added a grid. I encountred 2 problems:
Firstly the grid disappears (or I just cannot view it) , and secondly, i do not want the columns to be of equal size - I am looking to achieve a 60%-20%-20% ratio. I cannot find a way to resize the column widths, Would be grateful for any advice

Hi Steve, thanks. I get you as far as 'Split into Grid'. I still cant figure out how to increase the size 1 whole column (of 15 rows) in one sweep and to decrease the size 2 other columns (of 15 rows each) as one would do in an xls. chart. To widen each one seems tedious and with transform the cells are widened, but the other 2 do not automatically decrease in size. The The whole idea of the operation is simply to align the drink item to the amount (in liters) and price (horizontally) but keeping the cell content alignment (vertically uniform throughout the columns Drink name = align Left and Drink amount = align Righ as in Example which I created from a xls chart .

Increase report size (columns and rows) in portal

Hi all,
Hope someone can help me with this. I don't have any experience administering the reporting portal, hopefully this is an easy question.
The portal displaying BI queries shows only about 10 columns and 10 rows at a time. This is annoying since users have to scroll around to see all the rows and columns. Where can I adjust the number of columns and rows displayed?
Thanks,
M.

Hi M.B.
Open WAD ( Bex Web Application Designer ) in which , you have assigned BI query. follow the steps for changing no of rows & columns.
Step 1.    Properties   - > select Web Items parametes.
Step 2.   select Ananlysis
Step 3.   Scroll down -> paging -> here you can change no of rows & columns.
Hope it will serve your query. If problem solved , closed this thread .
Regards,
Anand Mehrotra.

FREEZE COLUMNS AND ROWS IN WEB REPORT - PLEASE ADVISE ME

Hi Experts,
I have a web template that contains a query. My customer wants to freeze columns and rows in this report like we do in Excel. I know that in BW 3.5 this is not a standard feature of Table item. In forum I have found some messages regarding with this issue. I inserted a JavaScript code that I have found in forum, but this does not help. A codewriter wrote some other JaveScript for example alert(), that works but some part of taken code from forum such as defined functions do not work.
Other solutions advised in forum such as fixing row numbers or column numbers do not fix my problem.
My questions:
1 - In new version of BW, BI 7.0 have this issue with WAD in standard been solved?
2 - Does it really possible at the same time rows and columns to freeze? I want to freeze 2 rows from top, 2 columns from left.
Could anyone have an idea?
Best regards,
Songul

Hello,
This will be implemented with SPS13.
https://websmp204.sap-ag.de/~sapidb/011000358700004483762006E
And before SPS13, i frame is useful to realize what you want to do. Using 2 "Analysis" web item. and display of 1st analysis web item is restricted only thin the header of the table and the 2nd Analysis web item is used as "table". display of this "analysis" is also restricted to 10 - 30 rows.
but this consume hardware resource.
<sample>
           <div style="OVERFLOW: auto; WIDTH: 1000px; HEIGHT: 20px" >
               <bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_2" designwidth="400" designheight="20" >
                   <bi:DATA_PROVIDER_REF value="DP_1" />
                   <bi:NEW_LINES_COUNT value="0" />
                   <bi:NEW_LINES_POSITION value="TOP" />
                   <bi:DATA_ROW_FROM value="1" />
                   <bi:DATA_ROW_TO value="0" />
               </bi:ANALYSIS_ITEM>
           </div>
           <div style="OVERFLOW: auto; WIDTH: 1000px; HEIGHT: 200px" >
               <bi:ANALYSIS_ITEM name="ANALYSIS_ITEM_1" designwidth="400" designheight="200" >
                   <bi:DATA_PROVIDER_REF value="DP_1" />
                   <bi:DATA_COLUMN_FROM value="1" />
                   <bi:DATA_ROW_TO value="0" />
               </bi:ANALYSIS_ITEM>
           </div>
Kind regards,
Masaaki

Report Designer - Layout height and width

Hi Experts,
Is there an option to adjust the report designer layout height and width? I am able to adjust the individual row and column height. I have a report designed in report designer which will have only 5 rows. when I execute this web template the report item is displayed in one entire page instead of only 5 rows.
How can I control/adjust the page size in report designer? Is this possible?
Thanks,
Gnana

Gnana,
are you starting the report from the portal directly, or do you have it embedded into a web template? As the Report is a web item, you can set the size of the item.
At first I was considering posting the reports directly to the portal, but there are some things that I don't like with how it handles them - for example if you have a report based on the query view, when you post it directly to the portal it will execute it with the saved variable values before you can change them. Thus, I have to put it into a web template and set to prompt for variables at the beginning.
Thanks

Inserting total column and row

Hello All,
I'm new to WebI and BOBJ and I'm having some issue with my first report. I've tried searching the forum for this same issue (or something similar) and came across nothing. Any help is greatly appreciated!
I'm having a problem inserting a Grand Total column and row to my report. Here's a sample layout of my report:
*Tech Type | Project | Role | Key Fig1 | Key Fig 2 | Key Fig 3 | Key Fig 4|*
Proj 1
Subtot
Proj 2
Subtot
etc
In one tab the key figures are grouped by month and I also created four tabs (one tab for each key figure) that lists the key figures by month.
What I wish to do is insert one row at the end of the report which sums the key figures vertically and a column that adds the key figures horizontally. I've tried to do SUM but that inserts a row/column after every key fig. I've also tried to do a count and insert a SUM formula with the same effect (a row/column is inserted after every key figure).
Any suggestions?
Thanks,
Joaquim M.

Joaquim,
Through your posting it's hard to visualize what is happening, other than you are not satisfied with the results. Here are the steps for adding a sum to a horizontal grid with perhaps two columns of information (month, figures). After the grid is presented, left-click once on the data of figures (do not click on the header cell of figures, click on any cell just below the header). Once you left-click the column will appear with a "grey" highligting. Next is to click on the "sigma" icon drop-down and choose "Sum". Once you click sum a new row at the very bottom of your grid should appear, summarizing [figures].
Thanks,
John

Avoiding zeros in columns and rows after selecting parameters

Hi,
I have a parameter on my report, after selecting certain value it shows me Zero Zero for all the columns and rows that do not satisfy the parameter selected and shows data in rows nad columns whre it is matching.
Is there any way to just avaid getting anything for the rows and columns that are not matching and just getting data rows and columns......like a compact form.
I hope I was able to explain my question.
Robinn

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Switch columns and rows in SSRS

Hi,
I have a report with static columns that looks something like this:
Date
Column 1
Column2
Column30
December 1
   xxx
    xxx
    xxx
December 2
xxx
  xxx
    xxx
December 31
xxx
    xxx
  xxx
It is based on SP that produces a temporary table exactly the same way as the report output (my Dec
1 to 31 rows are details that are precalculated within SP).
I need to switch columns and rows as my report is getting too wide.
Does anyone know how it is done in SSRS 2005 (with SQL 2005 data source) without re-writing my SP?
Thank you in advance!

Thank you for your reply Jason.
Unfortunately I do not have tablix within SSRS 2005; I only have matrix and table. For the original report I am using table as it displays data exactly the way it
is passed from the SP. You cannot switch columns and rows within the table. I tried matrix, but it didn’t work either… Is there any work around that you know of?
Thanks again!
Lana

Transpose columns and rows in numbers

I need to transpose columns and rows in Numbers and I do not want to write script to do it. Is there an easier way?

Give me a proper transpose and I will uninstall Excel and never look back.
Ok, here's a proper transpose, that can be placed in an Automator Service so it becomes a simple menu pick as below (and can also be assigned a keyboard shortcut).
To use it (this is slightly different from Excel) you select the range you want to transpose, choose Copy Transpose, click a destination cell in an existing table in the current document or another document, and command-v (Edit > Paste) or option-shift-command-v (Edit > Paste and Match Style).
The one-time setup is as follows. In Automator choose File > New > Service, drag a Run AppleScript action from the left into the right pane, choose 'No Input' for 'Services receives selected' and 'Numbers' for 'in'. Then paste the following into the Run AppleScript action, replacing all text already there by default:
--Transpose - select range, run, paste transposed values where wanted
try
          tell application "Numbers" to tell front document to tell active sheet
                    set selected_table to first table whose class of selection range is range
                    tell selected_table
                              set my_selection to the selection range
                              set first_col to address of first column of my_selection
                              set last_col to address of last column of my_selection
                              set first_row to address of first row of my_selection
                              set last_row to address of last row of my_selection
                              set str to ""
                              repeat with i from first_col to last_col
                                        repeat with j from first_row to last_row
                                                  set str to str & (value of cell j of column i of selected_table) & tab
                                        end repeat
                                        set str to str & return -- add line return after row
                              end repeat
                    end tell
          end tell
set the clipboard to str
          display notification "Ready to paste transposed values" with title "Numbers"
on error
          display dialog "Select a range first and then try again"
end try
--end script
Hit the compile "hammer" and the script should indent properly. Then save the service with the name you want to appear in your menu, and it will thereafter be available via the Services menu (and keyboard shortcut, if you set one up in System Preferences > Keyboard > Shortcuts > Services).
That's it. Less then five minutes' one-time set-up work and you've got a menu pick for a transpose functionality that is as convenient as Excel's.
SG

Invert Axis in a Chart with Report designer

Hi Gurus
Do you know the proccess or option to change (invert) the axis in a chart with Report Designer or in a table with Query Designer?
Regards
Jose

Hi Jose,
I guess this will help you...
Check here.....
Rotating Charts
Use
You can change the angle of the first segment of a pie chart, doughnut, polar chart, radar chart or split pie chart, thus rotating the chart clockwise.
Procedure
1. Select the property ® Starting angle.
2. Enter the number of degrees by which you want to rotate the circle or rings clockwise.
The first category at the top of the diagram begins with zero degrees, and the one at the bottom begins with 180 degrees.
Regards,
Vijay.

Numbers-freezing columns and rows

Can you freeze columns and rows in numbers although they are not designated as headers?

FYI   I was looking for information in these old posts on the Freeze function in Numbers.
After looking through numerous posts and finally talking with an Apple Tech, we found that the freeze function was not in Number 08, but added in Number 09.   We were both surprised that this basic spreadsheet function was missing from 08
With this function you can lock/freeze the top row and/or column so as you scroll through the spreadsheet, you can see you first rows or columns while looking at the data in the middle of the spreadsheet.
I am not an Apple representative, but the only way to fix this and other flaws in Number 08 is to upgrade to 09 for $19.99.   Hope this helps.

How to enter a data into the specified column and row in a created table

Hi,
I want to enter some data to specified column and row in a already created table. Please let me know how to do this.
Regards
Shivakumar Singh

A table is just a 2D array of strings. Keep it in a shift register and use "replace array element" to modify the desired entry programmatically.
If you want to modify it manually and directly from the front panel, make it into a control and type directly into the desired element. (In this case your program would need to write to it using a local variable).
Atttached is a simple example in LabVIEW 7.0 that shows both possibilities.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ChangeTableEntries.vi ‏41 KB

How to get the current selected column and row

Hi,
A difficult one, how do i know which column (and row would also be nice) of a JTable is selected?
e.g.
I have a JButton which is called "Edit" when i select a cell in the JTable and click the button "Edit" a new window must be visible as a form where the user can edit the a part of a row.
Then the column which was selected in the JTable must be given (so i need to know current column) and then i want the TextField (the one needed to be edited) be active with requestFocus(). So it would be
pricetextfield.requestFocus();
Problem now is that i have to click every time in the window the JTextField which was selected in the JTable. I have chosen for this way of editing because my application is multi-user and it would be too difficult for me when everybody did editing directly (catch signals, reload data, etc.).
My question is how do I know the current column and the current row in a JTable?

I'm not sure what your mean by the "current" row or column, but the following utility methods return
which row and column have focus within the JTable.
public static int getFocusRow(JTable table) {
return table.getSelectionModel().getLeadSelectionIndex();
public static int getFocusColumn(JTable table) {
return table.getColumnModel().getSelectionModel().getLeadSelectionIndex();
}

Read words from text file by delimiter as columns and rows

Hi All,
I need your help as i have a problem with reading string by delimiter. i have used various tech in java, but i can not get the result as expected.
Please help me to get the string from text file and write into excel . i have used a text file.
problem
get the below as string by delimiter
OI.ID||'|'||OI.IDSIEBEL||'|'||OI.IDTGU||'|'||OI.WORKTYPE||'|'||OI.UTR_FK
read the below as string by delimiter
"50381|TEST_7.15.2.2|09913043548|Attivazione|07-SEP-10
now i need to write the above into excel file as columns and rows.
there are 5 columns and each corresponding values
the outut excel should be
OI.ID OI.IDSIEBEL OI.IDSIEBEL OI.WORKTYPE OI.UTR_FK
50381 TEST_7.15.2.2 09913043548 Attivazione 07-SEP-10
i tried in diffrerent techinq but not able to get the resule. pls help me
Thanks,
Jasmin
Edited by: user13836688 on Jan 22, 2011 8:13 PM

First of all, when posting code, put it between two tags.
Second of all, the pipe is a special character in regex, so you need to escape it as
.split("\ \|");
Erh. So 2 backslashes before the pipe character. Stupid forum won't post it.
Edited by: Kayaman on Jan 24, 2011 9:35 AM
Edited by: Kayaman on Jan 24, 2011 9:35 AM
Edited by: Kayaman on Jan 24, 2011 9:36 AM

Charts in Report Designer - choosing columns and rows for categories

Similar Messages

Maybe you are looking for