Charts not appearing properly after upgrade
I have just upgraded from 10g to 11g, i see that all my charts are not displayed as they are in 10g. Like legend names are not appearing, for some charts the whole view is gone, for line bar graps bars are gone like this there are lots of issues in almost all the charts.
What could be the issue, do i have to manually go and correct all of them?
Any help would be apprecialted
Thanks
Ronny
Ronny,
Yes, post upgrade you might see lot of changes in charts. Some of them are listed here,
http://docs.oracle.com/cd/E21043_01/bi.1111/e10544/creatingviews.htm#CHDFJEHA
Regards,
Dpka
Similar Messages
-
Wifi is not working properly after upgrading 7.1.1 onmy i4s
Dear Apple
i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
its my humble request please find a solution and provide me as soon as possble..
my totally work on wifi .
and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
Thanx & Regards
Sam
+91-92555-04628settings - general - reset - reset network settings.
-
Images,css not appearing properly after accessing the reverse proxy page.
Usecase :
1) OHS1 with mod_osso agent deployed.
2) OHS1 configured as reverse proxy.It points to the webserver(OHS2) of the app1.
OHS1(mod_osso agent installed)-->OHS2(app1 webserver)
3) httpd.conf entry in OHS1:
ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
ProxyPass /test/ http://tkcltkcl.padma.xxx.com:8088/test/
ProxyPassReverse /test/ http://tkcltkcl.padma.xxx.com:8088/test/
4) The direct url for appl1 works as per expectation. The reverse proxy redirects from the OHS1 correctly to the app1 OHS webserver accessing the app1 url.But the contents in the redirected app1 url are not aligned properly.Images,css,placement of html links are not appearing properly on the page.
Do we need to do any other configuration in the revere proxy setup so as to avoid the misalignment on the redirected page?
Thanks.Hi:
Thanks for the reply! I have been UTTERLY scrupulous about
keeping precisely time-matched and points-in-my-process-matched
copies of the project folder for logical, "scientific" testing in
RH5 and RH7, on precisely matched content.
I have never even tried to open an RH7-processed copy of the
project in RH5 because I was warned strongly against this action.
It boils down to this; I cleaned up, FANATICALLY, all those
illegitmate filenames, ran the project again in 5, still got
impermissible missing images (and I mean MORALLY impermissible,
because I'm doing the right thing!)
Then, I took that project folder, copied it, and opened the
exact same ingredients, via the .xpj file, in RH7. Same missing
images.
WAIT! Left out something important in first post! Dang; this
was important! I've fixed missing images, had them appear properly
upon compilation, then had others that HAD been right, come out
missing. Have also had reimported, re-placed images come out upon
compilation following repair, and then go missing again on third or
later, subsequent compilations. Maddening.
Am EXTREMELY reluctant to delete CPD file, because the last
time I did that, I lost EXTENSIVE work I'd done on TOC and Index.
Not cool at all.
Hope this wasn't too cranky; truly grateful for help. Just
very frustrated.
Thanks! -
USB 2.0 not functioning properly after upgrading to 3.10.3-1 kernel
After upgrading to the 3.10.3-1 kernel USB 2.0 is not working anymore on my ASrock ION330 nettop.
I just did a system upgrade (including a kernel upgrade to 3.10.5-1), but the problem remains...
Here's the relevant messages that I extracted with journalctl -b
Aug 07 09:59:11 alcyone kernel: ACPI: bus type USB registered
Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver usbfs
Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver hub
Aug 07 09:59:11 alcyone kernel: usbcore: registered new device driver usb
Aug 07 09:59:11 alcyone kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 07 09:59:11 alcyone kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 07 09:59:11 alcyone kernel: ehci-pci: EHCI PCI platform driver
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: setting latency timer to 64
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: OHCI Host Controller
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: setting latency timer to 64
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: EHCI Host Controller
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: debug port 1
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: cache line size of 64 is not supported
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: irq 18, io mem 0xfae7ec00
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 3 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 4 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 5 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 5, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 6 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 6, error -71
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 7 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 8 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 9 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 9, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 10 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 10, error -71
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 3
Aug 07 09:59:11 alcyone kernel: usb 2-5: new high-speed USB device number 12 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 13 using ehci-pci
Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 14 using ehci-pci
Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 14, error -71
Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 15, error -71
Aug 07 09:59:13 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 5
Aug 07 09:59:13 alcyone systemd[1]: Found device MCP79 Ethernet.
Aug 07 09:59:14 alcyone kernel: usb 1-1: new low-speed USB device number 2 using ohci_hcd
Aug 07 09:59:14 alcyone kernel: usb 1-4: new low-speed USB device number 3 using ohci_hcd
I'm glad that keyboard and mouse are working properly under USB 1.0, but neither my usb-parport printer nor my USB external hard drive are recognised any more :-(
Any ideas how to solve this?? (I'd prefer not to downgrade the kernel)
Last edited by zilverling (2013-08-07 14:28:36)I've discovered it's not that USB 2.0 is not working. 3 out of 6 usb ports/busses seem to work properly. The other three seem totally dead. Obviously this was not the case under kernel 3.9.9-1. Downgrading to kernel 3.10.2 made no difference.
In practical terms this means that I can use my printer and access my external drive if I use the right port/bus. And I could probably work around the problem by plugging a USB hub in one of the working ports. But I would be happy to get rid of the error messages and have all 6 usb busses working as they did before... -
2008 Macbook pro left click not working properly after upgrading to 10.6.8
I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything. I have tried plugging in a mouse, but when I do so the mouse also behaves the same way. The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
I tried deleting com.apple.driver.AppleBluetoothMultitouchTrackpad.plist and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?I started having the same issue after update. I'm on a MacBookpro running 10.7.2
ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working. Two days later problem was back. I then did a reboot and the computer was back to working. Today the computer worked fine tell it went to sleep. I had to do a hard reboot to get the Mac up and running and now no left click. Please help. I can not use the Mac with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working. One other item when you go to pick your user at startup the left mouse click works. Help! -
Mail not working properly after upgrade to Leopard
Hopefully this will be a common issue easily solved!
After updating from 10.3.9 to Leopard 10.5.6 Mail has become unresponsive after opening - the programme opens but the message window does not appear, the address viewer and connection activity monitor will appear, it does not receive mail either
If anyone has any ideas would be much appreciated!
TIAThe problem you are having following the upgrade to Leopard (10.5.6) from 10.3.9 is similar to those of people who have upgraded from Tiger, and has been covered by the support document at the link below:
http://support.apple.com/kb/TS2537
Your issue will be due to files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those. You will not have the files named to include MessageRules because you have not used Tiger.
To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
Ernie -
Plug and play speakers not working properly after upgrading to Windows 8.1
After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.
@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
Hi, has anyone experienced issues with there volume control icon randomly popping up after upgrading to ios 6.1 from 6.0 .
I have a 4th gen ipod touch which until upgrading to 6.1 from 6.0 was working perfectly.
Minutes after the upgrade I noticed the volume icon just popping up for no reason. I can turn the volume up now, but not down and it randomly appears on screen without anyone touching it. Weird! Can someone shed some light on this issue,I have reset and reloaded to factory several times now to no avail.
thanks!I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back.
-
Pictures not appearing in after upgrade to SRM-MDM Catalog 3.0 SP7 Patch4
Hello,
Due to some issues in Advanced search we performed the service pack upgrade from SRM-MDM Catalog 3.0 SP5 (with MDM 7.1.03.72) to SRM-MDM Catalog 3.0 SP7 Patch4 ( MDM 7.1.04.146). With this new SP, the Pictures are not appearing anymore under the Hyperlink section anwhere in Catalog browser( Compare, Context view, Item details). With earlier SP pictures were appearing perfectly.
We have done like this:( refer earlier thread - Re: SRM MDM Catalog 3.0 Image display) thanks Sudhanshu, Jitesh and Mandeep for suggesting that solution!
Using the hyperlink field
type : rendered
MIME type : image type i.e. .jpg
URL : web URL
We had gone for this option because we dont want to store impages in MDM, and this worked perfoectly until new SP upgrade.
Any clues?
Thanks
PravinHi Bala,
Nothing appears under the Hyperlink section in Catalog browser, though a valid link exists in Data Manager under Hyperlink as type-Rendered, MIME type as JPG and a valid URL.
I have searched Service Market place for this fix of this issue and found that SAP has improved the technology ( from Object Cache to Blob Cache) to display pictures/hyperlinks from SRM-MDM Catalog 3.0 SP06 and MDM 7.1SP04 onwards. We were on SRM-MDM Catalog 3.0 SP05 and MDM 7.1 SP03 before Dev upgrade.
Here are the notes for reference of others who get into same issue.
Note 1450593 - Implementation of BlobCache
This note states "MDM7.1 SP04 offers new image caching functionality called Blob Cache. The old functionality of Object Cache is replaced with the Blocb Cache mechanism in Catalog 3.0 SP06 P1"
Note 1505796 - Images not showing in SRM-MDM catalog (error in BlobCache)
This note talks about the issue in MDM API with Blob Cache. The Fix has been provided in SRM-MDM Catalog SP08 Patch 01.
But upgrade is not something that happens on the drop of a hat, we dont want to do another upgrade, I would like to know if there is a workaround.
Thanks
Pravin -
Display as Key and Name Not working properly after upgrade to Bi7.0
Hi Bw Guru's
Recently we have upgrade our BW 3.5 system to BI 7.0 (Only system upgrade not applications ).
after the upgrade we are facing lot of issues with Bex Analyzer. The following are some of the issues
1) In BW3.5 after the execution of Workbook or query ,we can convert to local currency .
Right click on workbook -> Currency translation-> Database currency .
but after upgrade to BI7.0 this is not working ..
2) Characterstic Right click on workbook Dispaly as Key and Name is also not working ..
I know that Currency translation in BI7.0 works in different way compare to BW3.5 .we can use alternate option like By Target Currency from Database currency to convert to local currency and it is working fine in Bex,but businesss users want more friendly way ...because to select the above option they have to enter local currency and rate type ...
Do you we have any notes available for the above solutions ..?Do we need to upgrade Bex version also..?Is there any document which describe how the above things works after system upgraded to BI7.0?
Please suggest me..
Thanks in advance
Shu Moh.Dear Harita
The first issue Currency translation in query or workbook is solved with SAP note 1119549.For second issue we have not found solution until now ,Once we find the solution we will update you..
Shu Moh -
Organize by conversation is not working properly after upgrade to Lion
After upgrading from 10.6 to 10.7 I've figured out that Mail Application is not very accurate with organizing by conversation. Mail from Snow Leopard was pretty nice. But after upgrade it started to make several conversation. This is very annoying especially when I'm working with support tickets.
Here is one of the example:
Mail 10.7 ( Lion )
[xxx.com #14531] Company Ecuador: training/refresh
[xxx.com #14531] Company Ecuador: training/refresh
RE: [xxx.com #14531] Company Ecuador: training/refresh
RE: [xxx.com #14531] Company Ecuador: training/refresh
[xxx.com #14531] Company Ecuador: training/refresh
[xxx.com #14531] Company Ecuador: training/refresh
Mail 10.6 ( Snow Leopard )
[xxx.com #14531] Company Ecuador: training/refresh
[xxx.com #14531] Company Ecuador: training/refresh
RE: [xxx.com #14531] Company Ecuador: training/refresh
RE: [xxx.com #14531] Company Ecuador: training/refresh
[xxx.com #14531] Company Ecuador: training/refresh
[xxx.com #14531] Company Ecuador: training/refresh
I also tried Mozilla Thunderbird. It is organizing by thread very accurate.
Is there any way how to configure this in Mail? May be I'm doing something wrong?
I like all new features of new Mail programm, but it wi very annoying.
Thanks,
Shony.Hi Sundar & Rakesh
I've followed Sundar's request in the previous thread we worked on together to provide further assistance here:
** Scenario Summary **
The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window. This was working fine before upgrade to SAP NW 7.4 SP 5.
Ok the first point of reference and analysis here is to check and review: Workprotect mode via the following navigation path:
System Admin-> System Configuration -> Service Configuration -> Under one of the services: Work protect mode property.
Now in terms of this popup kindly ensure the configurations are setup accordingly as per the following document:
http://scn.sap.com/docs/DOC-2513
What is the setting of WDPortalWorkProtectMode.setApplicationDirty ?
Work Protect Mode
http://help.sap.com/saphelp_nw04s/helpdata/en/45/b76f4169e25858e10000000a1550b0/content.htm
Lastly have you attempted to change the property value and restarting the service ?
Restart the config by right clicking on com.sap.portal.epcf.loader. Click Administrate ->restart
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer. -
App Store not working properly after upgrading to Yosemite
After upgrading from Mavericks to Yosemite. I checked the App Store's icon to see that I have 6 updates. I launched the App Store and this was my window:
This is my Purchases tab (although I am signed in):
And this is my Updates tab (Although it says 6 updates. They should be iWork and the other new Yosemite updates.):
When I click on Store -> "View my account", it keeps on asking me to sign in forever.
Also when I click on "iCloud" in preferences, I get this error which I think is related:
I tried restarting my mac several times. I tried quitting the storeagent from the Activity Log. But it's still the same.I am having the same problem since downloading ios6
Almost wish I hadn't
Can't get YouTube as apple removed it
When I go to apps it keeps giving me a blank page too
I type in YouTube and it goes to page with cancel far left. iPad iPhone app in middle and search box for YouTube far right
But it just goes back to beginning when I cancel
Is it corrupted..will apple sort this ASAP
It's not only you tube I want...
Help apple! Or anyone -
HT1414 Linksys webcam does not view properly after upgrading to ios6
I upgraded my iPad 2 and iPhone 4 to the new ios 6. Now when I go to view my linksys web cams they do not view properly. I see the camera view for a few second, but then it goes blank. I have another iPad 2 which I did not upgrade and am still able to view with the old iOS. Seems like the new iOS 6 did something, but not sure why it will not work with the new iOS.
I access the site through the web browser.Same problem. I two nights ago I upgraded to IOS6 on my iPad2 and can no longer call up my LinkSys cams in Safari. My iPod Touch 4 is still on IOS5 and no problem viewing cams in Safari.
I am still in Lion on my iMac but last month upgraded to Safari 6. I then lost the ability to view my cams in Safari. I went back to Safari 5.1.7 and then no more problems.
Obviously this is a Safari error. Until this is fixed, I will not upgrade to Mountain Lion.
I spoke to Apple last night and the tech said he will contact engineering. He took detailed notes so let's hope for the best.
If you need to view your cams on your devices, investigate iCam by SKJM or LiveCams Pro by Eggman Technologies. Both apps do way more than just viewing your cams. I have been using iCam for about a year for security reasons. Your cams can be set up to record on motion where images will be stored on your devices AND Dropbox.
iCam, however, is slightly difficult to set up (and sometimes maddening) but lots of info on their site as well as direct response to any problem by email. Some idiosyncrasies but hey it's only $5 and does provide security when you leave your home. Not to mention all your cams on one page if all you want to do is look at them. -
ESS is not working properly after upgrade from 4.7 to ECC6.0
ESS Scenario in 4.7
4.7 Scenario:
The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
List of Services used to set up ESS:
Sl.No Functionality Service/EWT/URL Name Standard/ Customized Type
1 Home Page PZM3 Standard Service
2 Inbox BWSP Standard Service
3 Calendar BWCA Standard Service
4 Whou2019s Who PZ01 Standard Service
5 CPF Display http://192.168.0.2:7070/omcpf NA URL
6 Payslip Display ZPAYSLIP_USER Customized Service
7 Section 80C PZ88 Standard EWT
8 Section 80 PZ80 Standard EWT
9 Form 16 HRESSIN_F16 Standard EWT
10 Address PZ02 Standard EWT
11 Bank Information PZ03 Standard Service
12 Open Appraisals Not Available NA Service
13 Emergency Address PZ05 Standard EWT
14 Family/Dependents PZ12 Standard EWT
15 Personal Data PZ13 Standard EWT
16 Previous Employers PZ28 Standard EWT
17 Apply Leave WS20000081 Standard Service
18 Leave Overview WS01000109 Standard Service
19 Leave Balance PZ09 Standard Service
20 Loan Application ZLOAN Customized Service
ECC6.0 Scenario:
In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
List of Services would be used to set up ESS:
Sl.No Functionality Service/EWT/URL Name Standard/ Customized Type
1 Home Page PZM3 Standard service
1)this service is not available
2)SAP does not provide any replacement.
3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
4)Given reference of few notes.
5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified to access the services via URL or by OKCODE.
Screenshot attached below.
2 Whou2019s Who PZ01 Standard Service
1)this service Available
2)Not Working properly.
3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
7 Section 80C PZ88 Standard EWT Available
8 Section 80 PZ80 Standard EWT Available
9 Form 16 HRESSIN_F16 Standard EWT Available
10 Address PZ02 Standard EWT Available Only EWT Available. Service needs to be created to access the EWT.
11 Bank Information PZ03 Standard Service Available EWT Available. Service needs to be created to access the EWT.
12 Open Appraisals Not Available NA Service EWT Available. Service needs to be created to access the EWT.
13 Emergency Address PZ05 Standard EWT Available EWT Available. Service needs to be created to access the EWT.
14 Family/Dependents PZ12 Standard EWT EWT Available. Service needs to be created to access the EWT.
15 Personal Data PZ13 Standard EWT EWT Available. Service needs to be created to access the EWT.
16 Previous Employers PZ28 Standard EWT Service Available
17 Apply Leave WS20000081 Standard Service Available, but not working No solution is proposed yet.
18 Leave Overview WS01000109 Standard Service Available, but not working No solution is proposed yet.
19 Leave Balance PZ09 Standard Service Available, but not working No solution is proposed yet.Ya ramakrishna,
Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
Please do the needfull,
Julius -
Camera lock screen iPhone 5 not working properly after upgrade to iOS 8
After I installed iOS 8 on the iPhones 5 of my and my wife's the camera on the lock screen isn't working properly anymore. When I swipe up, the camera starts but the screen turns black within less then a second.
On the iPad 2 and the iPad Air (both upgraded to iOS 8) I don't have this problem. It seems to be iPhone 5 specific.
Has anyone else experienced this problem?Having the same problem. I'm on an iPhone 5 and I have updated to 8.0.2. When I go to apps directly from the lock screen (timer, calculator, camera) it opens up then immediately turns into a black screen. It appears that removing my passcode fixes this bug, but I can't have an unsecured phone. Please help Apple!
Maybe you are looking for
-
Photo Page, Add albums, creates new "Album Pages", style?
Working with iWeb09, I created a single photo gallery page, then I drop in an album from iPhoto, looks and works great. I edit the resulting page and it looks great, but when I add another iPhoto album, it creates a new photo page automatically. How
-
Create long text for network activity
Hello, I'll create a long text for a network activity, but I found no BAPI for that. When I create long text for an order activity I use the BAPI BAPI_ALM_ORDER_MAINTAIN. There it is possible to specifiy the long text lines. In the BAPI BAPI_NETWORK_
-
Variable to be declared when calculating ratio.
Hi ABAP Experts, I need to calculate ratio of the following: Lv_Ratio = lv_var1 / lv_var2. Note: TYPE of lv_var1 and lv_var2 = Currency, Length 13, Dec 2. I would like to know, what 'TYPE' should the variable lv_ratio be declared? Thanks a lot in ad
-
Essbase Studio Migration 11.1.3
I am trying to migrate existing EIS catalog to Essbase studio 11.1.3. Its wired that Essbase studio is only recongnizing User DSN when compared to System DSN for EIS Catalog DSN Essbase/EIS/Essbase Studio are installed on the same box. Using SQl Nati
-
Upgrade from CS3 Win to CS5 Mac is possible?
Quite a simple question: Is it possible to make upgrade from CS3 Win to CS5 Mac? If "yes", which are the steps I'll have to follow? I would like to mention that I'll buy the upgrade software in Romania, so I'll have to deal with a Romanian Adobe soft