Chase Southwest and Citi Double Cash!

Two new cards in my wallet! Last Friday received an offer in the mail for Citi double cash. I responded to the offer and instantly approved with a credit limit of 1,500$.Yesterday i got an email offer for Chase Southwest. Since I'm almost always flying with Southwest and it was offering 50,000points as  a bonus after spending 2,000 in the first 3 months, I decided to apply! After applying a message appeared saying to call as soon as possible at 877-260-0087 etc. I called today morning and after verifying some info got approved for 2,500$!!! In terms of pulls, Chase pulled only EX and Citi both EX and EQ.  I now have 9 credit cards (5 new cards since June 2015: amex ED, amex bce, freedom, citi and southwest)and a total of 27,000$ in credit with a credit history of only 9 months! Annual salary around 55,000$.    EX fico: 660, 12 inquiries. TU fico 678. EQ i do not know but suppose it is higher than the rest cause i only have 5 inquiries there. Credit utilization: 26%Cards: bofa cash rewards sign visa 8,000$, chase freedom 3,500$, discover it 2,500$, cap 1 platinum 2,000$, cap 1 journey 1,500$, amex ED 4,500$, amex bce 1,000$, citi dc 1,500$ and chase southwest 2,500$. 

Congratulations! Chase pulled both EX and EQ for both my Marriott and Hyatt cards earlier this year.Citi pulled both EX and EQ for the AAdvantage card I was just approved for.Oh well, they age off soon enough.

Similar Messages

  • Citi Double Cash Decline

    I was pre-approved for the Citi Double Cash and since I just got the Lowes card I decided to apply. I was rejected because the system saw too many INQs on EX this year and too many new cards open. I spoke to a very nice supervisor in their call center and she said the buck stops there. Nobody can recon and she said I can write a letter to the company. I called 800-347-4934. My FICO 8 scores are in my sig. I have a 1% UTIL and PIF all cards each month. The bottom line was only the new cards and the HP. I told her how I check it faithfully and pointed out there was no HP since April. The answer was no human will reconsider their internal models. Any comments or helpful hints? I'm really disappointed that the HP was wasted.

    Sandibeach22 wrote:
    Vulcan1600 wrote:
    Sandibeach22 wrote:
    They'll pull EQ sometimes.  So the answer was absolutely, positively no way. She kept pointing to the number of new cards since 2015 and the inquiries. She actually said there were several inquiries in 2014, and I pointed out and she agreed, those were when I was getting a loan for my truck and not CCs. I didn't apply for any credit cards for 20 years prior to 2015. I actually searched on here in the archives and felt confident based on others who had apped for this card that I wouldn't have a problem. So, Citi doesn't care about my 1% UTIL, PIF each month and keep track of my score and inquiries. I named each EQ inquiry for 2015, the card and the date pulled, then told her my FICO 8 score for EQ is 798 just so she knows I'm keeping close tabs on my credit. Not good enough. Not the end of the world, I'm more than satisfied with what I've got, but really liked the 2% cashback. Discover with the double cash for the next 12 months and QS 1.5% will be my go to cards for larger purchases.  The main reason I did this app was that I was in the garden for 2 months, my wife and I had a reason to app for the Lowes card, which I was approved for a $10k limit, so figured before going back in the garden, get the Citi Double Cash with the pre-approval on their website. They're about as tough as FNBO for a stupid Sheetz gas card back in April that I got turned down for. This is my 2nd rejection ever for CC in my life.   Back to the garden again I go.....Sorry to hear.  It really seems hard to beleive with your scores.  I bought a car last year and moto for hubby,  Makes you wonder what's programmed in the machine along with the CSR's.  I would try again later. Time is the magic word.  You didn't do anything wrong.  I hope to be at your scores in another 6-12 months.  I'm still shaking my head on this one! Don't think I'll app for Sallie Mae. I really don't want to go thru the same recon mess I just went through tonight again for a while. Thanks for the kiind words. You'll achieve the higher scores in the next year I'm sure. I'm pretty sure my EQ will take a drop for this, however a $4k CLI is going to report in a few days from AMEX BCE. Maybe that will offset it.

  • SP Citi Double Cash CLI!

    Just went online and figured I would try for a CLI from Citi, as I've recently gotten CLIs from both Amex and Discover, and I'm glad to report it was a success!!!  Instantly approved for double my previous limit, $1,500 --> $3,000 That brings me toAmex: $6,000Barclays: $750Citi: $3,000Discover: $1,500Total Credit: $11,250 Really way more than I need, haha

    panhead1406 wrote:
    Just went online and figured I would try for a CLI from Citi, as I've recently gotten CLIs from both Amex and Discover, and I'm glad to report it was a success!!!  Instantly approved for double my previous limit, $1,500 --> $3,000 That brings me toAmex: $6,000Barclays: $750Citi: $3,000Discover: $1,500Total Credit: $11,250 Really way more than I need, hahaCongrats. How long have you had your Double cash. and you are sure it is sp? is there a special screen to let you know it would not be HP. I got Hp last week and denied for too many recent inquries.

  • Trying to decide if I should apply for the Citi Double Cash

    I have a ton of inquiries.  Wanting to garden, but I want to try.  Just approved for a Venture for $5k a few days ago.  CLI with Citi AAdvantage yesterday.  Denied for both Delta Exp and Amex.  Denied for even a Macys CLI even though that's just a soft pull.  I think the Delta wasn't even a pull because when I went to check on the status, it was "canceled" instead of denied - may have been because I applied for the Amex the day prior. Really wanting that Citi Double.  I know, I'm an addict now.

    Citi likes to pull EQ and EX, which are your lowest scores respectively.  That, coupled with your INQ's, probably won't bode well for your recon. I wouldn't apply for DC again until you see that you're prequalified online for it (where you are given a specific APR range).  Cold apping for it is risky, especially if you have a lot of INQ's.  The DC is probably Citi's toughest card to get given its UW requirements.  Sorry to hear about the decline.

  • Discover Double Cash CLI

    I just requested the double cash offer on the last day of my last statement. A few days later, I received an email from Discover saying I was getting a CLI. It was just over a 30% increase. Has anyone else found they were given a CLI after signing up for this promotion? I'm wondering if Discover isn't trying to increase spending power, in hopes that people will end up in debt, having to pay a lot of interest as a result of the promotion. It could potentially be a good way fr them to make their money back and then some. Just thought it was interesting that I rarely get CLIs and I just happen to get my biggest one ever from them right after signing up.

    Kostya1992 wrote:
    Can someone enlighten me here or is this how it works? 1. Discover buys an espensive insurance package2. Discover starts throwing money at people, offering some amazing promotions3. Promotion ends, variable APR kicks in, APR ticks for a few months or years and person defaults on Discover, unable to pay4. Discover files an insurance claim, getting the full apr-inflated balace paid back to them by insurance, having already profitted from swipe fees + previous payments5. Discover sells account to collection agency, making even more $$$$ Am I missing anything?I seriously doubt they could recoup the entire balance from insurance and then sell the debt on assignment; though, I have no idea how these things work behind the scenes. I would assume that once the balane is paid, by whomever, then it can't be collected further.

  • Has the discover double cash back changed your lineup?

    so with the double cash back promo i no longer use my 1.5% cash back NFCU cashRewards because it doesn't reward me as much now. has this new promo made you SD any cards?

    fitchaber10 wrote:
    For me it definitely has not. DC is still better for everyday purchases because you get the second 1% as soon as you pay. You don't have to wait for a year to get it, unlike Discover. To me, the non universal acceptance of Discover means it is only good for the rotating categories and Discover Deals. For everything else, your best bet is to use a different card.Exactly ^^^^^ I don't have Double Cash (BK7 still reporting) but I use Barclays Rewards MC for 2% rewards on gas, groceries & utilities, and Quicksilver 1.5% for most other purchases, I'm not going to wait a year for another 1% from Discover first year double cash back. I use Discover for Discover Dealss or current quarter 5%. I did a nice purchase at HomeDepot.com for 5% through the Discover Deals portal + 5% for current qtr home improvement. Now waiting a year for another 5% or 10% is definately worth the wait.

  • IMac display issues: black icons and folders, doubled up files in finder windows, programs won't update

    HELP!
    I'm hoping someone can help with my iMac 27" purchased in 2010.  From a previous discussion I started a year ago, I have had virtually nothing but trouble with it.  After the internal hard drive crashing, I was able to install OS X on an external drive and used it for a good 8 months to drive my iMac and I took it to an expert who has replaced it with a 3tb HDD, but at some point the display has gone crazy.  I am not certain if it is hardware, i.e. graphics card or video but I'll describe the symptoms and add some pics to see if anyone has seen this before and knows what the problem may be.
    1.     90% of the screen was covered with white with just a portion of the desktop showing through.
            (This happened when I tried to reinstall OS X on the old HDD and the new one, but didn't happen when using OS X install disc)
    2.     Files, folders, photos and some icons on the dock go black
    3.     Files and photos double up when in Finder.  When I'm viewing photos, it shows them but all the previous panes and the photos are jumbled behind the
            photos.
    4.     Anything I open in Preview is completely black, but ColourSync Utility opens everything fine.
    5.     Programs won't update.  They will download onto my iMac but won't update.  Some say, because I don't have OS X 10.6.8 others just won't open.
            Including Google Chrome, opens with two tabs open but when I open a third tab the rainbow wheel just turns.  Skype won't open just gives a failure
            report.
    6.     10.6.8 Update Combo downloads but when I restart the screen is covered in white - as in 1. and I have to reinstall OS X 10.6.2 to get the screen to               clear but then all the above problems continue.
    7.     Sometimes videos don't display in Youtube, or the entire page other than the video player is covered in rainbow lines.
    8.     Some buttons are blacked out on selection pages, i.e. system preferences, or saving screens
    9.     Photos opened in FB go upside down and flicker all over the page as my mouse runs over them.
    10.   Photos won't upload into internet editing programs.
    I can't find anyone who has had the same issue in all of the discussions I've looked at, but it sounds like I have a video problem, but I wondered if it might be a software problem with flash or something.  Or I have something malicious on my computer.
    I also have an iphone 5 that faulted with the iTunes and USB icons and won't fix after trying one of those R-Sims, and I wondered if somewhere along the line it may have even had a virus/trojan/malware that has infected my external drive and then my internal drive.  A reason I have thought that is because I have used my daughter's MacPro laptop and plugged in my external drive and I noticed the windows in hers were starting to do the same thing.
    And on top of all that, my fans didn't work for over a year and I had to place an external fan at the back of the computer or it would overheat and shut down, but after resetting the SMU it started working again, but it is very noisy. I have tried to download SMC Fan Control and although it downloads to the HDD, it won't open.
    Sorry its such a long post, I do hope with all of this information someone can help me.
    Thanks so much.

    HI and Welcome to Apple Discussions...
    *Soon after, I installed Quake Wars, L4D 1, 2, Mass Effect 2, Need For Speed: Undercover, Mozilla Firefox and *Sophos Enterprise AV*. Approximately a week after installation, I began to experience malfunctions varying greatly*
    Macs get grumpy when running anti virus software. Disable or completely uninstall Sophos A/V and see if that makes a difference. A/V software on a Mac will slow the drive down more and more as time goes on.
    Also, check the vendor sites for each 3rd party software you installed to make sure they are compatible with 10.6.x
    The "hard reboots" are a result of the system freezing due to incompatible or outdated software.
    Carolyn
    Message was edited by: Carolyn Samit

  • When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

    When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
    Thank you for any help or suggestions,
    Chris

    I could be corrupted backup.
    You can check the notification settings for message.
    Settings>Notification Center>Messages>Alert Style
    It should be on Banners or Alerts.
    Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
    You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
    Still doesn't work? Settings>General>Reset>Reset all settings

  • List of issues and fixes for procure to pay process and order to cash process for a trading company

    Dear All Gurus
    Kindly tell me where I can find the list of all issues arising in procure to pay process
    and order to cash process and there fixes for a trading company in support project
    Thanking You
    Abdul Baseer

    Hi Abdul,
    There are no standard list to provide, you should identify the issue through regression testing and raise an SR or create a thread accordingly we can help you.
    Note:- Issues are vary to instance to instance, version to version, installation to upgrade etc..

  • Could someone please explain what P to P and Order to Cash cycle?

    Could someone please explain what Procurement to Pay and Order to Cash cycles mean? Thanks.

    Hi,
    Pl.visit following links for P2P cycle.
    http://erpschools.com/articles/procure-to-pay-cycle#13480480234441&79412::resize_frame
    http://oracleapplicationsfunctional.blogspot.in/2011/08/procure-to-pay-p2p-cycle-in-purchasing.html
    http://www.shareoracleapps.com/2010/05/procure-to-pay-cycle-in-oracle-apps-r12.html
    and visit following links for O2C cycle.
    http://erpschools.com/articles/order-to-cash-cycle#13480481951911&21367::resize_frame
    http://www.youtube.com/watch?v=2GhAbWGz7iA
    http://knoworacle.wordpress.com/2008/12/08/data-flow-for-11i-order-to-cash-cycle/
    http://oracleapps88.blogspot.in/2012/08/order-to-cash-cycle.html
    http://www.slideshare.net/anand5538/order-to-cash-cycle-9647606
    HTH
    Sanjay

  • PROCURE TO PAY AND ORDER TO CASH CYCLE

    Can anyone please give me a good material  on " Procure to pay cycle" and " Order to cash cycle".
    Regards
    Amitava

    after sales order we have to do direct billing  ?
    here is a scenario that my client sale a service product out of which he recognise 60% as revenue at the time of sales made and 40% as accrual for next 20 years  even though full payment receive immediately or it may installment with in some 4-5 years
    can any one help how to map this
    Thanks
    Priyaranjan

  • How can I copy a double-sided document and make double-sided copies on an officejet 6830?

    how can I copy a double-sided document and make double-sided copies on an HP officejet 6830?

    Hi,The 6830 only provide double sided printing, it does not offer 2 sided copying, a such can only be done manually. You may find the printer specifications below:Scanning options (ADF): Single-sidedhttp://store.hp.com/UKStore/Merch/Product.aspx?id=E3E02A&opt=A80&sel=DEF#merch-tech-specs Regards,Shlomi

  • How to detect only single click and not double-click mouse events in Swing?

    Hi,
    In my application, I want to implement a functionality only for single click. But problem is on double click, first i can see a single click and then double click.
    i.e e.getCount() return 1 and then 2 for double click. I want to avoid this situation.
    Shouldn't it be just one event with a clickCount of 2? or any alternative solution?
    Please let me know how can i stop this.
    Thanks in advance..
    Cheers
    Somasekhar
    Edited by: SomasekharPatil on Mar 13, 2009 3:36 PM

    Maybe something like the below example:
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.awt.event.MouseAdapter;
    import java.awt.event.MouseEvent;
    import java.awt.event.MouseListener;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.SwingUtilities;
    import javax.swing.Timer;
    public class SingleClickOnly {
        public static void main(String[] args) {
         SwingUtilities.invokeLater(new Runnable() {
             @Override
             public void run() {
              new SingleClickOnly().createGUI();
        public void createGUI() {
         JFrame frame = new JFrame();
         frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         JLabel label = new JLabel("Only acts on a single click");
         label.addMouseListener(createListener());
         frame.add(label);
         frame.pack();
         frame.setLocationRelativeTo(null);
         frame.setVisible(true);
        public MouseListener createListener() {
         return new MouseAdapter() {
             private int clickCount = 0;
             private final Timer timer = new Timer(1000, new ActionListener() {
              @Override
              public void actionPerformed(ActionEvent e) {
                  if (clickCount == 1) {
                   System.out
                        .println("Executing action on click count 1 only");
              timer.setRepeats(false);
             @Override
             public void mouseClicked(MouseEvent event) {
              clickCount = event.getClickCount();
              System.out.println("Clicked: " + clickCount);
              if (clickCount == 1) {
                  if (timer.isRunning()) {
                   timer.stop();
                  timer.start();
    }Piet

  • How to create new country and cities under country?

    hello,
    i am using 11.5.5 apps version,
    want to create new country and cities under that country, please tell me what is the procedure for that.
    i am using demo vis:
    operations as user.
    Thanks
    yash

    Hi,
    Please check below notes which could be helpful for your issue
    How to Add a New Legal Entity, Ledger and Operating Unit for a New Country [ID 1064366.1]
    How To Create New Countries In The Regions And Zones Form [ID 739798.1]
    How To Enter New Countries or Territories Into The FND_TERRITORIES Table? [ID 341032.1]
    How To Add New Legal Entity Registration Code For Countries That Are Not Available In The List? [ID 604280.1]
    Regard
    Helios

  • All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how

    All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how can I stop it? Thanks

    Look under system preferences on the mac at what is be controlled?  Look at Mail, Contacts, Calendars.  How many accounts are managing contacts?  Just the cloud? the cloud and gmail? or cloud, gmail, yahoo, and exchange?  If you have more than one contact account, then you will have different contact lists, if John Smith shows up in more than one of your contact lists, you will have multiple entries.
    Pick a contact list that is your master, (I use iCloud), only turn on contact syncing for it.  The same for your phone.  Spend some time on the iCloud webset (www.icloud.com) and work on your contact list there.  Clean it up, remove duplicates, etc...Changes will auto sync back to all your devices.  Life gets much simplier.
    Just remember, if you sync different contacts lists and a large number of people appear in your different lists, then they will appear as duplicates.

Maybe you are looking for

  • Error during installation of oracle 10g on fedora14

    Hi all, I am trying to install oracle 10g on fedora14. However i am getting the error during installation. Could you people suggest me the root cause...!! Error log: [oracle@test database]$ ./runInstaller Starting Oracle Universal Installer... Checki

  • File not found in \sapmnt\trans\tmp

    Hi All, Some of my transports are failing with return code = 12 with logs similar to the following: 1 ETP199X###################################### 1 ETP162 EXECUTION OF REPORTS AFTER PUT 1 ETP101 transport order     : "<transport request #>" 1 ETP10

  • Using iDrum as a multi-output instrument

    Hi all- Maybe someone else uses iDrum as a drum sequencer/scratch drum instrument like me. I can't seem to instantiate iDrum as a multi output instrument...only stereo. I know how to do this well in PT, but it has eluded me so far in L8. I am: Creati

  • Flash form to email not loading message body

    I'm creating a form in Flash for a client's website to make online reservations. I've been experimenting with asp scripts and found two that work fine, except that the body of the email won't load. The emails come through fine, but blank. Since it's

  • Why can't I display content from more than one domain in my web app?  Is there a workaround?

    I'm trying to display 2 datasources in different views of my web app, an rss from twitter, and an rss from wordpress,  but for some reason dashcode doesn't allow this.  Is there code that can fix this?  A source paramater change code (shown below) is