Chat feature for Microsoft Exchange 2013

Hi Good day,
is there any way to have a simple chat feature service for exchange 2013? im looking for some solutions but only Exchange 2000 has this common feature. I just need to have a simple chat service for our internal and branch offices

Hi,
There is no feature in Exchange server 2013 to meet your requirement. But we can use Microsoft Lync to chat with your domain environment. Microsoft Lync is an enterprise-ready unified communications platform.
By integrating Lync Server and Exchange Server, we can also chat directly in OWA. For more information about it, we can refer to:
http://office.microsoft.com/en-001/lync/lync-server-2013-features-video-conferencing-and-instant-messaging-FX103789592.aspx
If you don’t want to deploy a Lync server in your environment, we can also use
Skype with a Microsoft account or Skype account to chat with others.
Thanks,
Winnie Liang
TechNet Community Support

Similar Messages

  • Exchange 2013 CU3 Fails "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception."

    I can't get Exchange 2013 to install in our Server 2008 R2 infrastructure. Setup fails with the following error when preparing AD. This is running on Server 2008 R2 SP1 VM's.
    Welcome to Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for installation.
    Performing Microsoft Exchange Server Prerequisite Check
        Prerequisite Analysis                                                                            
    COMPLETED
     Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
    t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
    ected.
     Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
    oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
    ffected.
     Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
    e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.
    Configuring Microsoft Exchange Server
        Organization Preparation                                                                         
    FAILED
         The following error was generated when "$error.Clear();
            install-DefaultAcceptedDomain -Name $RoleFullyQualifiedDomainName -DomainName $RoleFullyQualifiedDomainName -Dom
    ainController $RoleDomainController
    " was run: "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.".
     Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
    t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
    ected.
     Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
    oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
    ffected.
     Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
    e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.
    The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the

    I have set the PowerShell Execution Policy to unrestricted. After running setup /PS I get the following output
    PS C:\Windows\system32> cd c:\temp\ex2013cu3
    PS C:\temp\ex2013cu3> ./setup /ps /iacceptexchangeserverlicenseterms
    Welcome to Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for installation.
    Performing Microsoft Exchange Server Prerequisite Check
        Prerequisite Analysis                                                                            
    COMPLETED
     Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
    t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
    ected.
     Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
    oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
    ffected.
     Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
    e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.
    Configuring Microsoft Exchange Server
        Extending Active Directory schema                                                                
    COMPLETED
     Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
    t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
    ected.
     Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
    oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
    ffected.
     Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
    e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.
    The Exchange Server setup operation completed successfully.
    PS C:\temp\ex2013cu3>
    The installation was started at 10:13am and hung for sometime at 94% of the prereq stage. Installation finally completed at 10:47am. The errors seem to indicate that setup will continue. However upon running setup /prepareAD the installation hangs for sometime
    at 21% of Organization Preparation before finally failing with the following output....
    PS C:\temp\ex2013cu3> ./setup /prepareAD /iacceptexchangeserverlicenseterms
    Welcome to Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for installation.
    Performing Microsoft Exchange Server Prerequisite Check
        Prerequisite Analysis                                                                            
    COMPLETED
     Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
    t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
    ected.
     Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
    oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
    ffected.
     Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
    e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.
    Configuring Microsoft Exchange Server
        Organization Preparation                                                                         
    FAILED
         The following error was generated when "$error.Clear();
            install-DefaultAcceptedDomain -Name $RoleFullyQualifiedDomainName -DomainName $RoleFullyQualifiedDomainName -Dom
    ainController $RoleDomainController
    " was run: "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.".
     Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
    t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
    ected.
     Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
    oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
    ffected.
     Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
    e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.
    The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
    <SystemDrive>:\ExchangeSetupLogs folder.
    PS C:\temp\ex2013cu3>

  • 2012 r2 -Microsoft Exchange 2013 DNS timed out

    I just installed Microsoft Exchange 2013 on my 2012 r2 server. I just installed all of the Roles &features, then I went to my fire walls and then I disabled them (temporarily). I configuring my IP addressing, DNS Ip address and a dns suffix. Now I
    can't access my Exchange via browser so I did some trouble shooting and sure enough I can't ping my DNS address. I can ping my IP address though. If anyone has any suggestions that would help then let me know. Thank you for any responses!

    Hi Dallen,
    >>Now I can't access my Exchange via browser so I did some trouble shooting and sure enough I can't ping my DNS address.
    It is not a hyper-v issue , it's more like a network problem .
    First , I would suggest you to disable firewall in DNS server for troubleshotting .
    If firewall is truned off then you still can not ping the DNS server , you may check if the exchange server can ping other IP address in your LAN to check network conectivity .
    If they are in different subnet ,you may try to check the configuration of the router .
    Any further information please feel free to let us know .
    BestRegards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Recieveing "OnUCAppointmentGetVisible" error in Outlook 2013 (64 bit) - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"

    Hi All,
    I originally posted this in the MS Support forums (http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/recieveing-onucappointmentgetvisible-error-in/1a40eca2-8cd1-40f1-a92f-cb08f0af6b72), but was directed over here.
    I have recently upgraded an installation of Office 2010 to 2013 (both 64 bit) but am now receiving an error which says:
    Window Title - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"
    An error occured while calling the callback: "OnUCAppointmentGetVisible"
    This seem to happen when I initially open a calender entry, and when I close the entry (most only the first time I close the entry).
    I did have some developer tools installed for Office 2010 and VS 2010 which played around with Excel,2013 but I have now uninstalled these.
    In addition, BCM 2010 was installed (but for the time being has been uninstalled), but I don't think that is the culprit.
    The issue is being caused be an Outlook add-in. I have three COM add-in enabled, but the one causing the issue in the "Lync Meeting Add-in for Microsoft Office 2013".
    We are currently trialling Lync in a demo installation which is in a different domain to any of the Exchange accounts, but should this cause a problem? For the time being I have disable this add-in.
    Regards,
    Chris
    Chris

    Hi,
    Sorry for my misunderstanding. If the issue is determined to be caused by Lync Meeting Add-in, please remove this add-in from Outlook, then go to Control Panel to repair Office 2013 program. After repairing,
     this add-in would be automatically reinstalled. Please check whether the issue persists. About how to repair Office programs, please refer to:
    http://office.microsoft.com/en-us/outlook-help/repair-office-programs-HA010357402.aspx
    If the Lync Meeting Add-in is not automatically reinstalled, please try to manually add this add-in by the following steps:
    1. Starting Outlook 2013 as an Administrator (right click, run as Admin).
    2. Click File > Options > Add-ins, Manage Com Add-Ins Go... > Add..., C:\Program Files (x86)\Microsoft Office\Office15\UCAddin.dll, OK.
    3. Close Outlook and start it as a normal user.
    Regards,
    Winnie Liang
    TechNet Community Support

  • The Type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule1' threw an exception

    Hello,
    I am getting the error message listed in the topic subject when i try to install the Exchange Server 2013 SP1 Evaluation Mode downloaded from your website. After completing all requirements & pre-requisites, I started the installation with the Mailbox
    & Client Access role selected, when i get to the screen which says "Readiness Check" main page subject, and the progress says Configuring Prerequisites, before any progress in the %, i get the error message:
    The Type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule1' threw an exception
    and it says retry.
    Knowing that the server is a member of a domain.How would i resolve this issue?
    Thanks,
    Elie

    hi Ed,
    i am running Windows Server 2012 R2 Standard Evaluation Edition with Exchange Server 2013 Evaluation, But that error message was resolved by removing and re-installing .NET Framework 3.5. That is fine now.
    But now i am getting another error message When it tries to install the Management Tools.
    (Step 1 of 9: Management Tools)
    Error: The Following error was generated when "$error.Clear();
    Set-LocalPermissions
    "was run: "The process does not possess the 'SeSecurityPrivilege' privilege which is required for this operation"'
    knowing that the server is part of a domain and the domain controller runs Windows Server 2008 R2 Evaluation Edition.
    Any ideas why this error message popups up?
    Regards,

  • Readiness Checks fail with "The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."

    There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
    Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
    The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
    I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
    Is there any known fix for this issue?

    Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
    I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
    apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
    The exact error is...
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of?

  • Is there any Collector for Microsoft Exchange Server 2010?

    Dears All,
    Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
    But our customer exchange version is exchange 2010, Is there any
    Collector for Microsoft Exchange Server 2010? Thanks!
    steve_zeng
    steve_zeng's Profile: https://forums.netiq.com/member.php?userid=3875
    View this thread: https://forums.netiq.com/showthread.php?t=46984

    steve_zeng;226167 Wrote:
    > Dears All,
    >
    > Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
    > But our customer exchange version is exchange 2010, Is there any
    > Collector for Microsoft Exchange Server 2010? Thanks!
    There's a pre-release build of the exchange collector available for
    2010, just contact NTS.
    If you need a full formal release, we're looking to have 2010 and 2013
    support by approximately mid-year.
    brandon.langley
    brandon.langley's Profile: https://forums.netiq.com/member.php?userid=350
    View this thread: https://forums.netiq.com/showthread.php?t=46984

  • Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.

    having problems on new server so I followed instructions to remove Exchange Server 2013 Sp1 using ADSI edit p;er these instructions:
    http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
    now when I re-run setup for exchange 2013 SP1 I get the error :    
    "Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."
    David Sheetz MCP

    contrary to what Ed says you can fix this, it is way harder than it should be and I have NEVER had this many issues on a  fresh build! 
    things to note on Exchange 2013
    1. IPv6 MUST work and also DNS set manually, verify port 25 is open on your firewalls!
    2. even if services are running make sure there are no errors in the application event log and check that all services on the Exchange server are set to ACTIVE. to find out type the below command in exchange management shell
    Get-ServerComponentState –Identity servername
    3. The group "everyone" did not have the right "Access this computer from the network". This could be seen by an audit failure in the security log stating that the user
    "<mailbox server name>" did not have the required login type (login type 3).
    Adding everyone to the "Access this computer from the network" right solved the issue. 
    To enable "Access this computer from the network" :
    Run "gpedit.msc"
    Navigate through
    Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Assignment
    Double click
    on "Access this computer from the network", and ensure "Everyone" is added.
    4. verify all connectors are setup correctly
    Also I found an error in the event log Event
    ID: 1009 once I fixed that emails started to fly!
    To resolve the issue, use one of the following methods.
    Method 1
    Create a new Active Directory group that is named “ContentSubmitters,” and then grant Admistrators and NetworkService full access to the group. This is a dummy group and should be used as a placeholder only. You might want to add a description so that
    the group is not removed.
    Force or wait for Active Directory replication.
    Restart the following services:
    Microsoft Exchange Search
    Microsoft Exchange Search Host Controller
    Method 2
    You can also resolve this problem by removing a configuration entry that refers to the ContentSubmitters group. This entry is present in four files. Each file is calledWcfConfigurator.xml,
    and you can find each file in the following folder:
    %ExchangeInstallPath%\Bin\Search\Ceres\HostController\Data\Nodes\Fsis\<var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var>\Configuration\Local
    Here, “%ExchangeInstallPath%” is the Exchange installation root path (available in the environment variable of that name), and the placeholder <var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var> represents
    one of the following names. (There is one name for each of the four files that are to be edited.)
    Helpful articles
    http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
    http://exchangeserverpro.com/exchange-2013-manually-configure-dns-lookups/
    David Sheetz MCP

  • Installing the connector for microsoft exchange server 2010

    Hi All,
    We have installed AD connector 9.1.1.7.0 with OIM 11.1.1.5.0.
    Now Team is upgrading to Microsoft 2010 exchange server. As of now there is no direct provisioning for microsoft exchange server.
    Now we are trying to install connector for microsoft exchange and do the provisioning.
    So, what is the connector version should i use Microsoft 2010 exchange.
    can i install 11.1.1.5.0.Any help would be appreciated.
    Also please provide the minimum details which are required to connect to target exchange server or please suggest us some doc.
    Thanks in Advance.

    Hi Rajiv,
    Thanks for the reply. Can you please tell which version of connector i have to download?
    Thanks In Advance

  • Spam Protection for Email showing Critical for Exchange Server 2007 after installing Symantec Mail Security for Microsoft Exchange

    Hi there,
    I have SBS 2008, and I have recently installed Symantec Mail Security for Microsoft Exchange  version 7.5 but when I take a look on Windows SBS Console under Security, it shows "Spam Protection for Email Critical Exchange Server 2007" However,
    when I open the SMSME it shows running well with no problem..
    Any Suggestions???
    Thanks

    Hi,
    Would you please let me confirm whether all functions (which are related to Exchange Server) run as normal? Just
    a confirmation, thanks for your understanding.
    Please run
    SBS BPA and check if find relevant issues. In addition, please refer to GaryD9’s suggestion in following thread and check if can help you.
    SBS
    2008 & Forefront Protection 2010 for Exchange - SBS Console Error
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • SAP SMTP Configuration for Microsoft Exchange Online (Microsoft Hosted Solution for Exchange - Office365)

    Dear All,
    We are using Microsoft Exchange Online (Microsoft Hosted Solution for Exchange – Office 365) for sending and receiving emails. Now we want to setup SAP SMTP so that emails / notifications can be sending through SAP via Microsoft Exchange Online. It is quite easy to configure for setting SMTP Services for locally hosted Exchange Server. But this is the first time I am trying to setup for Microsoft Exchange Online.
    Current Instance Profile settings are as follows;
    is/SMTP/virt_host_1                         *:25000
    is/SMTP/virt_host_0                         *:*
    icm/server_port_2 PROT=HTTPS,PORT=44300,PROCTIMEOUT=300,TIMEOUT=600
    icm/server_port_1                           PROT=SMTP, PORT=1080, TIMEOUT=180
    icm/server_port_0 PROT=HTTP,PORT=8000,PROCTIMEOUT=300,TIMEOUT=600
    ms/server_port_0                            PROT=HTTP,PORT=81$$
    SCOT Settings are
    Mail Host             smtp.office365.com
    Mail Port              587
    Following are the settings for configuring Outlook for Exchange Online – Office 365;
    Server name
    Port
    Encryption method
    POP3
    outlook.office365.com
    995
    SSL
    IMAP4
    outlook.office365.com
    993
    SSL
    SMTP
    smtp.office365.com
    587
    TLS
    Please assist if any one configure office365 with SAP.

    Hello Majid,
    Were you able to setup SCOT for Office365 online, I have to setup same.
    Can you help with some guidelines on how you setup.?
    Regards,
    Ashish

  • Kaspersky Security 9.0 for Microsoft Exchange Servers

    Is anyone using Kaspersky Security 9.0 for Microsoft Exchange Servers with Microsoft Exchange 2010?
    We use Kaspersky for SharePoint and it is a good product.  We currently use Forefront for Exchange but that product has gone away.
    Our Exchange server is protected by McAfee/Intel's cloud SPAM and Antivirus product, but we want an AV solution that is installed on the Exchange server as well.
    I cannot find any real world reviews for Kaspersky Security 9.0 for Microsoft Exchange Servers can any Spiceheads help me out?
    This topic first appeared in the Spiceworks Community

    Hi Amol8k,
    Welcome to Nokia Forum!
    Have you tried contacting the developer of this application? Try contacting them first so that they can provide you right resolution for these matters. You can reach them through this link: http://support.kaspersky.com/. Let us know what will be the outcome of this.

  • Language Pack For Microsoft Lync 2013

    Hi,
    Do you have any idea when will Language Pack for Microsoft Lync 2013 be released?
    Thanks,

    Hi EAskaroglu,
    Lync 2013 is part of Office 2013, you can install the language packs for Office 2013.
    There is no language pack for Lync Server 2013, you can choose the language when download the installation package.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Microsoft Exchange 2013 eDiscovery - specific search query: looking for specific hyperlinks within e-mails content/body

    Dear all:
    I am currently using the MS Exchange 2013 eDiscovery feature with the objective to identify which of my users have received emails containing specific hyperlinks (e.g. http://website1/webroot/file.zip, http://website2/webroot/file.zip, etc.) from an unknown
    sender.
    To this end, I have been creating an eDiscovery on-hold case looking for a specific search criteria in all mailboxes.
    As the search criteria, I have tried many options but was unable to obtain satisfying results: I know I am missing some e-mails from this specific search (I checked manually). I have notably tried the following search queries (with and without the body:
    search operator, with and without double quotes, etc.)
    body:http://website1/* OR body:http://website2/*
    body:"http://website1/*" OR body:"http://website2/*"
    body:"website1*" OR body:"website2*"
    body:"*website1*" OR body:"*website2*"
    When replaying these queries on my local Outlook client, everything works fine and I get results as expected.
    However, when going through the ECP eDiscovery feature, I am missing some results.
    Therefore, I am looking for any advice on what Exchange eDiscovery KQL query I should use to identify all emails containing, in their message body, a list of specific hyperlinks/URLs.
    Many thanks in advance for your help.
    S.

    Alas I do not know the answer to resolution via ECP and like you I have found it to be a bit maddening to use ECP for discovery tests Ive done when comparing results with our DigiScope product.  I know we can accomplish what your looking to do via Regular
    Expression but again that's with a 3rd party tool. 
    One thought is I suppose it could be an indexing issue with the DB, so perhaps rebuilding the index would help?
    If you do get it working I would love to know the resolution since many of my tests with ECP have left me yelling at the screen.  When its works its cool when not well...
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
    --> 2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • What are the supported feature for LYNC Server 2013 WITHOUT Telephony

    Hi
    I have a new customer who is asking for LYNC Server 2013 without to use VoIP Support.
    The would like to use the LYNC-SKYPE connectivity but without LYNC calls.
    Most of their internal users are using SKYPE.
    The Question is now, what Features are possible for example:
    FEATURE-LIST
    See other’s presence
    Manage own presence
    See presence in Office
    Contact management
    Contact card
    PC-PC and multiparty IM
    PC-PC and multiparty file transfer
    Persistent Chat
    PC-to-PC computer audio calling
    PC-to-PC computer video calling
    PC-to-PC presence display, IM, audio, and video with Skype users
    But what of the above feature list is possible without using VoIP ??
    And how works that LYNC WebApp Client without VoIP? Is it possible to route Audio/Video over the internet by using that LYNC WebApp Client in LYNC 2013??
    Thanks in advance ;-)
    Kind regards
    Michael
    Kind regards Michael Damaschke

    All of that is possible without PSTN connectivity or the plus cal.
    When you say VoIP, do you mean audio chatting over TCP/IP in the purest form, or do you mean specifically telephone calls?
    Technially PC-to-PC computer audio calling is VoIP, or voice over IP, but if you're talking about connecting it to a PBX or the phone network, you don't need it for any of the above.  It works wonderfully and is quite a bit cheaper without it due to
    fact that you won't need to license the plus cal for enterprise voice or the Exchange enterprise cal for voicemail. 
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

Maybe you are looking for