Chat for CAD in CCX 8.5

Hi everyone,
I installed ccx 8.5 but now i need configure chat for agents, for instance:
agents should only chat with supervisors or supervisor with agents, not agents with other agents. I have tried to figure out some information, but until now i haven´t found any about that.
I appreciate any comments.

You cannot configure the option for Agents not to chat with each other.  As a work around, you could remove the chat button from all CAD clients, this way, only Supervisors can initiate a chat with them.
If you saw a demo of a "buddy list," then you probably saw UCCX integrated with CUPS, in which case, you can configure groups of SME's and assign them to teams.  Also, if an Agent logs out of CAD, and then into CUPC, they can build their own personal contacts, so when they sign back into CAD, they see that list as well.

Similar Messages

  • Chat feature for CAD BE

    Is the agent chat feature available on CAD-BE.  I log in on CAD-BE and I do not see the chat feature.
    Thanks

    Hi
    Found this note in the CDA user guide for 8.x :
    NOTE:
    For CAD-BE agents, a high priority chat message can be sent but it cannot be replied to by the supervisor, because CAD-BE agents do not have chat capability.
    Aaron
    Please rate helpful posts...

  • Chat within CAD UCCX 8.5

    Is there a way I can leave chat enabled for CAD, but have it not show the users states (IE: Not ready, ready) in the "friends" list? So instead of showing the users name and status, it just shows the name of the agent.
    Thank you,
    -Jake                  

    As far as I know this is not a configurable aspect of CAD.
    HTH
    Tanner

  • I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

    I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

    You need to use a credit card with a billing address in the same country as the delivery address.  Since there's no Apple Print Store for Costa Rica I assume you're using the United States print store.  Therefore you'll need a credit card with a billing address in the US.
    OT

  • (CES2014)MSI Best Laptop for CAD & 3D Modeling photo gallery

    Las Vegas, NV, United States,CES2014,1/6~9
    GT60 2OK 3K IPS Edition (K3100M) & GT70 2OL (K4100M)
    GT70 2OL (K4100M)
    Best Laptop for CAD & 3D Modeling
    GT70 2OL demo stration.
    GT60 2OK 3K IPS Edition (K3100M)
    Best Laptop for CAD & 3D Modeling
    More new photos, will continue to update on this topic.

    WoW K4100M is a very powerful Quadro solution:)

  • Spro Settings for CAD Desktop

    Hi Experts,
    Can you please guide me what spro settings needs to be done for implementing CAD Desktop. I have gone through the SAP Library notes but still confused regarding the IMPLICATIONS of the fields under CAD Systems in spro like Group Maintenance, Applications, Parameters etc.. What are their implications and what settings need to be done?
    If any of you have got SAP notes on the Implementation and Spro settings for CAD documents, Please forward me.
    Thanks a lot in advance....

    Hi,
    for CAD Integration you also need the plug-ins for the CAD Systems. In the installation-guides for the plug-ins you also find the required settings for the CDESK customizing. In addition a lot of information - especially about the parameters - can be found in the notes (service.sap.com/notes).
    More info on the plug-ins: http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
    Best regards,
    Martin

  • Chat for Channel Partners in CRM 2007

    Hi Gurus,
    How can Chat facility be provided to Channel Partners in SAP CRM.
    Please tell the prerequisities to provide the facility in SAP CRM.
    The requirement is that the chat facility will be used by channel partners to chat with a central helpdesk and viceversa.
    Thanks,
    Sarat.

    Hi Sarat,
    You find more information related to "Chat for Channel Partner" under the key word "Live Support" or "Live Web Collaboration" , for example when you search the CRM 2007 documentation in the Help Portal (http://help.sap.com).
    The Live Web Collaboration is part of the CRM Web Channel capabilities which enable real-time communication between the online partner and a live customer service representative, using the following capabilities
    - Immediate personal assistance at your fingertips
    - Ability for partners to choose their preferred communication, such as Chat sessions, or E-mail
    - Routing to the right agent at the right time
    - Agents provided with context information to best serve the partner
    Hope this helps.
    Best regards,
    Carolin

  • Voice chat for LAN Working :) ,  but For Internet Voice Chat Not Working

    Hi, all I have developed voice chat for lan , but when i try to connect to internet it doesn't working. Pls let me know the reason why is it so?
    I am behind the Firewall and firewall doesn't allow me to connect to server or transmit RTP data to the another User. Why is it So. Please Reply As Soon As Possible!!!!

    That's exactly what i am talking about. Your IP address is private. Means, it is not routable outside your organization. Means, that you cannot receive anything from outside, because technically this private address does not exist outside your network.
    However, you might be able to send audio to someone outside who has public IP address (PLEASE, read up about private and public IPv4 addresses and NAT in order to understand what your problem is. Just one Wiki page that you can dig up in Google.com).
    Now you simply cannot use your chat from inside your organization to chat with outside people. It will not work. You need public IP addresses in both ends (i.e. you and remote party) + firewall rules must allow UDP traffic for certain ports, that your program uses.
    If you want to overcome private addressing problem manually, i dont know how to do it. But what i know for sure is that it would be painful. My application that i made uses a VoIP server (SIP server and an RTP proxy server). These servers do private address handling (NAT handling) for my audio/video streams.
    You have an option though. Go to your network admin and lick his/her brain. Ask for a public IP address (they might have some in reserve). Do the same thing at the remote end.

  • Need Video Chat for several users / one platform

    Need Video Chat for several users / one platform
    I thought Facetime might be good, but it works only for Apple. So, Skype it is.
    Need a way to let users to video chat. Any suggestions?

    You can use Skype group video call which is free.
    Want to record Skype calls, check out at:
    hereandhere

  • Can I use i-chat for free on my i-mac or I have to pay?

    I have internet service and a yahoo account I primarily use. I know the mobile me account costs money. Is there anyway to use i-chat for free and video-conference?

    Yep,
    An AIM name costs nothing.
    In iChat 4 the Get an iChat Account button in the Add Account slide out links to an Apple page where you can get a free @mac.com name. (I have linked you to the page)
    The Button in my iChat 5 takes me to the AIM site for new names.
    12:53 PM Sunday; October 18, 2009
    Message was edited by: Ralph Johns (UK)

  • Trying to contact chat for over 2 hours!!!

    is it normal to wait 2 hours for someone to speak to on chat!!! when I try phoning 202 from my mobile I get nearly through then get cut off feeling a little annoyed now tried to start a conversation @ system: at 13:05:52 its now system: at 15:02:23        

    even when trying to complain to them, im in a live chat for 1 hour, on a different tab, keep trying to phone but only get so far then they cut me off 

  • Cannot reach live chat for a Photosmart 7520 connection issue

    I am trying to reach live chat for a connection issue which I dealt with last week with my Photosmart 7520. I have  case number and my printer is under warrenty. 

    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.

  • BlackBerry Chat for PC

    Hi,
    Perhaps one of the most widely complained about issues regarding the playbook is the lack of Skype.
    Irrespective of blame for this shortfall ( Skype or rim) this functionality would be greatly appreciated.
    As a suggestion, if Skype will not come to the party then RIM should think about producing a client for BB chat for PC.
    Registered BB owners could have a basic account allowing them to specify a limited number of contacts.
    The assumption seems to be that everyone should buy a PB. This is not helpful and not practical.
    In short, if Skype wont come to the party get over it and go your own way and provide something better that everyone wants. With video chat RIM already has the infrastructure in place and providing a PC client should be reasonably straight-forward.
    Regards, Graham.

    Maybe this will help
    http://www.theverge.com/2012/8/6/3223090/skype-for-browsers-webrtc-standard-proposal-w3c
    Sods law says it will only work in IE!

  • 2 X person video chat for Intel Qs

    Hey I know the specs required for doing a multi person (eg, more than 2 people) video chat for PowerPC processors, however I was wondering what the spec requirements are for the Intel ones... I am primarily directing this towards the Mac Mini Solo v. Duo which I am assuiming the Solo could be the only one that might have limitations (like my poor powerbook...).
    SO my question is can a Mac Mini Solo HOST a multi person video chat OR is it like my powerbook and other "slower" apples that can only join multi chats yet cannot host them? AND if the Solo cannot HOST a multi person video chat CAN it at least JOIN a multi person video chat?
    AND finally JUST to make sure there are no compatabilities problems, can a intel based apple multi-video chat with a powerpc apple?
    Thank you,
    TM

    Hi T.M.,
    Go to System Preferences and then Quicktime.
    Select the Streaming tab.
    In the drop down se the speed to match your download speed.
    If it faster than 1.5meg then use 1.5 meg.
    11:34 AM Thursday; April 6, 2006

  • Help- how do i get in contact with Apple via mail or chat for support?

    Help- how do i get in contact with Apple via mail or chat for support
    This is ridiculous, why can I not get in contact with Apple by email or chat with their support team?? How to do, please help.

    You cannot contact Apple support by e-mail or via chat.
    You have to contact AppleCare by telephone.
    If there is an Apple store nearby, visit the genius bar.

Maybe you are looking for