Chatteremail error and continuous reset loop - IMAP error when i don't have an IMAP account set up!
A few weeks agoo I suddenly started receiving an error when I try to synch my Chatteremail. I have 2 POP accounts set up on the phone. When I attempt to QuickSync, I see in the status area that I am logging in. . .and then I get a pop up error that says "no more than 8192 messages can exist on an IMAP server. the remainder will not be synched." i choose OK and then the phone resets itself and continues in this loop until i get it to stop trying to connect and choose to work offline. I don't even have an IMAP account on this phone so I am very confused. . .
I have tried to contact Palm Support but they are not getting back to me (despite their 24 hour response time promise). Any ideas? I made no changes to my email set up on my phone nor downloaded any software before this happened - it truly came out of nowhere.
edited to add: I have also deleted all emails off the server and tried the sync again, with no luck.
Post relates to: Treo 700p (Verizon)
Message Edited by atsmith on 04-17-2008 08:33 AM
Did you ever get a solution to this? I am now getting that same message. I am now unable to use chatteremail.
Anyone have a fix?
Post relates to: Treo 755p (Verizon)
Message Edited by aminoff on 07-25-2008 05:20 PM
Message Edited by aminoff on 07-25-2008 05:21 PM
Similar Messages
-
How do I erase all the content and settings on my 8GB ipod touch without the password or the original computer? This is very frustrating and I think I have it in the DFU mode. I can't seem to figure out how to completely restore this ipod touch. Please help.
Did you get a message in iTunes that said iTunes found an iPod in recovery mode? If not then you might have not gotten the iPod in recovery mode. Try using this program to get the iPod in recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode -
My new computer is 64-bit running Windows 7 pro, SP1 and Microsoft Office 2010 Pro Plus 32-bit
My phone is a 4S runing iOS 6.1.3
Very frustrated now that I have recently installed itunes and outlook on this new computer. Everything worked perfectly ok on my laptop which was also 64-bit Windows 7 and running 32-bit Microsoft Office 2010 Pro. I have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, when I sync the calendar and contacts are empty. Not sure if there is any way to point itunes to particular address books and calendars.
I have installed and uninstalled itunes 3 times and thank goodness have a backup
Can anyone help please?
thanks in anticipationI had my home computer set up to sync to work's Exchange server. It worked well, but I didn't like seeing work email messages and other programs trying to sync with my default Outlook folder, which was then the Exchange (& work related) .ost file. I know there are various ways to manage those problems using filters, view, subfolders, etc., but it was a hassle for me. I think it could work well for many other folks.
For now, I have published my work calendar and subscribed to that calendar on my home computer. So I have view only access to my calendar on my home computer (and I can add/edit calendar items on my iPad (or Outlook Web Access) when away from work). This is not quite what I wanted, but it may work.
It almost makes me long for the days when I used my Windows Mobile Treo to sync back and forth between exchange at work and outlook at home (but had many sync conflicts as a result). -
I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?
Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.
-
I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?
error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT -
I would like to update my Adobe ID and main email - I'm getting an error when trying to do this in my account settings. Any tips?
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019 -
whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.
Welcome to the forums.
Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings. You could start a new iDVD project, or try deleting encoded assets.
Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have). Double layer DVDs can be finicky and are used for video more than 2 hrs long.
Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
For a detailed treatise, see: https://discussions.apple.com/thread/3926901?tstart=0
John -
For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup. Setup installs iTunes in the 32 bit application directory (Program Files x86) - it's not all that unusual to run a 32 bit app under a 64 bit OS - BUT whenever I connect any of my iPhones, I get an error message that say I cannot use the iPhone because the 64 bit version of iTunes is not installed. The message then tells me to de-install iTunes and to install the 64 bit version.
Like I say, the 64 bit Setup version is selected for me, and it runs error-free, but I seem to have no control or ability to force the installation of a 64 bit iTunes app. And all the iPhones are inoperative with the 32 bit version I have. I have another PC, which I have held at an earlier iTunes release. Although it's a notebook, it's identical in every other way (OS & installed utilities and apps) to the desktop that has developed the problem, and my iPhones work fine with it, although iTunes on it is at the earlier release, and I have no intention of upgrading that version until I understand and have corrected the problem.
Any ideas or suggustions?
Thanks.This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Hello-
I can't open itunes on my HP laptop that uses Windows 7. I keep getting the error message "you don't have the proper permissions to open this file". I removed all Apple downloads and reinstalled itunes 10.6.3 windows 64-bit numerous times, but I still get the same error message. Please help.Just want to add that after hours of searching and following every different blog on this issue, iTunes/apple you have lost my vote. What a joke...!
-
I am trying to update to OS X Mavericks but I cant seem to. Everytime I try to install it, I get an error saying I don't have enough disk space or FindReaperFiles closed unexpectedly. What do I do?
That isn't the problem. When I start the download of Mavericks I have more than enough space on the disk drive. However, once it has downloaded and it is attempting to install this error occurs:
Any ideas where I could re-download FindReaperFiles? From what I can see it's an Apple file but I can't find a download on their site at all.
Thanks! -
Hi ALL,
hope you are well.
I can't remember my Answers for the security questions and i can't reset my Security questions because i don't have a rescue mail what can i do?
and i tried calling the security support team and they told me they will send me an instructions how to do it and still got nothing till now.
So please can i have some support.
I'll appreciate your help.
ThanksReset Security Questions
There are several different methods. Try one. If it doesn't work,
then try the next one. Don't try to do everything at once.
Frequently asked questions about Apple ID
Manage My Apple ID
Note: you may need to continue entering false answers to the questions until you trigger the response needed to start making changes. It will take six or nine retries.
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
I'm trying to compress a file but I get an error that "I don't have permission to access dovecot." How do I get this permission?
I ended up doing just as you said and downloading the program seperately. However, I'd like to point out that after I downloaded the server.app to my MBA it did allow me to compress it. For some reason it wouldn't let me do it from the server so I could airdrop it over. I'd only get the error previously mentioned. Must be a server thing eh?
-
Why do I keep getting "the disk you inserted was not readable by this computer" caution message when I don't have a disk inserted???
Unfortunately, I saw this error for the first time this morning. It's on my wife's iMac running Lion, and it appeared when the machine locked up on a Software Update screen prompting her to run an update (I'm assuming this was the recent Security Update).
After numerous failed attempts to force-quit or otherwise safely restart, she hit the power button, and when the machine came back up it failed to recognize the startup disk. I've since successfully restarted from several different (external) startup disks without incident, but each time I attempt to fix the internal drive via Disk Utility the disk shows only as "Media" and all the usual options to Repair or Verify the Disk are greyed out, leaving only the Erase Disk option.
Are we totally hosed? -
I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.
Hey Frankgates!
I have an article here that can tell you how to do this:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation..can anyone assist?
See:
iPhone - not enough access privileges: Apple Support Communities
Maybe you are looking for
-
Z table middleware replication from R/3 to CRM
Looking for a CRM Middleware Guru out there !!! I'm trying to replicate a simple R/3 table (list of countries in my example below. The replication must include both initial and delta downloads. My problem is the following: When doing an initial load
-
My phone keeps coming up not connected to wifi what can i do?
phone keeps coming up not connected to wifi what can i do?
-
Dear SRM Experts, We are trying to implement this bussines process. 1-Create a PR in R3 (Direct and Indirect materials) 2-Transfer them to SRM, with PDP 3-Create a Bid Invitation with reference to this PR (we belive that the PR maintains the same num
-
Hi All I am writing a calculation for a client to copy one version to another version for an Essbase ASO application. It seems to work correctly when my POV is set on a smaller datapoints. Hower it seem to have issues when fixed on larger datapoints.
-
Sample code for offline PDF forms submit to workflow
Hi, I have a XDP form which needs to be submitted offline by the user. So i have saved the XDP as dynamic PDF. On submit of this PDF the code flows to the servlet. I am getting the following error: "com.adobe.formServer.interfaces.ProcessFormSubmissi