Cheapest option for someone new to mac wanting to use xcode and try develop
Hi
Apologies if this is in wrong location but couldnt find a general section
I havent used mac before, looking to find cheapest option to get in to the mac World and try my hand with xcode / develop the likes of an app for iphone for fun
Had found a imac5 1 but when I researched further it would appear that I might not be able to use this for latest version of xcode and therefore wouldnt suit my need. Shame as I think I could have got it for €300
Am I correct - in that its not suitable?
Any suggestions on what else would be suitable or where I could start?
I couldnt afford to spend €1,000 or more on a new mac whether it was desktop or laptop etc.
I want to get something thats useable (not from the dark ages) but realise that I may have to go back at least a few years thus the reason I was looking at the imac5,1
Thanks for your time. Any help advise etc would be appreciated.
The latest XCode requires OSX Lion. That requires:
Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of RAM
Mac OS X 10.6.6 or later with the Mac App Store installed
At least 4GB of additional disk space to accommodate the download, but more is obviously recommended
Thus, assuming that whan you said imac5 you were referring to an iMac with an Power PC G5 processor you are right i that that is not compatible.
There are some Mac with an Intel Core sSolo and just Intel Core Duo processor that will not work with the latest XCode.
I would look for a Mac Mini 2007 or later since those meed the XCode requirements
Similar Messages
-
I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?
Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry -
Is there a discount option for someone running Logic 8 who wants to upgrade to 9? I know the price of 9 has been reduced in the App store but there always used to be a discounted upgrade option. Just wondered.
Hi
Short answer.... No... not any more
CCT -
Hi there. I'm having a problem with my external hard drive. Actually with only one of them (others seem to be ok...). The problem is that when clicking the right mouse button (or using other ways to do the same), in the drop-down list there isn't an option for "create new folder". Please, can anyone help with this issue?
The drive is NTFS formated. Most probably that's the reason, but there is some info on the drive which I wouldn't like to loose. If there is a way to re-format the drive and save the files, that would be great. If there isn't such a way, then please, tell me how to re-format it. But bear in mind as well that I'm using Parellels and the drive is to be used in Mac and Win modes, both. Just to add some more info: my other drive is FAT32 formated and all seems to go well with it.
-
hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.
A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here. -
When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!
Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel -
Where can I buy a case for my new white Mac Book?
Where can I buy a case for my new white Mac Book?
Speck Products now makes cases for the 5th Gen Touch.
-
In updating my iphone 5 for the new software ios6. An error occurred and now is asking me to restore settings. But I don't want torestore setting causing not all of my recent data has been synced and I don't want to lose my data. How can I undo this since i did not hit restore settings, yet i can't do any other move without restoring at this point. Any ideas?
You phone is in recovery mode. Your data is already gone.
Why you would attempt a software upgrade without backing up all your data first is beyond me, but to each his own.
In any case, sorry for your data loss. -
Cheapest option for buying Visual Studio 2015 for development
Last year I bought Microsoft Action Pack subscription thinking the software they give me will last forever, but all software downloaded have turned into Trial version as Microsoft says they were for internal use till subscription lasted.
What is the best and cheapest option for buying Visual Studio 2015?
Please advise
This topic first appeared in the Spiceworks CommunityLast year I bought Microsoft Action Pack subscription thinking the software they give me will last forever, but all software downloaded have turned into Trial version as Microsoft says they were for internal use till subscription lasted.
What is the best and cheapest option for buying Visual Studio 2015?
Please advise
This topic first appeared in the Spiceworks Community -
My father in law has a brand new iPhone 5s using iOS 8.1.1 - under settings, general, keyboard, all keyboards... There is no option for 'predictive'. Has anyone else had this? And if so, how can we make it appear? Many thanks!
What langauge is he using? Is it one of the supported languages?
See here: https://www.apple.com/ios/feature-availability/#quickType-keyboard-predictive-in put -
New at mac want to learn iOS App development, tried to install xCode from App Store it says upgrade to 10.8 or later req. P.S already tried updating to Mavericks OS X this laptop is not supported. guide me through the process
If you register as an Apple developer, you can download previous versions of XCode.
https://developer.apple.com/support/xcode/ -
how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
Cessna007 wrote:
how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a -
I have a new Time Capsule, want to use it in conjunction with an iMac G5 and a MacBook. MacBook runs Snow Leopard, but G5 (lacking Intel processor) can't install Snow Leopard, is stuck at OS 10.4.11. Am I doomed? Will appreciate any advice. Thanks.
you should still be able to get a copy of Mac OS X 10.5 (Leopard), which should run on your G5.
-
Why is there not an option for none because i dont have a credit card and there is no none button
Create a new ID by following the steps in this article exactly as written: http://support.apple.com/kb/ht2534. Pay attention to step 3; you must first download and install any free app then create the ID.
Maybe you are looking for
-
Sync multiple (but not all) photo folders?
I've got a new 4G Touch and I am trying to figure out how to sync multiple folders containing pics to the iPod, preserving the folder structure on the PC to the Album structure on the iPod. My device allows the following: 1) Sync all photos from Phot
-
Production order in the additoanl tab b in sales order
Hello gurus, I have to create a new field on sales order item(additional tab b) where the production order would be filled via a batch job. Then i have to create a z-program to populate the new field added (this would run everyday). selection screen
-
I need to download page maker 7.0
I need to download page maker 7.0. I was told to go to https://www.adobe.com/support/products/pagemaker.html but it is not the. I have gone to your ftp site and downloaded pm07eng.exe but it will not execute. We are trying to uninstall Page Maker
-
How can add captions or title to a picture now that iPhoto doesn't work after updating to iOS 8.
I Have updated to iOS 8 and iPhoto is dismissed. How can add a caption /title (not in the image) like I was used with iPhoto? Photos has not this feature. please, could anyone help me. I'm a real beginner. Thanks,
-
Apple official unlock o2 UK carrier
Hi I live in Germany but i am soon moving back to italy. I bought myself an iphone 3g 3.1.2 and it said that it has a carrier lock to o2 UK (iphone was bought last week from london) Now i have heard that apple has released an official unlock for ipho