Check amount -foreign vendor

HI,
we paid a foreign vendor thru check.when we printed out the check ,the amount was messed up, decimal places got displaced, if actual amount was 3,475.00 it printed out as 3.475,00
I know its cuz of country format, cuz vendor belongs to columbia.But if I change the country currency format,the change would be at the clinet level and our other companycodes may get affected.should I change the country currency format or is there any other way to correct it?Thanks
Regards
Shaun

Thanks Andrew for quick reply, but currency format in the form is comptible with US format, and we run the checks in US$ for these foreign vendors with local vendors, its just these vendors belong to a country other than US in the master record.one simple fix could be to change the country in master record but client dont agree on that.
Regards
Shaun

Similar Messages

Check format for Foreign Vendor

Hi guys,
When we need to pay a foreign vendor thru check, the currecny format and date format defaulted from that vendors's country' and most of the time its different than US format.
I am using alternate payee to cut the check for foreign vendors in US currency ,date format.Is there any other way we could achieve this without creating another master record for foreign vendor??
Regards
Shaun

HEllo Shaun,
I believe you can add some source code to your form to change the format of the currency and date depending on the country.
Regards,
Renan

Cheque Amounts for Foreign Vendors

Hi All,
My cheques for canadian vendors are printing fine, but my cheque amounts for foreign vendors have the wrong format.
Eg.: 1,317,150.00 is printing 1.317.150,00 (The commas are being replaced by periods and vice versa).
Amounts for both Canadian and foreign vendors are in CAD$.
How can I set the format to display correctly? Points will be awared generously!!
Thanks,
Deki

I didn't change any parameters. They were set correctly to begin with. Any other ways I can fix this?
Thanks,
Deki

F110 Auto payment with Check in foreign currency and Doc currency is LC

Hi Guru,
When I try to use auto payment for document currency in local currency, while check is foreign currency, it always in the expception list, could you advice how to handle this scenario. thanks.

Hi
From the log you mentioned check for the following things:
In FBZP -bank determinationin Ranking order---Pymt-C with currency USD and rank order 1 and housebank has been mentioned.
In bank accounts in the dialogue module below ranking order the entries are made for bank account for the above.
and in available amounts make the suficient amount available for this bank
Also Check whether the Payment method C and the housebank details are mentioned in Vendor master record.
Regards
Aravind
Assign points if useful

How to pay a foreign vendor on a French Bank Account

Hi Team
We have a issue where we need to clear a Forien Vendor.
So we used a payment menthod say "T" where is marked Foriegn payments allowed.But F110 did not work as the Bank Account was Local .
Company belongs to France
Vendor belongs to Swiss
Vendor Bank Account Belongs to France
So clearing Foreign vendor with Local Bank Account,is not possible
So please advice us what are the settings to be done where we can clear the foreign vendor.through F110.using a payment method wich alloes FOrien vendor using Local Bank Account.
Thanks
Swetha

Hi Sujatha,
All the settings of F110 come From FBZP, have you check the following :
- FBZP--Ranking Order : is you Bank in the first Rank
- FBZP--Bank Account : in your case you must have this entry
House Bank : Name of the Local Bank Account (France)
Payment method : T
Currency : CHF
Bank Subaccount : your bank subaccount
- FBZP--Available Amounts : Check if you have an available amount for your Bank (France) and Currency (CHF)
Don't forget to check also if for this foreign vendor we have the payment method ' T ' in the master Data (Tcode : XK03)
Regards

Not able to post Realized Gain/Loss GL acct during foreign vendor payment

Dear Experts.
1. When I make a vendor payment by using F-53 for USD payment for foreign vendor. I am supposed to get Realised Gain /Loss account for the variation on payment date.
2. My local currency is INR and foreign Currency is USD.
3. DIrect quote and indirect quote maintained for INR and USD.
4. During payment I have selected USD currency and given the conversion rate.
5. When I paid to vendor, realzied amount did not capture.
My configuration for Foreign currency valuation is as follows:
1. T. COde OBA1. and KDB - Here I maintained unrealized gain and loss account
2. T. COde OBA1. and KDF - Here I maintained Realized gain and loss and unrealized loss and gain along with balance sheet adjustment account for foreign vendor reconciliation account.
Please suggest me for this issue.
Best Regards
Surya

Hai Surya,
Check the OBA7 t.code for doc type whatever ur using like KZ in that check the Exchange rate type specified or not like M,G, or B based on ur OB08 t.code settings
Regards
Madhu I

Error In Transaction F-44 for Foreign Vendor Payment

Hi Experts,
User is getting the Error In Transaction F-44 (G/L account 14281001 xxxx does not exit) while doing Vendor Payment to Foreign Vendors.
When I checked in Vendor Master Data, Reconcilliation account is maintained for all Foreign(other) & Foreign(Intercompany) Vendors.
The GL 14281001 is maintain in the account determination configuration for other Foreign Vendors.
User is getting this Error After successful FF67 transaction Process.
Please advice.

Hi Amitash,
GL is created @ COA level & not mark for deletion. This GL is not created in Company code. I discussed with user she was saying
F-44 transaction is booked a realized gain/loss while a foreign vendor invoice clearing vs payment. Normally this realized gain/loss must be booked directly to the foreign vendor account which is linked to GL XXXXXXXX for all IC foreign vendors and linked to GL YYYYYYYY for all other foreign vendors .
It will be not correct to book a foreign vendor realized gain/loss to a separate account therefore a new GL 14281001 should not be created in comp code XXXX, instead of incorrect GL14281001 SAP must select either GL XXXXXXXX for IC foreign vendors or GL YYYYYYYY for all other foreign vendors.

How to app run for foreign vendors and customers please tell the steps

hai every body this is raj
i am asking how to create the foreign vendors and how to apprun for foriegn vendors please tell the steps
and another questions is how to run app for customers t

Lets say your company code is in country IN. Every vendor you create (using XK01, lets say) with a country other than IN is a foreign vendor for your company code. To enable APP for foreign vendors, make sure you check the checkbox 'Foreign Business Partner Allowed' in 'Payment method in company code' in T Code FBZP. If the vendor invoice is in a foreign currency, make sure you include that currency as permitted currency for that payment method.
To run APP for customers, your 'Payment method in country' in FBZP must be for incoming payment.

With holding tax amount in vendor line lay out

Hi Experts,
I have posted an invoice in MIRO. After posting the document when I check the wittholding tax data tab in MIRO screen the w/tax base amt (WT_QSSHB & WT_QSSHH) and Wh tax amount (WT_QBSHB & WT_QBSHH) field has no value. TDS Deducted and posted. But the same fileds has values in data entry view screen when selecting the "display withholding information" in vendor account . This problem is only for MIRO entries. Because of this i am unable to bring the WHT tax amount in vendor line layout.
Kindly advise why no wtax amount was shown in the field 'w/tax column' even if the vendor is liable to tax.
With regards
RSS.

Dear All,
this is not an error but the Standard System Design. Please read the note 611844. Only if You insert manually the WT amounts during the posting You will see them into the WT TAB after the posting. If You make the System to calculate the WT Aamounts automatically, no WT amounts will be reported into MIRO/MIR4. You can see them into the follow on document.
I hope this helps.
Mauri

Payment program for foreign vendors

Hi Experts,
Can some body shed light on this..
Can we run the payment program for foreign vendors in their currency.. if soo what r the settings needed.Pls send in this mail iD ([email protected])
thanks in advance,
R.Manigandan

Hi,
Yes we can run the payment program for foreign vendors in their currency.
In FBZP double click on Pment Methods in Country
Select your country and double click on Currencies allowed
You can specify the foreign currency here. SAVE and Back
Double click on Pment Methods in Company Code
Double click on the company code
and Tick all the three check boxes for foreign payments and foreign currency payments. SAVE
This is the required config apart from the general configuration.
Hope it helps
Regards
Jyostna

Foreign Vendor payment

I entered an invoice from a foreign vendor who billed in foreign currency but wants to get paid in US dollar by bank transfer. The system correctly converted the foreign currency to US dollar. But in automatic payment run, it did not pay the vendor. The job log displayed the error "payment with currency BDT, payment method:no valid payment procedure". It also displayed "payment is not possible, beacuse of reported error" Payment proposal list shows " Error 006 No valid payment method found"
I am not sure what I am doing wrong. Your suggestion will

Hi Rashid,
Check in transaction FBZP-> payment methods in company code-> select the payment method you are using , check the foreign payments/foreign currency payment
select all the options as per your requirements
Assign points if useful
Regards
Genie

Foreign vendor Excise registaration requirement at goods receipt of importP

Hi All,
Let me know why does system ask to maintain excise registration data in J1ID transaction at the time of goods receipt.
Although this foreighn vendor doesnot come under local jurisdiction.
If required then what information need to be maintained.
Regards,
Vijaykumar P

Hi,
Let me know why does system ask to maintain excise registration data in J1ID transaction at the time of goods receipt.
Although this foreighn vendor doesn't come under local jurisdiction.
In import PO you have to vendor
1) Foreign Vendor
2) Custom Vendor
you have to do MIRO first for custom vendor,then maintain J1ID for custom vendor and in excise tab on miscellaneous tab check which vendor is there
Regards
Kailas Ugale

Excise details for foreign vendors, Error: 8I565

Hi Experts,
After upgrade from 4.7 to ECC 6.0 system throwing error message 8I565: Vendor Excise details are not maintained.
Foreign vendors do not have excise details, Is there any config/ SAP note available to ovecome this issue?
Experts Kindly respond.
Regards
NDS

Hi Jeyakanthan,
I checked that SAP Note, that is already there in ECC 6.0 EHP4.
This Note checks the vendors excise fields in Vendor master excise details and if found balnk throws the error message.
This note was not there in 4.7 so no error message was coming in 4.7
This SAP Note makes it necessary to enter a dummy data in vendor excise details.
But my client does not want to enter any dummy details in these vendor excise fields for foreign vendors.
Reg
NDS

Foreign Vendors ACH Payment

Hi All,
In my company, we are already processing Domestic Vendor Payments (USA) using ACH payment. We send EDI 820 to bank.
Our company requirement is to process Foreign Vendor Payments also using ACH Payment.
Could any one let me know what are the necessary steps i need to focus on to achieve our company's requirement.
1) Configuration part.
2) Vendor Master
3) Exchange Rates
4) What are the changes in EDI 820, which will designate that the payment is made to Foreign Bank.
Thanks
Rajanikanth.

I cannot answer all questions but here are some pieces that you need to look at.
In FBZP ("Pmnt methods in company code" option), you need to check the checkboxes 'Foreign business partner allowed' and 'Cust/vendor bank abroad allowed?' for the payment method you want to use. You need to do this in all company codes in which you want to use the payment method for foreign vendor payments.
Assign the payment method in vendor master. You will also have (foreign) bank data in vendor master.
Maintain daily exchange rates in TCURR table (OB08 transaction).

NRA withholding for payments to Foreign vendors

Hi
I would like to discuss with configurators from other US companies as to how they have implemented NRA withholding.
In particular, how they handle varying tax rates for certain countries under tax treaties.
Thanks
Deepa

How to determine the amount to be withheld
Question 16: If a payment to a foreign person (foreign vendor) is determined to be FDAP and U.S. sourced, how much should be withheld?
Answer 16: The statutory withholding rate is generally 30%. This rate should be generally applied to the gross amount of the payment. See Q&A-19 below concerning this rate.
Question 17: When should the tax is withheld?
Answer 17: Withholding is required at the time that the payment is made. A payment is considered to be made when the beneficial owner of the payment realizes income. There does not need to be a transfer of cash or other property.
Question 18: When should the tax withheld be deposited?
Answer 18: The amount of tax that the US withholding agent and is required to withhold determines the frequency of the deposits. The frequency could be annual, monthly, or quarter-monthly. Publication 515 details the specific rules for making deposits including the deposit due dates, which forms to use, electronic deposit requirements and penalties for failure to make deposits timely.
Question 19: Can the statutory rate (30%) be reduced?
Answer 19: If the foreign vendor is a resident in a country that has a tax treaty with the United States, the rate may be reduced. Each treaty has specific provisions which determine the reduced withholding rate. These provisions reduce the withholding rate based on the type of income and the status of the recipient.
Question 20: Is there a listing of treaties and rates to be applied?
Answer 20: Publication 515 provides a listing of tax treaties and the withholding tax rates to be applied to various types of income under each treaty. The Publication 515 is located on the IRS website which is www.irs.gov.
Question 21: How can a foreign vendor certify its foreign status?
Answer 21: The foreign vendor must provide the withholding agent with form
a properly completed W-8 or Form 8233 (see FAQ section 5 for further information).
5. How should the withholding agent properly document the foreign status or treaty claim of a foreign person
Question 22: Must we obtain documentation from a foreign person to support its claim of foreign status or treaty eligibility?
Answer 22: In order to reduce the amount that is required to be withheld on a payment of U.S. sourced FDAP income to a foreign person (foreign vendor), or to exempt such a payment from withholding tax, the withholding agent must have documentation from the foreign vendor to certify its non-U.S. status and, if applicable, its eligibility for the treaty benefits claimed. Such documentation must be submitted by the foreign vendor in the form of a Form W8-IMY Form W-8 or Form 8233.
Question 23: Which forms would be most commonly used by foreign vendors?
Answer 23: Form W-8BEN (Beneficial Owner), Form W-8IMY (Intermediary), Form W-8ECI (Effectively Connected Income) and Form 8233.
Question 24: When should Form W-8BEN be used by foreign vendors?
Answer 24: Form W-8BEN should be used by the foreign vendor to certify that it has non-U.S. status. If a treaty claim is made by the vendor Part II of the
W-8BEN must be completed to be eligible for the treaty benefits.
Question 25: When should Form W-8ECI be used by our foreign vendors?
Answer 25: Form W-8ECI should be used by a foreign vendor to certify that the payment is income that is effectively connected with a U.S. trade or business. No withholding is required on such income. Rather, such income must be on some cases, a W8-BEN can be provided by a U.S. Branchu2019s income tax.
Question 26: When should Form 8233 be completed by a foreign vendor?
Answer 26: If you make a payment to a non-resident alien individual as compensation for personal services performed for you in the United States, that individual may have to provide you with Form 8233 instead of Form W-8. See Form 8233 and its instructions for further information.
Question 27: Are we responsible for the validity of the documentation presented to us by the foreign vendor?
Answer 27: In order to rely on the documentation, it must be valid. In order to be valid, the documentation must meet the requirements of Treasury Regulation 1.1441 and must be completed in accordance with the applicable Form instructions (see Instructions for the Requester of Forms W-8BEN, W-8ECI, W-8EXP and W-8IMY).
In addition, in order for the documentation to be valid, the US withholding agent or multi-national must not know, or have reason to know, that the information provided on the documentation is unreliable or incorrect. If the US withholding agent (multi-national) has such knowledge, or if the documentation is invalid for any reason, the withholding agent must apply the presumption rules set forth in Treasury Regulation Section 1.1441, 1.
Question 28: When should the Form W-8 or Form 8233 be obtained from the foreign vendor?
Answer 28: In general, the documentation must be in the possession of the withholding agent at the time of payment.
6. How to report NRA payments and withholding
Question 29: What forms should we use to report payments to foreign persons (foreign vendors) of FDAP income that is U.S. sourced and any amounts withheld on such payments?
Answer 29: Forms 1042, 1042-S and 1042-T are the forms that a withholding agent (multi-national) must use to report payments to foreign persons of FDAP income that is U.S. sourced and any amounts withheld on such payments.
Form 1042, Annual Withholding Tax Return for U.S. Source Income of Foreign Persons should be submitted to the IRS in order to report the total aggregate NRA payments, withholdings and deposits made by the withholding agent during the applicable year.
Form 1042-S, Foreign Personu2019s U.S. Source Income subject to Withholding is an information return. The withholding agent should submit these information returns to the IRS and the payee in order to report the payments and withholdings made during the year that are specific to the payee, the type of income paid and the withholding rate. Form 1042-T, Annual Summary and Transmittal of Forms 1042-S should be used to transmit paper Forms 1042-S to the IRS.
7. What to expect from an IRS audit regarding NRA reporting and withholding responsibilities
Question 30: If upon audit, it is determined that there has been under reporting and under withholding, will the IRS assess penalties and interest in addition to the under withholding amounts due?
Answer 30: If deficiencies in reporting, withholding and depositing with regard to NRA payments are found on audit, the IRS will consider all applicable penalties, including, but not limited to the following:
Failure to file (IRC Section 6651)
Failure to pay (IRC Section 6651)
Failure to deposit (IRC Section 6656)
Failure to file information returns (IRC Sections 6721-6723)
Negligence (IRC Section 6662)
In addition, interest will be assessed on the under withholding.
Question 31: If upon audit, it is determined that there has been under withholding, on account of a failure to document any vendors, as described above what recourse does the withholding agent have in order to reduce the under withholding?
Answer 31: The withholding agent can obtain certification of foreign status and the treaty claim from the foreign vendor. This is accomplished by the vendor completing a valid Form W-8. A valid Form W-8 will allow a reduction in the under withholding from the 30% statutory rate for the type of income paid.
Since the documentation is being obtained after the payment is made, the foreign vendor should provide an additional statement indicating that all facts and elections made on the Form W-8 were true, correct and complete at the time of the payment. Documentation other than this statement might be considered based on the facts of the particular case.
Question 32: If the under withholding has been u201Ccuredu201D by obtaining a
Form W-8 or other applicable documentation after a payment, according to
Q&A-31 above and such documentation is found sufficient is there any remaining liability to the withholding agent?
Answer 32: In general, there is no remaining liability for tax, interest and penalties. Exceptions to this apply in case in which the withholding agent is relieved from the tax liability by showing that the underwithholding tax was paid by the payee. In those cases, the withholding agent may still be liable for interest and applicable penalties. In other cases, reporting-related penalties might still apply where no underwithholding results on account of the cure, but the filed Form 1042-S reflected incorrect information.

Check amount -foreign vendor

Similar Messages

Maybe you are looking for