Check and Verify USMT IMG file before formatting the system

Hi Team,
We are using 2 phase approach for migrating from XP to windows 8.1 U1 since we have Config manager 2012 R2. Its a refresh, replace and baremetal scneario
So 1st TS will just do user state backup using ADK8.0 USMT and backup the data on SMP.
2nd TS will format the system, install OS,install Apps and then restore USMT data from SMP
I am looking for some way to check the usmt data on SMP for the system before system is formatted. Can anyone give some pointers to do that in 2nd task sequence? I want if data (img file) is not verified, system should not format and TS should fail.
Regards,

Hi,
Do not use the option /c .
If an errors occur during the capture process, the ScanState command will not continue to run and the TS will fail.
For more information, please review the link below:
ScanState Syntax
http://technet.microsoft.com/en-us/library/dd560781(v=WS.10).aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

My time machine is not working and the disk utilities cant repair it and is asking me to format the drive again. How can I backup the files before formatting the drive so that I don't lose my files?

Hi
My time machine hard drive has stopped working after the latest update and the Disk Utilities says,:
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
How can I back up my files before reformatting when I can't even open the drive's folder?
Thanks for the help.

I think my time machine is not working correctly and I dont know how to get it back... I really need to get back my photos!!!!!
Exactly this was the way I USED to make restores of files and photos..
but know I CANT!!!!
When I am inside iPhoto y click on the Time Machine icon at the Dock and it goes to this...
at my right side there are the backups but when i click them nothing happens they are like NOT CLICKABLE...
PLEASEE!!! Help me!!

Blue screen, wont boot up, have checked and verified drives, reset pram/vra

Hi guys, my 3 week old macbook pro has died? Has been fine. Worked last night, shut down, turned on this morning and i got the apple logo grey screen with turning wheel, then a blue screen ... and i have been there all day.
I have used the hardware test (all ok), checked and verified drives (all ok, a couple files were modified not fixed) using the installation disk.
restarted a few times now and the same thing occurs, i cant get passed the blue screen. Using install disk and disk utility i can get to my desktop (very limited access can not really do too much)
does anyone have any ideas? thanks i have none as i have only used mac for about 3 weeks now!!!!

Hi and welcome to Apple Discussions...
a couple files were modified not fixed) using the installation disk.
Try booting from your install disc again. Sometimes it takes more than one pass.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If Disk Utility reports errors but cannot repair them, take your MBPro to an Apple store or Apple certified repair provider as it's obviously still under warranty.
Carolyn

Can I back up the files before doing the recovery?

Hello
If using the recovery disk to load windows (I have Windows Vista 32-bit) is it possible to save files (pictures, etc...) before wiping out these files on the hard drive?
I have not backed up some files and cannot access windows to do this now...am wondering if I can back up the files before doing the recovery?
Any help would be appreciated : )

Hello
You can try to start Vista in Safe mode. Start your notebook and press F8. Choose option to start OS in safe mode. When Vista starts connect external HDD or USB memory stick and copy all your data there.
I have done this three weeks ago. I was not able to start Vista properly due to blue screen.

HT201250 My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what

My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what I.

Read through the links here, calm down and take your time.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

Hello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden

Why can't I update any apps? When I hit update it gives me an old id. But in settings my new id is totally set and verified. How cam I make the change in App Store?

Why can't I update any apps? When I hit update it gives me an old id. But in settings my new id is totally set and verified. How cam I make the change in App Store?

App purchases are permanently tied to the ID with which they were purchased. They cannot be transferred to a new ID.
You will have to enter the password for that ID or delete the apps and re-purchase them with the new one.
~Lyssa

Firefox will not remember passwords even tho the box is checked and there are no exceptions listed. The little bar asking to save passwords doesn't even come up.

After an online session, Firefox (6.0.1) crashed and a crash report was sent. After that, Firefox would not start and the crash window kept coming up. I uninstalled it and did a new install. It works fine now except it will not remember passwords even tho the box to save is checked and there are no exceptions listed. The bar asking to save does not come up.

Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

When I try to connect my iPod 4th gen to my computer I get a message stating that it may be corrupted and asks if I wish to format the disc. However, I have hundreds of songs and photos that I don't want to lose. What can I do?

When I try to connect my iPod Nano 4th gen to my laptop I get a message that my device may be corrupted and asks do I want to format the disc. However, I have hundreds of songs and photos that I don't want to lose. What can I do?

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

Validate the input file against a given schema inside an orchestration and producing 2 different files based on the validation result

HI All,
I have a situation.
I need to validate the input file against a given schema inside an orchestration and producing 2 different files based on the validation result.
A predefined success schema in case of validation success and negative schema structure for validation failure.
any advice ?

Hi Rachit,I following the blog
http://dietergobeyn.be/validating-biztalk-messages-orchestration/ and stuck in few things
I created a helper class with the name Validation and following code
[Serializable]
public class Validation
private bool _isValid = true;
public bool Validate(XmlDocument document, Type schema)
XmlSchemaSet set = new XmlSchemaSet();
if (typeof(SchemaBase).IsAssignableFrom(schema) && !schema.IsNested)
set.Add((Activator.CreateInstance(schema) as SchemaBase).Schema);
ValidationEventHandler eventHandler = new ValidationEventHandler(HandleValidationError);
document.Schemas = set;
document.Validate(eventHandler);
return _isValid;
private void HandleValidationError(object sender, ValidationEventArgs ve)
_isValid = false;
public static bool ValidateMessage(XLANGMessage msg)
XmlDocument xDoc = new XmlDocument();
xDoc = (System.Xml.XmlDocument)msg[0].RetrieveAs(xDoc.GetType());
Type t = typeof(Schemas.External.Invoice_v3_1);
Validation validation = new Validation();
return validation.Validate(xDoc, t);
First thing, Do i need to write the ValidateMessage method inside the helper class or not ??
If inside, how to add the reference of schema files in the statement (Type t = typeof(Schemas.External.Invoice_v3_1);)
I tried adding the reference of my schema project but it is showing error.
And what is to be written in the ValidateMessage expression shape in Orchestration ?
Really appreciate your help.

Function module to get the file path in the system for TEMP folder

Hi All,
Is there any function module that I can use to get the file path in the system for TEMP folder.
I mean, i am supposed to give only TEMP as the input for that function module and I need to get the path of that in the system as the output.
I am unsing 4.0 version.
Please advice.
Regards
Ramesh

In Higher versions, we can use the below code:
call method CL_GUI_FRONTEND_SERVICES=>ENVIRONMENT_GET_VARIABLE
    exporting
      VARIABLE   = 'TEMP'
    importing
      VALUE      = LV_TMP
    exceptions
      CNTL_ERROR = 1
      others     = 2.
if SY-SUBRC <> 0.
    message id SY-MSGID type SY-MSGTY number SY-MSGNO
    with SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call method CL_GUI_CFW=>FLUSH
    exceptions
      CNTL_SYSTEM_ERROR = 1
      CNTL_ERROR        = 2
      others            = 3.
if SY-SUBRC <> 0.
Error handling
endif.
concatenate lv_tmp '\' into folder_path.
But need to know in the lower versions like 3.1h and 4.0,

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

If the OS X 10.2 on the hard drive is/was bootable, try this -
Restart or boot, then immediately press the X key, keep it held down until you know the machine has started to boot using OS X. This is a hardware instruction to the Mac to boot using the first usable instance of OS X it finds.
Once booted to OS X, you should be able to move OS 9's System file into OS 9's System Folder.
Note - in general, unless you know for sure what you are doing and that the results are desired, do not relocate or rename files in OS 9's System Folder or in OS X's System or Library folders.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

Hello nmssns,
Thank you for contacting Apple Support Communities.
You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
About Apple ID security questions
http://support.apple.com/kb/HT5665
Regards,
Jeff D.

I have a MAC version 10.6.8, and I can't find icloud on the system preferencesnes

I have a MAC version 10.6.8, and I can't find icloud on the system preferences

In order to get iCloud you need 10.7.2.
Allan

Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

Check and Verify USMT IMG file before formatting the system

Similar Messages

Maybe you are looking for