Check box in a table view column

Hi,
I want to have a check box in a table (htmlb for java) for one column. In the table header when checked should automatically check all the check boxes in that column.
Also let me know how to read the column if it is checked or not.
Promise to reward you with points. Thanking u in advance.
Subu.

Hi ,
just add the following code in your jsp page---
for (int i = 1; i <= no_of_rows ; i++){
     for (int j = 1; j <= no_of_columns ; j++){
          if(i%2!=0){
mytableView.setStyleForCell(i , j, TableCellStyle.GROUP_LEVEL2);
else{
     mytableView.setStyleForCell(i , j, TableCellStyle.GROUP_LEVEL3);
as it is obvious,this code is to set different colors in alternative rows.
myTableView is the id of TableView.
Refer this link for different colors...
http://help.sap.com/saphelp_nw2004s/helpdata/en/26/f79241e9129f09e10000000a155106/frameset.htm---
Hope this helps.
Regards,
Swarna
Message was edited by: SwarnaDeepika

Similar Messages

How to insert check box value in table?

Hi all
kindly help me how to insert check box value in database. what code i have to use as i am new in programing.
thanx in advance

Hi,
There is no "Check box" in a table, a check box is a GUI (Graphical user interface) item.
What you want is to store a boolean value in a table. For that you can use the varchar2(1) datatype and store Y or N. (or anything else)
(you cannot define boolean as a datatype for a column).
If you're using a front-end application like apex then it might be useful for you to read the documentation about chekc boxes :
http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/check_box.htm#CHDDFBFH
(for the rest if it's Oracle Forms then everything is already said).
Edited by: user11268895 on Aug 17, 2010 10:44 AM

Check Box in a table

Hi
I have two tables each with 2 columns.First Column is a check box and the second column is Name field.Am getting User and group names from UME API into the name field of the first table.
Now if i check a single box and click on a button the selected check box value should be populated in the Name field of the Second table.
Similarly if i check multiple check boxes all the Names for the checked boxes should be populated in the Second table on click of a button.
Also on click of another button and selection of single checkbox in the second table the selected value (note not the check box value but the Name column value in the same row as the selected check box) should be removed from the second table.
Similarly multi selection of check boxes.
Any help immediately is highly appreciated.
Thanks in advance

Solved on my own !!!

Activating auto PO Check Box in the purchasing view for plant level.

Hi Techies,
Right now i have an issue related to auto PO check box in the purchasing view for the plant level. There are three plants A,B,C.. For the plants A and B the automatic PO check box is visible and the user is able to provide input values. But when it comes to plant C the auto PO field is not available and hence the user is unable to provide input for auto PO.
Is there any configuration to be done to activate the auto PO check box in the purchasing view in the material master with respect to plant C?
If so could you please guide me with the settings?
Thanking you in advance.
Regards,
Gopalakrishnan.S
Edited by: krishu100 on Jul 13, 2011 2:25 AM

Hi Techies thanks for you all info.
Now today i just tried to created a new HALB Material in the plant C which i had issues yesterday. But when i created today a new material the Auto PO feild is available for entry. THen i tried to go to the material which i created yesterday for editing it. But i was unable to do it.
I checked the transactions which most of you referred(Very Useful). I found that all the plant s had the same screen selction setting and set as Opt Entry. The field screen referrence for MM01, MM02 Transaction s are also set as opt entry. The screen reference for HALB is also set as Opt entry. Still i m not able to find the field auto PO in the purchasing field.
So does it mean that a material once created without auto PO enabled or visible can never be updated after that? But i think its not the case and we should be able to edit it(correct me if im wrong).
Really having my fingers crossed to find a solution for this issue.
Regards,
Gopalakrishnan.S

Calling a Breadcrumb image inside a Table view column

Hi
I want a sample code to call any bread crumb related image inside a table view column.
Please help with a code snippet.

I mean that, inside the iterator class of the tableView, write this code in the RENDER_CELL_START method.
method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
CASE p_column_key.
    WHEN 'ICON'.
p_replacement_bee = CL_HTMLB_IMAGE=>FACTORY(       id        = p_cell_id                              src      = '@3J@' ).
    ENDCASE.
Inside the method, GET_COLUMN_DEFINITIONS you need to append a column for icon, see the code below:
APPEND INITIAL LINE TO p_column_definitions ASSIGNING <def>.
    <def>-COLUMNNAME = 'ICON'.
    <def>-TITLE      = 'Display Icon'.
For more info you can refer to weblog on HTMLB TableView Iterator by Brian.
Hope I am clear.
Regards,
Ravikiran.C

Table view column cell Focusing while editing.

I have a table view with single column. I have defined custom cell factory for this column. When the table renders, a text value is shown for each cell in that column. When the user start editing the cells , then the contents of the cell changes and it shows 2 buttons, few check boxes and few radio buttons. Once the user selects his choice and clicks on a button inside the cell, the cell's editing is completed and cell's content is replaced with a plain text field.
Now while editing if the user clicks on any other cell, the current editing cell's cancel method is called and text field is show. However, if the user clicks mouse outside the table, the cell is still in editing state.
1) how to call the cancel editing method automatically here.
2) Also, if we try to associate with focus property, how to do it. i.e. on which component should I associate focused property since the cell now is replaced with a bunch of components.
3) If the user tries to use up or down arrow, then how to stop or start editing on the next cells.
Thanks.

Have you assigned an action to the CheckBox.onSelect event? If not, there is no server roundtrip triggered and the visibility is not updated.
I would create two context attributes "ColumnsVisible" (boolean) and calculated attribute "ColumnsVisibility" (Visibility), assign an empty action to the CheckBox.onSelect event, bind CheckBox.checked to "ColumnsVisible", TableColumn.visible to "ColumnsVisibility" and implement the calc. attribute getter as
WDVisibility getColumnsVisibility(...)
return element.getVisible() ? WDVisibility.VISIBLE : WDVisibility.NONE;
Armin

How to put check box in a table format at the out put ? Urgent issue...

Hi,
I am working an assignment to assign multiple roles for multiplr user.
In selection screen we have to enter mutiple EMPNO from ..to
1) in second screen we will get the empno, First name, last name, Position,
    From date, To date, Sap user ID, Email id in the table formate with first
    column with Check box.
2) In second screen below the table I have to place the multiple roles just like in
   the step loop format and below this one Execute button should be there.
If we select the multiple employees or single employee and place the multiple roles or single roles and if I click the execute button then the multiple roles will be assigned to the multiple employees. The empno and roles will come from table and step loop to internal table and the same will pass to the BDC.
For this requirement I prepered recording for Transaction PFCG. But I can't understand how to design the second screen that table format and the step loop format. Can anybody give any idea or any coding to design the second screen.
and how to meet the requirement. This is urgent issue. Good SDN points will be reworded.
Witing for kind response.
Thanks in advance.
Bansidhar

Hi upendra
There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
for(int i=0;i<wdContext.node<tablenode>()..size();i++)
if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
else
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
See the attribute is boolean so pass true or false as a values in setter methods.
Regards
Kalyan

How to Create Check Box in Dynamic Table

Hi Friends,
I've Created one Dynamic Table there i want to display 2 columns as Check Box.
How to Add this check box as column cell variant.
Looping the columns. In this One method SET_TABLE_CELL_EDITOR is ter. But i'm getting how to use this method. Kindly help in this Issue.
Regards,
jack.

Hi upendra
There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
for(int i=0;i<wdContext.node<tablenode>()..size();i++)
if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
else
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
See the attribute is boolean so pass true or false as a values in setter methods.
Regards
Kalyan

How to enable/disable check boxes in a table.

hi Gurus,
i am new to webdynpro for abap.
the problem i have is.
i have a table with two columns. first one is a check box column and the second one is a value field. the table is populated with data(second field only) upon pressing some button.
while populating data i want to make check box field/row ticked and disabled when second field row value is 'X' . if not leave the check box row/field enabled and unticked ( if i want i can tick the check box later). hope you guys me. this is sort of urgent. please reply with some code.
thanks in advance.
Sree

Hi
Issue what i am facing is,i want to display column of CHECKBOXes in my ALV.
for that i declare atrribute of type CHECKBOX.
And i write the following code.
lr_column_settings ?= l_value.
lt_columns = lr_column_settings->get_columns( ).
loop over table - in each loop another column can be modified
LOOP AT lt_columns INTO ls_column.
IF ls_column-id = 'CHK_BOX'.
CREATE OBJECT lr_chk_box
EXPORTING
checked_fieldname = ls_column-id.
lr_chk_box->set_read_only( ABAP_FALSE ).
lr_chk_box->set_read_only_fieldname( 'ALV_FINAL_STATUS' ).
ls_column-r_column->set_cell_editor( lr_chk_box ).
even i cant able to get checkbox in my ALV.
IT is displaying as general field.
Regards,
Ravi

How to add unique id to check box in a table

Hi Experts,
I have a static table in which more than 500 records appears in the table, so vertical scroll is displaying in the table. In each row, check boxes and text boxes displays with the data. When the check box is selected, I will do the calculation based on the selected check box and displays the calculated value to text control of respected row. To achieve this, I am triggering the event iterating the loop over the context to find which check box is selected. When the page gets refreshed, cursor moves to first record.
Since all the check boxes having the same id, I am not able to get from which check box this event has got triggered.
Is there a way to assign unique id to each check box so that I can assign parameter to the control and get from which check box event got triggered. I have tried to generate the table dynamically, even there I couldn't assign id to each check box.
Please through light on this request
Thanks
Murthy

It is not specific to any platform but common in all whether is CE or 7.0 follow the given procedure
1. Create a common onLeadSelect of table say it      selectedRow
2. Assign the same event in onToggle     selectedRow of checkbox.
3. Now loop it in such a way that
     if (wdContext.nodeAppinvoiceData().getLeadSelection() >= 0)
               wdContext.currentAppinvoiceDataElement().setIsPreviewSelected(true);
               if (wdContext.currentAppinvoiceDataElement().getIsSelected())
                    wdContext.currentAppinvoiceDataElement().setIsSelected(false);
                    for (int i = 0; i < wdContext.nodeAppinvoiceData().size(); i++)
                         boolean flag = wdContext.nodeAppinvoiceData().getAppinvoiceDataElementAt(i).getIsSelected();
                         if (flag)
                              break;
                         else
               else
                    wdContext.currentAppinvoiceDataElement().setIsSelected(true);
          wdContext.currentAppinvoiceDataElement().setIsPreviewSelected(false);
          wdContext.nodeAppinvoiceData().clearSelection();
          wdContext.nodeAppinvoiceData().setLeadSelection(-1);
BR
Satish Kumar

How to use check box in a table

i have a field in a internal table in which i have to put "X" if the user checks on a check box, for a particular row.
please provideme with the required code .
Thankyou.
Upendra

Hi upendra
There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
for(int i=0;i<wdContext.node<tablenode>()..size();i++)
if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
else
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
See the attribute is boolean so pass true or false as a values in setter methods.
Regards
Kalyan

Check box in a table not being read on auto read by JAWS(Screen Reader)

Hi Experts,
I am working on Accessible pages in ADF. Check box in table is not being read on "Auto Read" function by jaws. Auto read is a function that allows the user to start the screen reader at the top of the page and read the entire thing that is provided by JAWS. I have even specified label property for af:selectBooleanCheckbox. Can anyone help me regarding this issue.
Regards,
Santosh.
Edited by: 930871 on Jun 13, 2012 6:54 AM
Edited by: 930871 on Jun 13, 2012 7:25 AM

Can anyone help me on this issue. This is really urgent.

How to pass the check box values from one view to another view

Hi Experts,
I have a selection screen view which consists of check boxes.
WBS System status.
Release                      Completed                  Closed as 3 check boxes.
Note : The above ones are check boxes.
Based on the selection made by the user, those values needs to be passed to second view which retrieves the data and
displays the data accordingly.
At the same time if the user does not make any selection, then WBS System status should contain Released, Completed and Closed values and that needs to be sent to Second view.
Kindly advise.
Regards,
Chitrasen

hi ,
make a attribute of type WDY_BOOLEAN to achieve this functionality
u need to follow these steps :
1 in side ur component controller , under the ATTRIBUTES tab , make 3 attributes say attr1 , attr2 and attr3 of type WDY_BOOLEAN
2 create a context node , cn_check and 3 context attribute ca_check1 , ca_check2 and ca_check3 in ur first view for
release , complete and close check boxes
3 inside the DOINIT of ur 1st view , set the attributes attr1 , attr2 and attr3 to blank
wd_comp_controller->attr1 = ' '
wd_comp_controller->attr2 = ' '
wd_comp_controller->attr3 = ' '
4 inside the method , where u r validating , if the check boxes are checked or not , read the attributes ca_check1 , ca_check2 and
ca_check3
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
    DATA ls_cn_check TYPE wd_this->element_cn_check.
    DATA lv_ca_check1 LIKE ls_cn_check-ca_check1.
*   navigate from <CONTEXT> to <CN_CHECK> via lead selection
    lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
*   get element via lead selection
    lo_el_cn_check = lo_nd_cn_check->get_element( ).
*   get single attribute
    lo_el_cn_check->get_attribute(
      EXPORTING
        name = `CA_CHECK`
      IMPORTING
        value = lv_ca_check1 ).
IF lv_ca_check1 EQ 'X' .
wd_comp_controller->attr1 = ' X'
wd_comp_controller->attr2 = 'X '
wd_comp_controller->attr3 = ' X'

How to enable a check box using the table LVC_S_FCAT

hi,
I am working on reports. I have to have a check box and i am using the table LVC_S_FCAT to get the check box, i am getting the check box. how to enable it.

Hi Preethi,
try to set default the check-box with the
value '0', '1', '-', ' ' and 'X' (0/1 -> only display,
'-' field is not shown, ' ' and 'X' is normal)
and see the differences.
Hope it helps.
Regards, Dieter
Sorry, i thought you meen enable not editable.
Message was edited by: Dieter Gröhn

Check box in a table field

Hi experts ,
I have a requirement of having one of the table field as checkbox .when i kept it as checkbox it is not getting reflected in sm30 .i need to have a check box displayed in the field of the table in sm30 .

Hey i too came across this problem and i guess changing Screen could be a troublesome task.
Other option is:
First Regenerate that particular table.
TCODE: SE14 --> Enter table name --> Click on Activate and adjust database button.
If it wont works then last option is:
Delete the Table Maintenance generator for that particular table and again create it with same details, make sure you dont change anything while recreating it (even the screen number must be same).
Open table in (Change mode) --> Utilities --> Table maintenance generator --> Delete it and again create with same parameters.
This will surely work,
<REMOVED BY MODERATOR>
Regards Pankaj.
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 7:31 PM

Check box in a table view column

Similar Messages

Maybe you are looking for