Check box in OOps ALV

Hi All,
I have created my field catalogue using 'Field Catalogue Merge' Function Module passing a structure name to it. I want to further add a checkbox now... Please suggest an approach...
Thanks in advance.
Tanu

Hi Faisal,
Thanks for your response !
I need to add an extra checkbox (or button) for selecting rows. It is not any field of the structure passed in FieldCatalogue Merge Function. Its extra from all the fields of table.
The approach that came to me is -
************Field Catalogue Generation
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE' " Generate Field Catalog using this way and after getting change the Required one
EXPORTING
 i_structure_name = 'ztable'
CHANGING
 ct_fieldcat = it_fcat
EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
**************Add an extra checkbox field
CLEAR wa_fcat.
wa_fcat-fieldname = 'CHKBOX'.
wa_fcat-edit = 'X'.
wa_fcat-no_out = 'X'.
wa_fcat-tabname = 'G_TAB_ALVDIS'.
wa_fcat-outputlen = 7.
APPEND wa_fcat TO it_fcat.
*************Add this Checkbox field to layout
gs_layout-box_fname = 'CHKBOX'.
Display of ALV
IF g_tab_alvdis[] IS NOT INITIAL.
allow to select multiple lines
 CALL METHOD g_ref_grid->set_table_for_first_display
 EXPORTING
 is_layout = gs_layout
 CHANGING
 it_outtab = g_tab_alvdis
 it_fieldcatalog = g_tab_fldc
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 ENDIF.
Endif.
I need to confirm if I'm going right. This is how it has been done previously in one of the reports. But the difference was that fieldcatalogue was generated manually. But appending each of the fields separately.
Please do correct if anything is missing or need to be changed.
Thanks
Tanu

Similar Messages

Cell wise and row wise check box in oops alv

Normally column wise check box are possible in oops alv but how to possible check box in first row only in oops alv and Cell wise check box in oops alv?

Hi,
Try like changing this
insted of
g_layout-f2code = ' '.
use this
g_layout-f2code = 'DISP'. " Sets fcode for when double
and
g_layout-f2code = '&ETA'. " it will display POPUP screen
Best Regards
Ranga
Edited by: Ranga Swamy on Nov 1, 2008 11:07 PM
Edited by: Ranga Swamy on Nov 1, 2008 11:17 PM

How to add check box in the ALV list

dear Experts,
i have a requirement.
i want show the check boxes in my ALV list.
can u please give the solution.
thanks

TYPE-POOLS: slis.
*---internal tables
DATA: BEGIN OF it_flight OCCURS 0,
SEL, " add a single character field in the final output table
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight,
*--internal tables for alv
it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fcat LIKE LINE OF it_fieldcat,
layout TYPE slis_layout_alv,
it_sort type slis_t_sortinfo_alv,
wa_sort like line of it_sort.
DATA: BEGIN OF it_flight_sel OCCURS 0,
SEL,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight_sel.
data: wa_flight like it_flight.
In the layout set give the name of the field
whose checkbox will be created ( SEL as it has 1 char only )
layout-box_fieldname = 'SEL'.
*---start-of-selection .
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'IT_FLIGHT'
i_inclname = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
*----get data
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_flight
UP TO 20 ROWS.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
WHERE fieldname = 'SEATSOCC' .
wa_sort-fieldname = 'CARRID'.
wa_sort-group = 'UL'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
wa_sort-fieldname = 'CONNID'.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
is_layout = layout
it_fieldcat = it_fieldcat
it_sort = it_sort
TABLES
t_outtab = it_flight
EXCEPTIONS
program_error = 1.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
loop at it_flight into wa_flight.
if wa_flight-Sel EQ 'X'.
collecting records in table it_flight_sel to process further
append wa_flight to it_flight_sel.
clear wa_flight.
TYPE-POOLS: slis.
*---internal tables
DATA: BEGIN OF it_flight OCCURS 0,
SEL, " add a single character field in the final output table
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight,
*--internal tables for alv
it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fcat LIKE LINE OF it_fieldcat,
layout TYPE slis_layout_alv,
it_sort type slis_t_sortinfo_alv,
wa_sort like line of it_sort.
DATA: BEGIN OF it_flight_sel OCCURS 0,
SEL,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight_sel.
data: wa_flight like it_flight.
In the layout set give the name of the field
whose checkbox will be created ( SEL as it has 1 char only )
layout-box_fieldname = 'SEL'.
*---start-of-selection .
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'IT_FLIGHT'
i_inclname = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
*----get data
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_flight
UP TO 20 ROWS.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
WHERE fieldname = 'SEATSOCC' .
wa_sort-fieldname = 'CARRID'.
wa_sort-group = 'UL'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
wa_sort-fieldname = 'CONNID'.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
is_layout = layout
it_fieldcat = it_fieldcat
it_sort = it_sort
TABLES
t_outtab = it_flight
EXCEPTIONS
program_error = 1.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
loop at it_flight into wa_flight.
if wa_flight-Sel EQ 'X'.
collecting records in table it_flight_sel to process further
append wa_flight to it_flight_sel.
clear wa_flight.
Please follow the code.

Selection using check box in std ALV grid!

Hi all,
I have written a custom report to show the O/p in ALV grid.
This is my code:
TABLES :zpo_loi.
TYPE-POOLS : slis.
TYPE-POOLS: icon.
TABLES : sscrfields.
DATA : ls_composer TYPE ssfcompop,
 ls_control TYPE ssfctrlop.
DATA : wa_return TYPE TABLE OF bapiret2 ,
 wa_address TYPE bapiaddr3.
DATA : wa_crmd_orderadm_h TYPE zpo_loi,
 it_po TYPE TABLE OF crmd_orderadm_h,
 wa_po TYPE bbp_pds_header.
DATA : it_tab TYPE TABLE OF zpo_loi.
DATA : it_data TYPE TABLE OF crmd_orderadm_h,
 wa_data TYPE bbp_pds_header,
 et_data TYPE bbps_sf_po_output.
DATA : w_formname TYPE tdsfname ,
 w_sfname TYPE rs38l_fnam.
DATA :it_po_no TYPE TABLE OF select_be_obj_id,
 wa_it_po_no LIKE LINE OF it_po_no.
DATA :r_itab TYPE ddshretval OCCURS 0.
DATA : it_output LIKE TABLE OF zloi,
 wa_output TYPE zloi.
DATA : w_answer TYPE c.
DATA : g_repid LIKE sy-repid,
 g_title TYPE lvc_title,
 g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
 g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
 g_layout TYPE slis_layout_alv,
 g_print_alv TYPE slis_print_alv,
 g_variant LIKE disvariant,
 c_char_a(1) VALUE 'A',
 c_char_x(1) VALUE 'X',
 itab_alv_sort TYPE slis_t_sortinfo_alv,
 itab_alv_fcat TYPE slis_t_fieldcat_alv.
* Internal tables Begin with IT_ *
DATA : it_fcat TYPE slis_t_fieldcat_alv, "---ALV
 it_disp TYPE TABLE OF zloi.
* Work Area for Internal tables Begin with WA_ *
DATA : wa_fcat TYPE slis_fieldcat_alv , "---ALV
 wa_layout TYPE lvc_s_layo, "---ALV
 wa_it_disp LIKE LINE OF it_disp.
DATA : it_sf_po TYPE TABLE OF crmd_orderadm_h,
 wa_sf_po TYPE bbp_pds_header.
*SELECTION-SCREEN:
* BEGIN OF SCREEN 500 AS WINDOW TITLE title,
* END OF SCREEN 500.
*DATA : functxt TYPE smp_dyntxt.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS sel_po FOR zpo_loi-zobject_id.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : pr_loi RADIOBUTTON GROUP grp1 USER-COMMAND ucom,
 pr_fondo RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b2.
* At selection-screen output *
AT SELECTION-SCREEN OUTPUT.
IF pr_fondo = 'X'.
 REFRESH sel_po.
 LOOP AT SCREEN.
 IF screen-name = text-003 OR screen-name = text-004.
 screen-input = '0'.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSEIF pr_loi = 'X'.
 LOOP AT SCREEN.
 IF screen-name = text-003 OR screen-name = text-004.
 screen-input = '1'.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
* At selection-screen on radiobutton *
AT SELECTION-SCREEN ON RADIOBUTTON GROUP grp1.
IF pr_fondo = 'X'.
 REFRESH sel_po.
 LOOP AT SCREEN.
 IF screen-name = text-003 OR screen-name = text-004.
 screen-input = '0'.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSEIF pr_loi = 'X'.
 LOOP AT SCREEN.
 IF screen-name = text-003 OR screen-name = text-004.
 screen-input = '1'.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-low.
PERFORM populate_table.
PERFORM f4_help.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-high.
PERFORM populate_table.
PERFORM f4_help.
* At selection-screen *
AT SELECTION-SCREEN.
*---CHECKING THE INPUT >>>
IF sy-ucomm = 'ONLI'.
 PERFORM f002-check_input.
 PERFORM f001-check.
ENDIF.
*& Form POPULATE_TABLE
* text
* --> p1 text
* <-- p2 text
FORM populate_table .
SELECT zobject_id
 description
FROM zpo_loi
INTO CORRESPONDING FIELDS OF TABLE it_tab.
SORT it_tab BY zobject_id ASCENDING.
ENDFORM. " POPULATE_TABLE
*& Form F4_HELP
* text
* --> p1 text
* <-- p2 text
FORM f4_help .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 ddic_structure = ' '
 retfield = 'ZOBJECT_ID'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 dynprofield = 'A'
 value_org = 'S'
 TABLES
 value_tab = it_tab
 return_tab = r_itab.
ENDFORM. " F4_HELP
*& Form F001-CHECK
* text
* --> p1 text
* <-- p2 text
FORM f001-check .
IF pr_fondo = 'X'.
 PERFORM display_expiring_fondos.
ELSEIF pr_loi = 'X'.
 PERFORM fetch_po_det.
 PERFORM build_fcat.
 PERFORM alv_display.
ENDIF.
ENDFORM. " F001-CHECK
*& Form F002-CHECK_INPUT
* text
* --> p1 text
* <-- p2 text
FORM f002-check_input .
IF pr_loi = 'X'.
 REFRESH it_po.
 IF sel_po-low IS NOT INITIAL.
 SELECT object_id
 FROM crmd_orderadm_h
 INTO CORRESPONDING FIELDS OF TABLE it_po
 WHERE object_type = 'BUS2201'
 AND object_id = sel_po-low.
 IF sy-subrc NE 0.
 IF sel_po-high IS NOT INITIAL.
 SELECT object_id
 FROM crmd_orderadm_h
 INTO CORRESPONDING FIELDS OF TABLE it_po
 WHERE object_type = 'BUS2201'
 AND object_id = sel_po-high.
 IF sy-subrc NE 0.
 MESSAGE e009(zsrm).
 ENDIF.
 ENDIF.
 MESSAGE e007(zsrm).
 ENDIF.
 ELSE.
 MESSAGE e010(zsrm).
 ENDIF.
 IF sel_po-high IS NOT INITIAL.
 SELECT object_id
 FROM crmd_orderadm_h
 INTO CORRESPONDING FIELDS OF TABLE it_po
 WHERE object_type = 'BUS2201'
 AND object_id = sel_po-high.
 IF sy-subrc NE 0.
 MESSAGE e008(zsrm).
 ENDIF.
 ENDIF.
ENDIF.
ENDFORM. " F002-CHECK_INPUT
*& Form FETCH_PO_DET
* text
* --> p1 text
* <-- p2 text
FORM fetch_po_det .
REFRESH it_po.
it_po_no[] = sel_po[].
DATA : w_count TYPE i,
 w_lines TYPE c,
 wa_header TYPE bbp_pds_po_header_d.
REFRESH : it_po,it_output.
IF sel_po-high IS NOT INITIAL.
 SELECT object_id
 description
 posting_date
 created_by
 FROM crmd_orderadm_h
 INTO CORRESPONDING FIELDS OF TABLE it_po
 WHERE object_type = 'BUS2201'
 AND object_id BETWEEN sel_po-low AND sel_po-high.
ELSE.
 SELECT object_id
 description
 posting_date
 created_by
 FROM crmd_orderadm_h
 INTO CORRESPONDING FIELDS OF TABLE it_po
 WHERE object_type = 'BUS2201'
 AND object_id = sel_po-low.
ENDIF.
w_lines = sy-dbcnt.
w_count = 1.
DO.
 IF w_count LE w_lines.
 READ TABLE it_po INTO wa_po INDEX w_count.
 MOVE wa_po-object_id TO wa_output-zzpono.
 MOVE wa_po-description TO wa_output-zzpodesc.
 MOVE wa_po-posting_date TO wa_output-zzpodate.
 MOVE wa_po-created_by TO wa_output-zzpocreator.
 CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
 EXPORTING
 i_object_id = wa_output-zzpono
 IMPORTING
 e_header = wa_header.
 CALL FUNCTION 'BAPI_USER_GET_DETAIL'
 EXPORTING
 username = wa_output-zzpocreator
 IMPORTING
 address = wa_address
 TABLES
 return = wa_return.
 CLEAR wa_output-zzpocreator.
 CONCATENATE wa_address-firstname ' ' wa_address-lastname INTO wa_output-zzpocreator .
 MOVE wa_header-total_value TO wa_output-zzpoval.
 MOVE wa_header-currency TO wa_output-zzpocur.
 APPEND wa_output TO it_output.
 w_count = w_count + 1.
 ELSE.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM. " FETCH_PO_DET
*& Form BUILD_FCAT
* text
* --> p1 text
* <-- p2 text
FORM build_fcat .
g_repid = sy-repid.
g_title = 'Print LOI details'.
g_print_alv-no_print_listinfos = 'X'.
g_variant-report = sy-repid.
g_variant-variant = sy-title.
CLEAR g_layout.
g_layout-f2code = ' '.
wa_layout-zebra = 'X'.
g_layout-flexible_key = 'X'.
g_layout-colwidth_optimize = 'X'.
g_layout-detail_initial_lines = 'X'.
g_layout-box_fieldname = 'ZZCHECK'.
REFRESH it_fcat.
*Po no
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPONO' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_m = 'Purchase Order'.
*wa_fcat-seltext_s = 'Purchase Order.
wa_fcat-icon = 'X'.
wa_fcat-col_pos = '2'.
wa_fcat-outputlen = 10.
APPEND wa_fcat TO it_fcat.
*Description
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPODESC' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Description'.
wa_fcat-seltext_m = 'Description'.
*wa_fcat-seltext_s = 'Description'.
wa_fcat-col_pos = '3'.
wa_fcat-outputlen = 10.
APPEND wa_fcat TO it_fcat.
*Posting date
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPODATE' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_l = 'Posting Date'.
wa_fcat-seltext_m = 'Posting Date'.
*wa_fcat-seltext_s = 'Posting Date'.
wa_fcat-col_pos = '4'.
wa_fcat-outputlen = 8.
APPEND wa_fcat TO it_fcat.
*value
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOVAL' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO value'.
wa_fcat-seltext_m = 'PO value'.
*wa_fcat-seltext_s = 'PO value'.
wa_fcat-col_pos = '5'.
wa_fcat-outputlen = 15.
wa_fcat-no_zero = 'X'.
APPEND wa_fcat TO it_fcat.
*Currency
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOCUR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO Currency'.
wa_fcat-seltext_m = 'PO Currency'.
*wa_fcat-seltext_s = 'PO Currency'.
wa_fcat-col_pos = '6'.
wa_fcat-outputlen = 5.
APPEND wa_fcat TO it_fcat.
*Creator
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOCREATOR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Buyer'.
wa_fcat-seltext_m = 'Buyer'.
*wa_fcat-seltext_s = 'Buyer'.
wa_fcat-col_pos = '7'.
wa_fcat-outputlen = 12.
APPEND wa_fcat TO it_fcat.
ENDFORM. " BUILD_FCAT
*& Form ALV_DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM alv_display .
SORT it_output BY zzpono.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = g_repid
 i_callback_pf_status_set = g_set_pf_stat
 i_callback_user_command = g_user_command
 i_grid_title = g_title
 is_layout = g_layout
 it_fieldcat = it_fcat[]
 is_variant = g_variant
 is_print = g_print_alv
 TABLES
 t_outtab = it_output[]
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form user_command
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
DATA: gd_repid LIKE sy-repid, "Exists
ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
 CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
 IMPORTING
 e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
 CALL METHOD ref_grid->check_changed_data .
ENDIF.
rs_selfield-refresh = 'X'.
CASE r_ucomm.
 WHEN 'PRINTLOI'.
 PERFORM call_sf.
 WHEN 'BACK'.
 CALL SELECTION-SCREEN 1000.
 WHEN 'CANCEL'.
 CALL SELECTION-SCREEN 1000.
 WHEN 'EXIT'.
 CALL SELECTION-SCREEN 1000.
ENDCASE.
ENDFORM. "user_command
*& Form set_pf_status
* text
* -->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZALV' EXCLUDING rt_extab.
SET TITLEBAR 'ZALV'.
ENDFORM. "set_pf_status
*& Form CALL_SF
* text
* --> p1 text
* <-- p2 text
FORM call_sf .
REFRESH it_sf_po.
LOOP AT it_output INTO wa_output WHERE zzcheck = 'X'.
 wa_sf_po-object_id = wa_output-zzpono.
 APPEND wa_sf_po TO it_sf_po.
ENDLOOP.
w_formname = 'ZSR_EBP_DOCU_LETTEROFINTENT1'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = w_formname
 IMPORTING
 fm_name = w_sfname
 EXCEPTIONS
 no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
ls_composer-tdnewid = 'X'.
ls_control-no_dialog = 'X'.
LOOP AT it_sf_po INTO wa_sf_po.
 CALL FUNCTION w_sfname
 EXPORTING
 control_parameters = ls_control
 output_options = ls_composer
 wa_object = wa_sf_po
 EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
 IF sy-subrc <> 0.
 ENDIF.
ENDLOOP.
ENDFORM. " CALL_SF
*& Form DISPLAY_EXPIRING_FONDOS
* text
* --> p1 text
* <-- p2 text
FORM display_expiring_fondos .
SET PF-STATUS 'ZLOI'.
SET TITLEBAR 'ZLOI'.
TYPES : BEGIN OF ty_output1,
 guid TYPE bbp_guid,
 object_id TYPE crmt_object_id_db,
 description TYPE crmt_process_description,
 posting_date TYPE crmt_posting_date,
 zzfondo_dat TYPE zfondo_dat,
 created_by TYPE crmt_created_by,
 END OF ty_output1.
DATA : it_output1 TYPE TABLE OF ty_output1,
 wa_output1 TYPE ty_output1,
 w_lines,
 w_count,
 it_fondo TYPE TABLE OF zsr_fondo,
 it_temp_fondo TYPE TABLE OF zsr_fondo,
 wa_temp_fondo TYPE zsr_fondo,
 wa_fondo TYPE zsr_fondo,
 w_diff TYPE p,
 wa_header1 TYPE bbp_pds_po_header_d.
CONSTANTS : c_otype(8) VALUE 'BUS2201'.
REFRESH : it_output1,it_temp_fondo,it_fondo.
SELECT b~zzfondo_dat
 a~guid
 a~object_id
 a~description
 a~posting_date
 a~created_by
INTO CORRESPONDING FIELDS OF TABLE it_output1
FROM bbp_pdhsc AS b
LEFT OUTER JOIN crmd_orderadm_h AS a ON b~guid = a~guid
AND a~object_type = c_otype.
LOOP AT it_output1 INTO wa_output1.
 CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
 EXPORTING
 date1 = sy-datum
 date2 = wa_output1-zzfondo_dat
 IMPORTING
 datediff = w_diff
 EXCEPTIONS
 invalid_datetime = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 ENDIF.
 IF w_diff <= '7'.
 wa_temp_fondo-zzpono = wa_output1-object_id.
 APPEND wa_temp_fondo TO it_temp_fondo.
 ENDIF.
ENDLOOP.
*select the final entries for PO whose FONDO is expiring
DESCRIBE TABLE it_temp_fondo LINES w_lines.
w_count = 1.
DO.
 IF w_count LE w_lines.
 READ TABLE it_temp_fondo INTO wa_temp_fondo INDEX w_count.
 IF sy-subrc = 0.
 CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
 EXPORTING
 i_object_id = wa_temp_fondo-zzpono
 IMPORTING
 e_header = wa_header1.
 wa_fondo-zzpono = wa_temp_fondo-zzpono.
 wa_fondo-zzpodesc = wa_header1-description.
 wa_fondo-zzpodate = wa_header1-posting_date.
 wa_fondo-zzexpdate = wa_header1-zzfondo_dat.
 wa_fondo-zzpoval = wa_header1-total_value.
 wa_fondo-zzpocur = wa_header1-currency.
 wa_fondo-zzpocreator = wa_header1-created_by.
 CLEAR : wa_address.
 REFRESH wa_return.
 CALL FUNCTION 'BAPI_USER_GET_DETAIL'
 EXPORTING
 username = wa_header1-created_by
 IMPORTING
 address = wa_address
 TABLES
 return = wa_return.
 CLEAR wa_fondo-zzpocreator.
 CONCATENATE wa_address-firstname ' ' wa_address-lastname INTO wa_fondo-zzpocreator .
 w_count = w_count + 1.
 APPEND wa_fondo TO it_fondo.
 ENDIF.
 ELSE.
 EXIT.
 ENDIF.
ENDDO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_structure_name = 'ZSR_FONDO'
 i_grid_title = 'EXPIRING FONDOS'
 TABLES
 t_outtab = it_fondo[]
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM. " DISPLAY_EXPIRING_FONDOS
Now in my ALV grid o/p i can see the check box but if i select one row and then try to select another the first one gets deselected.
Can anybody tell me what is missing?

Hi,
Try like changing this
insted of
g_layout-f2code = ' '.
use this
g_layout-f2code = 'DISP'. " Sets fcode for when double
and
g_layout-f2code = '&ETA'. " it will display POPUP screen
Best Regards
Ranga
Edited by: Ranga Swamy on Nov 1, 2008 11:07 PM
Edited by: Ranga Swamy on Nov 1, 2008 11:17 PM

How to read the check box value in alv report

hi experts,
i m working on one alv report where i m using the check box for field selection in alv display.
but i don't know how to read the only selected fields.
wa_fieldcat-fieldname = 'BOX'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Box'.
wa_fieldcat-checkbox = 'X'.
wa_fieldcat-input = 'X'.
wa_fieldcat-edit = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AUFNR'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Sales Doc'.
wa_fieldcat-hotspot = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = v_repid
     I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     it_fieldcat                       = i_fieldcat[]
     i_save                            = 'A'
     it_events                         = v_events
    TABLES
      t_outtab                          = it_header
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
when '&RELEAS'.
endcase
endform.
i gone through some already posted que for same problem i tried options like
loop at it_header.
endloop.
but i m getting box field empty.
is there i missed something? plz sugeest.. if u have any other solution plz post...

Have this code in your user command fm:
* For capturing changed data
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = w_grid.
CALL METHOD w_grid->check_changed_data
    IMPORTING
      e_valid = w_valid.
IF w_valid = 'X'.
loop at itab where mark = 'X'.
endloop.
ENDIF.
Regards,
Ravi

How to handle check box click in ALV grid

Hi Experts,
I use ALV grid using FM.
I have list of delivery note items with one custom field as check-box. When I check the checkbox, all other lines related to the same delivery note should be automaticaly checked.
Is there any event or function code, where I can handle single click to checkbox?
Thanks&regards,
Jirka

HI
you can use following code in user command function .
DATA :BEGIN OF IT_MAINDATA OCCURS 0,
      MAINDATA(1),
      IT_RD1(1),
END OF IT_MAINDATA.
data: V_INDEX TYPE I.
DESCRIBE TABLE itab LINES LINE.
DO. " line times.
    READ LINE SY-INDEX FIELD VALUE Iitab-RD1.
    IF SY-SUBRC NE 0. EXIT. ENDIF.
    CHECK V_INDEX > 0.
    CHECK itab-RD1 = 'X'.
    MODIFY itab INDEX V_INDEX.
    IT_MAINDATA-IT_RD1 = Iitab-RD1.
ENDDO.
i think is work.
regards,
Abhi

How to capture check box click in ALV

Hi,
I have requirement in which after displaying the ALV out put, immediately when the check box is checked i need to capture it and proceed with further coding with that input.
Check box click is not getting captured in "USER COMMAND or LINE SELECTION"
Could you please suggest a way.
Regards
venkatesh.

Venkatesh,
If you are using cl_gui_alv_grid you need to register "change" event to catch the checkbox change.
you do so with this method of cl_gui_alv_grid class :
register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
event handler class
class lcl_event_receiver definition.
public section.
    methods:
    user_command for event user_command of cl_gui_alv_grid
    importing e_ucomm,                                      "#EC NEEDED
    data_changed for event data_changed of cl_gui_alv_grid
    importing er_data_changed e_onf4 e_onf4_before e_onf4_after e_ucomm,"#EC NEEDED
endclass.
global data
data: o_event_receiver      type ref to lcl_event_receiver.
data: goo_grid type ref to cl_gui_alv_grid.
At the displaying of your grid / register the change event and set handlers
goo_grid->register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
    set handler:
      o_event_receiver->user_command for goo_grid,
      o_event_receiver->data_changed for goo_grid.
hope this helps...
regards

How to handle the check box in the alv tree display

Hello,
in my ALV Tree Report i have a check box in the output.
I have one check box in the selection screen as select all .
if this is selected then all the check boxes in the output must be selected that is (X).
am using CL_GUI_ALV_TREE for this.
Please give me some input how to make that check boxes 'X' in the above mentioned case.
With Regards,
Sumodh.P

Sumodh,
check this
Re: Select all checkbox in ALV tree
please search before posting
Thanks
Bala Duvvuri

Creation of check boxes in the ALV report

Hi All,
 With all your support i'm gaining more knowledge, thank's for that,
in my ALV report i want to create a check boxes if the check boxs are elected and processed then the particular records is going to disappear,
How can we do this,
Thanks & Regards
Krishna

hi,
i have done this one.please check my code.
TYPE-POOLS : slis.
TYPES : BEGIN OF st_ekko,
 ebeln TYPE ekko-ebeln, "Purchasing Document Number
 bstyp TYPE ekko-bstyp, "Purchasing Document Category
 bsart TYPE ekko-bsart, "Purchasing Document Type
 aedat TYPE ekko-aedat, "record created on
 ernam TYPE ekko-ernam, "Person who Created the Object
 check(1),
 END OF st_ekko.
TYPES : BEGIN OF st_ekpo,
 ebeln TYPE ekko-ebeln,
 ebelp TYPE ekpo-ebelp, "Item Number of Purchasing Document
 ematn TYPE ekpo-ematn, "Material number
 matkl TYPE ekpo-matkl, "Material group
 netpr TYPE ekpo-netpr, "Net price in purchasing document
 END OF st_ekpo.
TYPES : BEGIN OF st_ebeln,
 ebeln TYPE ekpo-ebeln,
 END OF st_ebeln.
TYPES : BEGIN OF st_eine,
 ebeln TYPE ekko-ebeln,
 ekorg TYPE eine-ekorg,
 ekgrp TYPE eine-ekgrp,
 END OF st_eine.
TYPES : BEGIN OF st_check,
 check(1),
 END OF st_check.
DATA : it_ekpo TYPE STANDARD TABLE OF st_ekpo,
 it_ekko TYPE STANDARD TABLE OF st_ekko,
 wa_ekko LIKE LINE OF it_ekko,
 it_fieldcat TYPE slis_t_fieldcat_alv,
 wa_fieldcat LIKE LINE OF it_fieldcat,
 wa_layout TYPE slis_layout_alv,
 it_events TYPE slis_t_event,
 st_event LIKE LINE OF it_events,
 it_listheadr TYPE slis_t_listheader ,
 wa_listheadr LIKE LINE OF it_listheadr,
 st_printparams TYPE slis_print_alv,
 it_sortinfo TYPE slis_t_sortinfo_alv,
 wa_sortinfo LIKE LINE OF it_sortinfo,
 it_ekposortinfo TYPE slis_t_sortinfo_alv,
 wa_ekposortinfo LIKE LINE OF it_ekposortinfo,
 it_filter TYPE slis_t_filter_alv,
 it_ebeln TYPE STANDARD TABLE OF st_ebeln,
 it_eine TYPE STANDARD TABLE OF st_eine,
 wa_eine TYPE st_eine,
 it_popup TYPE STANDARD TABLE OF st_eine,
 wa_popup TYPE st_eine,
 it_check TYPE STANDARD TABLE OF st_check,
 wa_check TYPE st_check.
DATA : v_ebeln TYPE ekko-ebeln.
 SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE tit.
SELECT-OPTIONS: so_ebeln FOR v_ebeln OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b.
 INITIALIZATION
INITIALIZATION.
tit = text-000.
 AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON so_ebeln.
PERFORM validate_ebeln.
 START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_ekko_data.
PERFORM get_eine_data.
 END-OF-SELECTION
END-OF-SELECTION.
PERFORM populate_fieldcat1.
PERFORM populate_layout.
PERFORM get_eventlist.
PERFORM get_ekkosortinfo.
PERFORM ekkodisplay_onalv.
*& Form POPULATE_FIELDCAT1
FORM populate_fieldcat1.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_l = text-004.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'BSTYP'.
wa_fieldcat-seltext_l = text-005.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'BSART'.
wa_fieldcat-seltext_l = text-006.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-seltext_l = text-007.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-seltext_l = text-008.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. "POPULATE_FIELDCAT1
*& Form populate_fieldcat2
FORM populate_fieldcat2 .
CLEAR wa_fieldcat.
CLEAR it_fieldcat.
REFRESH it_fieldcat.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_l = text-004.
wa_fieldcat-hotspot = 'X'.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-seltext_l = text-009.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'EMATN'.
wa_fieldcat-seltext_l = text-010.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'MATKL'.
wa_fieldcat-seltext_l = text-011.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-seltext_l = text-012.
wa_fieldcat-datatype = 'CURR'. "Obligatory to perform SUM
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. "populate_fieldcat2
*& Form GET_EVENTLIST
FORM get_eventlist.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = it_events[]
 EXCEPTIONS
 list_type_wrong = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_events WITH KEY name = slis_ev_pf_status_set INTO st_event.
IF sy-subrc EQ 0.
 st_event-form = 'SET_PF_STATUS1'.
 APPEND st_event TO it_events.
 CLEAR st_event.
ENDIF.
READ TABLE it_events WITH KEY name = slis_ev_end_of_page INTO st_event.
IF sy-subrc EQ 0.
 st_event-form = 'END_OF_PAGE'.
 APPEND st_event TO it_events.
 CLEAR st_event.
ENDIF.
ENDFORM. "GET_EVENTLIST
*& Form ekpodisplay_onalv
FORM ekpodisplay_onalv .
IF it_ekpo[] IS INITIAL.
 MESSAGE 'NO DATA FOUND' TYPE 'I'.
ELSE.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'SET_PF_STATUS'
 i_callback_user_command = 'AT_USER_COMMAND1'
 i_callback_top_of_page = 'TOP_OF_PAGE'
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME = I_STRUCTURE_NAME
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE = I_GRID_TITLE
 I_GRID_SETTINGS = I_GRID_SETTINGS
 is_layout = wa_layout
 it_fieldcat = it_fieldcat
 IT_EXCLUDING = IT_EXCLUDING
 IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
 it_sort = it_ekposortinfo[]
 IT_FILTER = IT_FILTER
 IS_SEL_HIDE = IS_SEL_HIDE
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT = IS_VARIANT
 it_events = it_events
 IT_EVENT_EXIT = IT_EVENT_EXIT
 IS_PRINT = IS_PRINT
 IS_REPREP_ID = IS_REPREP_ID
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0
 I_HTML_HEIGHT_END = 0
 IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
 IT_HYPERLINK = IT_HYPERLINK
 IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
 IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
 IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
 E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
 ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
 TABLES
 t_outtab = it_ekpo
 EXCEPTIONS
 program_error = 1
 OTHERS = 2 .
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDIF.
ENDFORM. "ekpodisplay_onalv
*& Form SET_PF_STATUS1
FORM set_pf_status1 USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'MENU' excluding rt_extab. "Copy from SALV .
ENDFORM. "SET_PF_STATUS1
*& Form SET_PF_STATUS
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'STANDARD' excluding rt_extab. "Copy from SALV .
ENDFORM. "SET_PF_STATUS
*& Form AT_user_command
FORM at_user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CASE r_ucomm.
 WHEN '&IC1'.
 IF rs_selfield-fieldname EQ 'EBELN'.
 READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
 SELECT ebeln ebelp ematn matkl netpr
 FROM ekpo
 INTO TABLE it_ekpo
 WHERE ebeln EQ wa_ekko-ebeln.
 PERFORM populate_fieldcat2.
 PERFORM populate_layout2.
 PERFORM get_ekposortinfo.
 PERFORM ekpodisplay_onalv.
 ELSE.
 MESSAGE i020(z50871msg) WITH text-013.
 ENDIF.
 WHEN 'SE16'.
 CALL TRANSACTION 'SE16'.
 WHEN 'SE37'.
 CALL TRANSACTION 'SE37'.
 WHEN 'DISP'.
 PERFORM get_popupdata.
 PERFORM get_popupfcat.
 PERFORM display_popup.
ENDCASE.
ENDFORM. "AT_user_command
*& Form TOP_OF_PAGE
FORM top_of_page.
REFRESH it_listheadr.
wa_listheadr-typ = 'H'.
wa_listheadr-info = text-001.
APPEND wa_listheadr TO it_listheadr.
CLEAR wa_listheadr.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = it_listheadr[]
 i_logo = 'ENJOYSAP_LOGO'. "From OAER transaction
ENDFORM. "TOP_OF_PAGE
*& Form build_print_params
FORM build_print_params.
st_printparams-reserve_lines = '3'. "Lines reserved for footer
st_printparams-no_coverpage = 'X'.
ENDFORM. "build_print_params
*& Form end_of_page
FORM end_of_page.
REFRESH it_listheadr.
wa_listheadr-typ = 'H'.
wa_listheadr-info = sy-pagno.
APPEND wa_listheadr TO it_listheadr.
CLEAR wa_listheadr.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = it_listheadr[].
ENDFORM. "end_of_page
*& Form GET_EKPOSORTINFO
FORM get_ekposortinfo.
wa_ekposortinfo-up = 'X'.
wa_ekposortinfo-spos = 1.
wa_ekposortinfo-fieldname = 'EBELP'.
wa_ekposortinfo-tabname = 'EKPO'.
APPEND wa_ekposortinfo TO it_ekposortinfo.
CLEAR wa_ekposortinfo.
wa_ekposortinfo-up = 'X'.
wa_ekposortinfo-spos = 2.
wa_ekposortinfo-fieldname = 'EMATN'.
wa_ekposortinfo-tabname = 'EKPO'.
APPEND wa_ekposortinfo TO it_ekposortinfo.
CLEAR wa_ekposortinfo.
ENDFORM. "GET_EKPOSORTINFO
*& Form POPULATE_LAYOUT
FORM populate_layout.
wa_layout-colwidth_optimize = 'X'. "column width
wa_layout-zebra = 'X'.
wa_layout-no_hline = 'X'.
wa_layout-no_vline = 'X'.
wa_layout-cell_merge = 'X'.
wa_layout-box_fieldname = 'CHECK'.
wa_layout-box_tabname = 'IT_EKKO'.
wa_layout-window_titlebar = 'PURCHASE ORDER HEADER DETAILS'.
ENDFORM. "POPULATE_LAYOUT
*& Form get_EKKOsortinfo
FORM get_ekkosortinfo.
wa_sortinfo-up = 'X'.
wa_sortinfo-spos = 1.
wa_sortinfo-fieldname = 'EBELN'.
wa_sortinfo-tabname = 'EKKO'.
APPEND wa_sortinfo TO it_sortinfo.
CLEAR wa_sortinfo.
wa_sortinfo-up = 'X'.
wa_sortinfo-spos = 2.
wa_sortinfo-fieldname = 'BSTYP'.
wa_sortinfo-tabname = 'EKKO'.
APPEND wa_sortinfo TO it_sortinfo.
CLEAR wa_sortinfo.
wa_sortinfo-up = 'X'.
wa_sortinfo-spos = 3.
wa_sortinfo-fieldname = 'AEDAT'.
wa_sortinfo-tabname = 'EKKO'.
APPEND wa_sortinfo TO it_sortinfo.
CLEAR wa_sortinfo.
ENDFORM. "get_EKKOsortinfo
*& Form EKKODISPLAY_ONALV
FORM ekkodisplay_onalv.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'SET_PF_STATUS1'
 i_callback_user_command = 'AT_USER_COMMAND'
 is_layout = wa_layout
 it_fieldcat = it_fieldcat
 it_sort = it_sortinfo[]
 it_filter = it_filter
 it_events = it_events[]
 TABLES
 t_outtab = it_ekko[]
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "EKKODISPLAY_ONALV
*& Form validate_ebeln
FORM validate_ebeln.
SELECT ebeln
 FROM ekpo
 INTO TABLE it_ebeln
 WHERE ebeln IN so_ebeln.
IF sy-subrc NE 0.
 MESSAGE e020(z50871msg) WITH text-014.
ENDIF.
ENDFORM. "validate_ebeln
*& Form populate_layout2
FORM populate_layout2 .
CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'. "column width
wa_layout-zebra = 'X'.
wa_layout-no_hline = 'X'.
wa_layout-no_vline = 'X'.
wa_layout-cell_merge = 'X'.
wa_layout-window_titlebar = 'PURCHASE ORDER DETAILS SECOND SCREEN'.
ENDFORM. " populate_layout2
*& Form GET_POPUPDATA
FORM get_popupdata .
LOOP AT it_ekko INTO wa_ekko WHERE check = 'X'.
 READ TABLE it_eine INTO wa_eine WITH KEY ebeln = wa_ekko-ebeln.
 IF sy-subrc NE 0.
 MESSAGE i020(z50871msg) WITH text-015 wa_ekko-ebeln .
 ELSE.
 wa_popup-ebeln = wa_eine-ebeln.
 wa_popup-ekorg = wa_eine-ekorg.
 wa_popup-ekgrp = wa_eine-ekgrp.
 APPEND wa_popup TO it_popup.
 ENDIF.
ENDLOOP.
ENDFORM. " GET_POPUPDATA
*& Form GET_POPUPFCAT
FORM get_popupfcat .
CLEAR wa_fieldcat.
REFRESH it_fieldcat.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_l = text-004.
wa_fieldcat-hotspot = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'EKORG'.
wa_fieldcat-seltext_l = text-016.
APPEND wa_fieldcat TO it_fieldcat.
wa_fieldcat-fieldname = 'EKGRP'.
wa_fieldcat-seltext_l = text-017.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. " GET_POPUPFCAT
*& Form DISPLAY_POPUP
FORM display_popup .
LOOP AT it_ekko INTO wa_ekko WHERE check EQ 'X'.
 wa_check-check = wa_ekko-check.
 APPEND wa_check TO it_check.
ENDLOOP.
IF it_check[] IS INITIAL.
 MESSAGE i020(z50871msg) WITH text-018.
ENDIF.
IF NOT it_popup[] IS INITIAL.
 CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
 EXPORTING
 i_title = text-003
 i_allow_no_selection = 'X'
 i_scroll_to_sel_line = 'X'
 i_tabname = 'IT_POPUP'
 it_fieldcat = it_fieldcat
 i_callback_program = sy-repid
 TABLES
 t_outtab = it_popup
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDIF.
REFRESH it_check.
REFRESH it_popup.
ENDFORM. " DISPLAY_POPUP
*& Form get_ekko_data
FORM get_ekko_data .
SELECT ebeln bstyp bsart aedat ernam
 FROM ekko
 INTO CORRESPONDING FIELDS OF TABLE it_ekko
 WHERE ebeln IN so_ebeln.
IF sy-subrc NE 0.
 MESSAGE e020(z50871msg) WITH text-019.
ENDIF.
ENDFORM. " get_ekko_data
*& Form get_eine_data
FORM get_eine_data .
SELECT ebeln ekorg ekgrp
 FROM eine
 INTO TABLE it_eine
 WHERE ebeln IN so_ebeln.
ENDFORM. " get_eine_data
*& Form at_user_command1
FORM at_user_command1 USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
 CASE r_ucomm.
 WHEN 'SE16'.
 CALL TRANSACTION 'SE16'.
 WHEN 'SE37'.
 CALL TRANSACTION 'SE37'.
ENDCASE.
regards,
pavan t.

Regarding enabled check box's in alv grid display

hi ,
in alv output i have three fields i have enabled check boxes of this three field i want to display the out put of them
could u please explain clearly with code

Hi,
Go to Se38 --> Input BCALV_EDIT* and press F4. You can find many demo program with chekbox in ALV.
Thanks,
Sriram Ponna.

Check box color in alv grid

Hi friends,
My requirement is , i am displaying data in alv grid with check box,here i want when we select check box then that realated line should be appear in the Blue color,can any one support me , Thanku in advance

Hi danish,
Thanku for the reply,but i doesnt work ,can u observe this code and give me your suggestion eloborately.
gwa_fldcat-col_pos       = 2.
gwa_fldcat-fieldname     = 'CHK'.
gwa_fldcat-tabname       = 'GT_FINAL'.
gwa_fldcat-EMPHASIZE = 'C310'.
   gwa_fldcat-input        = 'X'.
gwa_fldcat-edit          = 'X'.
gwa_fldcat-checkbox      = 'X'.
gwa_fldcat-just          = 'C'.
gwa_fldcat-key           = 'X'.
gwa_fldcat-outputlen     = 16.
gwa_fldcat-seltext_l     = 'Selection'.
APPEND gwa_fldcat TO git_fldcat.
CLEAR gwa_fldcat.
FORM build_catalog .
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'CHK'.
gs_layout-info_fieldname = 'LINE_COLOR'.
gs_layout-box_fieldname     = 'CHK'.
gs_layout-box_tabname       = 'GT_FINAL-CHK'.
ENDFORM.                    " BUILD_CATALOG
*&      Form USER
FORM user USING lv_okcode   LIKE sy-ucomm
                       rs_selfield TYPE slis_selfield.
assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
CASE sy-ucomm.
handle the code execution based on the function code encountered
CASE lv_okcode.
loop at gt_final where chk = 'X'.
gt_final-line_color = 'C110' .
endloop.
    WHEN 'EXECUTE'.
      PERFORM execute.
    WHEN 'SELECTALL'.
      PERFORM selectall.
    WHEN 'DESELCTALL'.
      PERFORM deselectall.
    WHEN 'ASCENDING'.
      PERFORM ascending.
    WHEN 'DESCENDING'.
      PERFORM descending.
ENDCASE.
PERFORM alv.
ENDFORM.

Regard check box concept in alv grid display

HI Friends,
 i am displaying the sales order details with check box. so my first field is checkbox. When user click on check box then he press the details icon.
 my question i need a logic for calling the tcode based on the vbeln when it is cheked.
 thanks in advance.
Regards,
Purna.

hi,
go through this program
program bcalv_edit_05.
Purpose:
~~~~~~~~
This example shows how to use checkboxes within an ALV Grid Control.
You learn:
o how to define a column for editable checkboxes for an attribute
 of your list (see also remark below)
o how to evaluate the checked checkboxes
o how to switch between editable and non-editable checkboxes
Important Remark
~~~~~~~~~~~~~~~~
The checkbox functionality has been replaced by selection buttons
in front of each row (field SEL_MODE of the layout structure
set to 'A' or 'D'; when using the editable ALV Grid Control,
these selection buttons are always visible).
Class methods like GET_SELECTED_ROWS work only for this new
functionality and not for checkboxes.
Thus checkboxes should not be used for line selection but for
a column as an additional or for an already existing attribute
(like field SMOKER in SBOOK).
To check program behavior
~~~~~~~~~~~~~~~~~~~~~~~~~
Try out the functions displayed in the application toolbar:
o The first sets all checked lines to initial values.
(see form reset_selected_entries)
o The seconds marks all checkboxes that are input enabled
o The third unmarks all checkboxes that are input enabled
o To try the forth, you have to select a line first using
the selection buttons on the left.
The function deactivates/activates a checkbox.
Checkboxes may be locked/unlocked using a double click on the
checkbox cell.
Essential steps (search for '§')
~~~~~~~~~~~~~~~
This example focusses on two aspects of checkboxes in an
editable ALV Grid Control:
A How to integrate, set, reset and evaluate checkboxes
B What you must do to lock particular checkboxes against input
A) Integrate, set, reset and evaluate checkboxes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A1.Extend your output table by a checkbox field.
A2.Add an entry for the checkbox in the fieldcatalog
A3.Optionally, check checkboxes initially after selecting data.
A4.Before you (a)set, (b)reset, (c)(de)activate or
 (d)evaluate checkboxes, you must check the input cells.
B) Lock particular checkboxes against input
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
B1.Extend your output table by a field to dis- or enable
 cells for input.
B2.After selecting data,
 assign a style for each row of your checkbox column.
B3.Use the layout structure to aquaint additional field to ALV.
B4.Switch the style to dis- or enable a cell for input
class lcl_event_receiver definition deferred. "for event handling
data: ok_code like sy-ucomm,
 save_ok like sy-ucomm,
 g_container type scrfname value 'BCALV_GRID_DEMO_0100_CONT1',
 g_grid type ref to cl_gui_alv_grid,
 g_custom_container type ref to cl_gui_custom_container,
 g_event_receiver type ref to lcl_event_receiver,
 gt_fieldcat type lvc_t_fcat,
 gs_layout type lvc_s_layo,
 g_max type i value 100.
*§A1.Extend your output table by a checkbox field.
 If you do not want to lock sole checkboxes against input
 you do not need field 'celltab'.
types: begin of gs_outtab.
types: checkbox type c. "field for checkbox
§B1.Extend your output table by a field to dis- or enable
 cells for input.
types: celltab type lvc_t_styl. "field to switch editability
 include structure sflight.
types: end of gs_outtab.
data: gt_outtab type gs_outtab occurs 0 with header line.
LOCAL CLASSES
This local class only handles event DOUBLE_CLICK.
Wenn the user double clicks on a checkbox cell the status of
this cell is switched from editable to not editable and vice versa.
class lcl_event_receiver definition.
public section.
methods: catch_doubleclick
 for event double_click of cl_gui_alv_grid
 importing
 e_column
 es_row_no
 sender.
endclass.
class lcl_event_receiver implementation.
method catch_doubleclick.
data: ls_outtab type gs_outtab,
 ls_celltab type lvc_s_styl.
Function:
Switch between 'editable' and 'not editable' checkbox.
If the user clicked on another column there is
nothing to do.
if e_column-fieldname ne 'CHECKBOX'.
 exit.
endif.
read table gt_outtab into ls_outtab index es_row_no-row_id.
The loop is only needed if there are other columns that
use checkboxes. At this point the loop could be
replaced by a READ of the first line of CELLTAB.
 loop at ls_outtab-celltab into ls_celltab.
 if ls_celltab-fieldname eq 'CHECKBOX'.
§B4.Switch the style to dis- or enable a cell for input
 if ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
 ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
 else.
 ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
 endif.
 modify ls_outtab-celltab from ls_celltab.
 endif.
 endloop.
 modify gt_outtab from ls_outtab index es_row_no-row_id.
 call method sender->refresh_table_display.
endmethod.
endclass.
 MAIN *
end-of-selection.
call screen 100.
 MODULE PBO OUTPUT *
module pbo output.
set pf-status 'MAIN100'.
set titlebar 'MAIN100'.
if g_custom_container is initial.
 perform create_and_init_alv.
endif.
endmodule.
 MODULE PAI INPUT *
module pai input.
save_ok = ok_code.
clear ok_code.
case save_ok.
 when 'EXIT'.
 perform exit_program.
 when 'SELECT'.
 perform select_all_entries changing gt_outtab[].
 when 'DESELECT'.
 perform deselect_all_entries changing gt_outtab[].
 when 'RESET'.
 perform reset_selected_entries changing gt_outtab[].
 when 'SWITCH'.
 perform switch_activation changing gt_outtab[].
endcase.
endmodule.
 FORM EXIT_PROGRAM *
form exit_program.
leave program.
endform.
*& Form BUILD_FIELDCAT
 text
 <--P_GT_FIELDCAT text
form build_fieldcat changing pt_fieldcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
call function 'LVC_FIELDCATALOG_MERGE'
 exporting
 i_structure_name = 'SFLIGHT'
 changing
 ct_fieldcat = pt_fieldcat.
*§A2.Add an entry for the checkbox in the fieldcatalog
clear ls_fcat.
ls_fcat-fieldname = 'CHECKBOX'.
Essential: declare field as checkbox and
 mark it as editable field:
ls_fcat-checkbox = 'X'.
ls_fcat-edit = 'X'.
do not forget to provide texts for this extra field
ls_fcat-coltext = text-f01.
ls_fcat-tooltip = text-f02.
ls_fcat-seltext = text-f03.
optional: set column width
ls_fcat-outputlen = 10.
append ls_fcat to pt_fieldcat.
endform.
*& Form CREATE_AND_INIT_ALV
 text
 <--P_GT_OUTTAB text
 <--P_GT_FIELDCAT text
 <--P_GS_LAYOUT text
form create_and_init_alv.
data: lt_exclude type ui_functions.
create object g_custom_container
 exporting container_name = g_container.
create object g_grid
 exporting i_parent = g_custom_container.
perform build_fieldcat changing gt_fieldcat.
Exclude all edit functions in this example since we do not need them:
perform exclude_tb_functions changing lt_exclude.
perform build_data.
*§ B3.Use the layout structure to aquaint additional field to ALV.
gs_layout-stylefname = 'CELLTAB'.
call method g_grid->set_table_for_first_display
 exporting is_layout = gs_layout
 it_toolbar_excluding = lt_exclude
 changing it_fieldcatalog = gt_fieldcat
 it_outtab = gt_outtab[].
create object g_event_receiver.
set handler g_event_receiver->catch_doubleclick for g_grid.
Set editable cells to ready for input initially
call method g_grid->set_ready_for_input
 exporting
 i_ready_for_input = 1.
endform. "CREATE_AND_INIT_ALV
*& Form EXCLUDE_TB_FUNCTIONS
 text
 <--P_LT_EXCLUDE text
form exclude_tb_functions changing pt_exclude type ui_functions.
data ls_exclude type ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_cut.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
append ls_exclude to pt_exclude.
endform. " EXCLUDE_TB_FUNCTIONS
*& Form build_data
 text
--> p1 text
<-- p2 text
form build_data.
data: lt_sflight type table of sflight,
 ls_sflight type sflight,
 ls_celltab type lvc_s_styl,
 lt_celltab type lvc_t_styl,
 l_index type i.
select * from sflight into table lt_sflight up to g_max rows.
if sy-subrc ne 0.
generate own entries if db-table is empty so that this example
still works
 perform generate_entries changing lt_sflight.
endif.
*§A3.Optionally, check checkboxes initially after selecting data.
(Omitted in this example)
loop at lt_sflight into ls_sflight.
 move-corresponding ls_sflight to gt_outtab.
if gt_outtab-connid eq '400'.
 gt_outtab-checkbox = 'X'.
endif.
 append gt_outtab.
endloop.
§B2.After selecting data,
 assign a style for each row of your checkbox column.
Initially, set all checkbox cells editable.
ls_celltab-fieldname = 'CHECKBOX'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
loop at gt_outtab.
 l_index = sy-tabix.
 refresh lt_celltab.
 ls_celltab-fieldname = 'CHECKBOX'.
 ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
 insert ls_celltab into table lt_celltab.
 insert lines of lt_celltab into table gt_outtab-celltab.
 modify gt_outtab index l_index.
endloop.
endform. " build_data
*& Form generate_entries
 text
 <--P_LT_SLFIGHT text
form generate_entries changing pt_slfight type standard table.
This form is only needed for the case that there is no
data in database table SFLIGHT.
data: ls_sflight type sflight,
 l_month(2) type c,
 l_day(2) type c,
 l_date(8) type c.
ls_sflight-carrid = 'LH'.
ls_sflight-connid = '0400'.
ls_sflight-currency = 'DEM'.
ls_sflight-planetype = '747-400'.
ls_sflight-seatsmax = 660.
do 110 times.
 ls_sflight-price = sy-index * 100.
 ls_sflight-seatsocc = 660 - sy-index * 6.
 ls_sflight-paymentsum = ls_sflight-seatsocc * ls_sflight-price.
 l_month = sy-index / 10 + 1.
 do 2 times.
 l_day = l_month + sy-index * 2.
 l_date+0(4) = '2000'.
 l_date4(2) = l_month0(2).
 l_date6(2) = l_day0(2).
 ls_sflight-fldate = l_date.
 append ls_sflight to pt_slfight.
 enddo.
enddo.
endform. " generate_entries
*& Form select_all_entries
 text
 <--P_GT_OUTTAB text
form select_all_entries changing pt_outtab type standard table.
data: ls_outtab type gs_outtab.
data: l_valid type c,
 l_locked type c.
*§A4ad. Before you (a)set, reset or (d)evaluate checkboxes,
 you must check the input cells.
If all entries are ok, ALV transferes new values to the output
table which you then can modify.
call method g_grid->check_changed_data
 importing
 e_valid = l_valid.
if l_valid eq 'X'.
 loop at pt_outtab into ls_outtab.
 perform check_lock using ls_outtab
 changing l_locked.
 if l_locked is initial
 and not ls_outtab-checkbox eq '-'.
 ls_outtab-checkbox = 'X'.
 endif.
 modify pt_outtab from ls_outtab.
 endloop.
 call method g_grid->refresh_table_display.
endif.
endform. " select_all_entries
*& Form deselect_all_entries
 text
 <--P_GT_OUTTAB[] text
form deselect_all_entries changing pt_outtab type standard table.
data: ls_outtab type gs_outtab.
data: l_valid type c,
 l_locked type c.
*§A4ad. Before you (a)set, reset or (d)evaluate checkboxes,
 you must check the input cells.
If all entries are ok, ALV transferes new values to the output
table which you then can modify.
call method g_grid->check_changed_data
 importing
 e_valid = l_valid.
if l_valid eq 'X'.
 loop at pt_outtab into ls_outtab.
 perform check_lock using ls_outtab
 changing l_locked.
 if l_locked is initial
 and not ls_outtab-checkbox eq '-'.
 ls_outtab-checkbox = ' '.
 endif.
 modify pt_outtab from ls_outtab.
 endloop.
 call method g_grid->refresh_table_display.
endif.
endform. " deselect_all_entries
*& Form reset_selected_entries
 text
 <--P_GT_OUTTAB[] text
form reset_selected_entries changing pt_outtab type standard table.
data: ls_outtab type gs_outtab.
data: l_valid type c.
*§A4b. Before you set, (b)reset or evaluate checkboxes,
 you must check the input cells.
If all entries are ok, ALV transferes new values to the output
table which you then can modify.
call method g_grid->check_changed_data
 importing
 e_valid = l_valid.
if l_valid eq 'X'.
 loop at pt_outtab into ls_outtab.
 if not ls_outtab-checkbox is initial
 and not ls_outtab-checkbox eq '-'.
 clear ls_outtab.
 modify pt_outtab from ls_outtab.
 endif.
 endloop.
 call method g_grid->refresh_table_display.
endif.
endform. " reset_selected_entries
form switch_activation changing pt_outtab type standard table.
data: ls_outtab type gs_outtab.
data: l_valid type c,
 lt_row_no type lvc_t_roid with header line.
*§A4c. Before you set, reset, (c)(de)activate
 or evaluate checkboxes, you must check the input cells.
If all entries are ok, ALV transferes new values to the output
table which you then can modify.
call method g_grid->check_changed_data
 importing
 e_valid = l_valid.
if l_valid eq 'X'.
 call method g_grid->get_selected_rows
 importing
 et_row_no = lt_row_no[].
 loop at lt_row_no.
 read table pt_outtab into ls_outtab index lt_row_no-row_id.
 if ls_outtab-checkbox ne '-'.
 ls_outtab-checkbox = '-'.
 else.
 ls_outtab-checkbox = ' '.
 endif.
 modify pt_outtab from ls_outtab index lt_row_no-row_id.
 endloop.
 call method g_grid->refresh_table_display.
endif.
endform. " switch_activation
*& Form check_lock
 text
 -->P_LS_OUTTAB text
 <--P_L_LOCKED text
form check_lock using ps_outtab type gs_outtab
 changing p_locked.
data ls_celltab type lvc_s_styl.
loop at ps_outtab-celltab into ls_celltab.
 if ls_celltab-fieldname = 'CHECKBOX'.
 if ls_celltab-style eq cl_gui_alv_grid=>mc_style_disabled.
 p_locked = 'X'.
 else.
 p_locked = space.
 endif.
 endif.
endloop.
endform. " check_lock
Regards,
Sindhu

How to handle check box events in alv tree.

hi,
i am working in CL_GUI_COLUMN_TREE class.Also using Check box. Now i want to handle events for check box . I am new to ABAP Objects.
Pls expaline in detail or send code
thanks in advance,
senthil kumar.r

Hello Senthil
Have a look at the sample report
SAPCOLUMN_TREE_CONTROL_DEMO
. The crucial points are:
(1) Register the required events at the control
* define the events which will be passed to the backend
" checkbox change
event-eventid = CL_GUI_COLUMN_TREE=>EVENTID_checkbox_change.
event-appl_event = 'X'.
append event to events.
CALL METHOD G_TREE->SET_REGISTERED_EVENTS
 EXPORTING
 EVENTS = EVENTS
 EXCEPTIONS
 CNTL_ERROR = 1
 CNTL_SYSTEM_ERROR = 2
 ILLEGAL_EVENT_COMBINATION = 3.
IF SY-SUBRC <> 0.
 MESSAGE A000.
ENDIF.
(2) Set the event handler
assign event handlers in the application class to each desired event
SET HANDLER G_APPLICATION->HANDLE_CHECKBOX_CHANGE FOR g_tree.
(3) Define and implement event handler method
METHOD HANDLE_CHECKBOX_CHANGE.
 " this method handles the checkbox_change event of the tree
 " control instance
 " show the key of the node and the name of the item
 " of the clicked checkbox in a dynpro field
 G_EVENT = 'CHECKBOX_CHANGE'.
 G_NODE_KEY = NODE_KEY.
 G_ITEM_NAME = ITEM_NAME.
 CLEAR G_HEADER_NAME.
ENDMETHOD.
Regards
Uwe

Check box Handling in ALV Tree Control

Hi All,
I am implementing a scenario wherein which I need to get the checked items and process upon the user action. In the implementation I am not getting the checked values.
This is how I have implemented.
I have added a check box field in the Field catalog which is type c
* Item Layout for the Check box.
lwa_item_layout-fieldname = 'CHKBOX'.
lwa_item_layout-class = cl_gui_column_tree=>item_class_checkbox.
lwa_item_layout-editable = 'X'.
APPEND lwa_item_layout TO lt_item_layout.
After that I have tried to used this code to get the checked items.
 CALL METHOD tree1->get_checked_items
 IMPORTING
 et_checked_items = t_checked.
But I am not getting any values in the table.
Further I have tried to use the Event checkbox_change for the check box logic( I am not sure but I thought it is)
But the event is not triggering with this... Please Help me in this regard...

CLASS cl_toolbar_event_receiver DEFINITION.
 PUBLIC SECTION.
* DATA: checked TYPE c,
* fieldname TYPE lvc_fname,
* node_key TYPE lvc_nkey.
 METHODS: on_function_selected
 FOR EVENT function_selected OF cl_gui_toolbar
 IMPORTING fcode.
 METHODS: handle_check_box_change
 FOR EVENT checkbox_change OF cl_gui_alv_tree
 IMPORTING checked
 fieldname
 node_key.
ENDCLASS
Does this Implementation giving any problem for this?

How to process check box in classical ALV

Hi,
I have one requirement wherein I am using Reuse_ALV_GRID_DISPLAY..I have a checkbox as a field and I have a push button as UPDATE...
If I select the rows in the ALV list using checkbox and if i click the Update button, I have to continue processing based on the checked rows..how will i capture the rows which are selected in ALV list...
Thanks in Adavance,
Saranya.

Hi Saranya
Plz try the following logic.
" Display data on the screen
" Alternative to it u can display the data usign REUSE_ALV_LIST_DISPLAY
" FM as well
Data : len type i .
loop at itab. " contains data to b displayed
write : / a as checkbox,itab-<f1>,itab-<f2>,...........,itab-<fn>.
endloop.
describe table itab lines len.
at line-selection.
do len times.
 read line sy-index field value a itab-<f1>, itab-<f2>,...........,itab-<fn>.
 if a = 'X'.
 write : /5 itab-<f1>, itab-<f2>,...........,itab-<fn>.
 endif.
enddo.
Plz try this and revert in case of issues .
Regards
Pankaj

Check box in OOps ALV

Similar Messages

Maybe you are looking for