Check box in SAP Query selection screen

I want to keep 2 check box in SAP Query selection screen.
could you please tell me any one.
regards,
kumar

Hi Vijay,
If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
You can find the name of the generated program of the query when you execute the query.
Reward points if useful.
Regards,
Atish

Similar Messages

SQ01 - Include a check box on ABAP query Selection screen

Hi Experts,
For my Abap Query, on the selection screen i am planning to include a check box such that if i click on the check box then a field will be displayed in the resulting output . On the other hand if i do not check on i should not be able the field in the output.
Please tell me how do i do this.
Thanks
Venkata Pradeep.

In infoset, Extras code tab
Code section: At selection-screen output
Do something like below:
IF radiobutton1 = 'X'.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXXX'.         "XXX is the filed group name you want to hide., you have to                                                                  find out what is it.
               screen-input = '1'.
               screen-invisible = '0'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ELSE.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXX'.
               screen-input = '0'.
               screen-invisible = '1'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ENDIF.

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Call screen in SAP Query selection screen (SQ01)

Hi experts , in sq01 selection screen my requirement is: for one field when the user call F4 the small screen should be appear and when they fill
those 3 fields I should concatenate them and send it as a single field to query for process , the important thing is those 3 fields should be in '
one line beside each other , is there a way like call screen or ... in sq01 for this issue ??
the screen that should be appear is something like this

Hi,
I dont think that ALV double click can be handles via SAP query. One possibility is that you can modify the report program that SAP generates for the query. Change the program to handle the double click evet on the ALV grid and call transaction ME23n using the PO number on the line selected.
Regards
Ajith

BEx query selection screen takes long time to popup

Hi,
I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
I have run the statistics of the query and according to the statistics report the query takes a lot of time for the following component :
OLAP: Query Gen. 2681,312682
I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
Please advise how to proceed.
Thanks in advance,
Arash

Hi,
Please check the following notes which should be useful.
1387593 - Performance optimization for query change/generation
1416737 - Performance optimization for query change/generation(2)
1396485 - Performance optimization for query check/save
Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
1472915, 1506560) and repair/correct the different tables to optmize
the query definition tables.
Regards,
Amit

F4 search-help in infoset query selection-screen fields

Hi all,
I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
How can I do this?
I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
Can you help me? I never done this before, so I really don't have a guess.
Thanks in advance.
Beste regards,
Sónia Gonçalves

Hi all,
I have found thread that helped me a lot in this issue.
I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
Isn't it possible to include it in the "Report-specific selctions"?
Thanks in advance.
Best regards,
Sónia Gonçalves

Check Box in SAP Business Partner

Hello Everybody,
I'm working with BUPT and trying to place a check box in SAP Business Partner (Role: MKK).
Actually the Check box is delivered from SAP standard (Function Group: FSBP_05 and screen 0201) and I'm trying to custom it under Partnerdaten "BUP310". I have gone through the standard customizing procedure. Still the Check box field is not visible on the screen.
Can anybody please provide me a tip or any kind of Doku.
Thanks and Regards
Ravi

Hi Ravi, check this.
See these related SAP OSS Notes.
Note 675800 - Business partner enhancement SRM on maintenance screen
Other Related Notes
937838 - Customer fields on BBPMAININT: Dump on Vendor Data tab
821235 - Customer enhancement for maintaining BP causes errors
672960 - User-defined fields 2
494966 - Composite SAP Note for Easy Enhancement Workbench (EEW)
484597 - Customer enhancement of CRM applications
937838 Customer fields on BBPMAININT: Dump on Vendor Data tab
853818 DLA: Error messages in BBPMAININT not displayed
847618 DLA: IBU data not displayed 14.10.2005
821235 Customer enhancement for maintaining BP causes errors
cheers,
Hema.

Query Selection screen field validatoin

I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
How can this be achieved ?
I tried looking for exits but did not find a relevant one.
Thanks in advance.

Hello,
You need to write a routine in SMOD for selection screen validations.
It will come in i_step = 3. please refer foll code as example:
The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
DATA: LI_VAR like rrrangeexit,
       wa_t_var_range like LI_VAR,
       count type i value 0.
IF i_s_rkb1d-infocube EQ 'CUBE1' or
   i_s_rkb1d-infocube EQ 'CUBE2'.
Check whether only one of date variable is entered in variable screen.
IF I_STEP = 3.
    Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
      if wa_t_var_range-low > sy-datum.
        CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
          EXPORTING
            I_CLASS = 'RSBBS'
            I_TYPE   = 'E'
            I_NUMBER = '000'
            I_MSGV1 = 'Enter date less than or equal to current date'.
        raise again.
      endif.
ENDIF.
ENDIF.
Regards,
Shashank

Query Selection Screen does not appear in Web Analyzer

Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh Kumar

Dear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind

How to add check box in SAP B1 grid controls..

hi all,
Anyone know how to add check box in SAP grid control?
It will be great if you could show me some sample code.
thanks.
regards,
sohch

Hi Sohch,
1. First of all you should define the Column in a matrix as it_CHECK_BOX. Like
        oColumns = oMatrix.Columns
        oColumn = oColumns.Add("chk_YesNo", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
        oColumn.TitleObject.Caption = "YesNo"
        oColumn.Width = 60
        oColumn.Editable = True
2. Bind it with a DBDataSource as defined
        oColumn = oColumns.Item("chk_YesNo")
        oColumn.DataBind.Bind("UDTable", "U_YesNo")
3. Make Sure that the value that is being put into the Database is either 'Y' or 'N'.
Hope this Helps
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan

How to increase size of check box in sap script

Hi All,
I need to include check box in sap script. I included check box using insert>character->sap symbols. I cant able to view check box in print preview but i can able to get check box in print out.Size of check box printed in the paper is not having enough size. I need to increase size of the check box. Give me suggestion for increasing size of check box.
Regards,
Peranandam

Chk the link.
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm

Is it possible to rearrange the order of SAP STD Selection Screen?

Hi.
Is it possible to rearrange the order of SAP STD Selection Screen?
Example:
IW69 has Location data selection at bottom of screen.
Is it possible to move that to top of the selection screen?
We are on ECC6.0.
Thank you,
Brett.

Hello Brett
You may try to use GuiXT:
[Adjusting Transactions Using GuiXT|http://help.sap.com/saphelp_sm32/helpdata/en/89/91b9db194f11d5b3a30050dae02d7c/content.htm]
Regards
Uwe

Query Selection Screen restriction

Hello All,
In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show any data.
Can this be achieved? If yes how.
Regds,
Shashank

Hi,
You can try out, customer exit with I_STEP = 3.
using which a exception will be raised if user enters value for more than one variable.
Hope it helps......
Regards,
Umesh.

Putting a check box above column for selection in WD ALV

Hi,
Can anyone provide me a code snippet and help me how I can
provide a check box above column for selection in WD ALV.
Best Regards
Sid

Hi Sid,
As far as I know we cannot put checkboxes directly above the Column headers.
You can achieve this functionality in a round above method
You can create a group of checkboxes above your ALV table with names of columns to be selected beside each check box and proceed with your further processing.
Also If you are just looking at which columns you need to select to be shown on the
ALV output
data: lr_standard_functions type ref to if_salv_wd_std_functions.
lr_standard_functions ?= wd_this->r_table.
lr_standard_functions->set_column_selection_allowed( ' ' ).
Hope this is of some help.
Regards,
Ismail.
Edited by: Ismail Basha on Jan 23, 2008 1:47 PM
Edited by: Ismail Basha on Jan 24, 2008 3:23 AM

How to get System status Check Boxes into Query selection screen

Dear experts,
Pleas help in knowing how to get System status Check Boxes into quick view query (SQVI), selectionscreen.
Regards
Jogeswara Rao
Edited by: K Jogeswara Rao on Jul 6, 2010 7:26 PM

Problem solved through other Forum
(Checkboxes not possible, some alternative solution to my requirement found)

Check box in SAP Query selection screen

Similar Messages

Maybe you are looking for