Check box not appearing in SWNADMIN

Hi ALL,
I'm trying to made configuration in by executing TCODE SWNADMIN.
it is opening portal with administration info.
But i'm not able to find Check box in system while creating sechdules.
Pls suggest solution or relevant sap note for displaying check box.

Hello,
Perhaps you have to do the settings in Development and then transport them to QA.
Changes aren't usually allowed in a Quality system.
regards
Rick Bakker
Hanabi Technology

Similar Messages

Hightlight boxes not appearing in Captivate 7

Hi,
I have a slide with 3 highlight boxes inserted in Captivate 7.
When all the boxes start at the same time (on the timeline) they all appear in the generated video no problem.
But when I move 2 of the boxes down the timeline to start later, they then do not appear in the generated video.
I am using Windows 7.
Can anyone help!!??!
Thanks
K

Hi, cannot get on the forums (again), will try by mail.
Here is some 'literature' for you:
http://blog.lilybiri.com/question-question-slides-in-captivate
http://blog.lilybiri.com/question-question-slides-part-2
Do not delete or try to delete embedded objects on quiz/score slide or
you'll probably get in trouble. Embedded are those objects that have no
separate timeline on the slide. The Review Area is only used to mention
when a question has not be answered (totally) and on the score slide. As
for the Progress indicator: have a look at the Quiz Preferences. Under
Settings you can uncheck 'Show progress', and the text can be changed under
Default Labels.
I presented a BYOL session about Quizzes recently. And my training always
starts with the Quiz styles in the Object Style Manager, then go to the
Master slides and tweak what is necessary. Check the Quiz Preferences, I
just pointed to; only after those three actions insert question slides.
Lilybiri
2014-11-19 14:26 GMT+01:00 chickenopolisgirl <[email protected]>:
hightlight boxes not appearing in Captivate 7 created by
chickenopolisgirl <https://forums.adobe.com/people/chickenopolisgirl> in *Adobe
Captivate* - View the full discussion
<https://forums.adobe.com/message/6943714#6943714>

When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button. So I cannot set up backup.

When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons. It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders). Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud. Only iOS devices can back up to iCloud. On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

Text boxes not appearing - CAPTIVATE1.1

I have a number of delegates using Cap1.1 - on some machines
when recording screens, the automatic text boxes are not appearing
when the recording has finished. (the "text box" option is checked
on all PCs in the custom options settings)
I`m sure i`ve heard this could be something to do with Flash
players - I checked one of the machines that is facing the issue
and its using Flash 9.
any help would be great
cheers

Sorry, I only keep the current version and one version back
due to storage limitations. I would note that there are few things
more difficult than to suggest a correction for an "intermittent"
problem, but I'd have to say an intermittent problem
on a version that was replaced years ago would definitely
qualify as the most difficult of all.
That said, maybe we can offer some help if we knew what the
problem was. You don't really say, except that some text-captions
on some machines are not appearing. That is not really helpful in
troubleshooting.
What is being recorded - exactly?
Where is it being recorded from - Internet, local drive,
etc.?
What are the delegates (what's a delegate?) doing at the time
they expect, but are not getting, automatically-generated
text-captions?
I am relatively certain that the problem (if I understand
that part), has nothing at all to do with the Flash Player version
installed, but beyond that, I'm sorry that all I can offer is
questions instead of answers.
Welcome to the User-to-User forums, hardyandy. Hopefully you
can give us enough additional information that we can take a stab
at helping out.
.

Captivate 8, knowledge check radio buttons and check boxes not diplaying correctly in HTML5

Hello. I am working in Cp 8 on a pc (Win 7, 64-bit) and publishing in HTML5, SCORM 2004, 3rd ed. My issue is with knowledge checks. In preview they look fine, but when published, the radio buttons and check boxes are oversized and do not appear as they should. Additionally, the rollover highlight that covers the distracters is skewed and does not cover all the text in cases of long answer choices. When published as a SWF, there are no issues but project requirements are for HTML5 output only. Help?

Create an XML Schema (XSD) and define that as the default form schema. The form data will conforms to the order of fields defined in the XML schema.
Hope that helps.
Nith

Text Caption Box not appearing

HI All / Captivate 4 Experts:
I recently upgraded from Captivate 3 to 4. My text caption box is not appearing on certain slides. I do have a click box on them, however when I removed the click box and played the next 5 slides...the text caption box did not appear.
The slides that I have are meant for the user to click on certain areas with the instructions given to them on what and where to click.
Any ideas???
PLEASE HELP!! Thanks!
Jane

Hi there
I happened across a weird issue just last night that was resolved by choosing a different ActionScript version. I'm wondering if you can try this to see if there is a change in behavior.
Click Edit > Preferences > Project > Publish Settings and whatever it's set to AS2 or AS3, try the other option and see if it changes your outcome.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Save PDF File As dialog box not appearing

I am running Acrobat 8 Pro on Windows Server 2008. I'm having a problem with the Adobe PDF printer. When I attempt to print a document to this printer, the "Save PDF File As" dialog box does not appear. The dialog box does open, but it is either hidden behind the running application or is minimized. I have to click the icon on the taskbar to bring the window to focus. This problem only occurs the first time I attempt to print after logging onto the computer. On subsequent print jobs the dialog box shows up fine.

Is there a registry setting or anything that I can set to get rid of the 'Save Scanned File As' box.
No.

Report on Employees whose trips assigned check box not checked

Hi SAP Guru's,
We have a requirement wherein we have to generate a report having list of those employee's whose trip assigned check box is not checked in infotype 0017 (Travel Privileges) at the same time who are having trips created in their name. If you have any idea please share it with me.
Thanks,
Sudhakar.
Edited by: sudhakar k on Feb 7, 2011 8:09 PM

Hi Raynard,
I did not give this table PA0017 as this table did not have the value trip assigned (field TRVFL).
Hi Sudhakar,
Get a list of pernr for whom field TRVFL is blank from that table. Then for the derived pernr check in table PTRV_PERIO or PTRV_HEAD whether any trips are assigned.
You will get the desired result. You either create a customised report or pick the values from the table in the backend.
Trust this helps.
BR,
Raj

"Install Windows 7 or later version" check box not showing up in Boot Camp

I am following a Reddit guide to dual boot Windows 7 on my late-2011 MBP. I've done every step up to installing Windows 7, but there is no check box to "Install Windows 7 or later" in Boot Camp. I've tried several other resources but none mention this. There is a "Remove Windows 7 or later version" check box which has a description stating it can install a Windows partition as well, but when I select it and click to go ahead it only has a selection to remove a Windows partition. I hope I'm just having a brain **** here, because I've been at this for a minute and it's causing hair loss at 21. Haha.
Ohh, and here's the guide I'm following: http://sampower.ie/windows-7-on-mavericks-via-bootcamp-and-usb/

your mac seems to think you had installed windows before
do you have more than 1 partition on your drive, if so, boot camp assistant will not work
if not, restart your mac and do a pram reset
open disk utility and repair permissions twice
open bca and try again

Check boxes not retaining their correct value

Hello, I have a perplexing issue going on. I have a simple, two checkbox form for updating two values in my login table. The row type is enum('y','n') so naturally a check box is my preferred way to set the value. Even though the value in the table is set to 'y', the check box in the form is never checked. I check it, click the submit button, and the update occurs in the table but the check box remains unchecked on the form. My code for the form is below. Any idea what I'm missing here?
<form method="post" id="form4" action="<?php echo KT_escapeAttribute(KT_getFullUri()); ?>">
            <table cellpadding="4" cellspacing="0">
              <tr><td><input <?php if (!(strcmp(KT_escapeAttribute($row_rslogin['show_profile']),"y"))) {echo "checked";} ?> type="checkbox" name="show_profile" id="show_profile" value="y" /></td>
                <td><label for="show_profile">Show my profile to other myJoy members.</label></td>
              </tr>
              <tr>
              <td><input <?php if (!(strcmp(KT_escapeAttribute($row_rslogin['get_mail']),"y"))) {echo "checked";} ?> type="checkbox" name="myjoymail_optout" id="myjoymail_optout" value="y" /></td>
                <td><label for="myjoymail_optout">Send me myJoy email and notifications.</label></td>
              </tr>
              <tr>
                <td></td><td><input type="submit" name="KT_Update3" id="KT_Update3" value="Save Prefs" /></td>
              </tr>
            </table>
          </form>

Hi,
Well I took your code and changed it to:
<?php if (!(strcmp("y","y"))) {echo "checked";} ?>
Getting rid of the KT_escapeAttribute() and manually entered the y. It worked fine. And even with the KT_escapeAttribute() it will probably work fine. Have you doubled checked that the database is not storing a Captial Y or a 0 or 1? Your using varchar correct, not char?

"Make this recurring" check box not visible on Mobile

I have created and successfully used a Donation button for my 501c(3) business.It works great in browsers on laptop and desktop computers.However, the "Make this recurring" check box is not visible on IPhone, IPod, IPad, Android Pad, or Android phone. How can I enable recurring payments on mobile phones?The URL on these devices starts: https : // mobile . paypal . com / us / cgi-bin / webscr ? cmd=_express-checkout-mobile ... Thanks in advance

Louisey,
Welcome to the forums!!
a few questions first...
a, did your site work in MobileMe initially before you purchased your domain name?
b, does it still work if you type in your MobileMe URL rather than the purchased domain name?

Cisco Cius AnyConnect check box not getting enabled!

Folks,
Here we are evaluating the Cisco Cius, however, while trying to get the AnyConnect "check box" marked, it does not check it! Does anyone knows why? Anything specific done on CUCM? BTW, cucm 8.5.1. Any ideas?
Thanks,
Thiago Henriques

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Data grid view adding check box not able to check state

i have make window search a city name result show on data grid view and i have added the check box when i am checking the check box and other search of keyword that same row i am un checking the chek box when search it remain check how to making
it check for al type of keyword

i have make window search a city name result show on data grid view and i have added the check box when i am checking the check box and other search of keyword that same row i am un checking the chek box when search it remain check how
to making it check for al type of keyword
Hello,
It's not clear what the issue is, you could be more specific by sharing some screenshots and code.
In addition, it will be more clear if you could separate the description into multiple sentences.
Which control did you want to get help about? The checkbox or datagridview?
If it is checkbox, did you want to keep checked or keep it uncheck?
If it is datagridview, whether you are talking about checkbox column?
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Check boxes not responding correctly in form.

I've created a form in forms central. Then I used XI to edit more fields. I have 7 check boxes grouped together. They are required and have a min. of 1 and max of 7. They are allowed to check as many as they wish. But when they hit the submission of the form it is allowing it to be submitted with those boxes left empty. What else can I do?

This is probably due to the following user preference: Acrobat > Preferences > Page Display > Rendering > Enhance thin lines
You should deselect it.

Check boxes not working ... any suggestions

I have a user that is having problems checking any check boxes within CRM. Their workstation was recently upgraded to Windows 7 with IE8. does anybody know of any setting which might prevent the clicking on the checkbox to work ? I can log in with their id and it works fine from an XP and IE7 machine.

One additional setting that I found that needed to be checked in the Internet Options is the "Display Mixed Content" option. We have some embedded reports and web pages within CRMOD and in order to suppress a warning box, we needed to changed the setting from "Prompt" to "Enable". If you're embedding other content within your instance, that might be of use to you.

Check box not appearing in SWNADMIN

Similar Messages

Maybe you are looking for