Check box prompt
Hi all,
I have a generated form with a check box in a multi record block, the prompt is placed above: this is ok.
Now, I want to place a button below, so I created an item group in which I put all the displayed fields except the button. The item group has layout format Multi-record. Now the button is displayed once below the item group which is the way I want it, the problem is that the prompt of the check box is placed besides the check box instead of above. The CBXALM preference of the block is set to "Y".
I am using designer 6.5.52.1.0
Any ideas?
Steven
Well, found this on Metalink
fact: Oracle Designer 6.0
fact: Oracle Designer 2.1.2
fact: CASEOFG - Forms Generator
symptom: Unable to center checkbox prompt above a multi record block
symptom: Checkbox prompts are not centered even though the value of both
the following preferences is set to 'CENTER':
ITMPJR (Prompt justification above a right-justified item)
ITMPJL (Prompt justification above a left-justified item)
cause: This behavior is described in <BUG:1147085>:CHECKBOX PROMPT NOT
CENTERED IN SPREAD TABLE
The problem occurs when the width of the check box item is set to a
value higher than 3. The position of the prompt is centered
relative to the space reserved for the check box. The space reserved
for the check box is the specified width. Since the real width of the
checkbox is 2, the alignment of the prompt is not centered relative
to the occupied width of the check box.
fix:
Workaround:
Nullify the check box item 'Width' property or set the width of
the check box item to 2 or 3.
When I read this I simply changed the width of the checkbox items to NULL.
It works fine ! You don't need to set any generator prefs to achieve this.
Cheers,
Coen
Similar Messages
-
About Check box Prompt in OBIEE 11g
Hi All,
I really wonder about strange behaviour of check box prompt in OBIEE11g.
I have created a check box prompt and associate it with my report. Now when i tried to view result with select any of check box, report run properly, But when i deselect check box and re run report, the check box automatically select again and result of report filtered.
Any one have any Idea about this, as this seems a BUG in OBIEE11g...
Many Thanks.Hi Archie,
Are you saying, when you deselect a prompt and try to run the report, it still selects the prompts from the first selection and filters the same again?
-Amith. -
Can I put check box prompt on the left side of box?
Thanks.
Yes but you have to delete the label and use the prompt property instead. Once you have specified a prompt set the Attachment Edge to Start.
-
Preventing disabling of check box - item okay in MIGO
Dear all,
In the MIGO transaction - during goods receipt for subcontractor material, when the item (incoming) is checked as item okay - automatically the child material (Material sent to subcontractor) is also activated thereby to enable 543 movement.
Unfortunately some of the users are disabling the check box (for the material sent to the subcontractor). This prevents depletion of stock from the subcontractor but inflates the stock of the incoming material.
Is there any way - either by authorisation check to prevent users disabling the check box or other methods?
Experts suggestion is required in this regard.
Thanks in advance.
Regards,
M.MHi Magesh,
it is possible. use Badi enhancement
MB_MIGO_BADI goto
IF_EX_MB_MIGO_BADI~POST_DOCUMENT
tell your abaper to put the logic like
parent ID and subcomponent ID need to select
if either of two is not selected
then error message will prompt not to save the GR doc since subcomponent is unselected.
reference field EKPO check PSTYP
hope this help you.
regards,
Maia
Edited by: Maia on Apr 18, 2008 3:07 PM -
How to validate and pass a value stored in the Check box to a SQL report
I have a menu(parameter form) with select lists and two check boxes(one option for DD/MM/YY(called CHK_BOX_MTH) and other for Quarter(Called CHK_BOX_QTR)).
If the user selects the check box for month, he should be only be able to select list of values for Month, Day and Year. The user should not be able to choose Quarter(or should be prompted with a message, "Check only one option"). Similarly if Quarter is chosen, DD/MM/YY should be disallowed.
How do I code this validation in HTML DB and where would it reside on the item?
How do I then pass these parameters(Checked box value) using a URL to another page as input?
The query expects the following
SELECT ... FROM DIM_DAY
WHERE
(:CHK_BOX_MTH IS NOT NULL AND START_DATE = ":SELECTED_DATE")
OR
(:CHK_BOX_QTR IS NOT NULL AND QTR = ":SELECTED_QTR");Vikas ,Thank you for your reply.
The only reason I am not able to use the radio group because I am not able to place the items shown adjacent to Month in the page. The From Date and To date (user enterable fields) should appear to the right of the Month radio button and quarter item to the right of the quarter radio button.
From Date : "Month" "Day" "Year" (should be displayed to the right of Month )
End Date : "Month" "Day" "Year" (should be displayed to the bottom right of
Month and above the Quarter line)
I hope I am making sense. -
I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!
cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway. -
Hi All,
iam Using ALV BLOCK list to print the output along with check boxes, iam able to print the output along with the check boxes but when i select any of the check box and click button on application tool bar it is going to dump and saying,
FIELD SYMBOL HAS NOT YET BEEN ASSIGNED.
i populated layout with following fields.
w_layout-box_fieldname = 'BOX'.
w_layout-box_tabname = 'T_FINAL2'.
Plz Help me out.
Thanks in Advance.
Neha*& Report BCALV_TEST_BLOCK_LIST
report bcalv_test_block_list.
types: g_ty_t_carrid type standard table of alv_tab,
g_ty_t_connid type standard table of alv_chck,
g_ty_t_curr type standard table of alv_cur,
g_ty_s_sflight type alv_t_t2,
g_ty_s_carrid type alv_tab,
g_ty_s_connid type alv_chck,
g_ty_s_curr type alv_cur.
constants: con_sflight type lvc_fname value 'ALV_T_T2',
con_scarr type lvc_fname value 'ALV_TAB',
con_spfli type lvc_fname value 'ALV_CHCK',
con_scurx type lvc_fname value 'ALV_CUR',
con_event_01 type lvc_fname value 'PF_STATUS_SET',
con_event_02 type lvc_fname value 'USER_COMMAND',
con_event_03 type lvc_fname value 'CALLER_EXIT',
con_event_04 type lvc_fname value 'LIST_MODIFY',
con_event_05 type lvc_fname value 'BEFORE_LINE_OUTPUT',
con_event_06 type lvc_fname value 'AFTER_LINE_OUTPUT',
con_event_07 type lvc_fname value 'SUBTOTAL_TEXT',
con_event_08 type lvc_fname value 'REPREP_MODIFY',
con_event_09 type lvc_fname value 'TOP_OF_PAGE',
con_event_10 type lvc_fname value 'END_OF_PAGE',
con_event_11 type lvc_fname value 'TOP_OF_LIST',
con_event_12 type lvc_fname value 'END_OF_LIST',
con_event_13 type lvc_fname value 'TOP_OF_COVERPAGE',
con_event_14 type lvc_fname value 'END_OF_COVERPAGE',
con_event_15 type lvc_fname value 'TOP_OF_FOREIGN_PAGE',
con_event_16 type lvc_fname value 'END_OF_FOREIGN_PAGE',
con_event_17 type lvc_fname value 'GROUPLEVEL_CHANGE'.
DATA *
tables: sscrfields. " for processing the FCODEs in Selektion screens
include <icon>.
include <symbol>.
type-pools: slis, kkblo.
types: g_ty_t_icon type standard table of icon,
g_ty_t_icont type standard table of icont,
begin of g_ty_s_plane,
carrid type g_ty_s_sflight-carrid,
connid type g_ty_s_sflight-connid,
planetype type g_ty_s_sflight-planetype,
seatsmax type g_ty_s_sflight-seatsmax,
end of g_ty_s_plane,
g_ty_t_plane type sorted table of g_ty_s_plane
with unique key carrid connid,
begin of g_ty_s_fcat_curr,
fieldname type lvc_fname,
cfieldname type lvc_fname,
currency type lvc_s_fcat-currency,
end of g_ty_s_fcat_curr,
g_ty_t_fcat_curr type sorted table of g_ty_s_fcat_curr
with unique key fieldname,
begin of g_ty_s_sort.
include type slis_sortinfo_alv.
types: end of g_ty_s_sort,
g_ty_t_sort type sorted table of g_ty_s_sort
with unique key spos fieldname,
begin of g_ty_s_test,
list_amount type num1,
select_amount type i,
only_db_info type char1,
db_short type char1,
excp_display type char1,
excp_condense type char1,
layo_title type lvc_s_layo-grid_title,
layo_zebra type char1,
layo_no_vert_lines type char1,
layo_no_horiz_lines type char1,
layo_cell_merge type char1,
layo_count type char1,
layo_box type char1,
layo_no_colhead type char1,
layo_column_optimize type char1,
layo_keys_hotspot type char1,
layo_no_keyfix type char1,
layo_no_hotspot type char1,
layo_hotspot_rows type i occurs 0,
layo_hotspot_columns type lvc_fname occurs 0,
layo_no_scrolling type char1,
layo_no_authcheck type char1,
layo_no_min_linesize type char1,
layo_min_linesize type sylinsz,
layo_max_linesize type sylinsz,
layo_group_change_edit type char1,
layo_get_selinfo type char1,
layo_confirmation_prompt type char1,
layo_f2code type syucomm,
layo_reprep type char1,
sum_before type char1,
sum_no_sumline type char1,
sum_no_sumchoice type char1,
sum_numc type char1,
sum_no_unitsplit type char1,
sum_totals_only type char1,
sum_totals_text type symsgli,
sum_no_subtotals type char1,
sum_no_subchoice type char1,
sum_subtotals_text type symsgli,
prnt_print type char1,
prnt_reserve_lines type lvc_s_prnt-reservelns,
prnt_no_listinfo type char1,
prnt_no_selinfo type char1,
prnt_with_title type char1,
prnt_footline type lvc_s_prnt-footline,
prnt_printinfo type char1,
prnt_no_coverpage type char1,
prnt_no_new_page type char1,
prnt_no_change_print_params type char1,
color_rows type i occurs 0,
color_fields_column type lvc_fname occurs 0,
color_fields_cell type lvc_fname occurs 0,
fcat_no_out_fields type lvc_fname occurs 0,
fcat_tech_fields type lvc_fname occurs 0,
fcat_fix_column_fields type lvc_fname occurs 0,
fcat_do_sum_fields type lvc_fname occurs 0,
fcat_no_sum_fields type lvc_fname occurs 0,
fcat_curr_fields type g_ty_t_fcat_curr,
curr_amount type i,
curr_space type char1,
t_sort type g_ty_t_sort,
no_info_popup type char1,
info_popup_once type char1,
events_info_popup type lvc_fname occurs 0,
events type lvc_fname occurs 0,
buffer_active type char1,
bypassing_buffer type char1,
end of g_ty_s_test,
begin of g_ty_s_outtab.
include type g_ty_s_sflight.
types: list type num1,
box type char1,
count type i,
lights type char1,
checkbox type char1,
hotspot type char1,
color(4) type c,
tabcolor type slis_t_specialcol_alv,
price2 type g_ty_s_sflight-price,
currency2 type g_ty_s_sflight-currency,
char(10) type c,
string type string,
int1 type int1,
int2 type int2,
int4 type int4,
numc(10) type n,
dec(10) type p decimals 2,
fltp type f,
dats type d,
tims type t,
icon type icon-id,
icon_qinfo type icon-name,
symbol type icon-id,
end of g_ty_s_outtab,
g_ty_t_outtab type table of g_ty_s_outtab.
constants: con_true type char1 value 'X',
con_ok type sy-ucomm value 'OK',
con_exit type sy-ucomm value 'EXIT',
con_canc type sy-ucomm value 'CANC',
con_back type sy-ucomm value 'BACK'.
data: gt_outtab1 type g_ty_t_outtab,
gt_outtab2 type g_ty_t_outtab,
gt_outtab3 type g_ty_t_outtab,
gt_outtab4 type g_ty_t_outtab,
gt_outtab5 type g_ty_t_outtab,
gt_outtab6 type g_ty_t_outtab,
gt_outtab7 type g_ty_t_outtab,
gt_outtab8 type g_ty_t_outtab,
gt_outtab9 type g_ty_t_outtab.
data: gt_outtab type g_ty_t_outtab with header line,
gs_test type g_ty_s_test.
data: g_repid type sy-repid.
data: g_field type lvc_s_fcat-fieldname,
g_int_field type i.
CLASS random DEFINITION
class random definition.
public section.
types:
value(16) type p decimals 0,
numcv(15) type n.
constants:
max type random=>value value 4294967295.
class-methods:
computes a random natural number from the set {0, ..., random=>max}.
number returning value(rval) type random=>value,
computes a random character from the set {A-Za-z0-9}
c returning value(rval) type char01,
computes a random string consisting of "len" random characters
string importing len type i
returning value(rval) type string,
computes a date
dats returning value(rval) type d,
computes a time
time returning value(rval) type t,
computes a random numc from the set {low, ..., high}
numc importing low type random=>numcv high type random=>numcv
returning value(rval) type random=>numcv,
computes a random integer from the set {low, ..., high}
i importing low type i high type i
returning value(rval) type i,
computes a random integer from the set {low, ..., high}
int2 importing low type int2 high type int2
returning value(rval) type int2,
computes a random integer from the set {low, ..., high}
int1 importing low type int1 high type int1
returning value(rval) type int1,
computes a random float from the interval [low ; high]
f importing low type f high type f
returning value(rval) type f,
computes a random character from the set {A-F0-9}
hex returning value(rval) type char01,
computes a random character from the set {0-1}
x returning value(rval) type char01,
method "random=>class_constructor"
class_constructor.
private section.
class-data:
precomputed maximal index (= string length - 1) of "random=>chars"
or of "random=>x_data".
charsmax type i,
xmax type i,
random number seed value.
(Used in method "random=>number".)
seed type random=>value.
constants:
characters for class-method "random=>hex"
hex_data(100) type c value 'ABCDEF' &
'0123456789',
characters for class-method "random=>x"
x_data(100) type c value '01',
characters for class-metshod "random=>c"
chars(100) type c value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' &
'abcdefghijklmnopqrstuvwxyz' &
'0123456789'.
endclass. "random DEFINITION
CLASS random IMPLEMENTATION
class random implementation.
implementation of the methods for randomizing the values
method x.
data: ri type i.
ri = random=>i( low = 0 high = random=>xmax ).
move x_data+ri(1) to rval.
endmethod. "x
method hex.
data: ri type i.
ri = random=>i( low = 0 high = random=>charsmax ).
move hex_data+ri(1) to rval.
endmethod. "hex
method number.
constants:
a(3) type p value 67301, " Coefficient
c(1) type p value 1, " Increment
m(6) type p value 4294967296. " Modulus 2**32
random=>seed = ( a * random=>seed + c ) mod m.
rval = random=>seed.
endmethod. "number
method c.
data:
ri type i.
ri = random=>i( low = 0 high = random=>charsmax ).
move chars+ri(1) to rval.
endmethod. "c
method string.
data:
char(1) type c.
clear rval.
do len times.
char = random=>c( ).
concatenate rval char into rval.
enddo.
endmethod. "string
method dats.
data: l_date type sy-datum,
l_day(2) type n,
l_month(2) type n,
l_year(4) type n,
l_value type random=>numcv,
l_low type random=>numcv,
l_high type random=>numcv.
l_year = sy-datum+0(4).
l_low = l_year - 5.
l_high = l_year + 5.
l_value = random=>numc( low = l_low high = l_high ).
l_year = l_value+11(4).
l_value = random=>numc( low = 1 high = 12 ).
l_month = l_value+13(2).
case l_month.
when 2.
l_high = 28.
when 4 or 6 or 9 or 11.
l_high = 30.
when others.
l_high = 31.
endcase.
l_value = random=>numc( low = 1 high = l_high ).
l_day = l_value+13(2).
l_date+0(4) = l_year.
l_date+4(2) = l_month.
l_date+6(2) = l_day.
rval = l_date.
endmethod. "dats
method time.
data: l_time type t,
l_hour(2) type n,
l_min(2) type n,
l_sec(2) type n,
l_value type random=>numcv.
l_value = random=>numc( low = 0 high = 60 ).
l_sec = l_value+13(2).
l_value = random=>numc( low = 0 high = 60 ).
l_min = l_value+13(2).
l_value = random=>numc( low = 1 high = 24 ).
l_hour = l_value+13(2).
l_time+0(2) = l_hour.
l_time+2(2) = l_min.
l_time+4(2) = l_sec.
rval = l_time.
endmethod. "time
method numc.
Go from {0,...,random=>max} to {low,...,high} with ABAP rounding
data: l_dec(16) type p,
l_char(16) type c.
l_dec = ( ( high - low + 1 ) * random=>number( ) ) / random=>max
+ '0.5'.
subtract 1 from l_dec.
add low to l_dec.
data: lr_type_descr type ref to cl_abap_typedescr,
lr_elem_descr type ref to cl_abap_elemdescr.
lr_type_descr =
cl_abap_typedescr=>describe_by_data( rval ).
lr_elem_descr ?= lr_type_descr.
l_char = l_dec.
shift l_char left deleting leading space.
rval = l_char+0(lr_elem_descr->output_length).
endmethod. "i
method i.
Go from {0,...,random=>max} to {low,...,high} with ABAP rounding
data: l_dec(16) type p,
l_char(16) type c.
l_dec = ( ( high - low + 1 ) * random=>number( ) ) / random=>max
+ '0.5'.
subtract 1 from l_dec.
add low to l_dec.
data: lr_type_descr type ref to cl_abap_typedescr,
lr_elem_descr type ref to cl_abap_elemdescr.
lr_type_descr =
cl_abap_typedescr=>describe_by_data( rval ).
lr_elem_descr ?= lr_type_descr.
l_char = l_dec.
shift l_char left deleting leading space.
rval = l_char+0(lr_elem_descr->output_length).
endmethod. "i
method int2.
Go from {0,...,random=>max} to {low,...,high} with ABAP rounding
data: l_dec(16) type p,
l_char(16) type c.
l_dec = ( ( high - low + 1 ) * random=>number( ) ) / random=>max
+ '0.5'.
subtract 1 from l_dec.
add low to l_dec.
data: lr_type_descr type ref to cl_abap_typedescr,
lr_elem_descr type ref to cl_abap_elemdescr.
lr_type_descr =
cl_abap_typedescr=>describe_by_data( rval ).
lr_elem_descr ?= lr_type_descr.
l_char = l_dec.
shift l_char left deleting leading space.
rval = l_char+0(lr_elem_descr->output_length).
endmethod. "i
method int1.
Go from {0,...,random=>max} to {low,...,high} with ABAP rounding
data: l_dec(16) type p,
l_char(16) type c.
l_dec = ( ( high - low + 1 ) * random=>number( ) ) / random=>max
+ '0.5'.
subtract 1 from l_dec.
add low to l_dec.
data: lr_type_descr type ref to cl_abap_typedescr,
lr_elem_descr type ref to cl_abap_elemdescr.
lr_type_descr =
cl_abap_typedescr=>describe_by_data( rval ).
lr_elem_descr ?= lr_type_descr.
l_char = l_dec.
shift l_char left deleting leading space.
rval = l_char+0(lr_elem_descr->output_length).
endmethod. "i
method f.
Go from {0,...,random=>max} to [low;high]
rval = ( ( high - low ) * random=>number( ) ) / random=>max
+ low.
endmethod. "f
method class_constructor.
charsmax = strlen( chars ) - 1.
xmax = strlen( x_data ) - 1.
seed = 1.
endmethod. "class_constructor
endclass. "random IMPLEMENTATION
SELECTION-SCREEN *
selection-screen begin of block gen with frame.
parameters:
p_amount type i default 30,
p_dbinfo as checkbox,
p_dbshrt as checkbox.
selection-screen end of block gen.
parameters:
p_list type num1 default 3.
selection-screen begin of block tit with frame title text-tit.
parameters:
p_tit01 type lvc_s_layo-grid_title default text-p01. "TITLE
selection-screen end of block tit.
selection-screen begin of block lay with frame title text-lay.
parameters:
p_lay01 as checkbox. "ZEBRA
selection-screen skip.
parameters:
p_lay02 as checkbox, "NO HORIZONTAL LINES
p_lay03 as checkbox. "NO VERTICAL LINES
selection-screen skip.
parameters:
p_lay04 as checkbox. "NO SCROLLING
selection-screen skip.
parameters:
p_lay06 type syucomm, "F2CODE
p_lay07 as checkbox. "CONFIRMATION PROMPT
selection-screen end of block lay.
selection-screen begin of block spa with frame title text-spa.
parameters:
p_spa01 as checkbox, "BOX
p_spa02 as checkbox, "COUNT FELD
p_spa03 as checkbox, "NO COLUMN HEADERS
p_spa04 as checkbox. "COLUMN OPTIMIZE
selection-screen begin of block hot with frame title text-hot.
parameters:
p_hot01 as checkbox. "NO HOTSPOT
parameters:
p_hot02 as checkbox. "Hotspot auf Zeilenebene
select-options:
p_hotf02 for g_int_field no intervals default 1.
parameters:
p_hot03 as checkbox.
select-options:
p_hotf03 for g_field no intervals.
selection-screen end of block hot.
selection-screen begin of block mrg with frame title text-mrg.
parameters:
p_mrg01 radiobutton group mrge, "Default
p_mrg02 radiobutton group mrge, "kein Merge
p_mrg03 radiobutton group mrge. "Merge
selection-screen end of block mrg.
selection-screen begin of block out with frame title text-out.
parameters:
p_out01 as checkbox.
select-options:
p_outf01 for g_field no intervals.
selection-screen end of block out.
selection-screen begin of block tec with frame title text-tec.
parameters:
p_tec01 as checkbox.
select-options:
p_tecf01 for g_field no intervals.
selection-screen end of block tec.
selection-screen begin of block fix with frame title text-fix.
parameters:
p_fix01 as checkbox.
select-options:
p_fixf01 for g_field no intervals.
selection-screen end of block fix.
selection-screen begin of block txt with frame title text-txt.
selection-screen pushbutton /1(50) text-pb2 user-command pb02.
selection-screen end of block txt.
selection-screen begin of block cur with frame title text-cur.
parameters:
p_curanz type i,
p_curspc as checkbox default space.
selection-screen skip.
select-options:
p_curf00 for g_field no intervals.
parameters:
p_cur01 radiobutton group cur default 'X',
p_curf01 type lvc_s_fcat-fieldname.
parameters:
p_cur02 radiobutton group cur,
p_curf02 type g_ty_s_sflight-currency.
selection-screen end of block cur.
selection-screen begin of block sort with frame title text-srt.
selection-screen pushbutton /1(20) text-pb1 user-command pb01.
selection-screen end of block sort.
selection-screen end of block spa.
selection-screen begin of block key with frame title text-key.
parameters:
p_key01 as checkbox, "KEYFELDER ALS HOTSPOT
p_key02 as checkbox. "NO KEY FIXIERUNG
selection-screen end of block key.
selection-screen begin of block exp with frame title text-exp.
parameters:
p_excp01 as checkbox, "EXCEPTION
p_excp_c as checkbox. "EXCEPTION CONDENSE
selection-screen end of block exp.
selection-screen begin of block sum with frame title text-sum.
parameters:
p_sum01 as checkbox, "SUM BEFORE
p_sum02 as checkbox, "NUMC
p_sum03 as checkbox, "NO UNITSPLIT
p_sum04 as checkbox, "TOTALS ONLY
p_sum05 as checkbox, "NO SUMCHOICE
p_sum06 as checkbox, "NO SUMLINE
p_sum07 type sy-msgli, "TOTALS TEXT
p_sum08 as checkbox, "NO SUBCHOICE
p_sum09 as checkbox, "NO SUBTOTALS
p_sum10 type sy-msgli. "SUBTOTALS TEXT
selection-screen begin of block dos with frame title text-dos.
parameters:
p_dos01 as checkbox.
select-options:
p_dosf01 for g_field no intervals.
selection-screen end of block dos.
selection-screen begin of block nos with frame title text-nos.
parameters:
p_nos01 as checkbox.
select-options:
p_nosf01 for g_field no intervals.
selection-screen end of block nos.
selection-screen end of block sum.
selection-screen begin of block col with frame title text-col.
parameters:
p_col01 as checkbox.
select-options:
p_colf01 for g_int_field no intervals default 1.
parameters:
p_col02 as checkbox.
select-options:
p_colf02 for g_field no intervals.
parameters:
p_col03 as checkbox.
select-options:
p_colf03 for g_field no intervals.
selection-screen end of block col.
selection-screen begin of block prn with frame title text-prn.
parameters:
p_lpr01 as checkbox default 'X'. "GROUP CHANGE EDIT
selection-screen skip.
parameters:
p_lpr02 as checkbox. "GET SELINFO
selection-screen skip.
parameters:
p_lpr03 as checkbox, "NO MIN LINESIZE
p_lpr04 type sylinsz, "MIN LINESIZE
p_lpr05 type sylinsz. "MAX LINESIZE
selection-screen skip.
parameters:
p_prn01 as checkbox, "PRINT
p_prn02 type lvc_s_prnt-reservelns, "RESERVE LINES
p_prn03 as checkbox, "NO LISTINFO
p_prn04 as checkbox, "NO SELINFO
p_prn05 as checkbox, "TITEL
p_prn06 type lvc_s_prnt-footline, "FOOTLINE
p_prn07 as checkbox, "PRINT INFO
p_prn08 as checkbox, "NO COVERPAGE
p_prn09 as checkbox, "NO NEW PAGE
p_prn10 as checkbox. "NO CHANGE PRINT PARAMS
selection-screen end of block prn.
selection-screen begin of block evt with frame.
parameters:
p_evt01 as checkbox, "PF_STATUS_SET
p_evt02 as checkbox. "USER_COMMAND
selection-screen skip.
parameters:
p_evt03 as checkbox, "CALLER_EXIT
p_evt04 as checkbox, "LIST_MODIFY
p_evt05 as checkbox, "BEFORE_LINE_OUTPUT
p_evt06 as checkbox. "AFTER_LINE_OUTPUT
selection-screen skip.
parameters:
p_evt07 as checkbox, "SUBTOTAL_TEXT
p_evt08 as checkbox. "REPREP_SEL_MODIFY
selection-screen skip.
parameters:
p_evt09 as checkbox, "TOP_OF_PAGE
p_evt10 as checkbox, "END_OF_PAGE
p_evt11 as checkbox, "TOP_OF_LIST
p_evt12 as checkbox. "END_OF_LIST
selection-screen skip.
parameters:
p_evt13 as checkbox, "TOP_OF_COVERPAGE
p_evt14 as checkbox. "END_OF_COVERPAGE
selection-screen skip.
parameters:
p_evt15 as checkbox, "FOREIGN_TOP_OF_PAGE
p_evt16 as checkbox. "FOREIGN_END_OF_PAGE
selection-screen skip.
parameters:
p_evt17 as checkbox. "GROUPLEVEL_CHANGE
selection-screen end of block evt.
INITIALIZATION *
initialization.
perform f01_f4_field using 'SUM' space changing p_dosf01-low.
p_dosf01-option = 'EQ'.
p_dosf01-sign = 'I'.
append p_dosf01.
perform f01_f4_field using 'SUM' space changing p_nosf01-low.
p_nosf01-option = 'EQ'.
p_nosf01-sign = 'I'.
append p_nosf01.
perform f01_f4_field using 'KEY' space changing p_outf01-low.
p_outf01-option = 'EQ'.
p_outf01-sign = 'I'.
append p_outf01.
perform f01_f4_field using space space changing p_tecf01-low.
p_tecf01-option = 'EQ'.
p_tecf01-sign = 'I'.
append p_tecf01.
perform f01_f4_field using space space changing p_fixf01-low.
p_fixf01-option = 'EQ'.
p_fixf01-sign = 'I'.
append p_fixf01.
perform f01_f4_field using 'CURR' space changing p_curf00-low.
p_curf00-option = 'EQ'.
p_curf00-sign = 'I'.
append p_curf00.
perform f01_f4_field using 'CUKY' space changing p_curf01.
perform f01_f4_field using space space changing p_hotf03-low.
p_hotf03-option = 'EQ'.
p_hotf03-sign = 'I'.
append p_hotf03.
perform f01_f4_field using space space changing p_colf02-low.
p_colf02-option = 'EQ'.
p_colf02-sign = 'I'.
append p_colf02.
perform f01_f4_field using space space changing p_colf03-low.
p_colf03-option = 'EQ'.
p_colf03-sign = 'I'.
append p_colf03.
AT SELECTION-SCREEN *
at selection-screen.
case sscrfields-ucomm.
when 'PB01'.
call screen 1001 starting at 1 1 ending at 80 20.
when 'PB02'.
call screen 1002 starting at 1 1 ending at 80 20.
endcase.
AT SELECTION-SCREEN ON VALUE-REQUEST *
at selection-screen on value-request for p_dosf01-low.
perform f01_f4_field using 'SUM' 'X' changing p_dosf01-low.
at selection-screen on value-request for p_nosf01-low.
perform f01_f4_field using 'SUM' 'X' changing p_nosf01-low.
at selection-screen on value-request for p_outf01-low.
perform f01_f4_field using 'KEY' 'X' changing p_outf01-low.
at selection-screen on value-request for p_tecf01-low.
perform f01_f4_field using space 'X' changing p_tecf01-low.
at selection-screen on value-request for p_fixf01-low.
perform f01_f4_field using space 'X' changing p_fixf01-low.
at selection-screen on value-request for p_curf00-low.
perform f01_f4_field using 'CURR' 'X' changing p_curf00-low.
at selection-screen on value-request for p_curf01.
perform f01_f4_field using 'CUKY' 'X' changing p_curf01.
at selection-screen on value-request for p_hotf03-low.
perform f01_f4_field using space 'X' changing p_hotf03-low.
at selection-screen on value-request for p_colf02-low.
perform f01_f4_field using space 'X' changing p_colf02-low.
at selection-screen on value-request for p_colf03-low.
perform f01_f4_field using space 'X' changing p_colf03-low.
at selection-screen on value-request for p_lay06.
perform f01_f4_fcode using space
space
changing p_lay06.
START-OF-SELECTION *
start-of-selection.
g_repid = sy-repid.
gs_test-select_amount = p_amount.
gs_test-only_db_info = p_dbinfo.
gs_test-db_short = p_dbshrt.
gs_test-list_amount = p_list.
gs_test-layo_title = p_tit01.
gs_test-layo_zebra = p_lay01.
gs_test-layo_no_horiz_lines = p_lay02.
gs_test-layo_no_vert_lines = p_lay03.
gs_test-layo_no_scrolling = p_lay04.
gs_test-layo_f2code = p_lay06.
gs_test-layo_confirmation_prompt = p_lay07.
gs_test-layo_box = p_spa01.
gs_test-layo_count = p_spa02.
gs_test-layo_no_colhead = p_spa03.
gs_test-layo_column_optimize = p_spa04.
gs_test-layo_no_hotspot = p_hot01.
if p_hot02 eq con_true.
loop at p_hotf02.
if not p_hotf02-low is initial.
append p_hotf02-low to gs_test-layo_hotspot_rows.
endif.
endloop.
endif.
if p_hot03 eq con_true.
loop at p_hotf03.
if not p_hotf03-low is initial.
append p_hotf03-low to gs_test-layo_hotspot_columns.
endif.
endloop.
endif.
case con_true.
when p_mrg01.
gs_test-layo_cell_merge = space.
when p_mrg02.
gs_test-layo_cell_merge = 'N'.
when p_mrg03.
gs_test-layo_cell_merge = 'Y'.
endcase.
if p_out01 eq con_true.
loop at p_outf01.
if not p_outf01-low is initial.
append p_outf01-low to gs_test-fcat_no_out_fields.
endif.
endloop.
endif.
if p_tec01 eq con_true.
loop at p_tecf01.
if not p_tecf01-low is initial.
append p_tecf01-low to gs_test-fcat_tech_fields.
endif.
endloop.
endif.
if p_fix01 eq con_true.
loop at p_fixf01.
if not p_fixf01-low is initial.
append p_fixf01-low to gs_test-fcat_fix_column_fields.
endif.
endloop.
endif.
gs_test-curr_amount = p_curanz.
gs_test-curr_space = p_curspc.
if p_cur01 eq con_true or p_cur02 eq con_true.
data: ls_fcat_curr type g_ty_s_fcat_curr.
loop at p_curf00.
clear ls_fcat_curr.
if not p_curf00-low is initial.
ls_fcat_curr-fieldname = p_curf00-low.
case con_true.
when p_cur01.
ls_fcat_curr-cfieldname = p_curf01.
when p_cur02.
ls_fcat_curr-currency = p_curf02.
endcase.
append ls_fcat_curr to gs_test-fcat_curr_fields.
endif.
endloop.
endif.
gs_test-layo_keys_hotspot = p_key01.
gs_test-layo_no_keyfix = p_key02.
gs_test-excp_display = p_excp01.
gs_test-excp_condense = p_excp_c.
gs_test-sum_before = p_sum01.
gs_test-sum_numc = p_sum02.
gs_test-sum_no_unitsplit = p_sum03.
gs_test-sum_totals_only = p_sum04.
gs_test-sum_no_sumchoice = p_sum05.
gs_test-sum_no_sumline = p_sum06.
gs_test-sum_totals_text = p_sum07.
gs_test-sum_no_subchoice = p_sum08.
gs_test-sum_no_subtotals = p_sum09.
gs_test-sum_subtotals_text = p_sum10.
if p_dos01 eq con_true.
loop at p_dosf01.
if not p_dosf01-low is initial.
append p_dosf01-low to gs_test-fcat_do_sum_fields.
endif.
endloop.
endif.
if p_nos01 eq con_true.
loop at p_nosf01.
if not p_nosf01-low is initial.
append p_nosf01-low to gs_test-fcat_no_sum_fields.
endif.
endloop.
endif.
gs_test-layo_group_change_edit = p_lpr01.
gs_test-layo_get_selinfo = p_lpr02.
gs_test-layo_no_min_linesize = p_lpr03.
gs_test-layo_min_linesize = p_lpr04.
gs_test-layo_max_linesize = p_lpr05.
gs_test-prnt_print = p_prn01.
gs_test-prnt_reserve_lines = p_prn02.
gs_test-prnt_no_listinfo = p_prn03.
gs_test-prnt_no_selinfo = p_prn04.
gs_test-prnt_with_title = p_prn05.
gs_test-prnt_footline = p_prn06.
gs_test-prnt_printinfo = p_prn07.
gs_test-prnt_no_coverpage = p_prn08.
gs_test-prnt_no_new_page = p_prn09.
gs_test-prnt_no_change_print_params = p_prn10.
if p_col01 eq con_true.
loop at p_colf01.
if not p_colf01-low is initial.
append p_colf01-low to gs_test-color_rows.
endif.
endloop.
endif.
if p_col02 eq con_true.
loop at p_colf02.
if not p_colf02-low is initial.
append p_colf02-low to gs_test-color_fields_column.
endif.
endloop.
endif.
if p_col03 eq con_true.
loop at p_colf03.
if not p_colf03-low is initial.
append p_colf03-low to gs_test-color_fields_cell.
endif.
endloop.
endif.
if p_evt01 eq con_true.
append con_event_01 to gs_test-events.
endif.
if p_evt02 eq con_true.
append con_event_02 to gs_test-events.
endif.
if p_evt03 eq con_true.
append con_event_03 to gs_test-events.
endif.
if p_evt04 eq con_true.
append con_event_04 to gs_test-events.
endif.
if p_evt05 eq con_true.
append con_event_05 to gs_test-events.
endif.
if p_evt06 eq con_true.
append con_event_06 to gs_test-events.
endif.
if p_evt07 eq con_true.
append con_event_07 to gs_test-events.
endif.
if p_evt08 eq con_true.
append con_event_08 to gs_test-events.
endif.
if p_evt09 eq con_true.
append con_event_09 to gs_test-events.
endif.
if p_evt10 eq con_true.
append con_event_10 to gs_test-events.
endif.
if p_evt11 eq con_true.
append con_event_11 to gs_test-events.
endif.
if p_evt12 eq con_true.
append con_event_12 to gs_test-events.
endif.
if p_evt13 eq con_true.
append con_event_13 to gs_test-events.
endif.
if p_evt14 eq con_true.
append con_event_14 to gs_test-events.
endif.
if p_evt15 eq con_true.
append con_event_15 to gs_test-events.
endif.
if p_evt16 eq con_true.
append con_event_16 to gs_test-events.
endif.
if p_evt17 eq con_true.
append con_event_17 to gs_test-events.
endif.
gs_test-buffer_active = space.
gs_test-bypassing_buffer = space.
END-OF-SELECTION *
end-of-selection.
perform f01_call_list.
*& Form f01_call_list
text
form f01_call_list .
data: ls_prnt type slis_print_alv,
lt_excl type slis_t_extab,
l_exit type char1,
ls_exit type slis_exit_by_user,
l_list type num1.
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = g_repid
i_callback_pf_status_set = ' '
i_callback_user_command = ' '
it_excluding = lt_excl.
do gs_test-list_amount times.
add 1 to l_list.
perform f01_append_list using l_list.
enddo.
perform f01_set_prnt changing ls_prnt.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
exporting
i_interface_check = ' '
is_print = ls_prnt
i_screen_start_column = 0
i_screen_start_line = 0
i_screen_end_column = 0
i_screen_end_line = 0
importing
e_exit_caused_by_caller = l_exit
es_exit_caused_by_user = ls_exit
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " f01_call_list
*& Form f01_append_list
text
form f01_append_list using value(i_list) type num1.
data: ls_layo type slis_layout_alv,
lt_fcat type slis_t_fieldcat_alv,
lt_sort type slis_t_sortinfo_alv,
lt_evts type slis_t_event,
l_tabname type slis_tabname.
field-symbols: <l_table> type any.
perform f01_get_outtab using i_list.
case i_list.
when 1.
gt_outtab1 = gt_outtab[].
when 2.
gt_outtab2 = gt_outtab[].
when 3.
gt_outtab3 = gt_outtab[].
when 4.
gt_outtab4 = gt_outtab[].
when 5.
gt_outtab5 = gt_outtab[].
when 6.
gt_outtab6 = gt_outtab[].
when 7.
gt_outtab7 = gt_outtab[].
when 8.
gt_outtab8 = gt_outtab[].
when 9.
gt_outtab9 = gt_outtab[].
endcase.
perform f01_set_layo changing ls_layo.
perform f01_set_fcat changing lt_fcat.
perform f01_set_evts changing lt_evts.
concatenate 'LIST_' i_list into l_tabname.
case i_list.
when 1.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = ls_layo
it_fieldcat = lt_fcat
i_tabname = l_tabname
it_events = lt_evts
it_sort = lt_sort
i_text = 'Hello' "#EC NOTEXT
tables
t_outtab = gt_outtab1
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
when 2.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = ls_layo
it_fieldcat = lt_fcat
i_tabname = l_tabname
it_events = lt_evts
it_sort = lt_sort
i_text = 'Hello' "#EC NOTEXT
tables
t_outtab = gt_outtab2
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
when 3.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = ls_layo
it_fieldcat = lt_fcat
i_tabname = l_tabname
it_events = lt_evts
it_sort = lt_sort
i_text = 'Hello' "#EC NOTEXT
tables
t_outtab = gt_outtab3
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-ms -
Share photos by email not working in Photos Version 1.0 (209.52.0) on a Macbook Pro 17" Yosemite 10.10.3. Brings up grayed out check box? Want to share photos thru MS Entourage for Mac 2008 Ver. 12.3.6 Thanks!
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
How to create a message check boxes group dynamically in OA Framework
Hi all,
I am developing a custom OAF page. It is a master-detail page. And I am having some difficulties to build that.
Firstly, I need to create a dynamic message check boxes group. These check boxes will get the prompt from a standard database table's column. Let's say I have table X with description column and it has 7 rows. Values of description column are A,B,C, ...etc. Then my master region on the page will have 7 check boxes with the prompts of A,B, C... Check box number will depend on the row/rows that this table has.
The other requirement is to create master and detail rows that depends on the number of any checked check boxes. If 2 check boxes are checked then we need to create 2 rows of master data and detail data too.
Does any of you have any ideas or suggestions to do that?
It is urgent, any help would be appreciated.
Thanks in advance and regards
PS: Is it possible to do that? Can anyone put some light on this thread please?
Edited by: user1742330 on Aug 12, 2012 4:23 PMPlease help me out with this issue...
I am in a very urgent situation. Any idea about this thread??? -
Add a Check box to a Report?
I see a lot of posts with what you can do with a CheckBox (if you have one!). I've created a page to upload/download files...
http://apex.oracle.com/pls/otn/f?p=55283:802
But then realized that I couldn't delete a file that I've uploaded. I thought a CheckBox with a "Delete" button, as I'v seen on tabular forms would be a great idea. I have a pag in an application that does exactly that; but I've not yet figured out how to replicate that functionality!
When I look at the Column Attributes for the Check box, in my working TABULAR FORM, I don't get a TABULAR FORM ELEMENT...In my example I tried to create a column, but can't make it a Check box>
Ideally I'd like:
1. A check box for each row (okay if it supports multiple check boxes)
2. A delete button to delete the selected rows from the table.
Appreciate any insights....
KSL.Thanks for the prompt response!
Didn't quite follow the Syntax!
But after playing abit, I finall got it to work...I didn't know what to put for table_column1 for the check box so I pulled th ID again. I might delete my second ID, and just create another column to download...
Either way, it works now! THanks!
Here's what my code now looks like:
SELECT apex_item.checkbox(1, ID) " "
, apex_item.display_and_save(2, ID) ID
, apex_item.display_and_save(3, NAME) Name
, apex_item.display_and_save(4, FILENAME) FileName
, apex_item.display_and_save(5, DOC_SIZE) DocSize
, apex_item.display_and_save(6, UPDATED_BY) UpdatedBy
, apex_item.display_and_save(7, UPDATED_ON) UpdatedOn
FROM APEX_APPLICATION_FILES
And my page is:
http://apex.oracle.com/pls/otn/f?p=55283:802
Thanks again!
By they way...in my haste, I gave you "Helpful" as i couln't get my SQL right. While drafting another question, I kept playing with it until I figured it out. If you'd kindly reply back to this, I'll answer as "correct". Sorry about that!
Kevin -
How can version control check-in prompts be disabled?
We are using RoboHelp 11 with TFS for version control, and the check-in prompts are killing our productivity. The TFS interface is slow to begin with, but we are getting 3-4 prompts every time we do something as simple as renaming a file, plus tons of "No Changes to Check-In" message boxes we have to clear. If we move a folder containing several topics and images, it gets downright ridiculous. I literally just had to sit for 23 minutes clicking on confirm boxes just to move a folder from one location to another - there were about 4 confirm boxes to click for every single topic file and image file. Is there a solution for this?
I believe these dialogs are from TFS, not from RoboHelp. Ask your TFS admin. He may be able to disable those prompts.
Kind regards,
Willam -
Keeping or Saving a check box in agentry
Hi;
I am working on customising Work Manager 6.0 on Agentry Editor 6.1.3. I have a list of personnel on the left side of the screen and on the right hand side, I have a check box that shows for every personnel selected on the left side. Somehow when I tick this check box and move on to select another personnel, when I return to the previous one that I had checked, the check is gone and the check box is empty again. What steps do I have to do/undertake so as to retain this check box tick even when I navigate/select another personnel with their own tickbox?
Your help is very much appreciated!
Thanks and Regards;
Sizo NdlovuHi Jason;
Thank you for the prompt response, ok, so I am using the WPF Client on windows to do the testing. This is a totally new screenset that I have created from scratch. Please see screenshot:
The screen on the left hand side is a Tile List.
The screen on the right hand side is a transaction screen that is being called by a Tile Edit defined field. What I would like to do is that, when a particular individual/personnel has been selected on the left and ticked on the right hand side, have their details: PersName, PersID and Work Centre stored on a different object/table for transmission later to the backend. This check box is created as a button on the screen and attached to a boolean property type, true when checked and false when unchecked.
I hope this answers all your questions to help me.
Thanks;
Sizo -
Reset radiobutton list when check box unchecked
I have a static PDF registration form that I am working on using LiveCycle Designer 8.2. I would like to learn how to have a radiobutton list reset when a particular check box is unchecked.
When registering for the event, users have the option of attending 1 of the 4 optional afternoon workshop sessions. I have successfully made the workshop radiobuttons hidden until the check box is checked using the following code:
(check box is named "Reg4" -- this is where they say "yes" I'm going to attend 1 of the 4 workshops,
radiobutton list of the 4 workshops is named "RadioButtonList3")
topmostSubform.Page1.Reg4::change - (JavaScript, client)
if (this.rawValue == "0") {
this.resolveNode("RadioButtonList3").presence = "hidden";
When the user unchecks the "Reg4" checkbox after they have selected 1 of the 4 workshops, that radiobutton is still checked.
What I'm looking for is to have the radiobutton list reset (or again hidden) when the Reg4 button is unchecked (after previously being checked).
I hope my description is clear. Is this possible?Thank you again, Jono, for your reply. I was worried that the Static PDF was the trouble but I just couldn't take no for an answer!
If you're willing, I'd be happy to send you my file but am unable to post publicly.
In an earlier version the RadioButtonList3 is hidden when first viewing the file. It was done using FormCalc. (I know you said don't mix the languages but, hey, it worked!) Also, I found a post you had last year in the discussion "Prompt User to click checkbox (radio button)" where you described a message box using Java. I snagged that and put it on the enter event of the Reg4 field.
When I preview the PDF, this is what I now have:
Upon first view, RadioButtonList3 is hidden and am unable to select (perfect)
When I check the Reg4 box, I get the "You will be registered for a..." warning message (perfect)
I can now make a selection in the RadioButtonList3 (perfect)
If I uncheck the Reg4 box without making a selection on RadioButtonList3, the RadioButtonList3 again hides (perfect)
If I check the Reg4, then make a selection on RadioButtonList3, and then uncheck the Reg4 box, the RadioButtonList3 is reset (perfect)
BUT the RadioButtonList3 is still visible and a selection can now be made (not perfect because the Reg4 box is now unchecked and the user will only be registered for the event if Reg4 is checked)
#1 RadioButtonList3 will hide only if it has not been selected and reset first.
#2 The warning message only appears the first time Reg4 is checked.
These 2 items somehow seem related. Is there something that tells it "use this code when you first open the document but act differently once you've started checking boxes" so it only acts as I intend on the first go-around?
Here's all of my code:
topmostSubform.Page1.RadioButtonList3::calculate - (FormCalc, client)
if (Reg4 == "0") then
RadioButtonList3.access = "readOnly"
else
RadioButtonList3.access = "open"
endif
topmostSubform.Page1.Reg4::change - (JavaScript, client)
if (this.rawValue == 1) {
RadioButtonList3.presence = "visible";
else {
RadioButtonList3.rawValue = "";
RadioButtonList3.presence = "hidden";
topmostSubform.Page1.Reg4::enter - (JavaScript, client)
if (RadioButtonList3.rawValue == "") {
xfa.host.messageBox("You will be registered for an Optional Workshop ONLY if this box is checked. Don't forget to tell us which workshop you will be attending.");
this.rawValue == null;
So sorry for the lengthy post. I'm open to any ideas that anyone may have.
This certainly is a learning experience! -
SharePoint 2007 no check in prompt while exiting word
Hi,
I am using SharePoint 2007 and office 2007 professional plus. I am facing issue in the following scenario:
1. Created a document library with custom content types for Word.
2. I am able to create a new document using the template.
3. When I click on the document library, there is a prompt to check out the document in the drafts folder.
4. When I modify the document and click on X (close) then I am prompted to save the document. After I click "Yes" the document does not prompt for any check in.
5. In the library the document shows as checked out and I am able to check in from the document context menu.
This scenario (check in prompt) works fine when the library does not use any word content type. Also this issue is with Office 2007 and 2010 suite. I have tested with Office 2013 and I get the check in prompt on the same library which is configured to use
"Word" content type and template.
Please advise any suggestions to fix this issue.
Also in the document library the option "Require documents to be checked out before they can be edited? " is set as YES and Word uses the local drafts folder to save documents for offline editingGo to library settings, versioning settings, check the box to require check out. It is disabled by default.
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com -
Check boxes not working ... any suggestions
I have a user that is having problems checking any check boxes within CRM. Their workstation was recently upgraded to Windows 7 with IE8. does anybody know of any setting which might prevent the clicking on the checkbox to work ? I can log in with their id and it works fine from an XP and IE7 machine.
One additional setting that I found that needed to be checked in the Internet Options is the "Display Mixed Content" option. We have some embedded reports and web pages within CRMOD and in order to suppress a warning box, we needed to changed the setting from "Prompt" to "Enable". If you're embedding other content within your instance, that might be of use to you.
Maybe you are looking for
-
Downloading apps it asks for apple ID Pass then it says "verification required". Then says Security Code required. Doesn't accept code. itunes doesn't accept code from visa card either?Please Help
-
I've resorted to running Safari when downloading anything. I really would like to remain with Firefox, but I can't figure anything out. I recently upgraded to 10.5 (Leopard) and that's when the downloading issues started. In addition my default locat
-
Apps Refuse to Open - I haven't found an answer to this anywhere else :(
Hey, I have recently had trouble with a few apps made by the company Voltage Inc., it seems similar to a lot of problems seen with apps on the iPod touch, when I touch the app to load it, it starts up but then after a few seconds it shuts off again,
-
My ipad has not been able to detect wifi
i have reset it and rextored it, and it hasent worked for 4 days, i called apple and they said it was the router and it needs an up date, but we just got it is month.
-
iTunes 11 doesn't seem to like my Audible files anymore. They import fine, but then I can't seem to get them to come up in iTunes. Anyone know what's up?