Check box with value in bsp page

hi experts.
i m new to bsp.
i want to fetch one field from a ztable with check box may be possible field have more than 4 values.
checkbox1           .... value1
checkbox2          ..... value2
checkbox3          ..... value3
checkbox4          ..... valule4
but there is not any field for checkbox in ztable .
now when we select check box depending on the selection of checkbox related values of field come into the 2nd page.
example if i select check box 3 and 4 than values related to value 3 and value 4 come into the 2nd page .
if any budy have gud example of this case plz let me know.
points are guarented...

PAGE ATTRIBUTE.
itab_result     TYPE     ST_TV
wa_result     TYPE     TY_TV
LAYOUT.
    <% data: v_checkbox_id type string,
      sy_tabix type string.
Loop at itab_result into wa_result.
sy_tabix = SY-TABIX.
concatenate v_checkbox_id 'CHK' sy_tabix into v_checkbox_id.%>
<td>
<htmlb:checkbox id = "<%= v_checkbox_id %>"
        text = "<%= wa_result-stext %>"
      checked = "<%= wa_result-idx_data %>"
       />
</td>
<% ENDLOOP.

Similar Messages

Counting Check Boxes with values

I have a sub-form where I gave each check box a value: sum(ICB6, ICB7, ICB11, ICB12, ICB16, ICB17, ICB21, ICB22), but what I want to do now is take this total and divide by the # of check boxes actaully checked. For example; if 2 of the boxes are checked my total is 7, then I want to divide it by 2 (the number of boxes checked) to get 3.5 as my score. I can not figure out how to make that happen?

If we assume that the Default value of your unchecked checkbox is zero, in the click/change event of the checkbox you can total the value of the checkboxes and divide it by 2.
Var total = (CheckBox1.rawValue + CheckBox2.rawValue+ CheckBox3.rawValue + ....) / 2
Thanks,
Bibhu.

Check box with redirect

Hi :
In application express as we have select withredirect can you include check box with redirect
please suggest
Thanks
sudhir

Sudhir,
Check whether the following javascript helps you.
function go() {
var abc = '';
var radioLength = document.wwv_flow.p_v05.length;
var retVal = '';
if(radioLength == undefined)
          if(document.wwv_flow.p_v05.checked)
               retVal = document.wwv_flow.p_v05.value;
          else
               return "";
for(var i = 0; i < radioLength; i++) {
          if(document.wwv_flow.p_v05.checked) {
               retVal = retVal + '4' +document.wwv_flow.p_v05[i].value;
retVal = retVal.substring(1, retVal.length);
if(retVal=='Y')
var answer = confirm("Do you want to move to the page a ? If yes,press OK to move to a , CANCEL to stay here");
if (answer == true)
alert('Please wait while we transfer you to the Consulting Win Story template');
location.href="url a ";
else
return"";
if(retVal=='N')
alert(' Thank you');
location.href="same page url";}
here i have used the option button to move to another page and stay in the same page.
If you want to submit the page for any value,
you can write doSubmit( submitbuttonname);
call this function on the option button, in html form element attributes.
name ="p_v05" onClick="go()"
Message was edited by:
archana

How to add a list box with values for a ztable in SM30

Hello Gurus,
I had created a table maintenance for Ztable and added many extra functionality to that. Now i would like to add a list box or check table for a field. Can i do that with out Regenerating my table maintenance. Please help me its..very urgent.

Have referred this domain to the data element, this should be the Field type in ur table for the particular field.
Eg: <b>SE11 > table name > fields-ZTEST > fieldtype-ZZTEST</b>
ZZTEST in the data element > create a domain for this data element and in that specify teh value range.
Save and activate it.
Make sure that u regenerate teh table maintenance generator else u cant see the changes.
Now if u press F4 u can see only thevalues specified, also u will see only the list box with values in SM30.
Try this,please let me know if u face any difficulties.

Oracle apex check box with update column

hi to all:
i have report emp.it contain data like eno,ename,sal,record .
example:eno ename sal record
100 a 100
200 b 3000 going on...
using this column i am making report by using apex and report contain one submit button also.
1)in this report i am creating dynamic check box depend on eno..see my coding
declare
str varchar2(3000);
begin
str:='select htmldb_item.CHECKBOX(10,eno,DECODE(record,1,''CHECKED'')) "SELECT" ,eno,ename,sal ,record from emp where 1=1';
return str;
end;
2)in process crated after submit
iam created pl/code like ..this code for
declare
i number;
str varchar2(2000);
emp_id number;
begin
FOR i in 1..HTMLDB_APPLICATION.G_F10.count
LOOP
IF HTMLDB_APPLICATION.G_F10(i) is not null then
SELECT htmldb_application.G_F10(i) INTO emp_id from dual;
--insert into my_log values(emp_id);commit;
update emp set record=1 where eno=emp_id ;
commit;
else if HTMLDB_APPLICATION.G_F10(i) is null then
update emp set record=0 where eno=emp_id ;
commit;
else
null;
end if;
end loop;
end;
my requirenent:
a)if check box checked then -update -record column -1
b)if check box uncked then -update - record column -0
in process coding--
eno alway is not null only..
so i want to do check box with update the record column..like this
a)if check box checked then -update -record column -1
b)if check box uncked then -update - record column -0
pls give solution.
output i want like this example:
chebox eno ename sal record
checked(X) 100 a 300 1
checked(x) 200 b 300 1
next time i am trying to make uncheck first row like
chebox eno ename sal record
unchecked 100 a 300 0
checked(x) 200 b 300 1

I'm not really sure what your problem is but if you are trying to update/save data when a checkbox is checked I would use javascript to call an application process to do the update/save.
/Daniel

How to create a check box with an X

Hi,
How do you create a check box with an X as apposed to a tick?
Thanks

Go to the check box's properties and in the Options tab choose "Cross" as the check box style.

Check Box With Tick Mark on Sap Script

Hello All,
We need to add a check box with tick mark on Sap Script.Please can anyone let me know how can we add it.
Regards
Amruta

hi amruta,
The soluti as an image into on to your problem can be to use the symbol icon as told , but this may show in preview not in print.
I too faced the same problem.
So what i had done is created a new window with the diemnsions of the chekc box with border thcikness 8 tw and inside that window place a checkmark symbol.
if this checkmark symbol also does not show up in print preview/ doesshow in print preview and not in print then you can scan a chekcmark image and upload it into business document server as a BMP/ TIFF image and use this image in your checkbox window.
Hope this solves your problem.
Warm Regards
Venugopal.T

Check boxes with submit

Hi
Is it possible to have check boxes with submit in APEX like selected list with submit.
The requirement is as follows
we have different systems and under each system there are number of applications.
The systems and applications should appear as checkboxes to select.
If I select a particular checkbox for a system, list of applications under that system should appear in form of checkboxs.
secondly, I should also have an option for selecting multiple systems and multiple applications.
Can anyone advice me how this can be achieved.
Thanks.

in HTML Form Element Attributes of your CHECKBOX put:
onClick="javascript:doSubmit(CHECK_BOX_CLICKED');"
Hope this helps...

Collecting values from multiple check boxes with same name

Hi,
I have a jsp-page with one form with several check boxes sharing the same
name (but with different values).
Can I collect the values in an array/list or something?
/jsp-beginner and google ain't my friend in this case

this answer not good enough for you?

Check box with Boolean data type is not behaving properly

Hi,
I create a sample application with one entity driven view object with two attributes. One is of String data type [Value will be Y/N] and another (transient) attribute with Boolean data type. I planned to bind this boolean data type attribute to UI. I overridded the view row impl class and included setting of boolean attribute inside the setter of String attribute. Also in the getter of boolean attribute, added code to check the string attribute and return true/false based on that. Everything is working fine in application module tester. But when i test the same in view controller project in a page, it is not working. Always Check box component is not checked eventhough when i explicitly check it.
[NOTE: I have given the control hint of Boolean attribute as check_box. Also i don't want selected/unselected entries in the page def file. That's why followed this approach]
Have i missed out anything? Why this behaviour.
Thanks in advance.
Raguraman

what is the value that is going in when u check it.. did u debug it.. is the viewRowimps setter and getter getting called.. and is it having the right value set and got.. and ur sure that ur using selectBooleanCheckBox..
ur binding the checkbox to the transient value right??

Assign a value from dropdownlist to input field value on BSP page

Hi,
I'm new to SAP and ABAP. We have a CRM project in which I have to maintain BSP pages.
Now, coming to my problem: I have a input field with
value = "//BTAdminH/HeaderInfo"
This field is normally maintainable. The required function is now to set this field as not maintainable/readonly. Then, the value should be set automatically to an value, which will be selected from a dropdownListBox. After saving, the value HeaderInfo should have the same value like the selected value from the dropdownListBox.
How can I now set the field as readonly (this should be the easier part) and
how can I set the value for the HeaderInfo to the value of the selected value from the dropdownListBox?
If I set it directly like this
value = "//BTActivity/Priority"
it is shown on the BSP page correclty, but it is not saved as HeaderInfo.
Please help me.
Enja

Hello Gokul,
test was only for test purposes! I am using as a separator the plus sign!
But this is not the problem!
In debugging, the local variable has the concatenated value! So, this is working!
oncatenate ls_ddlb1-value ls_ddlb2-value ls_ddlb3-value into lv_headerinfo SEPARATED BY ' + '.
But when I assign the value of my set_headerinfo to the local variable, then it is returning only the separator sign!!!
if BTAdminH->GET_HEADERINFO( 'HEADERINFO' ) is initial.
BTAdminH->SET_HEADERINFO( attribute_path = 'HEADERINFO' value = lv_headerinfo ).
endif.
If I declare the local variable as one of the dropdown values, then it is getting populated also for set_headerinfo
lv_headerinfo =ls_ddlb1-value.
So, the assigning is also working! But it is not working, when the local variable equals more than one value! I hope that I could explained it in the right way for you!!!!
So. why is the value for set_headerinfo not the same as the one for the local variable! The local variable has the correct value after the concatination.
Regards
Enja

Binding a Check Box with a User Defined Field

Hi everyone,
i v created a user defined field (U_CheckPro)in the system table "OITM" with two values: Y for Yes and N for No. In relation to that i v also created a check box on the form "150" and would like to know how can i bind my checkbox with my user defined field properly.
The user would be than able to enable or disable the check box for each item (article). The user setting schould be than be active and valid in sbo-business logic, each time an item is selected. (for example in case of sales order ID 133, "OINV").
Any helfpul hints? Samples would be welcome as well.
Thanks and regards
Alban

> First of all you should remove the valid values
> because checkboxes does not work with valid values...
> Just give a default value.
Hi Rasmus,
thank you very much for your helpful hint. I guess my problem is solved by that - nevertheless here is my complete code sequence once again in case of possible errors.
I would appreciate any additional suggestion for improvement of the same.
Thanks and regards
Alban
>>>
Private Sub AddItem()
        ' Test UserSource
        oForm.DataSources.UserDataSources.Add("U_CheckPro", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 1)
        oItem = oForm.Items.Item("122")
        ' Adding a Static Text item
        oNewItem = oForm.Items.Add("StaticTxt2", SAPbouiCOM.BoFormItemTypes.it_STATIC)
        oNewItem.Left = oItem.Left + 20
        oNewItem.Width = 100
        oNewItem.Top = oItem.Top + 12
        oNewItem.Height = 25
        oNewItem.FromPane = oItem.FromPane
        oNewItem.ToPane = oItem.ToPane
        oNewItem.LinkTo = "CheckBox1"
        oStaticText = oNewItem.Specific
        oStaticText.Caption = "Test_Caption"
        ' Adding a Check Box item
        oNewItem = oForm.Items.Add("CheckBox1", SAPbouiCOM.BoFormItemTypes.it_CHECK_BOX)
        oNewItem.Left = oItem.Left
        oNewItem.Width = 20
        oNewItem.Top = oItem.Top + 15
        oNewItem.Height = 19
        oNewItem.FromPane = oItem.FromPane
        oNewItem.ToPane = oItem.ToPane
        oNewItem.DisplayDesc = False
        oCheckBox = oNewItem.Specific
        'binding check box to source
        oCheckBox.DataBind.SetBound(True, "OITM", "U_CheckPro")
    End Sub
>>>

How to link a check box with a text field

Hello, I'm looking for some help with my PDF form. If a check box is checked then I would like to force the user to input a value a related text field. First, is this possible and if so can anyone give me some guidance on how to achinve this. I'm currently using LiveCycle 8.0..
Thanks for your help...

Go to the check box's properties and in the Options tab choose "Cross" as the check box style.

Fixed Vendor check box with BAPI "BAPI_SOURCEDETERMIN_GETSOS"

Hello gurus,
I am new to BAPI & I need to update the source list(ME01) with agreement no., item, unit & fixed vendor check-box.
My question to all that the fixed vendor check box will be checked or not if i use the BAPI BAPI_SOURCEDETERMIN_GETSOS?
Thanks & regards,
Feluda

Hello,
The coding you've made regarding the check/uncheck seems fine...
However, check again logic-atp_wrkmod...
As far as i've seen, the allowed values are space and 'A' .
The value 'X' is not in the domain range.
Hope it helps!!

How to change the check box with the push button in itrator table rows

Hi all,
I want to change the check box of the itrator table rows with push button/ some thing better as to give
the table view more good look and user friendly.
Does any one has tried any other option in table view in place of check box
Thanks
Bhagat

There are various objects which you can create via iterators. Please see the application SBSPEXT_TABLE for more details.
DATA: lo_text      TYPE REF TO cl_htmlb_textview,
        lo_ddlb      TYPE REF TO cl_htmlb_dropdownlistbox,
        lo_input     TYPE REF TO cl_htmlb_inputfield,
        lo_button    TYPE REF TO cl_htmlb_button,
        lo_chk_bx    TYPE REF TO cl_htmlb_checkbox.
row_ref = p_row_data_ref.
CASE p_column_key.
    WHEN 'EFF_DATE'. " Input field
      CREATE OBJECT lo_input.
      lo_input->id       = p_cell_id.
      lo_input->type     = 'DATE'.
      lo_input->showhelp = 'TRUE'.
      lo_input->width    = '60'.
      lo_input->invalid = 'true'.
      p_class            = `ao`.
      lo_input->value     = get_column_value( p_column_key ).
      p_replacement_bee = lo_input.
    WHEN   'NEW_LOC'. " Drop down list box
      CREATE OBJECT lo_ddlb.
      GET REFERENCE OF gt_persa INTO lo_ddlb->table.
      lo_ddlb->id                = p_cell_id.
      lo_ddlb->nameofkeycolumn   = 'NAME'.
      lo_ddlb->nameofvaluecolumn = 'VALUE'.
      lo_ddlb->selection         = get_column_value( p_column_key ).
      lo_ddlb->selection = 'DUMMY'.
      p_replacement_bee          = lo_ddlb.
    WHEN 'MON' . " Check box
      CREATE OBJECT lo_chk_bx.
      lo_chk_bx->id = p_cell_id.
      lo_chk_bx->checked = get_column_value( p_column_key ).
      p_replacement_bee = lo_chk_bx.
    WHEN 'NEW_MGR_SRCH'. " Button
      CREATE OBJECT lo_button.
      lo_button->id            = p_cell_id.
      lo_button->text          = 'Search Mgr'.
      lo_button->onclientclick = 'script'.
      p_replacement_bee = lo_button.
    WHEN OTHERS. " Text
      CREATE OBJECT lo_text.
      lo_text->id       = p_cell_id.
      lo_text->wrapping = 'FALSE'.
      lo_text->text     = get_column_value( p_column_key ).
      lo_text->design   = 'STANDARD'.
      lo_text->textcolor = 'POSITIVE'.
      p_replacement_bee = lo_text.
ENDCASE.
Thanks
A

Check box with value in bsp page

Similar Messages

Maybe you are looking for