Check BUPA / Lock BUPA
Hi experts,
1. Can you tell me who can I check if a Business Parter already exist (Function) ?
2. How can I lock an existing business partner to modify it (Function)?
Thanks in advance...
Hi there,
Check if this functions helps you:
1. BUPA_EXISTENCE_CHECK
2. BUPA_ENQUEUE / BUPA_DEQUEUE
Kind regards,
Garcia
Similar Messages
-
I'm running Vista for operating system on an HP laptop that's about 2 years old. I've installed all current updates.
I've always used Firefox. It started crashing and creating processes but not launching. Went to support and scoped it out -- there was a lock file my profile directory. I deleted it, and Firefox started loading.
Used it a few times -- closed the app each time on exist as per suggestions on support site info. One time -- back to square one, wouldn't load, just created a process. Reboot, ending process, checking for lock file, reinstalling -- all unsucessful.Brian
Below is from using a SIP build. It does offer G722, but it's way down on the list so it's never used...
m=audio 32678 RTP/AVP 0 8 18 102 9 116 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 L16/16000
a=rtpmap:9 G722/8000
a=rtpmap:116 iLBC/8000
a=fmtp:116 mode=20
a=rtpmap:101 telephone-event/8000
Taking Sreekanth's suggestion to try a Skinny build, I get the following when I make a call. It offers codecs in the order I SET THEM AND ONLY THE CODECS I SET! YAY!
m=audio 19374 RTP/AVP 9 0 101
a=rtpmap:9 G722/8000
a=fmtp:9 bitrate=64
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
Using a Skinny build on the phones also solved other issues. The phones use G711 when the whole path supports G711 and G722 when the whole path supports G722. It doesn't always use G722 and rely on transcoding for the call paths that can't use it. It's fantastic.. The phones also receive the QoS tagging that I set and that seems to result in better audio quality than on the SIP builds, which never did get those settings. Finally, it even solved a slow Exchange 2013 answer issue I have been experiencing for quite some time. I practically fell out of my chair when I saw everything that was fixed just by switching...
Cisco, PLEASE FIX YOUR SIP BUILDS! It's insane how the SCCP builds work perfectly and the SIP builds don't, especially with how much these phones cost.. I was thinking of possibly acquiring some 9951s, which are SIP only. I'm a little leery about that at this point. If they have the same kinds of issues as the SIP builds for the 7975g, there's no SCCP alternative to use..
Sreekanth
Thank you for suggesting a Skinny build.. That was about the only thing I didn't try. I am happy beyond belief that this is working so well now, even though the SIP builds should be just as well developed as the SCCP ones. -
How to check who locked the Tcode in SM01
Hi to all experts,
Is there a way to check who locked the Tcode in SM01 or in table TSTC?
Thanks in advance.
BR,
NancyDear Nancy,
Check the thread,
[sm01 transaction logs;
Regards, -
How to check the Lock Entries Dynamically
Hi
I have a list of Objects in an internal table and i want to know which one of these objects are locked by another users.
I am using SAP standard Lock object 'EPNODE' and its FM 'ENQUEUE_EPNODE ' to Lock the entries.
Please suggest how i can find among a list of objects, which one are locked.
Please suggest any transparent table which hold lock entries or any Function Module which check for lock entries.
Thanks in adavanceHi
Just double click on the FM, it will take you to SE37
click on IMPORT tab there you find import parameters against which there is the associated type
you need to declare your variables(parameteres) according to these associated types
whatever the FM it may be, the process is same
Hope this would solve your problem
Regards
Ramchander Rao.k -
How to check the locks in a table
Hi
Can any one tell me the commands to check the locks and get rid of the locks in a table.
Thanks and Reg
Debashisv$lock
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm#sthref764 -
How to check for locks on a table inside a program?
Hi Gurus,
Kindly let me know how to check for a lock on a particular table inside a program.I know that we can see locks on table held by a user from transaction SM12 but my requirement is to check for lock on MARA/MARC/MARV if lock exist then bypass my code else do the code.
Kindly suggest or give code to check for a lock on a particular table.
Thanks in advance
SudiptoFAQ. Locked.
-
How to check for locks on a material - without using Enqueue function
Hi
We have a requirement in which - we need to check the lock ( exclusive ) on a material before we call the BAPI to update the material.
I don't want to actually lock the material before calling the BAPI - the BAPI itself acquires the lock as a part of its processing. All I want to do is to check whether lock on a material exists before calling the BAPI - thus avoiding any lock related issues on the material in the BAPI call.
How do we just merely check whether material is locked - any standard function module /SAP tables where in material lock is stored that we use/interrogate ?
Correct answers will be promptly rewarded.Hi ,
There is standard function enqueue_read ,based on material number .
Pass the material number to FM ENQUEUE_READ if sy-subrc = 0 then material is locked otherwise not .
Please reward if useful. -
Check the lock or unlock of ip4
Hi you, I'm Dien and i come from Vietnam, i bought an old ip 4 from my friend but i don't know exactly it's lock or unlock version, pls check the IMEI number of it for me.
<Personal Information Edited by Host>The only reliable way to check the locked/unlocked status of any iPhone, if you don't know, is to call AppleCare. Apple maintains the database of officially unlocked iPhones.
-
When Convert, rendition checking and lock up
Hello Lady & Gentlman,
I`m looking for the method about one of convert work.
When convert, we can rendition check and after rendition checking. convert result file is upload the server or fixed drive.
Our customer want to only save in the fixed drive convert result file.
This mean is Client user not handling the rendition check box. and client user not shuld be able to save the convert result file in the local PC.
Here is
I`m find out the method How to do that renditon check and lock up.
And I need to advice and source code for this.
Please help me .
DJThe "Rendition" check box is enabled if connected to a DMS and DMS allows rendition of such format.
The rendition formats are requested from DMS using this property : Property.CSI_Renditions. -
I have a query as to how to check for blocking locks in the database. I am trying to check it from TOAD but the session of TOAD is hanging. I hope, my question is clear.
Please, help in solving the doubt.
regardsHi user574290,
Here is other script:
clear screen
set serveroutput on
BEGIN
dbms_output.enable(1000000);
for do_loop in (select session_id, a.object_id, xidsqn, oracle_username, b.owner owner,
b.object_name object_name, b.object_type object_type
FROM v$locked_object a, dba_objects b
WHERE xidsqn != 0
and b.object_id = a.object_id)
loop
dbms_output.put_line('.');
dbms_output.put_line('Blocking Session : '||do_loop.session_id);
dbms_output.put_line('Object (Owner/Name): '||do_loop.owner||'.'||do_loop.object_name);
dbms_output.put_line('Object Type : '||do_loop.object_type);
for next_loop in (select sid from v$lock
where id2 = do_loop.xidsqn
and sid != do_loop.session_id)
LOOP
dbms_output.put_line('Sessions being blocked : '||next_loop.sid);
end loop;
end loop;
END;
/Best Regards,
Francisco Munoz Alvarez
www.oraclenz.com -
I can not rotate my iPad and I have checked the lock button on the side. Any ideas
I can not rotate my iPad and I have checked the button on the side. Any ideas
Double-tap the home button and then swipe it to the right. Along with music and brightness controls, there will be a button with an arrow in a circle. If there's a lock in the middle, tap it.
-
Hi,
Is there any way to find out locks thru OEM.
RegardsYeah. Once you're in your main database page, scroll to the bottom, or search in the page for "Metric and Policy Settings". That page has a metric "Blocking Session". You can set a number against that and modify how often to check for it.
For me however it was more critical to find out "Blocked Sessions" rather than "blocking session" (1 session can block 10, or 20 other sessions). So I created a user-defined metric:
select count(*) from (select /*+ ORDERED */ blocked.inst_id ||'-'||blocked.sid blocked_sid , TRUNC(blocked.ctime/60) min_blocked from (select * from gv$lock where block != 0) blocker , gv$lock blocked where blocked.block = 0 and blocked.id1 = blocker.id1);
Hope it helps. -
LOCKS checking user locked and SQL that he is executing
Hello all,
I have this script that inserts into a table the user causing the lock and the users waiting for the lock to be released.
What I would like to add into this the script is the SQL string that the user causing the lock and the users waiting for the the lock to be released are executing.
Can you help me on this?
Script that I have now:
insert into dba.sessions_bloq
select sysdate "Data", w.sid "SID E", s1.username "User E", s1.osuser "OS User E", s1.machine "Maquina E", s1.program "Programa E", s1.logon_time "Logon E",
s.ksusenum "SID B", s2.username "User B", s2.osuser "OS User B", s2.machine "Maquina B", s2.program "Programa B", s2.logon_time "Logon B"
,decode(r.ksqrsidt,
''MR'', ''Media Recovery'',
''RT'', ''Redo Thread'',
''UN'', ''User Name'',
''TX'', ''Transaction'',
''TM'', ''DML'',
''UL'', ''PL/SQL User Lock'',
''DX'', ''Distributed Xaction'',
''CF'', ''Control File'',
''IS'', ''Instance State'',
''FS'', ''File Set'',
''IR'', ''Instance Recovery'',
''ST'', ''Disk Space Transaction'',
''TS'', ''Temp Segment'',
''IV'', ''Library Cache Invalidation'',
''LS'', ''Log Start or Switch'',
''RW'', ''Row Wait'',
''SQ'', ''Sequence Number'',
''TE'', ''Extend Table'',
''TT'', ''Temp Table'',
r.ksqrsidt) "Tipo Lock"
from gv$session_wait w, x$ksqrs r, gv$_lock l, x$ksuse s, gv$session s1, gv$session s2
where w.wait_Time = 0
and w.event = ''enqueue''
and r.ksqrsid1 = w.p2
and r.ksqrsid2 = w.p3
and r.ksqrsidt = chr(bitand(p1,-16777216)/16777215)||
chr(bitand(p1,16711680)/65535)
and l.block = 1
and l.saddr = s.addr
and l.raddr = r.addr
and s.inst_id = userenv(''Instance'')
and w.sid = s1.sid
and w.inst_id = s1.inst_id
and s.ksusenum = s2.sid
and s.inst_id = s2.inst_id;
Thanks in advanceYou can link to:
gv$sql
gv$sqltext_with_newlines
but, if doing this in a trigger, also look at these:
http://www.psoug.org/reference/system_events.html -
Loop - checking for lock to clear
My application uses tables that are refreshed from their sources. I have a table with a field in it that if set to "locked" (by an external process or another user of the application).
I set an item (P1_LOCK_STATUS) to the results of the select statement on the column. On pages where I am accessesing data, I redirect to a page that explains that the application is "locked".
This all seems to work.
What I want to do (and my reason for this thread) is to:
1) get the page go into some sort of a loop that reads the column to determine if it has changed to "unlocked".
2) While it's detecting whether the lock has changed, I'd like to have some movement on the screen to show that it is doing something.
Something graphical might be nice...
3) When it detects that it is unlocked, I'd like it to branch to the calling page or some other page.
Yep... I'm a newbie ;-) and this may be a stupid question, but I can't think of how to do this...
-ScottJust replace???
I'm writing an example code
char myArray[10] = {....}; //array populated;
char userItem = .....; //any character typed by the user
for (int i = 0; i < myArray.length; i++) {
if (myArray[i] == userItem) {
myArray[i] = userItem; //here occurs the replace
}I hope to help you
Junior -
Check activation lock status - stolen iPhone
I tried the service
https://www.icloud.com/activationlock/
with the imei number of my old stolen iphone4 that was ios 6.
The status now is Locked! This is possible only if the person that have NOW my iPhone (stolen 1,5 year ago) has upgraded to ios7.
Apple KNOW exactly the Apple ID associated to this IMEI, the ceck reveal that the IMEI is locked by an appleid...not hard to find...
Can i Have the apple ID associated to my iPhone?
No, it's not possible. Why? I have all the documentation about the IMEI and from the police.
The IMEI is associated to my wife's apple account in this moment waiting for "find my iPhone"...but with ios 6...no answears...the thief power off the device in 5 minutes after my first call...
I want my iPhone back, Apple Know the thief. What exactly the problem?
Marco.Yes. I did all. Everything goes normal but status is always on. I think my issue is related to this http://www.macrumors.com/2014/02/06/disable-find-my-iphone/
When I bought her iPad, it was 7.0.4. She didn't sign out of her account. I didn't remember how I could manage to delete her account.
Maybe you are looking for
-
Database open but no processes? Ghost instance?
10.2.0.3.0 RH 5 customer had been doing some SAN work and caused a database problem, listener wouldnt start. Got called to look at it. ok, lsnrctl status shows its up, I logged into database as sysdba query v$instance, all open and good. SQL> select
-
web page automatically loads up each time and the exist bottom is disabled on the screen.
-
We are using ISE 1.2. We have a requirement that the Guest when trying to access the Internet he is redirected to the Self Registration Page. Once he fills in the requisite details the request should go to any Approving Authority . Once he/she approv
-
2651 only rings half the time on call transfer
I have a 2561 with T1CAS. Incomming calls hit a call handler and are given the option to transfer direct to an extension. When the transfer occurs, The calling party only hears half of the rings. The called party hears them all. For example outside c
-
Hint : installing CRS on RHEL4 10.2 DB using Putty
If you run into the a problem running the installer - i.e. sequence too long , then this may be a bug in Putty. It only shows up if you are using Putty /SSH as an X-Tunnel to your client -e .g. Reflection, NCD X-Ware There's a bug in Putty 0.58 and b