"CHECK_CHANGED_DATA" WITHOUT
Hi abap gurus,
I am doing ALV grid with oops concept . I am not able to save the changes in the internl table using 'check_changed_data' using checkbox . It is giving following error :
Can anyone give me any clue ? Without using check box it is fine .
You attempted to access an unassigned field symbol
(data segment 32781).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
translate ls_cells_temp-value to upper case. "#EC TRANSLANG
assign ls_cells_temp-value to <l_currency>.
else.
assign ls_cells_temp-value to <l_currency>.
clear <l_currency>.
endif.
if <l_currency> is initial.
assign component ls_fieldcat-qfieldname
of structure <ls_wa> to <l_currency>.
endif.
if <l_currency> is initial.
assign ls_fieldcat-QUANTITY to <l_currency>.
if sy-subrc ne 0.
assign space to <l_currency>.
endif.
endif.
endif.
else.
if not ls_fieldcat-currency is initial.
assign ls_fieldcat-currency to <l_currency>.
elseif not ls_fieldcat-quantity is initial.
assign ls_fieldcat-quantity to <l_currency>.
else.
assign space to <l_currency>.
endif.
endif.
>>>>> call method me->formal_field_check_no_ddic
214 exporting
215 i_currency = <l_currency>
216 i_value = ls_cells-value
217 i_row_id = ls_cells-row_id
218 i_tabix = l_tabix
219 is_fieldcat = ls_fieldcat
220 importing
221 eflg_invalid = eflg_invalid
222 changing
223 c_field = <l_field>
224 ct_good_cells = et_good_cells
225 ct_mod_cells = et_mod_cells.
226 else.
227 *-- Formal field check with DDIC reference
228 call method me->formal_field_check_ddic
229 exporting
Yes i know is old post. but i want contribute with this thread.
i have a similar dump, and YES my problem was on fieldcat.
curious, changed this line:
ws_gt_fieldcat-fieldname = 'Selection'.
by this:
ws_gt_fieldcat-fieldname = 'SELECTION'.
(see Uppercase).
and voila!!!! worked....
thanks!!!
Similar Messages
-
Cl_gui_alv_grid-check_changed_data issue
Hello,
I am using method "cl_gui_alv_grid->check_changed_data" in an editable ALV program like this.
module user_command_0100 input.
data: l_valid type c.
case ok_code.
when 'EDIT'.
call method plan_grid->check_changed_data
importing e_valid = l_valid.
if l_valid = 'X'.
perform update_data.
endif.
The issue is, even if no records were changed on the ALV output, the method is returning l_valid = 'X'.
Can I use l_valid as a flag to determine the data was changed?
Thanks.
Edited by: ravi kumar on Dec 17, 2009 12:35 PMI think that the method tells you if there is any error on your ALV so you can save it without problems...remember that you can control errors when a particular field has changed.
In that case, the 'l_valid" is not a "true" flag for finding out if the data was changed or not but it is for determining if there are any errors or not. -
OO ALV validation check without event DATA_CHANGED and results via popup
Hi Gurus,
I'm working on SAP ECC 6.0 and I'm facing a problem during the ALV validation check. My requirement is to show an ALV with one editable field. In addition I have to pre-initialize this field in order to give a reference value to the user, but this is not always correct, or better, this field represent the maximum amount available, but, because of other validation checks, this field is not always correct (and it's ok, it's not a problem), and if it is greater than another amount I have to display an error.
I was thinking about catching the event DATA_CHANGED and do the checks inside of it. It works but not completely, because if the user do not change anything the event is not raised and I cannot do my checks.
My solution is to do the checks without catching the DATA_CHANGED event and display the errors in a separate popup window.
The checks are ok, but I have problems during the displaying of the results: I would like to use the class CL_ALV_CHANGED_DATA_PROTOCOL in order to display the errors, I tried creating the Object:
Data: go_Error Type Ref To CL_ALV_CHANGED_DATA_PROTOCOL.
Create Object go_Error
Exporting
* i_container =
i_calling_alv = go_0200_Alv
giving it a reference to the ALV (the go_0200_Alv is my CL_GUI_ALV_GRID object).
Then I did many Call Methods to the Add_Protocol_Entry to add the message in the protocol and then display them calling the Display_Protocol Method of my "go_Error".
The Popup is shown and the "links" to the ALV are correct (if I double click a message it selects the corresponding row of the ALV, but (and it's my problem) I cannot see the Description of the Column with the error: the popup window is an ALV grid itself with 3 columns ("Message Type", "Name of the Column" and "Message Text") where I can see correctly the Message Type and the Message Text but not the name of the column.
Debugging the code I found that If I catch the event, the parameter er_Data_Changed (the class CL_ALV_CHANGED_DATA_PROTOCOL) is filled with some other informations like Modified Rows and other attributes like FieldCatalog, Row-ID, so I thought the problem was related to that, and that's why I replicated the whole case in my processing, filling every table I would see if I use the "standard way" for validation. Bu it didn't correct the error. I still don't see the name of the Column.
This is my code, it's only the part interested, If you need other informations, please ask me and I will copy them.
form CHECK_ALV_0200_0110 Changing pc_Error Type Char01.
Data: lt_MatchK1 Type tp_Matches1_Key_t,
l_Message Type Char100,
l_MessX Type String,
l_QtaRes Type ZDM_AMT_ASSIGNED,
l_QtaAcc Type ZDM_AMT_ACCRUED,
l_QtaStep Type ZDM_AMT_ASSIGNED.
Field-Symbols: <fs_Table> Type Standard Table,
<fs_Master> Type Standard Table,
<fs_Mod_Cell> Type LVC_S_MODI,
<fs_Line> Type Any,
<fs_Field> Type Any,
<fs_Any> Type Any.
Data lt_Matches_Alv_Mod Type tp_Matches1_Alv_t.
Data ls_Modi Type LVC_S_MODI.
Data: l_Row_ID Type I,
l_Tabix Type I.
Field-Symbols: <fs_Match_ALV> Type tp_Matches1_Alv_s.
Free go_Error.
CREATE OBJECT go_Error
EXPORTING
* i_container =
i_calling_alv = go_0200_Alv
* Validation Checks
Clear pc_Error.
Clear ls_Modi.
Loop At gt_Matches1_Alv Assigning <fs_Match_ALV>.
l_Tabix = Sy-Tabix.
Check <fs_Match_ALV>-Status Eq con_Status_Temp.
* Set the Modified Row for the CL_ALV_CHANGED_DATA_PROTOCOL object
Append <fs_Match_ALV> To lt_Matches_Alv_Mod.
Add 1 To ls_Modi-Row_Id.
ls_Modi-FieldName = 'AMT_DEDUCTED'.
Write <fs_Match_ALV>-Amt_Deducted To ls_Modi-Value Currency <fs_Match_ALV>-Waers.
Condense ls_Modi-Value No-Gaps.
ls_Modi-Tabix = l_Tabix.
Append ls_Modi To: go_Error->mt_Mod_Cells,
go_Error->mt_Good_Cells.
l_Row_ID = ls_Modi-Row_Id.
Clear l_Message.
If <fs_Match_ALV>-Amt_Deducted Eq 0.
pc_Error = con_X.
CALL METHOD go_Error->Add_Protocol_Entry
EXPORTING
i_msgid = 'ZDMV'
i_msgty = 'E'
i_msgno = '005'
* i_msgv1 =
* i_msgv2 =
* i_msgv3 =
* i_msgv4 =
i_fieldname = 'AMT_DEDUCTED'
i_row_id = l_Row_ID
* i_tabix =
Continue.
EndIf.
Case g_Dynnr.
When '0110'.
Perform Get_ResQtaDispute1 Using lt_MatchK1
<fs_Match_ALV>
Changing l_QtaRes.
Perform Get_ResQtaAccrued1 Using <fs_Match_ALV>
Changing l_QtaAcc.
* When '0111'.
* Perform Get_ResQtaDispute2 Using lt_MatchK2
* <fs_Match_ALV>
* Changing l_QtaRes.
* Perform Get_ResQtaAccrued2 Using <fs_Match_ALV>
* Changing l_QtaAcc.
EndCase.
Add <fs_Match_ALV>-Amt_Deducted To l_QtaStep.
If l_QtaStep > l_QtaRes.
* Store the Error
pc_Error = con_X.
Write l_QtaRes To l_Message Currency <fs_Match_ALV>-Waers.
Condense l_Message No-Gaps.
CALL METHOD go_Error->Add_Protocol_Entry
EXPORTING
i_msgid = 'ZDMV'
i_msgty = 'E'
i_msgno = '002'
i_msgv1 = l_Message
* i_msgv2 =
* i_msgv3 =
* i_msgv4 =
i_fieldname = 'AMT_DEDUCTED'
i_row_id = l_Row_ID
* i_tabix =
EndIf.
If l_QtaStep > l_QtaAcc.
* Store the Error
pc_Error = con_X.
Write l_QtaAcc To l_Message Currency <fs_Match_ALV>-Waers.
Condense l_Message No-Gaps.
CALL METHOD go_Error->Add_Protocol_Entry
EXPORTING
i_msgid = 'ZDMV'
i_msgty = 'E'
i_msgno = '002'
i_msgv1 = l_Message
* i_msgv2 =
* i_msgv3 =
* i_msgv4 =
i_fieldname = 'AMT_DEDUCTED'
i_row_id = l_Row_ID
* i_tabix =
EndIf.
EndLoop.
If pc_Error Eq con_X.
* If there was at least one error, Display the Popup
go_Error->mt_FieldCatalog[] = gt_0200_FCat[].
go_Error->ms_Layout-Zebra = con_X.
Get Reference Of lt_Matches_Alv_Mod[] Into go_Error->Mp_Mod_Rows.
CALL METHOD go_error->display_protocol
* EXPORTING
* i_container =
* i_display_toolbar =
* i_optimize_columns =
EndIf.
EndForm.
Do you know if there is a particular issue about that? Or, maybe, I'm doing something wrong...
Please help me
Regards,
Claudio
Edited by: Claudio Distrutti on Oct 31, 2008 12:38 PMHello Claudio
Nobody prevents you from calling your event handler method go_grid->HANDLE_DATA_CHANGED directly!
What do I mean with that?
I assume you are calling method go_grid->CHECK_CHANGED_DATA at the beginning of the PAI module to catch any changes from the editable ALV grid. Within the event handler method you do your validation and send the error popup if necessary.
Now when the user closes the error popup and pushes e.g. the SAVE button then I can happen that method HANDLE_DATA_CHANGED does not trigger event DATA_CHANGED because nothing was indeed changed on the ALV grid. Yet the invalid value is still there.
However within the FORM routine for saving the data you can just call your event handler method directly:
FORM save_data.
CALL METHOD go_grid->handle_data_changed
EXPORTING
* er_data_changed =
e_ucomm = 'SAVE'.
ENDFORM.
Now within your event handler method you always know when the method was called because if method CHECK_CHANGED_DATA triggers event DATA_CHANGED the IMPORTING parameter ER_DATA_CHANGED is bound whereas it is empty when the method is called from your SAVE routine.
METHOD handle_data_changed.
DATA: lo_log TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
IF ( er_data_changed IS BOUND ).
lo_log = er_data_changed.
ELSE.
CREATE OBJECT lo_log.
ENDIF.
" Do the validations and send error log if necessary
lo_log->DISPLAY_PROTOCOL( ).
ENDMETHOD.
Regards
Uwe -
Hiding information message without modification
Hi,
Is there any way from which i can hide an information message in trasaction without modifying the program.
Thanks,MODULE m_pai INPUT.
CASE fcode.
WHEN 'ENT'.
PERFORM f_force_enter.
LOOP AT git_tab INTO gwa_tab.
PERFORM f_update_it9090 USING l_tabix.
ENDLOOP.
ENDCASE.
CLEAR fcode.
ENDMODULE.
FORM f_update_it9090 USING fu_tabix.
PERFORM f_read_9090 TABLES lit_p9090 USING fu_tab CHANGING lwa_p9090.
IF lwa_p9090-pernr IS NOT INITIAL.
ELSE.
CONCATENATE fu_tab-pernr text-014 '.' INTO l_text SEPARATED BY space.
<b>MESSAGE i004 WITH l_text.</b>
g_final_flag = 'X'.
ENDIF.
ENDFORM.
FORM f_force_enter.
CALL METHOD g_alv->check_changed_data
IMPORTING
e_valid = g_valid.
ENDFORM.
Therefore, when this code is run the statement highlighted in BOLD behaves differently when 'Enter' is strike before save and when 'Enter' is not strike before save. The f_force_enter subroutine is invoke to cause data_changed method to be invoke to capture relevant data before proceeding to other processing. -
Check modified cells without "ENTER"
Hello togehter,
i have a problem: I set up an alv-grid with editable cells. I also venen registered the edit-event! So when i modify values in my grid-control and press Enter, the internal table is correctly filled with the new, just now modified, values. So i need this functionality (i can't get it with the debugger) for an own-created button. This button can be pressed/clicked without pressing an Enter. When i click this button (without previous ENTER-click) my report checks the handler-method "on_data_changed" and execute a perform where is just check/modify the internal table, like:
LOOP AT alv_itab INTO wa.
MODIFY alv_itab FROM wa.
ENDLOOP.
How can i get the same functionality for directly clicking any own-created button without an ENTER.
Hope you can help me,
THXHi Marcel,
try to call the method Check_Changed_Data of your ALV Grid in the PAI (or when you catch the event for your button) like this:
Clear g_ALV_Check.
CALL METHOD go_0200_alv->check_changed_data
IMPORTING
e_valid = g_ALV_Check.
it will raise (if there are modified cells) the event DATA_CHANGED and activate your method handler, if there are no modified cells it will adjust your internal table with the new values (and set the e_valid = 'X'). In case of any errors in the modified cells you will have a popup window displaying them and the return value e_valid is set to ' '.
Greetings,
Claudio -
New DC without netlogon share is not working.
Hello all,
I have a brand new DC (server 2012) that I joined to my domain and it is not behaving. It is a clean install plus the directory services role, the static IP and the promotion, nothing else. The domain has one more DC (server 2012) and it is functioning
properly. The DNS servers of the new DC are the working DC and 127.0.0.1 as secondary. The time is the same, the name is new on a new install of windows (no images, no cloning, no restores). The promotion completed successfully with the initial replication
(it said).
Here is the output of dcdiag:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = IL-DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\IL-DC2
Starting test: Connectivity
......................... IL-DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\IL-DC2
Starting test: Advertising
Warning: DsGetDcName returned information for \\MD-DC.mydomain.com, when we were trying to reach IL-DC2.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... IL-DC2 failed test Advertising
Starting test: FrsEvent
......................... IL-DC2 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL
replication problems may cause Group Policy problems.
......................... IL-DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... IL-DC2 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000481
Time Generated: 03/06/2014 05:07:50
Event String: Internal event: The following schema class has a superclass that is not valid.
A warning event occurred. EventID: 0x80000481
Time Generated: 03/06/2014 05:07:50
Event String: Internal event: The following schema class has a superclass that is not valid.
A warning event occurred. EventID: 0x80000481
Time Generated: 03/06/2014 05:07:50
Event String: Internal event: The following schema class has a superclass that is not valid.
A warning event occurred. EventID: 0x80000B46
Time Generated: 03/06/2014 05:09:43
Event String:
The security of this directory server can be significantly enhanced by configuring the server to reject SASL
(Negotiate, Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple
binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
......................... IL-DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... IL-DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... IL-DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... IL-DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\IL-DC2\netlogon)
[IL-DC2] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
......................... IL-DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... IL-DC2 passed test ObjectsReplicated
Starting test: Replications
......................... IL-DC2 passed test Replications
Starting test: RidManager
......................... IL-DC2 passed test RidManager
Starting test: Services
......................... IL-DC2 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/06/2014 04:20:58
Event String: The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/06/2014 04:50:41
Event String:
Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers r
esponded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/06/2014 04:50:41
Event String:
Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers r
esponded.
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/06/2014 04:51:32
Event String: The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0x00001001
Time Generated: 03/06/2014 04:56:46
Event String:
The machine IL-DC2 attempted to join the domain mydomain.com but failed. The error code was 1332.
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/06/2014 04:58:07
Event String: The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0x0000271A
Time Generated: 03/06/2014 04:58:06
Event String:
The server {9BA05972-F6A8-11CF-A442-00A0C90A8F39} did not register with DCOM within the required timeout.
A warning event occurred. EventID: 0x00001796
Time Generated: 03/06/2014 04:59:21
Event String:
Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and t
his server. This event occurs once per boot of the server on the first time a client uses NTLM with this server.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:00:09
Event String:
Driver HP Universal Printing PCL 6 required for printer HP Universal Printing PCL 6 is unknown. Contact the
administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:00:09
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact t
he administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:00:12
Event String:
Driver HP Universal Printing PCL 6 required for printer HP Color LaserJet CM1312nfi MFP (192.168.2.20) is un
known. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:00:12
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft XPS Document Writer is unknown. Contact
the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:00:13
Event String:
Driver PrimoPDF required for printer PrimoPDF is unknown. Contact the administrator to install the driver be
fore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:00:13
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the
administrator to install the driver before you log in again.
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/06/2014 05:08:51
Event String: The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x00001796
Time Generated: 03/06/2014 05:12:17
Event String:
Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and t
his server. This event occurs once per boot of the server on the first time a client uses NTLM with this server.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:13:02
Event String:
Driver HP Universal Printing PCL 6 required for printer HP Universal Printing PCL 6 is unknown. Contact the
administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:13:02
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft XPS Document Writer is unknown. Contact
the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:13:03
Event String:
Driver HP Universal Printing PCL 6 required for printer HP Color LaserJet CM1312nfi MFP (192.168.2.20) is un
known. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:13:04
Event String:
Driver PrimoPDF required for printer PrimoPDF is unknown. Contact the administrator to install the driver be
fore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:13:04
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact t
he administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 05:13:05
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the
administrator to install the driver before you log in again.
......................... IL-DC2 failed test SystemLog
Starting test: VerifyReferences
......................... IL-DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : mydomain
Starting test: CheckSDRefDom
......................... mydomain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... mydomain passed test CrossRefValidation
Running enterprise tests on : mydomain.com
Starting test: LocatorCheck
......................... mydomain.com passed test LocatorCheck
Starting test: Intersite
......................... mydomain.com passed test Intersite
I also have the following event:
Log Name: System
Source: NetJoin
Date: 3/6/2014 4:56:46 AM
Event ID: 4097
Task Category: None
Level: Error
Keywords:
User: S-1-5-21-1062633599-3710215183-3313947919-500
Computer: IL-DC2
Description:
The machine IL-DC2 attempted to join the domain mydomain.com but failed. The error code was 1332.
Although the machine joined the domain, it is listed with the appropriate records and promoted.
Can anybody help me get a second DC for this domain running? It is kind of urgent... I tried demoting/promoting, reinstalling, I tried to do a non-authoritative restore, however, I don't have the appropriate registry key... I saw the various different posts
on similar issues, please do not paste them as I read them and I was not able to solve this.
Thank you in advance for any responses!
Best regards,
IrinaUmar,
Thank you big time for your time and help today. After we finished talking I tried the authoritative restore (vs non-authoritative the first time - didn't help) and then I started over (one more time) and created one more DC. Before promoting it I disabled
the firewall and the user control in order to make sure nothing is stopping it. I also triple checked the time. I promoted it without the DNS server and Global Catalog functions. I faced the same wall. After the promotion the SYSVOL and NETLOGON shares were
still not there.
After hours of more reading I finally found this:
http://social.technet.microsoft.com/Forums/en-US/58b8cdc3-a990-46c7-a70e-a51fd6965537/sysvol-and-netlogon-shares-missing-from-new-domain-controllers-using-dfrs?forum=windowsserverpreview
and it saved me. So I followed this guy's steps and my system shares showed up on both new DCs. Then I had to wait one more hour for everything to get in sync and after that I successfully shut down my main DC and the other two took over.
Thank you again for the help!
Best regards,
Irina -
View data in client B from client A in the same SID without a valid logon?
Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan -
SSO to ECC (without java stack), BI (on NetWeaver), & Portal
I have a client that wants to configure their SAP systems in such a way so that the users sign onto their Windows workstations, are authenticated by Windows Active Directory and from then on they can sign on directly to an ECC ABAP instance, a BI instance, and an SAP Portal without having to supply a user/password combination again. (We already have SSO setup for users access some BI reports through the Portal, but in this case we want to setup direct access to the ECC and BI systems without necessarily going through the Portal environment).
The servers are running HP-UX, the clients Windows XP, and the AD system is running under Windows 2003.
Is this possible without using a third-party tool and if so,can anyone point me to the appropriate documentation (I've done a lot of searching, but can't find anything).
Thanks in advance!I am sure this has been done before and often discussed here?
Take a look in the FAQ thread at the top of the forum for a general overview discussion of SSO. If you keep an eye out for the note numbers, terms used and those folks who contributed to it when searching, then I am sure will find plenty of infos to start with.
Specific vendor evaluation details and comparisons (outside of the technical realm) are generally not provided, as the 3rd parties are generally competitors...
Cheers,
Julius -
OBIEE 11g - without going to Sawbridge first.....
If you called OBIEE via the default path: http://domain-name/analytics?NQuser=xxx&NQpassword=xxxx
instead of
http://domain-name/analytics/saw.dll?NQzuser=xxx&NQpassword=xxxx
would your credentials be checked by weblogic before the default login jsp has access to the request parameters or after?
Or does weblogic/OBIEE stop you passing parameters to the default URL?
What I'm trying to say is, if you go via the default domain without calling saw.dll first can you pass an encrypted password to your bespoke login.jsp (default.jsp) within the analytics domain and get this default.jsp
to convert the password to plain text and then this default.jsp calls (forwards) to saw.dll....I have been trying to log in with my YouTube account name and password like usual. I just tried using my gmail log in and it works. Did they merge or something? It was working yesterday just fine without me changing the way I logged in. Either way, thanks for the help! Works great now
Message was edited by: EvoXFTW -
Edit and output video without modifying any pixels?
That subject line sounds cryptic, I'm sure, but I need to assemble numerous snippets of animated pixel art into what should become a somewhat lengthy animation. Final Cut should perform no internal resizing and no compression prior to output; all input files are 240x160 without exception. Stills are PNG to take advantage of the Alpha channel, but the animated clips are uncompressed QuickTime with a single, unique RGB value reserved for the background for chroma-keying (all layering is to be all-or-nothing with regard to the Alpha/keying; there is no partial transparency at play).
All I need is to compile these clips together, layer a few elements on top of each other, and tweak the timing here and there. Beyond that, Final Cut should leave everything exactly like it found it, down to the pixel. (I'll worry about the output format and compression later.)
Is this possible (and easy) in Final Cut Express? In my disastrous trials with Adobe Premiere Elements (v.1), Premiere insisted on internally resizing the clips for editing, which fuzzed up the images and defeated the chroma keying (as if the fuzziness wasn't bothersome enough). It's possible this was due to user error, but as far as I can tell, nothing can prevent Premiere from reprocessing everything into its native DV dimensions, which is quite destructive toward pixel art. Anyway, I'm frustrated enough with Premiere that I'm willing to purchase Final Cut, if it can meet these requirements easily.
Thanks much for any information you can provide. Oh, and if Final Cut could possibly output the entire sequence as an animated GIF, that'd be fantastic, but I tend to think it'd be a little too heavy-handed (even though my total palette is well below 256 colors) because it's used to crunching fancy true-color videos instead of this basic pixel art.After some further research, it seems my best approach for this project will be to compose my small QuickTime clips with all layering done beforehand, then assemble them with a utility such as QuickTime Pro or MPEG Streamclip, as discussed here:
http://discussions.apple.com/thread.jspa?messageID=7813920�
MPEG Streamclip, in fact, seems to work quite well in my initial tests. If the clips are numbered sequentially, dropping them into the application assembles them beautifully. And it's free!
Thanks again to those who replied. -
Hi,
I have an issue in prodution system, there is a sales order created in 2008 without division (I dont know how the system allowed), this sale order is created with reference to a contract, and the contrct is having division. And now users want to close the sale order. When i am trying to open sale order in VA02 / VA03, it is giving error mesage " Sales area 1000 10 is not defined". Now I am unable to open the order.
Pls anybody suggest me how to close this order??
How system will allow to create a sale order without delivery??
Regards,
SrikanthHi,
I can see a way by which this could have happened.
Initially there was a sales area called 1000/10/00. For tihs sales area, some transactions were created. After sometime, by mistake or intentionally the assignment of this sales area is deleted in configuration. If this is done, it will affect the documents in retrospect and all those documents cannot be processed from then onwards. There is a possibility that this has happened in your case.
Check some other sales orders for the sales org 1000 created in 2008 and you are bound to get this error. If you realise that there are lot of documents affected because of this, please check the change logs in the sales area configuration and find out when was the sales area dimantled in the system. There can be some business reason behind this. Find out the business reason, tell them implication of removing the sales area, do the configuration once again and rectify the affected documents once again by means of a Zprogram.
Please check initially what is said, and let me know if you need more information on this -
Open discoverer report in new browser window and without connections page
Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advanceClosing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing. -
Activity Report download is saved without extension and unreadable
Hello,
The Portal Activity Report iView has a button which enables the user to download the report to his PC.
The problem is that when the user clicks on that button and saves the file it is being saved by this default name: com.sap.portal.activityreport.frontend.DownloadableActivityReport
The main problem is that it is being saved by default without any extension and after saving the user needs to manually add the .xls suffix.
Another problem is that once I open the report with Excel The Object Name column is unreadable.
Is there any way to resolve these issues?
RoyHi Roy,
> if it wasn't supported there
> or you would still consider it as a bug?
The feature in general of course was supported, but what I cannot say is if it was a known issue that it didn't work correctly. As I dont't use the ActivityReport, I also have no experience if it didn't work at some time and maybe now is working.
The wrong filename I don't expect to be corrected in the meanwhile, as said, that's a problem in some places. So at least for this you could open an OSS message. And maybe combine this with the problematic column issue.
But if upgrading to SP18 would be an option for you, maybe you could first test that.
Hope it helps
Detlev -
Can we change billing doc without cancelling( excise invoice is subsequent)
Dear all,
Here is a urgent issue
One Excise invoice has been created with reference to a billing document
and we have not maintained tax code in that condition records so it is not allowing to release the doc for accounting entries
now my requirement is without cancelling the excise invoice and also not to do transaction J1ih,( to create excise JV for direct GL entries
i want to change the billing document
Thanks in advancehave not maintained tax code in that condition records
While it is not necessary to reverse the excise invoice, the fact is that since tax code was not flowing in billing document, I am sure, excise duty would also not be flowing, in which case, your excise invoice is also generated for wrong value.
I would be surprised if you say that excise values are flowing in billing document and also in excise invoice and if your issue is only tax, then as already suggested, maintain a condition record (with the date in line with pricing date in billing document) and try.
G. Lakshmipathi -
Proforma invoice is created for delivery without PGI in STO(Depot sales)
Dear Gurus,
I am facing a strange issue, user created Purchase order with some material X of 4 quantity, and he created the replenishment delivery for 1 quantity and without doing any Picking and PGI but system allowed to create proforma invoice with 4 quantity I checked the copy control config settings for Delivery and Proforma invoice all are maintained fine (viz., billing qty as D, copying req:311 and Data VBRK\VBRP:001)( Ichecked the change log for delivery but I didnt observed any chanes in delivery) .. strange to watch ........created the same scenario in quality but system doesnt allowed to create proforma invoice without PGI and picking(Just one month before quality is refreshed with Production).
If anyone faced the same problem let me konw the solution ate the earliest.
Best Regards,
Kishore.SGRHi
As already said, as per the standard the Performa Invoice do not check the Goods Issue status of a Delivery since it uses the Copying Requirement 009 in transaction VTFL.
If you want your performa invoice to be created only after the PGI of a delivery, then use the Requirement 003 in Copying Requirement field for the combination of your Delivery Doc. and Billing doc. in transaction VTFL at Header level.
Regards
Amitesh Anand
Maybe you are looking for
-
Sony mobile warranty support feedback
I need to share with you that recently my phone went back from warranty repair. And I need to say I can see a huge upgrade in terms of the service and customer support. Everything went well and the most important - very fast! As I remember from the
-
Google Maps for Flash in AIR for Android: ~2 minutes to start up
I have a "Hello World" style AIR for Android app using Flash Builder 4 Burrito/Flex Hero. When debugging on device (stock HTC Desire) using Flex version v1.20 of Google Maps for Flash (map_flex_1_20.swc), it takes 1 minute and 50 seconds for the app
-
Functions of PA-OM & Time Management
dear friends Can some body tell me what are the functions of PA - Om and Time managment and recrutiment All Functions which fall under this catageorgy Thanks in Advance Zuben
-
7.1 EAS server crashing after using migration wizard
We have 7.1 Essbase installed with EAS running on a Unix box and the Essbase server running on NT. If we use the migration wizard the EAS server crashes after the migration has run. Has anyone else experienced similar problems ?
-
Yahoo Instant Messenger buggy on build 1.3.5.1
I noticed that when using yahoo instant messenger you get signed out alot and sometimes you cant send messages. The messages will say failed to "whomever" with a yellow triangle and !. However I have noticed the issues with wifi on and 3g signal is