Check complete. The overall result of this check is: Failed ASM ins

Need steps to clean that plz
Check complete. The overall result of this check is: Failed <<<<
Problem: The installer has detected that you may have an Automatic Storage Management (ASM) instance improperly configured or one that was not properly cleaned up from a previous install.
Recommendation: You must completely remove the ASM instance by deleting the entry for it from the oratab file, or you must configure it properly by ensuring that the oratab file is updated to point to a valid Oracle Home where ASM is configured.
========================================================

Either remove the line in the /etc/oratab file for the ASM instance, or add it if it is missing.
The file shows the proper format of the line.

Similar Messages

I had bought a Mac PRE 13 in, in 7th Sep,but it is 15th Sep today,how doesn't my computer come to me? So,how can I check where the computer is at this moment?

I had bought a Mac PRE 13 in, in 7th Sep in the online Apple Store,
but it is 15th Sep today,how doesn't my computer come to me yet?
So,how can I check where the computer is at this moment?

Call the online Apple Store. You should have received an email with a FedEx tracking # if you are in the US.
There is nothing anyone can do for you on a message board! We are all end users just like yourself.

The overall result shows * instead of the value

Dear Experts,
In my report i've qty in columns and item in rows. The qty is in all Ea. (Each). So when i run the report i thought all the noumber would be added for qty and displayed in the overall result.
But in the overall result it shows a * . However in the formula bar in excel it displays a number like 44000.
I tried using nodim() and it worked, but my question is since the qty is in all Ea.'s shouldnt it add up the value to be displayed in the overall result.
Can someone shed some light.
Thank you...

No Jr., i dont any record with a blank value.
Wond, i agree with you. I thought i should see the total since all the items are in Ea.
Is there anything else i can check.

Issue in the Overall Result

Dear Experts
I need your help to solve my problem. I have one BEx report base on a cube and in which I use Key Figure calculated, but when I execute the query, I have on the Overall Result line the result of the formula and not the total result of all items. To illustrate, I have a column with an exchange rate calculated and another column with a Net Value calculated with this exchange rate. If I run the query by displaying all the items, the result is correct, but when I display only the total, instead of the sum of all items, I have the total recalculated with the formulas. How to solve this problem?
Thx in advance for your help!

what i understand from your comment is irrespective of whether your drill down via items in report
the calcuation ( exchange rate and netvalue should happen at each item level and aggregation .
am i right???
if yes then you need to create a formula variable on sales doc number and another one on sales item no.
definition of formula variable would be replacement path on corresponding infoobject mentioned above.
and attribute value constant 1.
mulitply both the formula variable in your CKF netvalue .
calculation would always happen at sales doc item level and then aggregation .
another option is to use exception aggregation .

Using javascript to change the "Overall Result" cell in WAD

Hi experts,
I am trying to use javascript to change the text of the "Overall Result" cell in my web template using BI 7.0. I am not familiar with javascript, but I this is what I have done so far.
I dragged the web item "Script" into my web template and I inserted the following code:
function change_overall_result_to_average() {
var cell = document.getElementsByTagName("TD");
var cellText;
for (i = 0; i < cell.length; i++)
 cellText = cell.innerText;
 if (cellText == "Overall Result")
 cell.innerText = "Average";
In the XHTML view I am using added the onload function to start the javascript every time the web template is loaded. The code works fine when the web template is first loaded and the cell text is changed to "Average". However, if I navigate in my web template, the javascript function is not triggered, and the cell is therefore changed back to "Overall Result". For example, this happens when I pick another selection from one of my dropdown boxes, such as changing the selection from year 2008 to year 2007.
I don't really know how to solve this problem in an easy way, and the current solution is not good enough. I hope one of you guys can suggest an easy way of fixing this:-)
Best Regards,
Morten

Woodstock apparently renders some Javascript/DOM with some homegrown widget framework which on its turn renders the HTML DOM tree instead of plain vanilla HTML. Correct me if I'm wrong, to confirm this, just view the generated HTML source of the page.
After some Googling I found out that you need getProps() and setProps() to get and set element attributes respectively.
[http://google.com/search?q=webuijsf+domnode+site:sun.com].
If you stucks with this, I recommend you to post this question at a forum or mailinglist devoted to Woodstock, e.g at their own homepage at dev.java.net or the Netbeans forum at nabble.com. You're here at a Sun JSF forum, not at a Woodstock forum.

Problem in positioning of the Overall Result Row when using a hierarchy

Hello All,
i've built a query on a hierarchy and i want the 'Overall Result' to be displayed at the bottom.
I've made the following setting in the Query Designer
Query Properties -> Display -> Results Position -> Bottom/Right
but still, the 'Overall Result' is displayed at the top of the result rows.
Could some one please tell me if this is how the functionality is expected to work when a hierarchy is used for display ?
We are on BW3.1 SP 9
Best Regards,
Sanjay

Hi Roberto,
could you please let me know if the following analysis of mine is correct.
The Overall Result will be dispalyed at the top if the 'Position of Lower-Level Nodes' is set to 'Down'(default setting) in the Hierarchy Properties of
the characteristic. If the 'Overall Result' is required to be at the bottom then 'Position of Lower-Level Nodes' has to be set to 'Up'. It is not possible to display the Overall Result at the bottom with the 'Position of Lower-Level Nodes' set to 'Down'
Will greatly appreciate your help !
Best Regards,
Sanjay

Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all plug-ins, and I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all Firefox plug-ins, but I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

How to get the Overall result and Avg in Query

Hi
I am facing a problem to find Overall result and Avg for the keyfigure.
Here is the scenario.
I have a fiscalperiod ,qty in query column and material in row, when user enters the fiscalperiod(004.2006 to 006.2006)
the output should come as
   0406 0506 0606 Avg
M1 10 20   40     35
M2 20 40   30     45
res 30 60 70
i can able to get the overall result not avg,
if i change the properities of keyfigure 'Calicuate Result as 'Average of all values'',then i am loosing the overall result.
eitherway i can able to get one result,not both.
anybody can help.
Thanks
Madhu

You have 2 key figures and you have put Material in the ROWS.
Remove Material from ROWS and instead use 0FISCYEAR in the row selection.
You can create 12 Key figures for each month and use either Filer or Free Characteristic using 0CALMONTH to restrict the month for the selection Variable.
For the Key Figures use "Calculate Single Value as" Average.
Create another formula as KF1KF2....+KF12 to get the sum of average.
Regs
Gopi
Assign points if it helps...

Supress the "Overall Result" in the Query

Hi,
Is there a way of supressing the overall result in the query? I do know that i can supress results by characteristics, but I would like to supress the results on a query level.
Thanks

Hi Davy,
Select all the characteristics and supress the result for all of them.
Regards,
Diego

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

RE: Downloading and updating apps. I log in correctly and agree as required; but immediately I am timed out and cannot complete the update or download. Checked on my PC, my password is correct.

Re: Downloading and updating apps. I log in correctly and agree as required. But before a download happens i get a message "session timed out" and I cannot complete the download. This happens in a matter of seconds. Anyone?

Have you checked to see if you credit card is out of date? You may need to update your credit card on file.......

BACKUP failed to complete the command BACKUP DATABASE. Check the backup application log for detailed messages.

Hi,
We have a back up that is failing.
The error is "BACKUP failed to complete the command BACKUP DATABASE RPS. Check the backup application log for detailed messages.".
As I understand it the backup application log is at C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\LOG. From that all I get is
2014-03-05 14:49:29.41 Backup Error: 3041, Severity: 16, State: 1.
2014-03-05 14:49:29.41 Backup BACKUP failed to complete the command BACKUP DATABASE myDb. Check the backup application log for detailed messages.
The command I am using is
BACKUP DATABASE [MyDb]
TO DISK = N'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, NAME = N'mydb-Full Database Backup', SKIP, NOREWIND, NOUNLOAD, STATS = 10
GO
The database is Microsoft SQL Server Standard Edition (64-bit) Version 9.00.1399.06.
The computer is Windows server 2003 R2 Standard Edition SP2
The Db is 191 Gb and there is 227 Gb available on the D drive where it's being backed up to.
Any thoughts as to how I can track down the problem.
Is the 227Gb of spare disk space big enough to back up a 191 Gb database?
If not how much is needed?
Thanks

Hello,
Can you apply latest service pack .I dont know but guess that can be issue.Once faced ,not quite sure.Also can you just make your command like
BACKUP DATABASE [MyDb]
TO DISK = 'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, STATS = 10
GO
Just a simple one .Is backup failing immediately or after some time .Error is not so helpful as it does not shows any information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Do not display the overall result for one KF

Hi,
Question is in the title, here is an explanation of what I want to get with a simple BEx query (without adding extra vba)
2 KF : KF1 and KF2
2 Caracteristics : let's say 0PLANT and 0CALMONTH
0CALMONTH is displayed in line, 0PLANT in column
                     overall result    1701    1709    1710
0calmonth        KF1               KF2      KF2     KF2
01.2009           xxx               xxx       xxx     xxx
02.2009           xxx               xxx       xxx     xxx
03.2009           xxx               xxx       xxx     xxx
Basically what I want is to KF1 only for the aggregation of all plants and I want to display KF2 for each plant
Do you think this is possible ?
For now I only succeed in getting
                     overall result    1701    1709    1710
0calmonth        KF1 KF2      KF2      KF2     KF2
01.2009           xxx               xxx       xxx     xxx
02.2009           xxx               xxx       xxx     xxx
03.2009           xxx               xxx       xxx     xxx
I checked the forum for a while and did not find the answer (zero suppress do not work on result)
Thanks for you help,
rgds,
Sebastien

Hi,
I didnt get exactly for what you are looking for ,
Chars : 0Plant, 0Calmonth....put these two in two new selections by creating a new structure in Rows
KF:        what ever the KFs you need put them in Columns in a structure,
then enable the Cell Reference, now you can hide the KF results by cell wise and/or column wise however you need,
Regards
ReddY A

Hiding lines in a query while using the overall results

Hi all,
We got a hierarchy with 4 levels. Each element of the first level after the root "L1" (2nd level in real) receive amounts called "INITIAL". The next step is to send and dispatch these amounts to the 3rd level "L2". At this point, the L2s can send to each other amounts which are then typed as "TRANSFER" and no more "INITIAL" or send and dispatch to the 4th level elements.
We isolated these movements to emphasize on the L2s which is part of the query goal. The lines as then restricted to the L2s. The next column must compare as a percentage the amounts typed "TRANSFER" to the amounts a the their L1s (father node).
Our need is to know how to receive an overall result ("INITIAL" amounts on L1s) at the level 2 strictly.
Type of hierarchy :
1. ROOT
 2. L1A : INITIAL (1000)
 3. L21-1A : INITIAL (700) -> TRANSFER type for 200
 4...
 3. L22-1A : INITIAL (300) -> TRANSFER type for 100
 4...
 2. L2A : INITIAL
 3. L21-2A : INITIAL & TRANSFER
 4...
 3. L22-2A : INITIAL & TRANSFER
 4...
The result of the query is :
L21-1A : 20% (is 200/1000)
L22-1A : 10%
Thanks in advance for your help.
Geo

HI,
I would suggest you to create a new KF with a formula to check if any of the KF value is zero for example..
New KF =(( col1 == 0) OR (col2 == 0) OR (col3 == 0) )
You then hide this new KF always in the query and create a condition to display rows where the New KF is not equal to 1.
This will hide all the rows which have any of the 3 KF's as 0.
Regards,
Shilpa

Check complete. The overall result of this check is: Failed ASM ins

Similar Messages

Maybe you are looking for