Check condition on sub total line of ALV list
Hi All ,
Is it possible to check condition on the value of subtotal line in ALV list ,
I,e If the value of subtotal line is say greator than 100 I need to change the color of that line or change the text on the subtotal line .
I know how to change the subtotal text but i want to change with respect to value of the subtotal ,
Any input if this can be achieved will be great .
Thanks in adv .
Vinay
Edited by: vinay kolla on Jul 29, 2009 4:43 AM
Hi,
I donu2019t think there is any direct way to check the subtotal value in LIST display, try the following logic.
1. Use the event BEFORE_LINE_OUTPUT to check the subtotal value and accordingly change the text or colour of the line.
2. To use events in ALV, first get the events into a table through the FM REUSE_ALV_EVENTS_GET as shown
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = z_i_events.
SORT z_i_events BY name.
CLEAR z_wa_events.
READ TABLE z_i_events WITH KEY name = slis_ev_before_line_output
INTO z_wa_events BINARY SEARCH.
IF sy-subrc = 0.
MOVE 'BEFORE_LINE_OUTPUTu2019 TO z_wa_events-form.
MODIFY z_i_events FROM z_wa_events INDEX sy-tabix.
ENDIF.
3. Create a form with the name BEFORE_LINE_OUTPUT and do the coding to check the subtotals there.
Form BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO.
*The structure RS_LINEINFO will have u2018Xu2019 in the field rs_lineinfo-subtot for subtotals.
If RS_LINEINFO-SUBTOT = u2018Xu2019.
*Here try to find the totals by looping at your final internal table till rs_lineinfo-tabindex.
*Then based on this u can give the colour to the line.
*I think there is no other way to check the subtotal value.
Endif.
Endform.
Edited by: venkatesh PH on Jul 29, 2009 5:31 AM
Similar Messages
-
How To avoid column heading for only total line in ALV list Display
Hi,
How To avoid column heading for only total line in ALV list Display.Hi,
to change colunm header field catlog is built
look at the example below
Changing column text headers
use this to change, hide, or alter the ALV columns
CLEAR: gt_fcat.
READ TABLE gt_fcat WITH KEY fieldname = 'TEXT1' " ***
*TEXT1 is your field name
ASSIGNING <gtfcat>.
IF sy-subrc = 0.
<gtfcat>-coltext = 'Date Type'.
<gtfcat>-no_out = ' '.
<gtfcat>-tooltip = 'Date Type Text from IT0019'.
<gtfcat>-seltext = 'IT0019'.
keep seltext to '' if u want to hide
ENDIF.
regards
austin -
Identify selection of sub-total line in ALV grid
Hi folks,
Is there a way to identify in the report if the user has selected any sub-total line in an ALV grid? Both for REUSE_ALV_GRID_DISPLAY and CL_GUI_ALV_GRID.
Thanks
SagarSagar,
1. I don't think its good design, if you want to process those three lines, you should ask the user to select those 3 rows and process them.
2. If you have no choice, tyr these methods, these might give you some info
GET_SORT_CRITERIA
GET_SUBTOTALS
These methods might give you the info you are looking for. Try it out.
regards,
Ravi -
How to print sub total text in ALV
Hi All,
I have a prblem in printing sub total text in ALV. I am passing the text for sub total in ALV layout to the field SUBTOTALS_TEXT. Even then the text is not displayed where as this is working for TOTAL with the field TOTALS_TEXT.
Could any one provide me the solution please?
Thanks & Regards,
S.LakshmiHi Lakshmi,
Please refer to the following code :
report zalv10.
type-pools: slis.
data: g_repid like sy-repid,
gs_print type slis_print_alv,
gt_list_top_of_page type slis_t_listheader,
gt_events type slis_t_event,
gt_sort type slis_t_sortinfo_alv,
gs_layout type slis_layout_alv,
gt_fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of gt_fieldcat,
col_pos type i.
data: begin of itab,
field1(5) type c,
field2(5) type c,
field3(5) type p decimals 2,
end of itab.
data: begin of itab1 occurs 0.
include structure itab.
data: end of itab1.
data: begin of itab_fieldcat occurs 0.
include structure itab.
data: end of itab_fieldcat.
Print Parameters
parameters:
p_print as checkbox default ' ', "PRINT IMMEDIATE
p_nosinf as checkbox default 'X', "NO SELECTION INFO
p_nocove as checkbox default ' ', "NO COVER PAGE
p_nonewp as checkbox default ' ', "NO NEW PAGE
p_nolinf as checkbox default 'X', "NO PRINT LIST INFO
p_reserv type i. "NO OF FOOTER LINE
initialization.
g_repid = sy-repid.
perform print_build using gs_print. "Print PARAMETERS
start-of-selection.
TEST DATA
move 'TEST1' to itab1-field1.
move 'TEST1' to itab1-field2.
move '10.00' to itab1-field3.
append itab1.
move 'TEST2' to itab1-field1.
move 'TEST2' to itab1-field2.
move '20.00' to itab1-field3.
append itab1.
do 50 times.
append itab1.
enddo.
end-of-selection.
perform build.
perform eventtab_build changing gt_events.
perform comment_build changing gt_list_top_of_page.
perform call_alv.
form build.
DATA FIELD CATALOG
Explain Field Description to ALV
data: fieldcat_in type slis_fieldcat_alv.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD1'.
fieldcat_ln-tabname = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
fieldcat_ln-key = ' '. "SUBTOTAL KEY
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'HEAD1'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD2'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-no_out = 'X'.
fieldcat_ln-seltext_l = 'HEAD2'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD3'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-ref_fieldname = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
fieldcat_ln-ref_tabname = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
fieldcat_ln-no_out = ' '.
fieldcat_ln-do_sum = 'X'. "SUM UPON DISPLAY
append fieldcat_ln to gt_fieldcat.
DATA SORTING AND SUBTOTAL
data: gs_sort type slis_sortinfo_alv.
clear gs_sort.
gs_sort-fieldname = 'FIELD1'.
gs_sort-spos = 1.
gs_sort-up = 'X'.
gs_sort-subtot = 'X'. ***CRUCIAL STATEMENT****
append gs_sort to gt_sort.
clear gs_sort.
gs_sort-fieldname = 'FIELD2'.
gs_sort-spos = 2.
gs_sort-up = 'X'.
*GS_SORT-SUBTOT = 'X'. **THIS SHOULD NOT BE UNCOMENTED*
append gs_sort to gt_sort.
endform.
form call_alv.
ABAP List Viewer
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_structure_name = 'ITAB1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = gt_events[]
IT_EVENT_EXIT =
is_print = gs_print
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab1
exceptions
program_error = 1
others = 2.
endform.
HEADER FORM
form eventtab_build changing lt_events type slis_t_event.
constants:
gc_formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = lt_events.
read table lt_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move gc_formname_top_of_page to ls_event-form.
append ls_event to lt_events.
endif.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
endform.
form comment_build changing gt_top_of_page type slis_t_listheader.
data: gs_line type slis_listheader.
clear gs_line.
gs_line-typ = 'H'.
gs_line-info = 'HEADER 1'.
append gs_line to gt_top_of_page.
clear gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'INFO 1'.
append gs_line to gt_top_of_page.
gs_line-key = 'STATUS 2'.
gs_line-info = 'INFO 2'.
append gs_line to gt_top_of_page.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
endform.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
write: sy-datum, 'Page No', sy-pagno left-justified.
endform.
form end_of_page.
write at (sy-linsz) sy-pagno centered.
endform.
PRINT SETTINGS
form print_build using ls_print type slis_print_alv.
ls_print-print = p_print. "PRINT IMMEDIATE
ls_print-no_print_selinfos = p_nosinf. "NO SELECTION INFO
ls_print-no_coverpage = p_nocove. "NO COVER PAGE
ls_print-no_new_page = p_nonewp.
ls_print-no_print_listinfos = p_nolinf. "NO PRINT LIST INFO
ls_print-reserve_lines = p_reserv.
endform.
<b>Please reward points if helpful.</b>
Regards,
Amit Mishra -
Add another column under sub total column in alv
hi guys,
is there any way i can add a new column under sub total column in alv function and have my own calculation for itHi Radha,
I doubt if that can be changed....because the event that i was referring to in my previous post works with ALV List display...But in any case you can try that.....
There is an event in SLIS....(As i told you, i dont remember the name and currently i dont have access to SAP system, so i am not able to verify and let you know that event name).....
Other thatn TOP and END of PAGE events, there is an event for sub-total text......i think it would start with "SUBTOTAL"...
you need to use that event in your events table and pass it to ALV Grid display.
Then create a sub-routine with that name (As you do for TOP-OF-PAGE event)....and in this event you can change the values in runtime (PROVIDED, this event gets triggered for ALV GRID).....
If this does not work, i think calculating sub-totals while you build the internal table would be a better option....(If you have time constraint....else you can do some more research on the same)........
Best Regards,
Ram. -
How to set the focus on the new added line in ALV list (OO)
Dear Friends,
I have an ALV list based on OO(using alv_grid->set_table_for_first_display), when I click the 'new' button to add a new line, the mouse arrow is always pointing to the first line - not the new created line for user to input!!.
So how to set the focus (mouse arrow) on the new added line in ALV list for user to input it friendly?
Thanks a lot!!Hello,
To get the selected line row first we have get all the rows in the internal table.
When u click on the button when it is creating the new line we have to pass the row number to the call method
CALL METHOD <ref.var. to CL_GUI_ALV_GRID > ->get_selected_rows
IMPORTING
ET_INDEX_ROWS = <internal table of type LVC_T_ROW > (obsolete)
ET_ROW_NO = <internal table of type LVC_T_ROID > .
CALL METHOD<ref.var. to CL_GUI_ALV_GRID>->set_selected_rows
EXPORTING
IT_ROW_NO = <internal table of type LVC_T_ROID>
or alternatively
IT_INDEX_ROWS = <internal table of type LVC_T_ROW>
IS_KEEP_OTHER_SELECTIONS = <type CHAR01>.
http://help.sap.com/saphelp_erp2004/helpdata/EN/22/a3f5ecd2fe11d2b467006094192fe3/content.htm -
Short dump when I do total or sub total in the ALV report
Hi,
When I do total or sub-total on the currency field in the ALV report, it'll give a short dump like
" The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)".
Short text of error message:
Technical information about the message:
Message classe...... "0K"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program SAPLSLVC
Include LSLVCF36
Row 2,726
Module type (FORM)
Module Name FILL_DATA_TABLE
sometime when I do the page down on the ALV report, the same short dump is coming.
Can anyone help me out.
Thanks
SelvaHi,
I'm getting this short dump in the standard program.
I'm getting ALV report display perfectly. the problem is, when I do total or subtotal on the currency fields.
2704
2705 ************************************
2706 * Column per Fieldcat Entry
2707 ************************************
2708 ls_lvc_data-value = space.
2709 clear ls_lvc_data-style.
2710 loop at it_fcat_local assigning <ls_fcat>
2711 where tech ne 'X' and no_out ne 'X'.
2712 if l_invisible eq 'X'.
2713 clear l_invisible.
2714 if <ls_fcat>-do_sum is initial.
2715 continue.
2716 else.
2717 clear ls_lvc_data-col_pos.
2718 endif.
2719 endif.
2720
2721 add 1 to ls_lvc_data-col_pos.
2722
2723 assign component <ls_fcat>-fieldname
2724 of structure <ls_data> to <l_field_value>.
2725 if sy-subrc ne 0.
>>>>> message x000(0k).
2727 endif.
2728
in this standard program, I'm getting the dump. the line is mentioned above in the code. -
Urgent: regarding sub total button in alv report
hi,
i had made dis report and it is is fine till now,but now i want add the sub total field in it ,by making double click on the field sub-total should be displayed in it.
here is d code as i had tried the sub - total but when i execute it is giving some diferrent result.
*& Report ZTET2
REPORT ZTET2.
TABLES: ISEG,MARA.
TYPE-POOLS : SLIS.
DATA : DATE1(15) TYPE C,
DATE2(15) TYPE C,
TITLE(65) TYPE C,
DT(25) TYPE C.
DATA : ITEVENT TYPE SLIS_T_EVENT.
DATA: lv_sort TYPE slis_sortinfo_alv,
t_sort type slis_t_sortinfo_alv.
DATA : repid LIKE sy-repid.
INTERNAL TABLE FOR INVENTORY STOCK *****************
DATA: BEGIN OF ITS1 OCCURS 0,
MATNR LIKE ISEG-MATNR,
ITEMID(6) TYPE C,
MEINS LIKE ISEG-MEINS,
MENGE LIKE ISEG-MENGE,
WRTZL LIKE ISEG-WRTZL,
BUCHM LIKE ISEG-BUCHM,
WRTBM LIKE ISEG-WRTBM,
WERKS LIKE ISEG-WERKS,
BUDAT LIKE ISEG-BUDAT,
ZLDAT LIKE ISEG-ZLDAT,
MTART LIKE MARA-MTART,
ITEMDESC LIKE MAKT-MAKTX,
DIFFQTY LIKE ISEG-BUCHM,
DIFFVALUE LIKE ISEG-WRTBM,
GRUND LIKE ISEG-GRUND,
GRTXT LIKE T157E-GRTXT,
BWART LIKE T157E-BWART,
REAS TYPE C LENGTH 15,
END OF ITS1.
data: t_heading type slis_t_listheader.
SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.
*SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*********PARAMETERS*********
PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT OBLIGATORY NO-EXTENSION,
M_TYPE FOR MARA-MTART,
IT_M FOR MARA-MATNR.
*********DEFINING VARIABLES*********
SELECTION-SCREEN END OF BLOCK par1.
CONCATENATE R_DATE-LOW6(2) '.' R_DATE-LOW4(2) '.' R_DATE-LOW+0(4) INTO DATE1.
CONCATENATE R_DATE-HIGH6(2) '.' R_DATE-HIGH4(2) '.' R_DATE-HIGH+0(4) INTO DATE2.
TOP-OF-PAGE.
PERFORM PG_HEADER.
START-OF-SELECTION.
SELECT AMATNR AMEINS AMENGE AWRTZL ABUCHM AWRTBM AWERKS ABUDAT AZLDAT BMTART AGRUND CBWART
FROM ISEG AS A INNER JOIN MARA AS B ON BMATNR = AMATNR
INNER JOIN MSEG AS C ON AMBLNR = CMBLNR
INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE BMATNR = AMATNR AND BMEINS = AMEINS AND AWERKS = PLANT AND ABUDAT IN R_DATE AND BMTART IN M_TYPE AND BMATNR IN IT_M.
LOOP AT ITS1.
ITS1-ITEMID = ITS1-MATNR+12(6).
ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.
ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.
SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.
SELECT SINGLE GRTXT INTO ITS1-GRTXT FROM T157E WHERE GRUND = ITS1-GRUND AND SPRAS = 'E' AND BWART = ITS1-BWART.
MODIFY ITS1.
ENDLOOP.
PERFORM PRN_SMSTOCK_ALV.
WRITING DATA FROM D TABLES**********
FORM PG_HEADER.
WRITE : 'PHYSICAL INVENTORY AUDIT REPORT PLANT : ', PLANT.
ENDFORM.
*& Form PRN_SMSTOCK_ALV
text
--> p1 text
<-- p2 text
form PRN_SMSTOCK_ALV .
data: w_title type lvc_title,
w_repid type syrepid,
w_comm type slis_formname,
w_status type slis_formname,
x_layout type slis_layout_alv,
t_event type slis_t_event,
t_fieldcat type slis_t_fieldcat_alv,
t_subtot TYPE slis_t_sortinfo_alv,
subtot LIKE LINE OF t_subtot.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
perform set_fieldcat2 using:
1 'MTART' 'MTART' 'MARA' '15' space 'MATERIAL TYPE' space space space space space space space space SPACE t_fieldcat 'L' 'L',
2 'ITEMID' 'ITEMID' 'MARA' '7' space 'ITEM ID' space space space space space space space space SPACE t_fieldcat 'R' 'C',
3 'ITEMDESC' 'MAKTX' 'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',
4 'MEINS' 'MEINS' 'MARA' '5' space 'UOM' space space space space space space space space SPACE t_fieldcat 'C' 'C',
5 'MENGE' 'MENGE' 'ISEG' '13' space 'ORG.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
6 'WRTZL' 'WRTZL' 'ISEG' '13' space 'ORG.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',
7 'BUCHM' 'BUCHM' 'ISEG' '13' space 'PHY.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
8 'WRTBM' 'WRTBM' 'ISEG' '13' space 'PHY.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',
9 'DIFFQTY' 'MENGE' 'ISEG' '13' space 'DIFF.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
10 'DIFFVALUE' 'WRTZL' 'ISEG' '13' space 'DIFF.INV.VALUE' space space space space space space space space SPACE t_fieldcat SPACE 'P',
11 'BUDAT' 'BUDAT' 'ISEG' '18' space 'CORRECTED DATE' space space space space space space space space SPACE t_fieldcat 'C' 'C',
12 'GRTXT' 'GRTXT' 'ISEG' '18' space 'REASON' space space space space space space space space SPACE t_fieldcat 'L' 'L',
13 'REAS' 'REAS' 'ISEG' '18' space 'AUTH.BY' space space space space space space space space SPACE t_fieldcat 'C' 'C'.
x_layout-zebra = 'X'.
perform set_top_page_heading using t_heading t_event.
perform set_events using t_event.
perform get_subtotals.
w_status = ''.
w_repid = sy-repid.
w_comm = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = w_repid
it_fieldcat = t_fieldcat
i_Callback_top_of_page = 'Top-of-page'
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
tables
t_outtab = ITS1
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM.
FORM set_fieldcat2 USING
p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
p_subtot
t_fieldcat TYPE slis_t_fieldcat_alv
P_JUST
P_FTYPE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
wa_fieldcat-t_subtot = p_subtot.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
IF NOT P_JUST IS INITIAL.
WA_FIELDCAT-JUST = P_JUST.
ENDIF.
IF NOT p_edit IS INITIAL.
wa_fieldcat-Input = 'X'.
wa_fieldcat-edit = 'X'.
wa_fieldcat-do_sum = 'x'.
wa_fieldcat-p_subtot = 'x'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
======================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_heading.
ENDFORM.
form set_top_page_heading using t_heading type slis_t_listheader
t_events type slis_t_event.
data: x_heading type slis_listheader,
x_event type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'PHYSICAL INVENTORY AUDIT REPORT'.
append x_heading to t_heading.
Plant Name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'PLANT : '.
x_heading-info = PLANT.
append x_heading to t_heading.
IF DATE2 = '00.00.0000'.
CONCATENATE DATE1 'to' DATE1 INTO DT SEPARATED BY SPACE.
ELSE.
CONCATENATE DATE1 'to' DATE2 INTO DT SEPARATED BY SPACE.
ENDIF.
X_heading-TYP = 'S'.
X_heading-key = 'PERIOD :'.
X_heading-INFO = DT.
APPEND x_heading TO t_heading.
Control Date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL NO. :'.
x_heading-info = ' ASDFADDFAAS DATE : 11.04.2007'.
append x_heading to t_heading.
Control date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL DATE : '.
x_heading-info = ''.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'DATE : '.
write sy-DATUM to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
FORM get_subtotals.
CLEAR lv_sort.
lv_sort-fieldname = 'MENGE'.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
*lv_sort-fieldname = 'MENGE'.
*lv_sort-tabname = 'ITS1'.
*lv_sort-subtot = 'X'.
*APPEND lv_sort TO t_sort.
lv_sort-fieldname = 'WRTZL'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'BUCHM'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'WRTBM'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'DIFFQTY'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'DIFFVALUE'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
ENDFORM.
form set_events using t_events type slis_t_event.
data: x_event type line of slis_t_event.
endform.
PLZ HELP ME and definately get rewarded.hi,
how did u declared ur internal table?
Declare a dummy field in your internal table to trigger subtotal text event.
TYPES: BEGIN OF ty_ekpo,
lifnr TYPE ekko-lifnr, "vendor number
ebeln TYPE ekko-ebeln, "purchase document number
ebelp TYPE ekpo-ebelp, "Item Number of Purchasing Document
matnr TYPE ekpo-matnr, "Material Number
bukrs TYPE ekpo-bukrs, "Company Code
werks TYPE ekpo-werks, "Plant
d, "Dummy field to fire the Subtotal text event
END OF ty_ekpo.
Prepare field catalog for that dummyfield also and set attributes like below
wa_fcat-col_pos = 7.
wa_fcat-fieldname = 'D'.
wa_fcat-tabname = 'IT_EKPO'.
wa_fcat-ref_fieldname = 'NETPR'.
wa_fcat-ref_tabname = 'EKPO'.
wa_fcat-no_out = 'X'.
APPEND wa_fcat TO it_fcat.
Fill sortinfo table as follows
wa_sort-spos = 1.
wa_sort-fieldname = 'LIFNR'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = 'X'.
wa_sort-group = 'UL'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
wa_sort-spos = 2.
wa_sort-fieldname = 'D'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = 'X'.
wa_sort-group = 'UL'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO it_sort.
fill the event table
wa_event-name = 'SUBTOTAL_TEXT'. "--> this event is used to trigger subtotal text
wa_event-form = 'SUBTOTAL'.
APPEND wa_event TO it_event.
*& Form subtotal
FORM subtotal USING i_listhead STRUCTURE wa_ekpo i_subtotal TYPE slis_subtot_text.
READ TABLE it_sort INTO wa_sort WITH KEY fieldname = 'D'.
IF sy-subrc = 0.
IF i_subtotal-criteria = 'D'.
i_subtotal-display_text_for_subtotal = 'Sub total'.
ENDIF.
ENDIF.
ENDFORM. "subtotal
Thanks & REgards -
Hi,
Can I use a total line in an ALV grid and hide part of the columns, so that only the total line will be presented for some of the columns ?Hi,
Yes u can use a total column in the ALV Grid.
Check the code below:
AT LAST.
WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
WA_ALV_CAT1-JUST = C_CENTER. " 'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
ENDAT.
Regards
Kannaiah -
Hi,
I want to display the total of lines on the subtotal line of my grid.
As I don't have this field on my catalog, I think I would have to edit the total line to set the total of regs above...
Could someone help me?
Tks.
Regards,
Flavio.You can do that using the event SUBTOTAL_TEXT .
REPORT ZTEST_ALV_TEXT .
type-pools : slis.
types : begin of itab_t,
ebeln like ekpo-ebeln,
lifnr like ekko-lifnr,
ekorg like ekko-ekorg,
ekgrp like ekko-ekgrp,
werks like ekpo-werks,
ebelp like ekpo-ebelp,
matnr like ekpo-matnr,
menge like ekpo-menge,
netpr like ekpo-netpr,
d, "Dummy field to fire the Subtotal text event
end of itab_t.
data: itab type table of itab_t.
data: tab type itab_t.
data : itab1 like eket occurs 0 with header line.
data: t_fcat type slis_t_fieldcat_alv,
it_sort type slis_t_sortinfo_alv,
t_events type slis_t_event,
listhead type slis_t_listheader,
ls_layout type slis_layout_alv.
start-of-selection.
select a~ebeln
a~lifnr
a~ekorg
a~ekgrp
b~werks
b~ebelp
b~matnr
b~menge
b~netpr
up to 100 rows
into corresponding fields of table itab
from ekko as a inner join ekpo as b
on a~ebeln = b~ebeln.
end-of-selection.
perform fill_fcat using t_fcat.
perform fill_event using t_events.
perform fill_layout.
perform display.
*& Form fill_fcat
text
-->P_T_FCAT text
form fill_fcat using p_t_fcat type slis_t_fieldcat_alv.
data : lfcat type slis_fieldcat_alv,
colpos type i value '0'.
data : ls_sort type slis_sortinfo_alv.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'EBELN'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'EBELN'.
lfcat-ref_tabname = 'EKKO'.
lfcat-hotspot = 'X'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'LIFNR'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'LIFNR'.
lfcat-ref_tabname = 'EKKO'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'EKORG'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'EKORG'.
lfcat-ref_tabname = 'EKKO'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'EKGRP'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'EKGRP'.
lfcat-ref_tabname = 'EKKO'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'WERKS'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'WERKS'.
lfcat-ref_tabname = 'EKPO'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'EBELP'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'EBELP'.
lfcat-ref_tabname = 'EKPO'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'MATNR'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'MATNR'.
lfcat-ref_tabname = 'EKPO'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'MENGE'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'MENGE'.
lfcat-ref_tabname = 'EKPO'.
lfcat-do_sum = 'X'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'NETPR'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'NETPR'.
lfcat-ref_tabname = 'EKPO'.
lfcat-do_sum = 'X'.
append lfcat to p_t_fcat.
clear lfcat.
colpos = colpos + 1.
lfcat-col_pos = colpos.
lfcat-fieldname = 'D'.
lfcat-tabname = 'ITAB'.
lfcat-ref_fieldname = 'EBELN'.
lfcat-ref_tabname = 'EKKO'.
lfcat-no_out = 'X'.
append lfcat to p_t_fcat.
clear lfcat.
ls_sort-spos = 1.
ls_sort-fieldname = 'EBELN'.
ls_sort-tabname = 'ITAB'.
ls_sort-up = 'X'.
ls_sort-group = 'UL'.
append ls_sort to it_sort.
clear ls_sort.
ls_sort-spos = 2.
ls_sort-fieldname = 'D'.
ls_sort-tabname = 'ITAB'.
ls_sort-up = 'X'.
ls_sort-group = 'UL'.
ls_sort-subtot = 'X'.
append ls_sort to it_sort.
endform. " fill_fcat
*& Form fill_event
text
-->P_T_EVENTS text
form fill_event using p_t_events type slis_t_event.
data : ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_t_events
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table p_t_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to ls_event-form.
append ls_event to p_t_events.
endif.
read table p_t_events with key name = SLIS_EV_SUBTOTAL_TEXT
into ls_event.
if sy-subrc = 0.
move 'SUBTOTAL' to ls_event-form.
append ls_event to p_t_events.
endif.
endform. " FILL_EVENT
FORM SUBTOTAL USING I_LISTHEAD STRUCTURE tab
I_SUBTOTAL TYPE SLIS_SUBTOT_TEXT.
*criteria type slis_fieldname,
keyword like dd03p-reptext,
criteria_text(255) type c,
max_len like dd03p-outputlen,
display_text_for_subtotal(255) type c,
if I_SUBTOTAL-criteria = 'D'.
I_SUBTOTAL-display_text_for_subtotal = 'Sub total'.
endif.
ENDFORM.
*& Form TOP_OF_PAGE
text
form top_of_page.
data : s_listhead type slis_listheader.
clear s_listhead.
s_listhead-typ = 'H'.
s_listhead-info = 'SIMPLE REPORT'.
append s_listhead to listhead.
s_listhead-typ = 'S'.
s_listhead-key = 'EBELN'.
s_listhead-info = 'ALV'.
append s_listhead to listhead.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = listhead
i_logo = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
endform. "TOP_OF_PAGE
*& Form fill_layout
text
-->P_S_LAYOUT text
form fill_layout .
ls_layout-zebra = 'X'.
ls_layout-detail_popup = 'X'.
ls_layout-key_hotspot = 'X'.
ls_layout-window_titlebar = 'Dharma'.
ls_layout-detail_titlebar = 'Jasti'.
ls_layout-totals_text = 'GRAND TOTAL'.
ls_layout-subtotals_text = 'SUB'.
endform. " fill_layout
*& Form display
text
--> p1 text
<-- p2 text
form display .
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
i_callback_pf_status_set = 'STATUS'
i_callback_user_command = 'USER_COMMAND'
I_STRUCTURE_NAME =
is_layout = ls_layout
it_fieldcat = t_fcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = it_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc 0.
MESSAGE ID SY-MSGI D TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " display
*& Form status
text
-->EXTAB text
form status using extab type slis_t_extab.
set pf-status 'PFSA' excluding extab.
endform. "STATUS
*& Form user_command
text
-->R_UCOMM text
-->RS_SELFIELDtext
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case r_ucomm.
when '&ETA'.
select * from eket into corresponding fields of itab1
where ebeln = rs_selfield-value.
write:/ itab1-ebeln,
itab1-ebelp,
itab1-etenr,
itab1-eindt,
itab1-menge.
endselect.
when 'BACK' or 'EXIT' or 'CANC'.
leave .
endcase.
endform. "USER_COMMAND -
Sub totaling in the ALV report
Hi,
My requirement is to display the data in a ALV format. The ALV need to display the sub total. For example if the ALV display the comapny code, the number of the line of the company code need to displayed.
1000
1000
1000
Sub total 3
2000
2000
2000
2000
sub total 4
I made the changes to display the ALV. Please help mein obtaining the sub total..
Regards
SureshHI,
Below example may clear ur requirement.
REPORT YMS_ALVSUBTOTAL.
*REPORT z_alv_sub_totals .
TYPE-POOLS: slis.
DATA: BEGIN OF it_output OCCURS 0,
var1(8) TYPE n,
var2(10),
var3 TYPE I,
END OF it_output.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
t_fieldcat TYPE slis_fieldcat_alv,
it_sort TYPE slis_t_sortinfo_alv,
t_sort TYPE slis_sortinfo_alv,
v_repid LIKE sy-repid.
INITIALIZATION.
v_repid = sy-repid.
START-OF-SELECTION.
PERFORM get_data.
PERFORM sort_fields.
PERFORM fill_fieldcat.
PERFORM list_display.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM get_data.
it_output-var1 = 1000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'siddhu'.
it_output-var3 = '20000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'chinni'.
it_output-var3 = '100000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 2000.
it_output-var2 = 'chicchu'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 2000.
it_output-var2 = 'candy'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 1000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
it_output-var1 = 4000.
it_output-var2 = 'anupama'.
it_output-var3 = '10000'.
APPEND it_output.
CLEAR it_output.
ENDFORM. " GET_DATA
*& Form fill_fieldcat
text
--> p1 text
<-- p2 text
FORM fill_fieldcat.
PERFORM fill_fields USING: 'IT_OUTPUT' 'VAR1' 'Variable 1' ' ',
'IT_OUTPUT' 'VAR2' 'Variable 2' ' ',
'IT_OUTPUT' 'VAR3' 'Variable 3' 'X'.
ENDFORM. " fill_fieldcat
*& Form fill_fields
text
-->P_0146 text
-->P_0147 text
-->P_0148 text
-->P_0149 text
FORM fill_fields USING value(tabname) TYPE slis_tabname
value(fieldname) TYPE slis_fieldname
value(seltext_m) LIKE dd03p-scrtext_m
value(do_sum) TYPE c.
t_fieldcat-tabname = tabname.
t_fieldcat-fieldname = fieldname.
t_fieldcat-seltext_m = seltext_m.
IF do_sum = 'X'.
t_fieldcat-datatype = 'CURR'.
ENDIF.
t_fieldcat-do_sum = do_sum.
APPEND t_fieldcat TO it_fieldcat.
CLEAR t_fieldcat.
ENDFORM. " fill_fields
*& Form list_display
text
--> p1 text
<-- p2 text
FORM list_display.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
it_fieldcat = it_fieldcat
it_sort = it_sort[]
TABLES
t_outtab = it_output
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " list_display
*& Form sort_fields
text
--> p1 text
<-- p2 text
FORM sort_fields.
t_sort-fieldname = 'VAR1'.
t_sort-tabname = 'IT_OUTPUT'.
t_sort-spos = 1.
t_sort-up = 'X'.
t_sort-subtot = 'X'.
APPEND t_sort TO it_sort.
CLEAR t_sort.
t_sort-fieldname = 'VAR3'.
t_sort-tabname = 'IT_OUTPUT'.
t_sort-spos = 2.
t_sort-up = 'X'.
APPEND t_sort TO it_sort.
CLEAR t_sort.
ENDFORM. " sort_fields
Thanks,
Shankar -
Regarding totals and sub totals text in alv
Hi all,
i am displaying Totals and subtotals ......but i want to display the text before the the Totals and Subtotals.
Please help me in regarding this..
Thanks in advance,
S.Gangi reddy.hi,
check this report.
*& Report ZGM_ALV_SUBTOTAL_TEXT *
*& Author :
*& Date :
*& Description :
*& Modification History
REPORT ZGM_ALV_SUBTOTAL_TEXT .
*& Table declaration
TABLES: ekko.
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.
*& Type declaration
Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
ebeln TYPE char30, " Document no.
ebelp TYPE ebelp, " Item no
matnr TYPE matnr, " Material no
matnr1 TYPE matnr, " Material no
werks TYPE werks_d, " Plant
werks1 TYPE werks_d, " Plant
ntgew TYPE entge, " Net weight
gewe TYPE egewe, " Unit of weight
END OF x_data.
*& Internal table declaration
DATA:
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
Internal table for ALV Display events
i_events TYPE slis_t_event,
Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.
*& Work area declaration
DATA:
wa_ekko TYPE x_data,
wa_layout TYPE slis_layout_alv,
wa_events TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
*& Constant declaration
CONSTANTS:
c_header TYPE char1
VALUE 'H', "Header in ALV
c_item TYPE char1
VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
Select data from ekpo
SELECT ebeln " Doc no
ebelp " Item
matnr " Material
matnr " Material
werks " Plant
werks " Plant
ntgew " Quantity
gewei " Unit
FROM ekpo
INTO TABLE i_ekpo
WHERE ebeln IN s_ebeln
AND ntgew NE '0.00'. IF sy-subrc = 0.
SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.
To build the Page header
PERFORM sub_build_header. "* To prepare field catalog
PERFORM sub_field_catalog. "* Perform to populate the layout structure
PERFORM sub_populate_layout."* Perform to populate the sort table.
PERFORM sub_populate_sort."* Perform to populate ALV event
PERFORM sub_get_event.
END-OF-SELECTION.
* Perform to display ALV report
PERFORM sub_alv_report_display.
*& Form sub_build_header
To build the header
No Parameter
FORM sub_build_header .
Local data declaration
DATA: l_system TYPE char10 , "System id
l_r_line TYPE slis_listheader, "Hold list header
l_date TYPE char10, "Date
l_time TYPE char10, "Time
l_success_records TYPE i, "No of success records
l_title(300) TYPE c. " Title
Title Display
l_r_line-typ = c_header. " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.
* Run date Display
CLEAR l_date.
l_r_line-typ = c_item. " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
l_date.ENDFORM. " sub_build_header
*& Form sub_field_catalog
Build Field Catalog
No Parameter
FORM sub_field_catalog .
Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING: '01' '01' 'EBELN'
'I_EKPO' 'L'
'Doc No'(003) ' ' ' ' ' ' ' ', '01' '02' 'EBELP' 'I_EKPO' 'L'
'Item No'(004) 'X' 'X' ' ' ' ', '01' '03' 'MATNR' 'I_EKPO' 'L'
'Material No'(005) 'X' 'X' ' ' ' ', '01' '03' 'MATNR1' 'I_EKPO'
'L'
'Material No'(005) ' ' ' ' ' ' ' ',
'01' '04' 'WERKS' 'I_EKPO' 'L'
'Plant'(006) 'X' 'X' ' ' ' ', '01' '04' 'WERKS1' 'I_EKPO' 'L'
'Plant'(006) ' ' ' ' ' ' ' ', '01' '05' 'NTGEW' 'I_EKPO' 'R'
'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.
" sub_field_catalog*&----
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos TYPE sycurow
p_colpos TYPE sycucol
p_fldnam TYPE fieldname
p_tabnam TYPE tabname
p_justif TYPE char1
p_seltext TYPE dd03p-scrtext_l
p_out TYPE char1
p_tech TYPE char1
p_qfield TYPE slis_fieldname
p_qtab TYPE slis_tabname.
Local declaration for field
catalog
DATA: wa_lfl_fcat TYPE slis_fieldcat_alv.
wa_lfl_fcat-row_pos = p_rowpos. "Row
wa_lfl_fcat-col_pos = p_colpos. "Column
wa_lfl_fcat-fieldname = p_fldnam. "Field Name
wa_lfl_fcat-tabname = p_tabnam. "Internal Table Name
wa_lfl_fcat-just = p_justif. "Screen Justified
wa_lfl_fcat-seltext_l = p_seltext. "Field Text
wa_lfl_fcat-no_out = p_out. "No output
wa_lfl_fcat-tech = p_tech. "Technical field
wa_lfl_fcat-qfieldname = p_qfield. "Quantity unit
wa_lfl_fcat-qtabname = p_qtab .
"Quantity table
IF p_fldnam = 'NTGEW'.
wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.
" sub_fill_alv_field_catalog*&----
*& Form sub_populate_layout
Populate ALV layout
No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'.
" Optimization of Col width
ENDFORM. " sub_populate_layout*&----
*& Form sub_populate_sort
Populate ALV sort table
No Parameter
FORM sub_populate_sort .
Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.
" sub_populate_sort*&----
*& Form sub_get_event
Get ALV grid event and pass the form name to subtotal_text
event
No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 4
IMPORTING
et_events = i_event
EXCEPTIONS
list_type_wrong = 0
OTHERS = 0.
Subtotal
READ TABLE i_event INTO l_s_event
WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
MOVE c_formname_subtotal_text TO l_s_event-form.
MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM.
" sub_get_event*&----
*& Form sub_alv_report_display
For ALV Report Display
No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .
This function module for displaying the ALV
report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_top_of_page = 'SUB_ALV_TOP_OF_PAGE'
is_layout = wa_layout
it_fieldcat = i_fieldcat
it_sort = i_sort
it_events = i_event
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = i_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.
ENDFORM.
" sub_alv_report_display*&----
FORM sub_alv_top_of_page
Call ALV top of page
No parameter
FORM sub_alv_top_of_page. "#EC CALLED*
*To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_alv_top_of_page.
ENDFORM.
"alv_top_of_page*&----
*& Form subtotal_text
Build subtotal text
P_total Total
p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
p_total TYPE any
p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
p_subtot_text-display_text_for_subtotal
= 'Material level total'(009).
ENDIF.
Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_textSelection screen:
\[removed by moderator\]
Edited by: Jan Stallkamp on Sep 3, 2008 6:17 PM -
Total and non-total lines in ALV grid
Hi all,
Does anyone know if there is any standard SAP functionality for retrieving the non-total/raw item lines that lies beneath a total line in an ALV grid (after the user has selected the total line)?
All helpful answers will be rewarded!
Best regards,
MVTry the ALV event AFTER-LINE-OUTPUT may be it can help u to achieve ur requirement.
Append AFTER-LINE-OUTPUT event to the internal table T_EVENT.
CLEAR W_EVENT.
W_EVENT-FORM = SLIS_EV_AFTER_LINE_OUTPUT.
W_EVENT-NAME = SLIS_EV_AFTER_LINE_OUTPUT.u201CAFTER_LINE_OUTPUT event
APPEND W_EVENT TO T_EVENT.
FORM AFTER_LINE_OUTPUT
USING P_RS_LINEINFO TYPE SLIS_LINEINFO.
Here you have to write the logic to retrieve the 'total' line
ENDFROM.
Now call the alv FM
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = L_REPID "Program Name
IS_LAYOUT = W_LAYOUT "Layout of the Report
IT_FIELDCAT = T_FIELDCAT "Field Catalog for Report
IT_EVENTS = T_EVENT "For setting the events
TABLES
T_OUTTAB = T_OUTPUT "Report data Internal Table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2. -
ALV Sub total texts. displayed in list not in grid.
Hi,
I am displaying data using alv and sub-totals on a particular column.
i am getting the sub-totals but i am not getting the sub-total texts when i am displaying data in a grid.
'REUSE_ALV_GRID_DISPLAY'.
i am getting subtotals and subtotal texts when i am diSplAying in list.
'REUSE_ALV_LIST_DISPLAY'.
but i want to get subtotal texts using alv grid, is it possible, if so please send me the code.
Any help in this regard is highly appreciated.
Thanks in advance for your help.Hi,
Actually i have wriitten the same code, in the alv. I am using Function modules. for the same code the sub-total and total text is appearing in the list output. but not in the grid output.
code.
wa_layout-zebra = 'X'.
wa_layout-subtotals_text = 'Total'.
wa_layout-totals_text = 'Sum of Marks'.
alv statement.
is_layout = wa_layout
Declaration.
DATA : wa_layout type slis_layout_alv.
for the same declarations (Above) list is showing the texts but not the grid.
Any help in this regard is highly appreciated. -
How to display sub total text in ALV grid display reporting
Hi,
I want to display a text 'SUB TOTAL' in Sub total row of an ALV report.
Presently I am getting the name of the field used in sorting to get sub totals. But I required to display own text. Could you please give me solution.
Thanks
Giridhar KarnamFor doing this u need to simply modify the layout properties, please award points if found helpful
DATA: L_LAYOUT TYPE SLIS_LAYOUT_ALV.
L_LAYOUT-SUBTOTALS_TEXT = 'GEN SUBTOT'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
Maybe you are looking for
-
AME import window empty after AE project converted to CC 2014
Running Mac OSX 10.9.4, I have After Effects CC, and CC 2014. I have Adobe Media Encoder CC, and CC 2014. I have been working in AE CC on a composition and encoding it in AME CC 2014 without this issue. This morning, I converted the project (.aep) to
-
I run norton 360 for my protection program & use your mozilla browser. Recently, I keep getting pop ups after I open the browser & I exit out of them, then I routinely clear history & tracking cookies, etc... I ran updated full scan, but keep getting
-
Optimizer chooses slow parallel plan in Oracle 9.2
We have an application that we are migrating from Oracle8 (8.1.7) to Oracle9 (9.2.0). We've changed from DMTs to LMTs too. We've come across a performance issue when running a application benchmark that we've isolated down to a simple 1 row look up q
-
Query on SRM Authorization for PO Print Preview from Web Browser
Hi All, I would like to restrict PO Preview option in Web browser for users who has SAP_EC_BBP_EMPLOYEE Role only. Kindly let me know that how I can restrict the PO Preview option with popup message like 'Authorization is not given to see the PO Prin
-
I have a MacBook pro and I need help getting it restarted. It flashes a folder with a question mark in it what is wrong with it, any suggestions