Check cube data

I have web query that i want to run. It's asking for certain variables eg : date.
How can i check cube data to see what valid dates have been posted in the cube?
so then I can put this in for the variable date ?
thanks

Hello MaGic,
How r u ?
Manage the Cube and check 0CALDAY (date) and then give the parameters.
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

  • How do we check intermediate data in Remote Cube

    Hi Experts,
    I want to check how the data is coming upto Remote Cube from Planning area.
    Currently the flow is MPRO -> Remote Cube ->PSA (directly updates to to target , so data stored in PSA)-> Planning Layout.
    Whenever I update data in the planning layout ->save-> and runs IP the data gets updated ( can check it in MPRO)  .
    How can i check the dat in between , also I tried to find out any docs. on the detailed mechaninsm of Remote cube but could find much .
    Can anyone plz help with the detailed mechanism of Remote Cube links ?
    Regards,
    Rajat

    Hi Rajat,
    A RemoteCube is an InfoCube whose transaction data is not managed in the BW but externally. Only the structure of the RemoteCube is defined in BW. The data is read for reporting using a BAPI from another system.
    Please see the discussion below for more information:
    Data load in Remote Cube
    More information on:
    SAP RemoteCube - Modeling - SAP Library
    Regards,
    Ashvin

  • IP- Planning CUBE data deletion.

    Dear Experts,
    We have a planning enabled cube and the data is loaded and distributed as per reference (planning Function) is used and the planning sequence is run on the cube.
    Unfortuntely due to some issue in CRM we have to delete data from the cube for the last two months and reload.
    My doubt is that if i just delete the data requests and also planning requests and then reload and run my planning sequence which will reporcess the data from last two months again or else will their be an issue.
    Because in the normal cube its quite simple just delete all the requests from the cube and DTP will take care about the rest.
    So please suggest is their anything i need to take care.
    Thanks and Regards
    Neel

    Hi,
    If you know what data you want to delete (Selection criteria is clear to you ),as you specified last two months data then i will suggest go with selective deletion.
    You can follow the following steps for correct deletion:-
    1) Check the data in the cube by using listcube,with same selction criteria (In u r case last two months) .This will confirm you know and checked what you want to delete.
    2) Select the cube--> Right click --->Change Real time load Behavior.
    3)Select Planning not allowed.
    4)Select the cube,right click manage option.
    5) Select contents tab ,click on delete selection button.
    6)Specify same selction which you checked in cube and delete the contents.
    7)Change the load behavior back to load not allowed.

  • Movement types data not capturing from BW cube data load

    Dear Experts,
    We are supporting BPC 10.0 Netweaver consolidation activities.
    As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
    0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
    ZFIGl_CA10  : From this cube the YTD closing balances of the balance sheet items are captured.
    Opening balances are copied from the last period of the previous year through balance carry forward.
    For a balance sheet itens, we are getting the F99 closing balances correctly captures.
    But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
    I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
    The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
    No modifications are done for both the file.
    Please find the below attached screen shot and kindly help me on the same.
    Regards,
    Shilpa

    Hi Shilpa,
    I had the same problem in mi last consolidation implementation and the solution in this case was
    implement all the data flow for the 0FI_GL_014,
    Regards,
    Mario

  • How can I  extract non-cumulative cube data to another cubes ?

    Dear Expert,
             I copied inventory cube 0ic_c03 to  a new cube : ZIC_C03  , then I loaded the data of 0ic_c03 to the new cube ZIC_C03 . 
    the loading was sucessful, but  the result of  report of the ZIC_C03 was not correct. After looking into the problem, I found out
    the new cube can successfully extract data related with "Goods movement" & "Revaluation", yet the extract of "Open Balance" does not seems to work.
             I have read through Note:375098, in which I could not find (InfoObject 0RECORDTP) in my start routine as mentioned in the solution
    ,and the note was not mentioned valid for BW 3.5 release.
             How can I  extract non-cumulative cube data to another cubes correctly in BW3.5 release SP20? 
       Thanks !

    Hi,
    Check Routines in Update rules wether same code is wrriten in  new cube
    cheers,
    Satya

  • Error occured while writing cube data

    Hi all,
    I was working around with the manage ownership section. When i tried to change [PCON] or [POWN] values and save it, I get an error message saying "Error occurred while writing cube data". After doing some googling I found out that this was because [PCON] and [POWN] are system accounts and hence we cannot submit data to it.
    Is there any way how I can resolve this issue? I have 2-3 entities which have minority and do not have 100% ownership/consolidation. Please help me out in this matter.
    Regards,
    Ramith

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • Error occurred while writing cube data - PCon

    Hi,
    Could you help me? I have created new application, but when I try to enter and save PCon values, I get a message: "Error occurred while writing cube data.". What could be the reason? I was able to update other data forms.
    Thank you in advance

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • How to make cube data avilable for reporting

    Hello,
    I have loaded data in to info cube from flat file, and created a query using BEx Analyzer. that query does not return results and gives an error msg "No Applicable Data Found".
    Padmanabha Rao had a same problem. In his thread, expert is recommending to check whether the data is available for Reporting by Rt clicking Infocube -> Manage -> Requests tab. Ideally, you'll be able see an indicator(Query icon) if it's available for reporting.
    My cube data is not available for reporting, how can I make it available for reporting?
    Regards,
    Tejas.

    Normally when the data gets loaded to cube, it will be available for reporting unlike DSO where you need to activate the data to make it available for reporting. There could be many reasons why the data is not available for reporting;
    1. May be there is aggregrates created on the cube and the data never been rolled up to the aggregates. If you see a summation sign next to the cube then there is aggregates created on the cube and you need to fill the aggregates first before you can have the data available for reporting in the cube. To do that, manage ->rollup and start, that will fill the aggregates.
    2. If there is any request in the cube which is still red, then any request after that won't be available for reporting until you either delete the red request.
    If the problem still persist, then I would just delete all the data from the cube and reload the data again.
    thanks.
    Wond

  • Record count is double in the Fact tables when compared to Cube data!

    Hello BW Gurus,
    I have 2 question to be answered!
    1. I have a cube which consist of 3 years of data. Due to some bad data in it, I have dropped the cube data completely from fact and dim tables and did an init. from ODS. the load failed due to "No SID found for value '2000000000000000000000010' of characteristic 0MAT_PLANT". I have run a RSRV test to find if there is any inconsistency in SID's for 0MAT_PLANT but everything looks great. Considering the time span in mind to finish the load I have removed that record from PSA and re-pushed the data from PSA which was successful, however I wanted to know if anyone has come across such kind of error.
    2. The load finished successfully in the cube but the performance of the cube was very bad coz my cube request shows only 3.5 million records but when I checked in the fact table it was showing double i.e. 7 million records, which is because I deleted the failed init. request and re-pushed the data from PSA. can anyone suggest me how to overcome this I mean how to bring back my fact table records to 3.5 million?
    please advise me and thanks so much!
    Swathi.

    hi Swathi,
    1. for 0mat_plant no sid, beside rsrv, you can try rsd1, infoobject maintenance, there is menu (about 3rd from left) 'fill sid ...'.
    for infocube update, please make sure you 'delete data',
    'fact and dim...'. check again if fact table counts 0 records then you can update from ods with 'initialize'. or if you go by psa then delete data both infocube and ods (from ods to cube should sufficient).
    2. for performance, check in infocube -> manage -> performance, make sure index and statistic is green. you can create index there, also refresh the statistic.
    hope this helps.

  • Deleting Cube data takes up all DIA processes

    Good day
    We are in Bi 7.0 and I have a problem that I cannot find an answer for.
    I have created a process chain where I delete cube data with event "Complete deletion of Data Target Contents" among loading data again etc.. When this process chain starts and get to the deletion part it will use up all the DIA processes in production (SM50) and bring it to its knees for more than an hour. If I do the same thing in DEV and QA, with the same amount of records (1 200 000), then it deletes within a few seconds. I deleted the contents manually in prod as well and the same thing is happening.
    What can I do to rectify this or where can I check why this is happening?
    Thanks in advance.
    Cj

    CJ,
    Have you ever used the transaction RSBATCH?  It controls how many processes are allocated to particular BW batch functions (e.g. DTP loads, Data deletes, etc.).  In RSBATCH, go into  the Mass Maintenance of All Settings for Parallel Processing.  You should be able to find the delete that you're having an issue with by selecting the appropriate process type and the correct process variant.  Compare the settings in Prod to your more manageable settings that exist in Dev and QA.  This would most likely be the place I'd start looking.
    Hope this helps.
    Peace,
    Dan Glick

  • Bex reprort is not fetching data from Aggregates scanning whole cube data

    Hi All,
    I am facing the problem in aggregates..
    For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
    FYI.. Checked the characteristcis is exactely matching with aggregates..
    and also it is giving the message as:
    Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query
    Can some body explain me about this error message.. pls let me know solution asap..
    Thankyou in advance.
    With regards,
    Hari

    Hi,
    Let me start off from basic.
    1) Check the activation of aggregates.
    2) check whether the check box in infocube manage rollup is checked.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Need to check the data flow from R/3 to BW server.

    Hi BI experts,
    This query is regarding need to check the data flow from R/3 to BW server.
    As of now I have some set of reports which I would need to take up in BW. The requirement is  to go through the list of transaction codes for reports in R/3 and find out if there are already  any existing objects in BW system which I can use for these reports.
    So, can u plz help me.

    Depends what are your Tcode or Reports users run in R/3 and they want the same in BW.Then in BI Content we have Out of the box Delivered reports.You can activate those Load data and use it.
    Gimme T-codes you have I can send you Standard reports in BI or Cube you can get these from.
    ~AK

  • Beginner in BPS- Transactional Cube - Data

    Hi All,
    I am presently working on a project on BPS.
    and i am beginner to this area.we are supposed to create some Queries in Bex, I was intially thinking much of knowledge is required about BPS for the work I am doing.
    but in one of the meeting i came to know that, the query in bex takes some of the data from InfoCube ( Transactional ) and some data from BPS.
    Now I am confused. my questions are
    1. Is that the case? some data from Txn InfoCube and some data from BPS? If yes, where from BPS?
    2.whats the source ?
    3.how do we check the data present in BPS?
    4.(and some million q's like this)
    can anyone please answer some of these Questions or redirect me to some of the resources where i can find answer to these questions.
    any kind of help will be appreciated( with points )
    Thanks
    AB

    Hi,
    In BPS while creating the planning area in tcode BPS0, you need to give the transaction cube name .
    The data which you are entering in the layout will be stored in the transaction cube.
    The main difference between the transaction cube and basic cube is that in transaction cube you can read and also write the data and this is not possible with basic cubes as you can only read but cannot write the data.
    We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
    Once you entered the data in BPS layout, you need to swicth the transaction cube to make the request from yellow to green.
    You can use this data for reporting.
    Hope this helps.
    Regards,
    K.Manikandan.

  • Ods to cube  data load verry urgent

    Hallo ALl,
    i have started the int from ods to cube (data packet 1200000) and its talking hell of time there are 85 data packet, can some suggest me how can i seep up the data load.
    regards sanjeev

    hi
    1) Stop the load first.check the job log and st22 if htere any shor dumps
    2) go to the *8 gnerated infosource...
    3) createa New IP.with the option as PSA and datatarget
    4)  it will take little time but it wont fail..
    5) this will process package by package...
    hope it helps
    regards
    AK

  • TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networ

    My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networkl.

    Can't connect to the iTunes Store
    Make sure that time zone is correct in addition to date and time

Maybe you are looking for