Check for MPL status

Hi. Is there an easy way to check if MPL is currently up or down? Is there a table in the database that can tell this status?
We have a file upload process that are automatically picked up by MPL and loaded in staging tables.
Thank you.

I am looking for this information as well, and spl.sh -m isup doesn't work. At least not on Red Hat Linux. This is the output I see here:
*$ spl.sh -m isup*
*111026.11:24:12 <info> Startup/Shutdown logs will go to /spl/CCB231DEV/logs/system/spl.sh.log*
*$*
And the log basically parrots that same info. Any idea on a way to check in this case? I want to be notified if the service drops for any reason, and either attempt to restart it automatically or manually.

Similar Messages

Authorisation check for single status

hi all
i have a requirement which is like i have to maintain authorisation for single user status.right now we are able to do that for multiple statuses only,
if i say i want to aply check for a single status like open only,how can i achieve that if possible.
help will be appreciated
best regards
ashish

Ashish,
How are u doing that check for multiple status?
where ru doing it?
can u give some more details?
Robin

TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.

The command TfsAdmin ProjectServer /RegisterPWA causes next error:
TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.
Project Server returned the following error: "Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.".
(type ProvisionException)
Exception Stack Trace:    at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.HandleSoapException(SoapException soapException, String errorResourceString)
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.IsDBSchemaProvisioned()
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionManager.Provision()
I installed SharePoint 2013 and Project Server 2013 as farm and TFS 2012 and my account has permissions everywhere. I read article
http://msdn.microsoft.com/en-us/library/gg412653.aspx and gave full permissions for TFS account to SQL and Project, Project app pool account to SQL, but still have an error.
How can I find out what exactly permissions are not enough???

The problem was in claims authentication. Changed to Windows and all worked out.

How to check the DTP status (i.e in active mode or not) for the Prior days.

Hi SAP gurus,
How to check the DTP status whether it was in active mode or inactive mode for the prior days ?

Hi Aditya,
Kindly have a look into below links,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00dbbfa9-dba2-2d10-bc80-9d6489e4b1c7?QuickLink=index&overridelayout=true
DTP request Overall status
Hope this helps.
Regards,
Mani

Checking for status of a long-running BPEL process

Hi experts,
I have one BPEL process for originating customers' loan which usually involves various steps which takes around 15-20 mins to complete per instance. I would like to implement a user interface that can check the process's progress and display how it is going to the user.
I have thought of using an asynchronous process that updates a global variable listing status of each step inside the process and use a poller to invoke another operation (like "checkStatus" operation) of this process to retrieve this variable and display the value to the users. It may be achieved by using "OnEvent" activity waiting for "checkStatus" operation. It will run in parallel with the main process, have access to the global variable and reply this variable immediately to the caller.
It sounds like an idea in theory but invoking a web service operation for polling status is very heavy-weight and may impact performance during high-load.
I am just wondering if there is other solution to this problem as I believe the status checking is a very common expected requirement in long-running BPEL process. What might be the best practice to implement this?
Look forward to your responses.
Thanks and regards,
Edited by: Nghia Pham on Nov 5, 2012 4:48 PM

Hi.
I apologize for the slow reply. I am just back from overseas and did not have chance to go to the forum!
Thank you a lot for your responses!
The BAM looks like a suggested out-of-the-box solution. But it ties too much to Oracle API and will be hard to customise the way you want to interpret the status to end-users. If you want to display the process status with BAM in a web application interface, ADF is the only solution (please correct me if I am wrong). I would prefer a stand-alone, free of proprietary API solution so that we can build a screen that is technology-independent. As ADF UI is not our only supported view technology. For example, a PHP web client should be able to interpret the BPEL process status.
Will really appreciate your suggested solution.
Thanks and regards,

Performance check for status control table

Hi,
When ever we activate any ODS or delete the request ,a message 'Performance Check for Status control Table ' appears.
What does it mean?Please explain what is status control table and how it performs?
Thanks & Regards,
Dinakar.

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Bypass material D-Chain specific status check for a particular order type

Hello All,
For a material, I want to by-pass it's D-Chain specific status check for a particular order type.
Currently when you enter the that material in the order, I am getting warning: Material XYZ has status: ABC hold
I want to py-pass this warning message, how to do this? Can we configure this based on order type??
Pls. help me.
Thanks,
Shreekant

Hi Kapil,
Threre are some material for which D-Chain status ( MVKE-VMSTA) in the materila master are set in such a way so that deliveries can not be created. We need to bypass this restriction for couple of delivery types. One of them is the delivery type used for intracompany STO.
I am looking for some way out like user exit so that I dont need to change existing config change for those statuses.
Regards,
Subhankar

ı boughd a mac book pro from canada.would you check my serial number for warranty status?

ı boughd a mac book pro from Canada.would you check my serial number for warranty status?

You can also check this Apple site
https://selfsolve.apple.com/GetWarranty.do

I can't check my shipping status for my iPod touch, it says "Oops, An error has occurred"

I've ordered my iPod touch through the Apple Online Store yesterday and I can't seem to check the shipping status.
Whenever I click into the "track a shipment" page, it just loads very slowly and then comes up with an error saying an error has occurred.
Help, please?
Thanks,
Liang Chun
[EDIT]
Alright, now it shows up "We're sorry. Something went wrong with your request, please try again later."
What do I need to do now?

We have the same problem here in Australia too. I haven't been able to cancel my iPhone 4s I ordered online. I was able to purchase one from a retail store the last thing I need is two iPhone 4s :P

404 status check for external website

Hi,
In my application, i want to check for some external website.
e.g. i have my own application and in that there is a link of some different website i.e. www.yahoo.com. I click that link and in case of 404 error, we should get some customized error page instead of "The page cannot be displayed"
Please let me know if there are any other information you want
~Aman

did you try simply to create the URL:URL yahoo = new URL("http://www.yahoo.com/");and see if this throws an exception or not?
If that isn't enough you could try the create a connection:java.net.URLConnection yc = yahoo.openConnection();greetz

Skype 7.10 application no longer able to log in any user, check for updates, or change online status

Hello Community,
Thanks in advance for looking into my problem report.
First off, I'm running Skype version 7.10 (777) for Mac, on my MacBook Pro Retina running Yosemite 10.10.4. I've been using Skype on this setup flawlessly for months. Recently, after adding some more credit in advance of making an international call (which worked fine), I ran into a weird problem. I can't be more specific about the initial problem, as I kind of dismissed it at the time, but it was some kind of error window from Skype regarding my attempt to add credit (which did work, btw - I see the updated balance and my bank account was debited as intended).
Now however, I cannot use the Skype application in any way. When I attempt to sign in - whether on my account (with the right password or a bogus password), or on another valid account, the application just displays the spinning balls graphic for several minutes and then reverts to the sign in screen. After rebooting my Mac, I was able to use Skype again, but now it's back to this behavior after I quit Skype. I've got a lot of work-in-progress right now and don't want to keep rebooting to try to get past this.
Note that my account/credentials is clearly not the issue; I can use Skype from my iPhone 5S no problem, and from Skype web on the same Mac. But the application itself on my Mac is DOA, whether using my account or another person's. Even the Check for Updates just stalls forever.
I have already downloaded the Skype app again and paved over the old one, and that makes no difference.
I also trashed my Library/Application Support/Skype, and restored a copy from backup prior to this problem, but it made no difference.
I've verified that my Mac firewall is not the issue - I've tried it with the firewall on and off without affect.
If anyone has a clever idea - or knows how I can get some kind of diagnostic log about what the app is doing when it's trying to contact the mother ship - please let me know!
Thanks again
[Topic title updated by moderator to include version number.]

I'll add that when I run devenv.exe with the flag /TFSLink, VS opens a Team Explorer window that contains the following text:
An exception was encountered while constructing the content of this frame. This information is also logged in "C:\Users\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml".Exception details:System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.VisualStudio.Shell.Interop.IVsShell5.LoadPackageWithContext(Guid& packageGuid, Int32 reason, Guid& context) at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.GetPackage() at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConstructContent()

Skype application no longer able to log in any user, check for updates, or change online status

Hello Community, Thanks in advance for looking into my problem report. First off, I'm running Skype version 7.10 (777) for Mac, on my MacBook Pro Retina running Yosemite 10.10.4. I've been using Skype on this setup flawlessly for months. Recently, after adding some more credit in advance of making an international call (which worked fine), I ran into a weird problem. I can't be more specific about the initial problem, as I kind of dismissed it at the time, but it was some kind of error window from Skype regarding my attempt to add credit (which did work, btw - I see the updated balance and my bank account was debited as intended). Now however, I cannot use the Skype application in any way. When I attempt to sign in - whether on my account (with the right password or a bogus password), or on another valid account, the application just displays the spinning balls graphic for several minutes and then reverts to the sign in screen. After rebooting my Mac, I was able to use Skype again, but now it's back to this behavior after I quit Skype. I've got a lot of work-in-progress right now and don't want to keep rebooting to try to get past this. Note that my account/credentials is clearly not the issue; I can use Skype from my iPhone 5S no problem, and from Skype web on the same Mac. But the application itself on my Mac is DOA, whether using my account or another person's. Even the Check for Updates just stalls forever. I have already downloaded the Skype app again and paved over the old one, and that makes no difference. I also trashed my Library/Application Support/Skype, and restored a copy from backup prior to this problem, but it made no difference. I've verified that my Mac firewall is not the issue - I've tried it with the firewall on and off without affect. If anyone has a clever idea - or knows how I can get some kind of diagnostic log about what the app is doing when it's trying to contact the mother ship - please let me know! Thanks again

I'll add that when I run devenv.exe with the flag /TFSLink, VS opens a Team Explorer window that contains the following text:
An exception was encountered while constructing the content of this frame. This information is also logged in "C:\Users\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml".Exception details:System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.VisualStudio.Shell.Interop.IVsShell5.LoadPackageWithContext(Guid& packageGuid, Int32 reason, Guid& context) at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.GetPackage() at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConstructContent()

Check The Job Status

Hi SAPsimhas,
My requirement is as below.
I will loop through an internal table and create some files with background processing method.(JOB_OPEN,SUBMIT & JOB_CLOSE)
Now once this job is triggered I need to check the status for that job after maximum 10 mins. Its not neccessary that each job will take 10 mins. only,It can be finished in 2 mins also.
Once the job is finished then I will XCOM that file.
So my question is how to code such timer which will check the job status for that job? I have a FM BP_JOB_READ which returns the job status.
Reply is highly appriciated.

Try this way
do.
    call function 'SHOW_JOBSTATE'
      exporting
        jobcount         = p_jobc
        jobname          = p_jobn
      importing
        aborted          = v_aborted
        finished         = v_finished
        ready            = v_ready
        running          = v_running
        scheduled        = v_scheduled
      exceptions
        jobcount_missing = 1
        jobname_missing = 2
        job_notex        = 3
        others           = 4.
    if v_aborted eq 'X'.
      exit.
    endif.
    if v_finished eq 'X'.
      select single * from tbtcp into wa_tbtcp1
                 where jobname eq p_jobn
                   and jobcount eq p_jobc.
      if sy-subrc eq 0.
        move wa_tbtcp1-listident to p_spono.
      endif.
      exit.
    endif.
    if v_count le 10.
      call function 'ENQUE_SLEEP'
        exporting
          seconds = 60.
      v_count = v_count + 1.
    endif.
enddo.
a®

5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America

Step 5.
5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America, you can look up a local number here. For now, check out all the great free features of Creative Cloud! Get started with trials
I keep getting this.
The Bank and Paypal states that Adobe needs to process my transaction twice.
I have no order number/ no status nor contact from Adobe. I called customer service and he transferred me to sales where the phone rang with no answer.

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How can i check for posted but not yet commited changes in a form

Dears
I make changes programmatically in a form then i post it using (Post built in).
If the user exits the form, i make check for any changes in the form to commit it using the system variable :system.form_status
Unfortunately the value of this system variable is 'Query' not 'Changed' because of using the post built in.
Is ther another system variable ( or any another way ) that check for posted but not yet commited changes in the form ?
Thanks a lot
Mostafa Abolaynain

I had faced similar situation. Using of package variable which identifies, what is the user's latest action.
This is just a workaround.
Capture what the user has performed into a variable say, PKG_VAR.ACTION,
This will be assigned values like List L, and Create C, Update U and Saved S.
If commit is executed,assing the status S to the variable.
So while closing,
IF :system.form_status = 'CHANGED' or PKG_VAR.ACTION in ('C','U') THEN
-- validate the data, n perform commit.
else
-- just close the form.
end if;
Regards
Deepz : )

Check for MPL status

Similar Messages

Maybe you are looking for