Check for shift seq. valdty maint.in cap header agnst calendar in wrk cntr.

Hi!!!
Factory calendar maintained in capacity header of work center has validity untill 2016, but the capacity for machines is maintained till 31.12.2020. This created problem in CM25 since the capacity interval is maintained outside the range of the factory calendar.
Apparently, there is no check or warning or error when validity of shift sequence is maintained in the "Intervals and Shifts" of capacity header.
Is there a way to check this and give a warning or error when the shift sequence of the "Intervals and Shifts" of capacity header is maintained outside the factory calendar validity (used in capacity header of the work center)?
Thanks in advance.
Warm Regards,
Surajit Das

Dear Chandra,
You are right. Either it may be configuration settings or any master data settings, which will allow to know that the shift intervals validity entered is outside the validity of the factory calendar mentioned in the capacity header of the resource/ work center.
Warm Regards,
Surajit Das

Similar Messages

  • How to check Unissued check number for NON-Seq cheques

    Dear experts,
                            i want to know the unissued cheques for non seq cheques where i issued nearly 900 from 1000 cheques in my cheque lot 1. Just i want to know the cheque number which are not issued.
    Thanks in advance

    Hi,
    You have 2 option
    1. Check in table PAYR in se16 , put check number in descending order and you will find the missing one.
    2.  Check in FCHN enter form and to check number, and find out the missing number
    Regards,
    Shayam

  • Mac OS X 10.6.8, receiving error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted." How to fix?

    When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
    I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
    I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
    I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.

    You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
    After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
    After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
    If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
    If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software.

  • Cannot get new messages to download automatically and auto reply with out of office message have to manually check for new messages to get it to do this

    I am using Mozilla Thunderbird 31.3.0. I know how to create a message filter to set up an auto reply message, but cannot get Mozilla to automatically download new message and auto reply with the message in the filter unless I manually check for new messages, that is the only way to make it work. I have looked online and can't seem to find an answer to this particular issue. According to anything that I have found, I have the correct boxes checked in server settings: check for new messages at startup, automatically check for new messages, check for new messages every x amount of minutes. It's one thing to have to leave my computer on and Thunderbird open to make this work, but to have to manually check for new messages to get the auto response to work defeats the whole purpose of having an auto reply, as I use them for vacations, holidays, etc. I have wondered if there are any security settings that are causing this issue, but if so, I don't know what changes to make to them. Thanks in advance for any help. This is driving me crazy.

    I do find it a bit odd that Thunderbird is not getting mail on schedule, perhaps you have an add-on or anti virus program that prevents that.
    Holding shift while you start Thunderbird will start with add-ons disabled to check if mail come automatically.
    Airmail is right though, use Verizons auto responder. This link might help with that http://www.verizon.com/support/residential/internet/highspeed/account+tools/email+tools/questionsone/85621.htm#
    You say that not having such a setting in Thunderbird is something that needs fixing. This idea comes on the whole because Outlook has such an option. what most people are not aware of it only works with Exchange server. There is no "vacation response" in server mail specifications so every server implements it differently.
    Just as all cars have a radiator, you can not take any radiator and just put it in, they are subtly different even though they perform the same purpose. Same goes for the various vacation responders, They perform the same purpose but they differ between email server software brands.
    Thunderbird leaves it to the server end to expose the functionality, as they are really the only ones who understand what they did. Outlook exposes the option and mostly greys it out.

  • How can I set Firefox update preferences via script so I can configure our 200 Macs to disable checking for updates?

    Most of our Mac users do not have admin privileges. So when they get alerted about Firefox updates, they don't have the ability to install them. We would like to disable Firefox for checking for updates, then push out updates from our software server as needed. We have about 200 machines to configure. Is there a way to disable checking for updates via script (bash or Applescript)? And if so, is there a guide or web site to explain the process?

    Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    * http://kb.mozillazine.org/Locking_preferences
    You can use these functions in mozilla.cfg:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes

  • No confirmation for shift-deleting messages in saved searches

    I have noticed that there is no confirmation for Shift-deleting messages in saved searches, only in regular mail folders. This is rather dangerous.
    I have checked my config editor, and I have have "mail.warn_on_shift_delete" = true, but this seems to apply only to regular mail folders (where I do get the confirmation diaog), not "virtual" ones like saved searches.
    This seems like a bug - at least in my usage of virtual folders they are as real as regular folders, and I would like to have the same level of protection against mistakes there.

    I figured it out.  I had to go to m.google.com/sync in the browser and change a delete setting there.  Don't know how it got switched though.

  • Maximum number of users for server SEQ module exceeded

    Hi ,
    I am getting the below error for optimizer SEQ in SCM 7.0 EHP3 system.
    "Maximum number of user for server SEQ module exceeded"
    But the RFC connection works fine and all are green in /sapapo/opt03.
    Should I increase the user in /sapapo/opt03? for SEQ..and on which column...Maximum slot?
    Thanks in advance

    Can you check this thread:
    maximum number of users for server module SNP exceeded
    Divyanshu

  • My phone won't let me update software. message is-unable to check for update. An error occurred while checking for software update. What is wrong?

    My IPhone won't let me update software. Mess is- unable to check for update. An error occurred while checking for software update. What is wrong?

    amm wait..first download the latest software (7.1.1) from the verified page..
    then after the download completes.. back up ur device !
    then after the back up completes.. turn off ur device
    after that process jst hold down the home button for about 10 seconds and without leaving the button connect the usb cable to the pc. this process takes ur phone to the recovery mode!
    now on the itunes press (shift ) and then click on update it opens some opener of the files now select the latest software that u've jst downloaded from the internet now there go..

  • I don't know why whenever i choose " check for updates " and download itunes 11.1 , it never shows any downloads , and i need itunes 11.1 so i can restore my iphone again .. help please

    I don't know why whenever i choose " check for updates " and download itunes 11.1 on my desktop , it never shows any downloads .. even when i tried downloading it from the website, and i need itunes 11.1 so i can restore my iphone again .. help please

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Error during availability check for order

    Hi PM experts,
    How can I make below warning message (W) to an error message (E)?
    Message no: CO820 (Error during availability check for order)
    Regards,
    Nizam
    PM Consultant

    Hi,
    you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability  against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
    Hope availability check rule is maintained on material master.
    Hope it helps.
    Regards,
    N.Nagaraju

  • Whats the configuration for shift method

    dear all
    could any one  give me the  details of configuration for shift method
    regards
    priya

    Hi,
    Please check if the following threat is helpful:
    Changing Depreciation % by shift factor
    regards Bernhard

  • Where has the 'checking for mail' icon gone?

    Whenever I used to check my mail manually (Comand-Shift-N) an icon to the left of the Inbox would come up to show that mail was checking. If I remember correctly, it was a couple of triangles in a circle that would spin while the process was being executed. It's disappeared now - nothing come up and there's no way of knowing whether Mail is checking for mail or has finished doing so now. Any ideas where this visual indication of when Mail is busy checking for mail might have gone and how I can get it back?
    By the way, what do you call that icon - the one that comes up when a process is being exectued to show you so?

    Yes, that's right - no, it doesn't appear in the mailbox list. Where it used to be, e.g. if you're in Inbox and it's darkened to show it's the folder being viewed, it used to be the right of of 'Inbox' - where, when Mail is NOT checking for mail, there is a circle with a number in the middle of it to show how many unread messages are in the folder... It's that circle (the one showing the number of unread messages when Mail is idle) that used to turn into two spinning triangles when Mail was checking for mail. It's gone, but the circle displaying the number of unread messages is still there.
    It certainly is checking for mail, and receiving everything and doing everything else perfectly. In fact, that's the problem - it's such a reliable and well-behaved program that it seems such a waste of time to worry about silly, niggling little things. But still... Would be nice to have it back. I liked it and miss it.
    Nope, no enhancements; just as it was installed when I took delivery of the computer. Is it possible Firefox has somehow corrupted it?
    All current Apple and Mozilla (Firefox 3.0.11) updates are installed.

  • Thunderbird has stopped checking for new mail on start up.

    After updating to Thunderbird 24.3, the program stopped checking for new mail on start up. I now have to manually click "get Mail" for each email account. I have checked the configuration for each account and check mail on start up is checked.

    couple of possibilities here
    Shift + F5 will get all mail
    I have some general troubleshooting processes here http://thunderbirdtweaks.blogspot.com.au/2014/02/basic-troubleshooting-for-thunderbird.html
    Please post your results.

  • Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Why does "check for updates" not download new version of itunes?

    On windows XP FP 3, if I start Itunes of late I get a messsage that there is a new (10.5.3) version of itunes to download. I agree to download iTunes, and itunes freezes up for a bit, then nothin. Suggestions? I am getting tired of uninstalling and reinstalling every time this happens.

    Check for updates is intended for use after production when we might have small changes to 1-2 files. Our current releases have many changes to many files and might almost be as large as the download. Also, we are still making structural changes to the storage of the code (shifting around preferences, etc). For the Early Adopter Releases, we really want people to download and install in a clean directory. After production, we will support check for update.
    -- Sharon

Maybe you are looking for