Check G/L field status group for Business area

Hi, when I set the buiness area, I set field status group to required for BA field, the setting always check the BA field on accouting doc. But some G/L is automatic posted, always show "Business area is a required field for G/L account ...",
Can you help me to slove, thanks

Check the following issues
1)Check the status of the other GL accounts field status for business areas.
2)Check if there is any validation for GL accounts which can be given without business area.
Hope this helps.
Regards

Similar Messages

  • Field Status Group For MIRO

    Dear Friends
    Pls say me where we can get the field status group for Miro header level where i got a problem to make the business area manditory.
    Regards
    Vinay Bhaskar

    Hi vinay
    for busienss place we can make the field mandatory thorugh validations it is not possible through FSG
    Plz reward the point if it is useflull
    Regards

  • Field Status Group for Special G/L Indicators

    Could you define different field status group for special G/L indicators? My problem is I am using two different special G/L indicators but their recon accounts are assigned with the same field status group. I used the same posting keys as well.  But when it comes to general posting, they have different screen numbers.  One SAPMF05A 303 and the other one is SAPMF05A 304.  How did this happen?

    Hi Noel,
    As you have defined Field Status Group for 2 different SPL GL Indicators then it will create 2 different screens only as it wont consider the reconciliation account.
    Regards
    andrew

  • Carrier Details on Field status group for vendor master

    Hi,
    I have a requirement to make the SCAC and Carrier freight group as required fields on vendor master .
    but the standard SAP system requires/ allows three fields : SCAC , carrier freight group and Service agent procedure group as mandatory to be activated under the 'carrier details ' column in the field status group (transaction OB23 and OBD3).
    I want to know if there is a way to flag just the SCAC and carrier freight group as required fields for entry in vendor master .
    Thanks
    Naga Yarramsetty

    Hi All,
    Thanks for your reply. With user exit and validation, I cannot create mandatory mark in FS00. Actually SAP make this description always mandatory. But there is no mandatory mark in this column. I just want to create mandatory mark in this column. Need you advice.
    Thanks,
    John

  • Difference between field staus group for posting key and GL account

    Hi all,
    can anyone tell me what is the difference of usage for field status group in posting key and GL account as i notice the fileds are the same. during data entry, system will check both field status or how?
    thanks.

    Hi
    Both are to control the field status of the line item.
    But, the FSG of the Posting Key and the GL FSG status should not clash like below.
    Take 'Assignment' field as example :
    Posting key FS - Suppress & GL FS - Required    - will give you error message at the time of posting
    Posting key FS - Required & GL FS - Suppress    - will give you error message at the time of posting
    Otherthan the above, all other combination works
    VVR

  • FI Field Status Group

    Hi,
    I am working on a BDC Program for posting of FI documents. The documents would have one Vendor Line and Multiple G/L line.
    Now now for different G/L lines there can be different G/L accounts and hence there can be different Field Status Group.
    My requirement is that if some how I can read the field status group such that before going for BDC I know which all fields I need to pass or suppress in my program.
    Is there any Function Module which can give me field wise details like which field is suppressed/required or optional??
    I tried reading T004F but this is very difficult to read this table.
    Can some one help me in this regard. Your help would be highly appreciated.
    Please note that I need to work with BDC only. I can not use any other method to post the document because of the business need.
    Regards,
    Lalit

    I can think of one use case where the screen processing provides an advantage: "real time" error correction by the user.
    We have a little program that takes a spreadsheet with fixed column structure and creates one FI document from it. The technique is call transaction mode "E", so business users can correct their wrong G/L accounts or cost centers on the fly, hit enter and proceed. If the data is totally hosed (e.g. balance not zero), they can cancel the whole process, rework their spreadsheet and try again.
    BAPI doesn't offer that
    Thomas

  • Filed status group for Vendorn

    Dear All
    Iam posting an entry through transaction code F-42 by useing the posting Key 37 vendor debit and posting key 27 vendor credit. I want Profit center field in optional which was not their. This is the reason entry is not been posting because i made profit center mandatroy. Now due to not giving the profit center entry is not been posted.
    I check field status group in OBC4, FBKP for posting key. But it is not working.
    Please give me the solution to solve this problem.
    Regards

    HI
    As mentioned by  Gerard  u would find the field for profit centre
    Please check the priorities that you have set.
    The priority would always be  taken as SDRO
    Eg: in obc4 you have mentioned the profit centre suppress and at posting key level you have given as optional u2026.finally the field would be suppress as per the priority rule.
    Suppress and required would lead to error.

  • Custome Fields in Field status groups

    Hi,
    We have defined some custom fields in BSEG table for which we wish to control the field status through Field status groups and Posting keys as well.
    Has some one addressed this requirement before? Please provide me some inputs on this.
    Regards,
    Swapnil

    Please check the your custom fields are added in Coding Block or not. Then these field must appear in the Addition Assignment section of the field status group.
    Regards,
    Gaurav

  • Strange error F5272 with field status group.

    Dear all,
    I faced a strange problem when making manual FI posting through FB01.
    The system issues an error:
    Rules for posting key 27 and acct 60010100 set incorrectly for "PRODPER" field
    Message no. F5272
    Diagnosis
    One of the rules specifies that the field demands a required entry, the other rule says that the field is to be suppressed.
    Procedure
    Correct one of the two rules for the field selection.
    You find the field status group in the G/L account master record:
    Execute function
    You can find the rules for the field status group in the Financial Accounting Implementation Guide in the activity Maintain field status variants.
    You can find the posting key in the Financial Accounting Implementation Guide in the activity
    Define posting key.
    But I could not find the field PRODPER in group status field for G/L account (T-code OBC4) or posting key (T-code OB41). Could you please tell me why the system issues such a strange error?
    I have been searching all day long in forum, but could not find the answer to this question.
    Best regards,
    LInh.

    Check then field status will be same with these two field status OBC4 and OB41 - Posting key.
    The field is "Joint Venture Recovery Indctr" for the field name PRODPER.
    This field must be suppressed in those one and other has another status.
    Check these should be same.
    OB41 - Posting key 27.
    As the field is suppressed here, then it will be also suppressed in OBC4.
    First go to FS00, enter the G/L account, click on the tab Create/bank/interest, then take the Field status group
    Then go to OBC4, Check the field selection group for the field "Joint Venture Recovery Indctr"
    It should be also suppressed. Check the same in your system.

  • Field Status Group influence when Purchase Requisition being created

    Hi!
    I have a requirement from a client regarding the influence of the Field Status Group on Purchasing Documents.
    A Filed Status Group has been created in which has the CO/PP order set as Required entry for the Account Assignment.
    This Group was then assigned to a GL Account.
    When a Goods Receipt (MIGO) against a Purchase Order is entered for a GL which requires an Internal Order, the standard error message "Field Order is a required field for G/L account 0010 4105000100 " (message # F5808) appears if the Account Assignment on the PO is incorrect & no Internal Order has been entered.
    This is fine & is how the system operates as standard.
    However, the requirement from my client is to make this error message appear when a Purchase Requisition is being entered on the system, before it is converted to a PO & then receipted.
    They believe that calling the message at the point of GR is too late in the process.
    Could anyone advise on any possible BAPI, etc which could help us with this requirement??
    Thanks,
    k

    I have gone to the Tcode which has been given,
    In the first field , I have given the company code,
    in the second field , I have given  call Plant (0002)
    Validation ......how do i give the validation please let me know
    With Regards,

  • What is the impact of field status in Field Status Group

    Hi,
    In MIR7, we want to make Cost Center Mandatory. For this we found the option of "Field Status Varient".  We are using "Z004" Field status group in G/L account. In this FSG, we want to change the status of field "Cost Center" as mandatory from Optional.
    We want to know what will be the impact of this change in any other transaction?
    Regards
    Vijay Shind

    Hi

  • Create G/L Account Centrally cant find "Field Status group"

    Dear All,
    When i create G/L Account Centrally i can no t find "Field Status group" as the picture showed. Before i do this, i have already defined the field status groupd and assign this to the company code J610. However i can not find "Field Status group" in Tcode FS00.
    Please help me on this! Very appreciated!

    Hi,
    Please check as per steps given below :
    1. Go to transaction code OBD4
    2. Double Click on Account Group
    3. Double Click on Document Entry
    Check whether Field status group is Suppress.
    Regards,
    Tejas

  • Change G/L Codes Field Status group

    Hi Experts,
    I want to change in G/L Codes Field Status group in Mass. Is their any transaction code for that? Please help me.
    Thanks & Regards,
    Hemant Maurya

    Hello,
    If you have not used mass change earlier, you need to be very careful, as these changes are IRREVERSABLE.
    Accounting => Fianancial Accounting => GL Accounting => Master Data => Collective Processing => Change Company Code data.
    Alternatively, you can use MASS transaction code to change them in mass.
    Regards,
    Ravi

  • List of Field information in Field status group

    Hello guys,
    I'm trying to build a list for several fields when creating a document to see what status (obligatory, disabled, etc.) the field got in several field status groups.
    So the result should look like:
    Field Status Variant
    Field Status Group
    Field
    Status
    0000
    PH01
    ZUONR
    Obligatory
    0000
    PH02
    ZUONR
    Disabled
    0001
    PH01
    ZUONR
    Obligatory
    0001
    PH03
    ZUONR
    Optional
    So I was doing some research here how to get this and I think I almost made it but some final information are not that clear at the moment.
    (1) I read table T004F for getting the pattern of field status group with help of field status variant of company code (T001) and field status group of account (SKB1).
    (2) Then I'm doing convert routine for '+.*' pattern and then know which field position got which status.
    (3) Then I'm trying to match the status with the fields with help of tables TMODF, TMODG, TMODO, TMODP and TMODU, but I am not quite sure how to make it.
    E.g. with help of tables TMODO and TMODP I can find the information which field is which position but it is only about the description of the field, not the technical fieldname. So I also got table TMODU with the technical fieldnames, but there I got several information for one field depending on account type (vendor, account, customer, ...). So which is the right one? Always 'account' even if it is reconciliation account for vendor? And which is the right FAUNA field information? Always 'SKB1-FAUS1' or where do I know which one to take?
    The other way I tried is with function FI_GET_FIELD_SELECTION_STRING to get the pattern. This one depends on posting key to get the pattern. So where is the difference between this one and the manual select in table T004F without posting key?
    Thanks a lot for your help! :-)
    Regards
    Michael

    Gerd,
    Have you tried txn SE41?
    I had to do something similar with tab descriptions for Leads and used SE41.
    I needed to know the program name or search for it. In my case it was SAPLCRM_ACTIVITY_UI then select the radio button 'Function List'.
    Then when in the list you can change the headings.
    Activate it then the new descriptions are available.
    Regards
    David

  • MIRO didnt validate GL field status group

    Is it an SAP standard for MIGO not to read/validate GL account's FSG?
    Scenario:  GL account from PO has field status group Cost center required and WBS suppressed.
    During Invoice user was able to enter WBS data in the WBS column, system should have not allowed use to put WBS since FSG is WBS suppressed.
    When we tried the same scenario in FB50, FB60, FB70
    System won't allow us to enter WBS data in the WBS column, which is correct and should have happened to MIRO
    Thanks in advance to all.

    Does it matter if it was changed?
    The posted GL account has FSG of WBS suppressed, but in FB03 display data entry and GL view posting shows an entry of WBS element.
    Line item display the WBS element is not there since FSG (screen) is WBS suppressed.

Maybe you are looking for

  • I can't open or view RAW files?

    I have two Macs. One is an iMac and one is a Macbook. I usually always use my iMac for photo processing and storage. And I use an external hard drive to store all my photos. Now I recently had to take my macbook with me because I was going out of tow

  • Need Suggestions for Student Computer Lab - Multiple Users on IWeb

    I need some suggestions on how to best show students in the computer lab to save their Domain file to their thumbdrive. It seems some students are saving previous users Domain Files to their thumbdrives. There has to be an easy solution. Students are

  • How to restore an effect on logic pro 9

    For accident i have deleted an efect called Wah and i dont know how to recover it or even where is the location. need a help from a expert.

  • Print Preview of Purchasing Documents too small

    Some of my users are having difficulties with reading the content of Purchasing Document Previews as the font size selected for the documents is quite small. We want to increase the size of text on the screen without changing the document font size.

  • Queue of arrays without dynamic memory allocation

    Hey folks, I'm working on optimizing a timing critical VI. This VI is the producer in a producer consumer architecture. I'm trying to populate a queue from file in a manner that is as efficient as possible. My current plan of attack is: - read block