Check HDD Part Number in Solaris 10 during System Running

Dear all,
Please help me,
I want to check the part number of HDD of Sun Fire V890 Server during system is running by the Solaris OS command. Can we check that part number of HDD by solaris OS command?
Or have other ways, except shutdown the system and unplug the HDD from the Server.
Thanks you and Regards,
Soret,

The following command will list the vendor and product ID for each disk:
iostat -EFrom [Sun Fire[tm] V890 Server, RoHS:YL - Full Components List|http://sunsolve.sun.com/handbook_private/validateUser.do?target=Systems/SunFireV890_R/components#Disks] you should be able to find the matching Manufacturing Part for a given vendor and product ID.

Similar Messages

Check duplicate asset number during MIGO

Hi MM/Abap Gurus ,
What user exit can be used to check duplicate asset number during GR. E.g: I have a PO with same asset number for item line 1 and 2. What user exit can be used to set warning msg if duplicate asset number exits during MIGO. Please advise if there any user exit can be used for my requirement?
Thanks
Mitra

Hi Puspha,
Actually, the scenarios as below:
1. PO created with 1 line item with Acc Assign Cat = A and multiple account assignment. Therefore, under the account assignment tab there are duplicate asset number inputted.
2. Hence, when do GR, the system should prompt warning message " Duplicate asset number exists".
Above are the requirement. I need any user exit that I can use in MIGO, where there is checking on duplicate asset number or during the sving of MIGO, I could inforce a logic on the checking.
Your help appreciated.
Thanks

Change firmware from HPG8 to SN06 of Hdd ST31000340NS (Part number:9CA158-784) size 1tb

Hi all,
Could anyone please help to provide procedure to change firmware from HPG8 to SN06 of Hdd ST31000340NS (Part number:9CA158-784). My controller LSI 3ware 9650SE support SN06 firmware.I am facing raid degraded issue.
Is it recommaded by HP to change firmware if we have any HDD failure.
Thanks,
Amit

Hello Xenpus,
Welcome to the HP Forums!
I understand the computer has a RAID degrading issue. I think that updating the BIOS is a good starting place. But based on what you told me, it seems like there is a hardware issue. If you cannot fix it, I would contact HP phone support for hardware assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Mario
I worked on behalf of HP.

Ibook g4 12.1/1.33 -model M9846LL/A - need hdd ribbon part number!! help!

Hi,
Quick question..
I have an ibook g4 12.1/1.33Mh (model M9846LL/A) that was given to me, it works but but its looking for the system (hard drive) it needs a new hard drive, the problem here is that the old hard drive was taken by the former owner out with the ribbon included and I cant get in tour with him, so I need to get a new ribbon to be able to connect the new hard drive I already have - such thing missin I did not know until I opened the ibook-, I cant find such part number anywhere on the web or where to buy it... can anyone help me on this?, I have taken the hole laptop apart and just waiting for the ribbon.
The part number for the logic board is 820-1832-A if it matters...
Thanks
murillo

Thanks so much for your reply.... after looking around for a few hours I finally got the part I needed and order, this is the one:
http://www.macrecycling.com/hard-drive-connector-ibook-g4-1214-p-100234.html
The last ibook made (12.1/14.1 1..33Mh) was built differently (logic board) and does not use the normal ribbon (like the one you were kind to appoint, this one connect to the other side of the logic board), this logic board does not have other connection for the ribbon, just a straight adapter on the same side where the hdd is located, it just needs an adapter to connect, look at this logic board:
http://www.macrecycling.com/logic-board-133ghz-ibook-g4-12-p-100237.html
This one shows the actual logic board and as you can see the connection is made (on the left side of the picture just above the capacitors)...
Finally I was able to order the part so I should be ok.. thanks so much for your time...
Have a nice weekend.

Replacement for Part number: 431407-001 (HDD)

My hard drive crashed on my DV6000, the part number is 431407-001. Can I replace it with this one:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4950132&csid=ITD&body=MAI...
It has a much larger capacity and is cheaper. It seems to eb the same physical size. Anything else I need to know before I roder it?
This question was solved.
View Solution.

Hi all,
I have the same problem but more than 1 year later... I need to buy another HD for my laptop HP Pavillion and the p/n concerning to the HP support is 431407-001. I don't know if I can use a bigger HD (about 320GB) or this part number is the bigger. It's only 120Gb. I've been looking at Seagate Momentus 5400.6 - 320 GB - 5400 - 8 MB - SATA-300 (ST9320325AS) but HP support says the supported model is the partnumber 431407-001.
Anybody has test another HD for this HP notebook? If you could tell me something more I'll be very happy.
Thanks a lot.

Qosmio X305 - Part number for second HDD case

What is the part number of case for put second HD ?
I need put second HD in my Qosmio, but I don't have case for this.

Hello
I dont know the part number. Here it is a user to user forum and you will not find an notebook technician or ASP here.
In your case I would contact the nearest ASP. They can tell you the part number and order for you.
On the Toshiba website you can search for authorized service provider.
Greets

Satellite P300-1A8 - Part number for AC adapter

Hi.
Can anyone tell me the Part Number of the AC adapter I need to buy for my Satellite P300-1A8?
Model no: PSPCOE-01H008EN 15550/1024/1024/160G54/17W + BT/D52/L/M/W
The toshiba site doesn't list or recognise the model, CarPhone Warehouse didn't provide me with detailed documents, and the original adapter has been stolen. Failing that, can anyone provide an email address for toshiba (I am unable to phone during their office hours).
Or failing that, some general advice on a compatible adapter please, as I bought an adapter of the correct basic specification - 19V, 3.95A, (75W), 2.5/5.5mm connector (the PA3715E-1ACE) however it doesn't work. The toshiba site lists one other adapter of the same specs (the PA3468E-1AC3) but I am reluctant to risk buying it without being sure it is the correct one. I would be happy to buy a universal adapter but only a high quality one that will not be an electrical hazard.
Thanks in advance for any help.
Clare

Hi PinkPanther.
Thanks for the reply and the link. That was the part of the site where I found the AC adapter I thought I needed. I could just go ahead and buy the other one, but these are 70 so I really need it to charge the laptop correctly at that price.
My main problem is that no site is recognizing my laptop model - not Toshiba or the authorized service provider - so I can't find out the exact charger online. The second problem is that I can't phone when their help line is open between 9-6pm M-F, as these are my exact work hours and I have no mobile phone reception.
I have messaged Toshiba though their site, but I haven't received a reply, and the advantage of an email address is that I can check that it has been delivered. I will try to search for the asp now.
And, as you say, the original AC adapter would be much better all round.
Thanks, Clare

Hello, need help finding the right part number etc...HP Pavillion G7 series 1316dx

Hello everyone,
Last resort was everyone on here I tried looking for the part on my own and hope to not waste anyone's time.
I am looking for the correct part number for a LCD Inverter. My laptop screen keeps going black on me. I have shined a light on it and you can still see the screen so it is not the LCD.
Laptop model:
Hp Pavillion G7 Series 1316dx 17" screen.
Thank you.
This question was solved.
View Solution.

HPpavillionguy.
From your manual you do not have an LCD with CCFL inverter for the backlight.
http://h10032.www1.hp.com/ctg/Manual/c03538328.pdf
Page 23 Chapter 3.
You have an LCD backlit with LED's no inverter.
Your part number is.
641395-001
http://www.ebay.com/itm/HP-641395-001-584037-001-641629-001-NEW-17-3-WXGA-LED-LCD-Screen-Glossy-/171...
I do not think we have any more now. "We sold around 35 in 2 weeks."
We were selling used ones for around $45.
And we do not have any more listed on Ebay.
I can check with them in the AM.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Replacement Hard disk for Portege P2010 - Part number required

Can anyone tell me what the part number is for a replacement Hard disk for Portege P2010 is? It has the latest BIOS installed, can the HDD capacity be higher than the original 30gig?
Thanks
Martin

Hi
Like Ivan said, there are no officials documents about a max size of a HDD.
I assume that you can use a 40 GB HDD but Im not 100% sure if the bigger HDDs will work.
Please check this link:
http://www.sparepartswarehouse.com/devicetype-vendor-modelline-modelseries-partlist.aspx?devicetype=0&vendorlevel=ModelSeries &modelseriescatid=50972&partcatid=140744&filter =0
There you will find a 40GB HDD for Protg 2010.

Adding a secondary hard drive to P300 SFF- bracket part number?

Hi,
I have recently purchased a Lenovo Thinstation P300 SFF configured with a single SSD as primary drive and no optical drive. I would like to add a secondary hard drive (for backup purposes) and to adapt 5.25" drive space to 3.5" hard drive size. I presume there is some sort of a bracket that can do this, I need this part number. Any help appreciated. Here is a photo of current configuration http://pho.to/8Nb02

Yeah I don't see that first PN listed at all, and that second PN provided is definitely just a bezel for the front of the system.
I'm still looking into this as the documentation I have isn't fully clear, but I think the FRU you need is 04X2310. From what I can tell, this should come with the 2.5" HDD bracket, 2.5" HDD tray, and screws (if they are needed)
I'm almost wondering if somehow during the communication about ordering parts if the FRU number didn't get a couple of digits transposed or something. I don't see 04X2301 as a valid part at all for what you're doing, but 04X2310 should be the right number.

Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
Crucial Memory gives me this module - is that correct?
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
Found this via Kingstons site - is this also correct?
http://www.dabs.com/productview.aspx?QuickLinx=4P3V
Would really appreciate some official clarification here.
Many Thanks

It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
Anyway I recommend you to buy high quality product like Kingston modules.

Report to find a material by a mfr part number and old material number

Hi,
Is there any standard report to find a material by a mfr part number and old material number ?
For the moment, we are using MM03 to search articles by these selection criterion.
Thanks,
Julien Girard

Hi
As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
Use Txn SQVI, enter the Quick view field say- ZMNFR and click the create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter MARA for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only. Click the tick mark , you will go to the next screen,
You will notice Quick viewer Intial screen
Open the node general material data
Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
Please ensure that you are maintaining both the details in material master basic data1 and purchasing view if you wish to get out output
Best regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:52 AM

Windows 7 64 Bit drivers for Toshiba Satellite C55-A5180 part number PSCJEU-00F001

Toshiba Satellite C55-A5180 part number PSCJEU-00F001
Drivers needed to install Windows 7 64 Bit on Satellite C55-A5180 part number PSCJEU-00F001
Edited to add new location for the video driver
Drivers where downloaded from here http://support.toshiba.com/support/modelHome?freeText=1200008363
And here
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU&selCategory=2&selFamily=2&selS...
And here
http://support.toshiba.com/support/modelHome?freeText=1200007439
And Intel page here
Intel HD graphics driver http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
Toshiba Driver installation instructions
http://support1.toshiba-tro.de/tedd-files2/0/install-20140521160649.zip
Intel Chipset SW Installation Utility http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40216100a.exe
Intel Trusted Execution Engine Interface
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215000b.exe
This post has the video driver - Here
Intel® Iris™ and HD graphics Driver 15.33.22.64.3621 for Windows* 7/8/8.1 64-bit
down the page you will find the driver - win64_153322.exe
Realtek Card Reader
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40217200c.exe
RealTek LAN Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215100c.exe
RealTek wireless LAN Driver
http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=91194
USB3.0 Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40219400c.exe
Synaptics TouchPad Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40213500e.exe
After installing I had to enter the file and run from setup.exe because it did not install from the Toshiba installer, it only unzipped the file and saved it.
You may want to try this older Synaptics touch Pad Driver
http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20130730102013.zip
Toshiba Value added Package
http://support1.toshiba-tro.de/tedd-files2/0/vap-20130916115251.zip
Toshiba Service Station
http://support1.toshiba-tro.de/tedd-files2/0/sest-20130730134053.zip
Toshiba PC Health Monitor
http://support1.toshiba-tro.de/tedd-files2/0/pchm-20130730130641.zip
Toshiba HDD/SDD Alert Utility
http://support1.toshiba-tro.de/tedd-files2/0/hdsdal-20130730121320.zip
Toshiba Peakshift Control
http://support1.toshiba-tro.de/tedd-files2/0/tpsctrl-20130916091602.zip
Toshiba HW setup (Hardware setup)
http://support1.toshiba-tro.de/tedd-files2/0/thws-20130916090522.zip
Toshiba Disc Creator
http://support1.toshiba-tro.de/tedd-files2/0/dcr-20130730110923.zip
Toshiba Web Camera Application works for windows 7 or 8
http://cdgenp01.csd.toshiba.com/content/support/downloads/TC30463200A.exe
Toshiba Video Player
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc30647200a.exe
Toshiba recovery media creator
http://support1.toshiba-tro.de/tedd-files2/0/trmc-20130730133957.zip
All programs seam to work except HWsetup. Flashcards show up when using special function keys except for the volume, the volume special function keys work to turn volume up and down but you don’t see the flash cards, and of course there is no recovery partition so the recovery media creator cannot burn recovery media.
Updated to show instructions and pictures 8-24-2014
Instructions for changeing to from Windows 8 to windows 7.
INSTRUCTIONS:
First - Burn recovery media before you make any changes! -You may want or need to go back to windows 8 later-
Update BIOS to newest bios version, the C55 and possibly other models will not support CSM boot mode with the older bios versions.
Second -
Important Bios changes when changing from Windows 8 to Windows 7:
Completely shut down laptop (Shut down Windows 8 while pressing the Shift key to completely power off.) then restart computer and hold f2 when the screen goes black and wait for the bios setup utility to launch.
Select advanced, then system configuration, then boot mode
UEFI and CSM or legacy (UEFI for Windows 8 and CSM or legacy for windows 7)
For windows 7 change to CSM or Legacy mode.
Third - Also in bios setup utility select - Security, then Secure Boot, then you have to disable secure boot for windows 7.
You will need to delete all partitions before installing windows 7 this is done forth step.
Forth - Insert your windows 7 disc and select custom install, your partitions should show up - click on each one and below you will see advanced drive options, click that and you will have options to format - format each one, then delete each one. You will be left with one raw partition, select to install and windows will do the rest while installing the operating system.
Fifth - install drivers
Installation order is important:
Install chipset driver then video driver before other drivers. Then install Toshiba Value added package before other applications
-See attached pictures that show installed applications-
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
Solved!
Go to Solution.
Attachments:
programs5.png ‏1040 KB
programs3.png ‏193 KB

That should work as well for all the models in part-number family PSCJEU. At least these, probably more..
    Satellite C55-A5104 (PSCJEU-00K00R)
    Satellite C55-A5105 (PSCJEU-00K018)
    Satellite C55-A5180 (PSCJEU-00F001)
    Satellite C55-A5190 (PSCJEU-00L001)
    Satellite C55-A5140 (PSCJEU-00K001)
    Satellite C55-A5137 (PSCJEU-036012)
    Satellite C55T-A5123 (PSCJEU-01G00Q)
-Jerry

Satellite Pro A10 - need a part number for compatible power adapter

My son has the older Toshiba Satellite Pro A10 Intel Celeron 2.0GHZ 256MB 30 GB DVD/CD-RW 14tft monitor.
His power supply is no longer working , can anyone tell me the power adapter part number as i am looking for a new one for him.
I need a part number to go on, and any other compatable power adapters numbers.
Appreciate any help given.
Thanks
jane

Hi Jane,
I believe the part number you need is PA3283E-2ACA
Check it out on the following link :-
http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&pro duct_uid=64945&_LOC=UK

Satellite M50-159: What is the part number of the origanal AC power adapter

My power adapter has broken and up until now i have been using a universal adapter but the connection is loose and takes a while for the orange light to turn on.
My question is what is the part number of the original AC adapter that came with this laptop. I have just ordered what i thought was the correct power adapter part number was PA3468E-1AC3 but the connecter did not fit into my laptop even though the toshiba website said this power adapter was compatible.
Please help
Alex

Hi dear friend,
you had the wrong partnumber. What you need is PA3283U2ACA (K000028790) which is the right one. Heres a link where you can check the connector of the AC-adapter:
http://www.sparepartswarehouse.com/Toshiba,Laptop,Part,K000028790.aspx
I hope you will get what you need. :)
Greets

Check HDD Part Number in Solaris 10 during System Running

Similar Messages

Maybe you are looking for