Check if Equipment(s) already under Contract

Hi ,
In VA41, how can i check and display to my user if the equipment they enter is alredy under a valid contract ? So overlap of contract are avoided .
Is that standard SAP, or sould a do an user-exit ? Has somebody already a code sample , and wich user-exit and tables or function module can be used in order to do the check ?
Thank you, will give points for good and quick answers .

well i dont think standard SAP has any setting where you can check if a material is already under contract , as a same material can have N number of different contracts.
may be you can see if this user exit helps you LWB2B005
Cheers

Similar Messages

Already under contract

The new iPhone price puts in my budget. If you are already under contract with cingular does that mean you can't get it for 199$?

SisterBlue wrote:
We have two iPhones and two non-iPhones on our family plan. For the second iPhone, it's $9.99 per month, plus the $20/month data plan (which seems to be going up to $30 for the 3G iPhone).
-SB
Wait do you pay $20 for data for each phone or is it $20 total for both?

Switching phones #'s for phones on my plan under contract?

My husband recently took a position with his company that will give him a cell phone. He would like to port his phone # over to his company account
(which is also Verizon). I have an added line on the account already that is not under contract. Could I delete that line and use the other phone # to fill out the remaining contract on my husbands phone?

No, you can't swap contracts between lines on the same Verizon Wireless account.

Billing under Contract

Hi all,
This is regarding Billing (partially or fully) billing a customer who is under contract.
Scenario:
1. Equipment is under contract
2. Few spares / services are covered under contract - should not be billied during contract period
3. Some spares / Services are not covered in contract - Should be billed at an agreed price
4.The Engineer or the planner may not be aware which are chargeable / unchargeable items / services
5. System should Create the bill based on the terms maintained in the contract
Can anybody please review the below process flow and correct If anywhere I am wrong?
1. Creating a contract VA41 with Service product as line items
2. Attach the Equipment to the Line item
3. Maintain the pricing agreements for the line item
4. Maintain agreed price for all the spares / services - ie.maintain zero (0) price for non-chargeable items
5. Create the bill (one time bill in advance - no Periodic billing)
Whenever there is a complaint from Customer
6. Create Notification and Service order
7. Plan all the spares / services in the Service order
8. Time and material confirmation against the service order
9. Run DP90 for DMR - Should fetch the price from Pricing agreement maintained in the Contract
10. Settle the Service order to the Service contract line item
I could not try this in our work place but I outlined process flow. Please let me know actual process
Thanks,
Pranav

Hi Pranav,
Your process steps looks okay. Please make sure that the Contract number is referenced in the Notification/Service order. DP90 reads the Cost in the service order and populates the suitable Material you had assigned in the DIP profile in the DMR. The pricing procedure assigned to the DMR reads the contractual conditions from the Contracts and determines the price according to the Condition record you had maintained for the condition types.Alternatively If you want to give zero $ for some spares,you need to maintain condition record with 100% discount for those materials/customer combination.Hope this helps.
Regards,
AlexPr

No detiles under contract

Hello
Customer add contract to his profile , when he open contract there is no data under contract ( SN, Start date, end date ,,,, etc ) ,
that't contract below to him and it's still active , ( we facing the same problem with all existing contracts in profile),
Thanks & regrads
Ali

It seems like there are a couple different issues here from my experience.
When you get the Having Trouble Logging in page, this was probably a reset of your access that caused something in your profile to change incorrectly. My advice would be to use this link (http://www.cisco.com/cisco/psn/web/workspace) to open a case with the correct support team. Not sure why they are advising you to use the forums when it doesnt even look like they are monitoring the forums.
As far as the other error goes:
"No records retieved for display. This item was not found is in an inactive status,or has access issues.Please modify & resubmit your search" This is most likely due to the fact that the contract and the products on the contract are no longer in an active status. This could be because another partner has taken over the devices or simply because they are in an OVERDUE or EXPIRED status. Easy way to check on the coverage of this item, would just be to quote it again and see what kind of coverage dates it's pulling. If it's pulling a date in the past it's in an expired status, a date in the future it's probably a takeover.
Hope this helps!
Zach

Phone under contract

I recently purchased a iphone 4 off ebay. It was listed as new, however after the purchase I noticed the seller noted "This phone is new but under contract". When I contacted him, he told me that the phone has been activated; I haven't received it yet. I want to use the phone on page plus. Should I expect issues when I go to register the phone? Thanks,
ron

prince55 wrote:
I recently purchased a iphone 4 off ebay. It was listed as new, however after the purchase I noticed the seller noted "This phone is new but under contract". When I contacted him, he told me that the phone has been activated; I haven't received it yet. I want to use the phone on page plus. Should I expect issues when I go to register the phone? Thanks,
ron
Never but never buy an already "active" phone from any where unless it is purchased at the wireless company with you standing there. Get your money back now, have ebay suspend the account of the seller and take a common sense class to learn how not to get taken.

Add field Previous owner in Customer Equipment Card and Service Contract

Functionality for Customer Equipment Card and Service Contract
-- Version: (Please provide the current version)
2007-PL44
-- Description of requirements: (Please provide a detailed description)
Add a field in the Customer Equipment Card and Service Contract called: Previous owner (with orange arrow to see BP card). The BP code of the previous owner should be transferred to this field.
-- Valid as of: (Date that this legal requirement is applicable)
2009-05-01
-- Business needs: (Please describe the impact on your business, if the functionality is not realized)
When 50 instruments go to another BP we have to alter 200 records (close 50 CEC and 50 Contracts of the current BP - add 50 CEC and 50 Contracts to the new BP). This takes some hours to do the change.
-- Examples: (Please describe a typical example, how the functionality should work.)
If you want to know the previous owner of an instrument then this information should be visible in the CEC and Serive Contract screen in the field Previous Owner (add orange arrow to it as well). You should not have to close the CEC and Contract, but be able to overwrite it with the new BP code (like it was in version 2005).
-- Current Workaround: (Please describe the workarounds you are using at the moment)
First close all the CEC and Contracts of the current BP and add new CEC and Contracts to the new BP
-- Proposed solution: (Please suggest how the new functionality should work)
Enter the new BP in the Customer Equipment Card and Actualize. A screen should pop up with a warning: This equipment card will be transferred to business partner C1000. Business partner C1001 will be the previous owner. Ok?
The same for the Service contract.

Hi,
It seems that you have posted your Requirement request as it is...
I have the same kind of requirement, If you have done already please let me know you method.
Thanks in advance,
Babu.K
Edited by: BabuCS on Jul 28, 2009 12:03 PM

Equipment card has valid contracts [Message 3676-12]

Hi, Expert,
We have recently upgrade to SAP Business One 2007 A (8.00.178) SP: 00 PL: 42, we found out there is a spelling mistake in Customer Name in Customer Equipment Card, we try to amend the mistake but somehow the system does not allow us to save and display the error message "Equipment card has valid contracts [Message 3676-12]".
Please help.
Regards,
Ng

Hi there
It will not be possible to change the Name or the Item Description to a Customer Equipment Card that is linked to an existing Service Contract or to Service Calls.
it is how the system behaves currently, and a patch level issue
for workaround you can check it out if that is attached to a service call or contract
Thanks
Rizz

One line out of contract, can I cancel another line under contract without ETF?

I've seen many people asking this question, but the answer was different from what I heard from the chat with CSR.
So, does this idea work?
I have three lines on my account.
A - Upgrade available in 10/2012 (contract ends on similar date)
B - Upgrade available in 10/2013 (contract ends on similar date)
C - Upgrade available as of now (contract ended)
Basically, I have one line that's out of contract.
Since I have one line that's done with the contract, can I cancel one line even though it's still under contract from my account?
I thought this wasn't allowed, but in my recent chat with CSR named Cassey(she said she left notation about our conversation), she said it is possible and was so sure about that.
I was in the exact same situation back in March when I cancelled 4th line I used to have in my account.
I was told it couldn't be done that way and had to wait for a couple month with the charges.
Please clear this up so that I could take an appropriate action.

hwangong wrote:
So, is the answer "no"?
I can't cancel a line as long as it's under contract even though I have another line that's out of contract? Correct - the contract, or agreement is to keep a line of service active for 24 months after the upgrade (or purchase of a subsidized/discounted phone). If the 24 months is not up, and you cancel that line, there will be an ETF based on the # of months out of the 24 that were fulfilled.
Then, I really wish there is a way I can talk to the rep I chatted.
I triple checked with her, she said I could do that, and she was so sure about it. Maybe she misunderstood the question?? Though it seems pretty clear to me what you are asking, and it's just as clear it's not the way it works! The contract is on the line of service, and tied to that phone number.

Verizon iPad 3 has no LTE coverage unless under contract?

I just spent a frustrating 30 minutes with 2 Verizon wireless reps over the issue of LTE coverage for my iPad 3 at my house.
Basically, I was told that I don't have LTE coverage because iPads are "prepaid" and not under contract. Therefore I can't use the 4D LTE button on their website to determine LTE signal strength or coverage on their map and instead I need to click on The Prepaid button which does not show LTE coverage. The Apple Store website links to the Verizon Map with the LTE button pre-selected and it was the info I used to make the choice away from AT&T.
Has anyone else experienced this situation? I spoke to 2 reps including a supervisor named Tim from the Colorado Center who refused to give his last name.
What do I do now? Is Apple aware of this? Has anyone else experienced this???

Thanks Meg for you interest in my plight. I will attempt to clarify further.
At my location of interest, I get only 2 bars and 95% of the time my Verizon iPad 3 only gets slow 3G service. Every once in a while, at random and for short periods, LTE service latches on but doesn't last long. Allowing Data Roaming makes no difference.
In order to determine what was wrong I first called Verizon to make sure it was not a temporary problem with one of their towers. If they had told me their equipment was in top shape and confirmed that my signal was supposed to be strong in my area (as per their coverage map) then my next stop would have been the Apple Store down the street.
I am familiar with the map at:
http://www.verizonwireless.com/wireless-coverage-area-map.shtml
That is the map linked-to by the Apple Store and the one I used to make sure Verizon offered strong LTE coverage in my area. I live in the middle of a major metro area (33143, Miami-Dade, Florida) and selecting the "4D LTE button" button on the Verizon wireless coverage area map indicates complete, darkest color, top tier, strong coverage for my area and miles around. Based on this information I decided to purchase my iPad 3 with the Verizon circuitry.
The surprise started when the Verizon rep stated that their internal system showed no LTE coverage in my area for Prepaid plans AT ALL. As proof they indicated that as a Prepaid customer I could NOT click on the 4D LTE button on the Verizon wireless coverage area map because that button only applied to contract customers. I had to click on the Prepaid button and that was the end of that. This was confirmed by the supervisor called Tim from the Colorado Branch office. No further recourse.
So I am upset and a bit confused at the moment. At the time of purchase Apple sends me to a Verizon map with the 4D LTE button pre-selected ... but that's not the button you are supposed to use according to Verizon. I am in the middle of a prime city with top Verizon LTE coverage (alledgedly) but can't access it unless I get a 2-year contract. Can this be considered bait and switch? Any class-action lawyers out there?
I just want my LTE.
Caveat Emptor?

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

How to check if the file already exists in the client directory

Hi all.
I'm on devsuite 10g. I'm using webutil to download files from DB using webutil function db_to_client.
What I need is to check if the file already exists in the client directory and if yes to display a message to ask the user if he wants to overwrite or no. How can I make this???
Here is the code that I'm using to download the file.
Thanks all for the collaboration.
Fabrizio
declare
file_path varchar2(2000) := null;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
/** I download the file from DB to client **/
if webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
else
msg_alert('Si è verificato il seguente errore in fase di download '||SQLERRM,'I',false);
end if;
end;

How about something like the below:
Note: I have a yes/no alert to asking if they want to over-write the existing file.
DECLARE
file_path VARCHAR2(2000) := null;
over_write BOOLEAN := TRUE;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
IF webutil.file_exists(file_path) THEN
/** check a file by the same name exists in the selected directory **/
IF show_alert('Ask_overright') != alert_button1 THEN
/** If we say no then set over_write value to false **/
over_write := FALSE;
END IF;
END IF;
IF over_write THEN
/** I download the file from DB to client **/
IF webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
ELSE
msg_alert('Si è verificato il seguente errore in fase di'
||' download '||SQLERRM,'I',false);
END IF
END IF;
END;
cheers
Q

Function module in Infotyp which checks if identical data already exists

I want to create a new hr master data (tcode pa30) for Hans Müller in e.g Company X and fill out the necessary fields in Infotype 0001,0002 (Name, Birthdate, etc. ) u2013 done !
After creating the new hr master data for Hans Müller Iu2019d like to fill out a special Infotyp (0032) namely Internal Data.
PROBLEM:
While filling out the IT 0032 I do not know if the person - Iu2019ve created a new master data for - is already existing in the system ( but in other e.g Company Z) .
So what I need is a function modul in the Infotype 0032 which checks if there is already a person with the same data existing in any company (the whole data bank) using 3 characters from Infotype 0002 (Personal Data) namely , First name, Last name, Birthd. .
And if a person with the same first name ,last name and birthday is already existing the function module should link to that one or just show me a information.
Also tried to show you my problem on a graphic,
Function_Module_Infotyp0032.png
I hope you can help me. I would be very thankful for any hints , information or programming approach.
Regards
Sean

the problem with your solution approach is that there could be different pers. no. for the same person in my issue.
If I understood you well, that won't be a problem, since you already know which PERNR to use (The one you are using to update IT0032) In that case you only have to check if for that PERNR more than one record in PA0001 with different Company Code is present.
If your problem is that another person with the same name and same date of birth is active in the system with different Company Codes it would be similar.
For instance: Let's say that you find 2 different PERNRs for a given Name and Date of Birth in PA0002, then you can check IT0001 and look for the BUKRS value for those 2 Personel Numbers. If the values found are different you can raise the error message or whatever you need.

Officially Under Contract...Praying

Officially under contract, lender has received all requested documents to this point. So nervous and scared he said they will put everything together to then go to underwriting. So nervous, I am just so afraid this will not happen us. Praying everything goes well. What all could go wrong?

Jess21 wrote:
Weatherguy wrote:
DallasLoanGuy wrote:
Weatherguy wrote:
dpeezy wrote:
Weatherguy wrote:
Jess21 wrote:
hmm im lost again...what do you mean source? sorry im new to all this terminology. Also the money we are using for down payment is from savings and it is a savings account, not related to my husbands paycheck really.Also, the funds used for downpayment and closing must be seasoned and from a qualifying source. 60 days is considered seasoned. I think you mean seasoned or from a qualifying source.Season and qualifying source because there are some loans where gift funds can't be used even if it's seasoned. how far back beyond 60 days of seasoning will they go to source funds for these programs? If the Lender is Chase they may ask one to provide statements for 12 months. If they see big deposits they'd want you to source them. wow thats brutal.Yup, Chase has a lot of liabilties, so they have to be very careful to not make loans that may end up in foreclosure.

My bill is just too high! What is the cheapest way to switch if I'm still under contract?

I have four lines. It is costing me $260 a month for unlimited talk and text, and 6G shared data. It is killing me to keep this up, but I still need my lines. I'm researching other carriers to see if I can get my bill to $150 or less. There are options, but after October I will still have one line under contract. Can anyone guess what my early termination fee would be at that time?

When you log into the MyVerizon account for the account owner, go to change features. At the top will be an option to add a line fee discount if it is not under contract. Click on that. You would have to do it for each line which is not under contract. With a 6 GB shared data allowance, you would get a discount of $10/line not under contract.
Depending on how many lines you have out of contract, it MAY be beneficial to increase your data allowance to 10 GB/month. If you have a 10 GB/month data allowance, you would get a discount of $25/month/line. The increase in cost from 6 GB to 10 GB would only be $20/month(6 GB cost = $80/month, 10 GB cost = $100/month) but if you have 2 lines out of contract, the increase in discount would be $30/month(2 x $10/month discount = $20/month, 2 x $25/month discount = $50/month). When you get another line out of contract, your discount would increase each month by either $10 or $25 depending on you data allowance.

Check if Equipment(s) already under Contract

Similar Messages

Maybe you are looking for