Check if function is not being used

Hey all,
I am wondering if there is a way to write an if statement that asks if a function is not currently being used. For instance, I have a couple of movie clips. If one is clicked, I have a mouse event function that does something. I also have a boolean called selected, which traces if it is currently the movie clip clicked. When I click another one, the boolean is returning true to a movie clip that I clicked previously. Meaning it's not the currently selected one. This always happen especially the first tile I click when the game starts.

if you are using MovieClips you can dynamically create any property you need.
So instead of storing the selected property on the application level you could attach a selected property to each of your movieclips
Then push all your MovieClips into an Array and when you select a MovieClip, parse through the array and set all the mcs selected property to false (except the one you clicked last)

Similar Messages

How to check customer reference no. not being use more than once

I have the following situation and appreciate if some one could show me a simple solution.
On the Sales order window, when user enter a value for Customer Ref. No, check if the entered value has already been used on any existing Sales Order, and give message eg. this Ref. No already been used in SO. 257
What is the easiest way of implementing the validation?
Using Formatted Search?
Triggers or Stored Procedure?
Or one must go about doing this simple task using SDK, DIAPI?
sample code illustrating solution would be much appreciated.
I tried to create a query and used it with Formatted search on the Field, but failed on an error.
the code using temporary hard coded value instead of $[$x.0.0] looks like this
if (SELECT    COUNT(*)
FROM         dbo.ORDR
WHERE     (NumAtCard = 'AAA' and CardCode ='1234')
) =0
     Begin
                   select 'AAA' --redisplay value
     end
else
              begin
SELECT     TOP 1 'already used in SO '+ Convert(Char(3),DocEntry)
FROM        dbo.ORDR
WHERE     (NumAtCard = 'AAA')
         end
where 'AAA' is the reference no. to check for customer '1234', this code works when I run it in SQL query analyser, but failed when I run it as query in Business one. the idea was to redisplay the entered No. 'AAA' if it is not found in any existing SO for cust ='1234'
can anyone point out what the error is or show alternative code for the query.
thanks

Hi Andy,
I believe the best way to do this is probably to use the SDK as (to my knowledge) this is the only way you can get a message to be displayed and to stop the actual processing of the document.
If you want to go the formatted search route I would suggest you change your query a bit. I have played with your query and the following is an example as I got it working in SBO. I think SBO gets confused if there is more than one select statement that returns a result and I have started using variables to save the results of the select statements in.
[code]Declare @Val varchar(100)
declare @Count integer
set @Val = $[$14.0.0]
if (SELECT COUNT(*) FROM dbo.ORDR WHERE (NumAtCard = @Val and CardCode = $[$4.0.0])) > 0
begin
SELECT TOP 1 @Val = 'already used in SO '+ Convert(Char(3),DocEntry) FROM dbo.ORDR WHERE (NumAtCard = @Val)
end
select @Val[/code]
I hope it helps a bit,
Adele

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

How to check if a database was not being used since past 90 days ?

Team ,
Thanks for your help in advance !
I'm looking out for some pointers to determine if a database was NOT BEING Used since last 90 days so that we can decommission them .
Rajkumar Yelugu

My personal method which I apply after mailing to all users and managers and after using methods fellow answeres have given
Take database offline or in a single user mode and keep it like that for 15-20 days if someone is using it they would surely ping you or mail you. Please mail to all repective persons and app owners before taking it offline. As you said you want to decommission
it so i assume server will be less utilized itself.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Materialized view not being used in the report

I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!

The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/

Target parameter is not being used

Hello,
while activating the transformation, i get an error saying" Target parameter 0058 is not being used". I have checked all the rules, infoObjects etc. but still im not able to activate the transformation at all.
Eventhough the source field-target field mapping is correct, the system is throwing such errors. What could be the possible cause of it. Any idea?
Regards Sucheta

Hello Sarvanan,
What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
still could you pls throw some light on Unit/Currency objects that u mentioned..??
Thanks in adv.
Sucheta

[Solved] Xorg log says Option "AccelMethod" is not being used

I am using Arch for about 3 weeks now. I initially got some problems for setting up my xorg.conf with correct resolution but i solved it.
Today i looked my Xorg.0.log and find that Option "AccelMethod" is not being used.
So please help me in setting up my xorg.conf correctly.
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri2"
Load "record"
Load "glx"
Load "dri"
Load "dbe"
Load "ddc"
Load "i2c"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 80.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
#Option "RenderAccel" "true"
Option "AccelMethod" "UXA"
#Option "ExaNoComposite" "false"
Option "DRI" "true"
Identifier "Card0"
DRIVER "intel"
VendorName "Intel Corporation"
BoardName "82946GZ/GL Integrated Graphics Controller"
BusID "PCI:0:2:0"
#Option "PanelSize" "1024x768"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
My Xorg.0.log is
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux puvana 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 12:36:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2972:8086:5354 Intel Corporation 82946GZ/GL Integrated Graphics Controller rev 2, Mem @ 0x50100000/1048576, 0x40000000/268435456, I/O @ 0x000020e0/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
(--) intel(0): Chipset: "946GZ"
(--) intel(0): Linear framebuffer at 0x40000000
(--) intel(0): IO registers at addr 0x50100000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Output VGA connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (310, 230) mm
(**) intel(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000307
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00a9efff: front buffer (3072 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 312 x 234
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event14"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
lved
Last edited by bharani (2009-08-02 11:49:37)

The latest intel drivers only support UXA, so any AccelMethod option is ignored, as you can't set anything else than UXA.

Index not being used in group by.

Here is the scenario with examples. Big table 333 to 500 million rows in the table. Statistics are gathered. Histograms are there. Index is not being used though. Why?
CREATE TABLE "XXFOCUS"."some_huge_data_table"
   ( "ORG_ID" NUMBER NOT NULL ENABLE,
"PARTNERID" VARCHAR2(30) NOT NULL ENABLE,
"EDI_END_DATE" DATE NOT NULL ENABLE,
"CUSTOMER_ITEM_NUMBER" VARCHAR2(50) NOT NULL ENABLE,
"STORE_NUMBER" VARCHAR2(10) NOT NULL ENABLE,
"EDI_START_DATE" DATE,
"QTY_SOLD_UNIT" NUMBER(7,0),
"QTY_ON_ORDER_UNIT" NUMBER(7,0),
"QTY_ON_ORDER_AMT" NUMBER(10,2),
"QTY_ON_HAND_AMT" NUMBER(10,2),
"QTY_ON_HAND_UNIT" NUMBER(7,0),
"QTY_SOLD_AMT" NUMBER(10,2),
"QTY_RECEIVED_UNIT" NUMBER(7,0),
"QTY_RECEIVED_AMT" NUMBER(10,2),
"QTY_REQUISITION_RDC_UNIT" NUMBER(7,0),
     "QTY_REQUISITION_RDC_AMT" NUMBER(10,2),
     "QTY_REQUISITION_RCVD_UNIT" NUMBER(7,0),
     "QTY_REQUISITION_RCVD_AMT" NUMBER(10,2),
     "INSERTED_DATE" DATE,
     "UPDATED_DATE" DATE,
     "CUSTOMER_WEEK" NUMBER,
     "CUSTOMER_MONTH" NUMBER,
     "CUSTOMER_QUARTER" NUMBER,
     "CUSTOMER_YEAR" NUMBER,
     "CUSTOMER_ID" NUMBER,
     "MONTH_NAME" VARCHAR2(3),
     "ORG_WEEK" NUMBER,
     "ORG_MONTH" NUMBER,
     "ORG_QUARTER" NUMBER,
     "ORG_YEAR" NUMBER,
     "SITE_ID" NUMBER,
     "ITEM_ID" NUMBER,
     "ITEM_COST" NUMBER,
     "UNIT_PRICE" NUMBER,
      CONSTRAINT "some_huge_data_table_PK" PRIMARY KEY ("ORG_ID", "PARTNERID", "EDI_END_DATE", "CUSTOMER_ITEM_NUMBER", "STORE_NUMBER")
USING INDEX TABLESPACE "xxxxx" ENABLE,
      CONSTRAINT "some_huge_data_table_CK_START_DATE" CHECK (edi_end_date - edi_start_date = 6) ENABLE
SQL*Plus: Release 11.2.0.2.0 Production on Fri Sep 14 12:11:16 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> SELECT num_rows FROM user_tables s WHERE s.table_name = 'some_huge_data_table';
NUM_ROWS
333338434
SQL> SELECT MAX(edi_end_date)
2    FROM some_huge_data_table p
3   WHERE p.org_id = some_number
4     AND p.partnerid = 'some_string';
MAX(EDI_E
13-MAY-12
Elapsed: 00:00:00.00
SQL> explain plan for
2 SELECT MAX(edi_end_date)
3    FROM some_huge_data_table p
4   WHERE p.org_id = some_number
5     AND p.partnerid = 'some_string';
Explained.
SQL> /
PLAN_TABLE_OUTPUT
Plan hash value: 2104157595
| Id | Operation                    | Name        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT             |             |     1 |    22 |     4   (0)| 00:00:01 |
|   1 | SORT AGGREGATE              |             |     1 |    22 |            |          |
|   2 |   FIRST ROW                  |             |     1 |    22 |     4   (0)| 00:00:01 |
|* 3 |    INDEX RANGE SCAN (MIN/MAX)| some_huge_data_table_PK |     1 |    22 |     4   (0)| 00:00:01 |
SQL> explain plan for
2 SELECT MAX(edi_end_date),
3         org_id,
4         partnerid
5    FROM some_huge_data_table
6   GROUP BY org_id,
7            partnerid;
Explained.
PLAN_TABLE_OUTPUT
Plan hash value: 3950336305
| Id | Operation          | Name     | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT   |          |     2 |    44 | 1605K (1)| 05:21:03 |
|   1 | HASH GROUP BY     |          |     2 |    44 | 1605K (1)| 05:21:03 |
|   2 |   TABLE ACCESS FULL| some_huge_data_table |   333M| 6993M| 1592K (1)| 05:18:33 |
-------------------------------------------------------------------------------                     Why wouldn't it use the index in the group by? If I write a loop to query for different partnerid (there are only three), the whole things takes less than a second. Any help is appreciated.
btw, I gave the index hint too. Didn't work. Version mentioned in the example.
Edited by: RPuttagunta on Sep 14, 2012 11:24 AM
Edited by: RPuttagunta on Sep 14, 2012 11:26 AM
the actual names are 'scrubbed' for obvious reasons. Don't worry, I didn't name the tables in mixed case.

Jonathan,
Thank you for your input. Forgot about this issue since ended up creating an MV since, the view was slower. But either way, I am curious. Here are the results for your questions.
SQL> SELECT last_analyzed,
2         blocks
3    FROM user_tables s
4   WHERE s.table_name = 'huge_data';
LAST_ANAL     BLOCKS
14-MAY-12    5869281
SQL> SELECT last_analyzed,
2         leaf_blocks
3    FROM user_indexes i
4   WHERE i.table_name = 'huge_data';
LAST_ANAL LEAF_BLOCKS
14-MAY-12     2887925
SQL>It looks like stale statistics from the last_analyzed, but, they really aren't. This is a development database and that was the last time around which it was refreshed. And the stats are right (at least the approx_no_of_blocks and num_rows etc).
No other data came into the table after.
Also,
1). I thought I don't have any particular optimizer parameters, but, checking back I do. fastfull_scan_enabled = false. Could that be it?
SQL> SELECT a.name,
2         a.value,
3         a.display_value,
4         a.isdefault,
5         a.isses_modifiable
6    FROM v$parameter a
7   WHERE a.name LIKE '\_%' ESCAPE '\';
NAME                           VALUE                          DISPLAY_VALUE   ISDEFAULT       ISSES
_disable_fast_validate         TRUE                           TRUE            FALSE           TRUE
_system_trig_enabled           TRUE                           TRUE            FALSE           FALSE
_sort_elimination_cost_ratio   5                              5               FALSE           TRUE
_b_tree_bitmap_plans           FALSE                          FALSE           FALSE           TRUE
_fast_full_scan_enabled        FALSE                          FALSE           FALSE           TRUE
_index_join_enabled            FALSE                          FALSE           FALSE           TRUE
_like_with_bind_as_equality    TRUE                           TRUE            FALSE           TRUE
_optimizer_autostats_job       FALSE                          FALSE           FALSE           FALSE
_connect_by_use_union_all      OLD_PLAN_MODE                  OLD_PLAN_MODE   FALSE           TRUE
_trace_files_public            TRUE                           TRUE            FALSE           FALSE
10 rows selected.
SQL>As, you might have guessed, I am not the dba for this db. Should pay more attention to these optimizer parameters.
I know why we had to set connectby_use_union_all hint (due to a bug in 11gR2).
Also, vaguely remember something about the disablefast_validate (something about another major db bug in 11gR2 again), but, not sure why those other parameters are set.
2). Also, I have tried this
SQL> SELECT /*+ index_ss(huge_data_pk) gather_plan_statistics*/
2   MAX(edi_end_date),
3   org_id,
4   partnerid
5    FROM huge_data
6   GROUP BY org_id,
7            partnerid;
MAX(EDI_E     ORG_ID PARTNERID
2 rows
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(null,null,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID f3kk8skdyvz7c, child number 0
SELECT /*+ index_ss(huge_data_pk) gather_plan_statistics*/
MAX(edi_end_date), org_id, partnerid   FROM huge_data GROUP BY
org_id,           partnerid
Plan hash value: 3950336305
| Id | Operation          | Name     | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads | OMem | 1Mem | Used-Mem |
PLAN_TABLE_OUTPUT
|   0 | SELECT STATEMENT   |          |      1 |        |      2 |00:05:11.31 |    5905K|   5897K|    | |          |
|   1 | HASH GROUP BY     |          |      1 |      2 |      2 |00:05:11.31 |    5905K|   5897K|   964K|   964K| 2304K (0)|
|   2 |   TABLE ACCESS FULL| hug_DATA |      1 |    333M|    334M|00:04:31.44 |    5905K|   5897K|    | |          |
16 rows selected.But, then, I tried this too.
SQL> alter session set "_fast_full_scan_enabled"=true;
Session altered.
SQL> SELECT MAX(edi_end_date),
2         org_id,
3         partnerid
4    FROM hug_data
5   GROUP BY org_id,
6            partnerid;
MAX(EDI_E     ORG_ID PARTNERID
2 rowsAnd this took around 5 minutes too.
PS: This has nothing to do with original question, but, it is plausible to derive the 'huge_data' table name from the sql_id? Just curious.

Fairly new battery not charging after not being used for a while

My computer (Elitebook 2530p) has not been used for a while, perhaps a month or two. The battery used to hold for over 3 hours of light use.
Now, the battery won't charge with the message "0% available (plugged in, not charging)"
I can't find a battery refresh utility in the BIOS, or any way to interact with the battery. Is there something I'm missing? Should the battery just go dead after not being used for a while?
Update: fixed typo

I've run the HP battery check and got the code REOOW. Battery is dead, and I am out of warranty. I can't think of any possible reason why this should have happened.
What does this code (REOOW) mean?

Why is the template not being used when dynamic page called ?

Hi,
I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
Why is the template not being used ? How can I get the template working when I call the dynamic page ?
I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
thanks,
Mainak

You can alter the generated package body to include the following function in the header and footer sections.
Header:
PORTAL.wwv_headings.show_header(
p_template => 'PUBLIC.TEMPLATE_3',
p_heading => 'Dynamic Page',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
Footer:
PORTAL.wwv_headings.show_footer(
p_template => 'PUBLIC.TEMPLATE_3',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
where
<PORTAL_DEMO> indicates application schema
<PORTAL> indicates the name of the portal (normally this will be portal30 by default).

Newly created index not being used

Hello friends,
I am observing that a newly created index on a z table with mandt & a new field is not being used. I have already rebuild index & updated stats for table.
when we query on this table with where clause having same 2 fields mandt & other.. we expected this index to be used. This table is very large. What more i can do now ?
In trace/SQL session, we can see it is going full table scan.. and takes very long time.
this new field contain no data as of now for all existing rows. Is this the reason ? or sometihng else ?
SQL Statement
SELECT
FROM
"ABSA"
WHERE
"MANDT" = :A0 AND "ZABCD" = :A1
Execution Plan
Explain from v$sql_plan not possible -> Explain from PLAN_TABLE is displayed !
No values in v$sql_plan for Address: 0000000166710240 Hash_value: 3891403872 Child_number: 0 Sql_id:
SELECT STATEMENT ( Estimated Costs = 905.739 , Estimated #Rows = 110.190.667 )
        1 TABLE ACCESS FULL ZABSA
          ( Estim. Costs = 905.739 , Estim. #Rows = 110.190.667 )
          Estim. CPU-Costs = 152.614.535.266 Estim. IO-Costs = 899.784
          Filter Predicates
NONUNIQUE Index   ZABSA~Z01
Column Name                     #Distinct
MANDT                                          1
ZABCD                                         1
thanks & regards
ashish
Edited by: ashish vikas on Mar 3, 2012 9:05 PM

ashish vikas wrote:
> Execution Plan
> Explain from v$sql_plan not possible -> Explain from PLAN_TABLE is displayed !
> No values in v$sql_plan for Address: 0000000166710240 Hash_value: 3891403872 Child_number: 0 Sql_id:
>
> SELECT STATEMENT ( Estimated Costs = 905.739 , Estimated #Rows = 110.190.667 )
>
>         1 TABLE ACCESS FULL ZABSA
>           ( Estim. Costs = 905.739 , Estim. #Rows = 110.190.667 )
>           Estim. CPU-Costs = 152.614.535.266 Estim. IO-Costs = 899.784
>           Filter Predicates
>
> NONUNIQUE Index   ZABSA~Z01
> Column Name                     #Distinct
> MANDT                                          1
> ZABCD                                         1
Hi,
with this WHERE clause, both columns just one distinct value, the Full Table Scan is indded the best approach, beside
the point you only need a check to evaluate a value is NOT in the result.
In this case you should HINT the statement to the new index, because the DB will always assume that this index is non-selective.
Volker

Linguistic index not being used

I am using 10G database and am having an issue that my linguistic index is not being used during sorting.
Any help will be appreciated.
Table structure.
create table TEST
ID CHAR(256) not null,
NAME VARCHAR2(100) not null,
DESIGNATION VARCHAR2(200)
alter table TEST add constraint ID primary key (ID)
create index TEST_IDX on TEST (NLSSORT(NAME,'nls_sort=''GENERIC_M'''))
Number of rows - 1 million
Query being run.
alter session set nls_sort='Generic_M';
select * from test order by name;
Explain plan
PLAN_TABLE_OUTPUT
| 0 | SELECT STATEMENT | | 1001K| 270M| | 70194 (1)| 00:14:0
3 |
| 1 | SORT ORDER BY | | 1001K| 270M| 579M| 70194 (1)| 00:14:0
3 |
| 2 | TABLE ACCESS FULL| TEST | 1001K| 270M| | 9163 (1)| 00:01:5
0 |
--------------------------------------------------------------------------------

I don't think that's true, at least with the nls_sort function. I'm running into the same problem now, and I've traced with and without the use of the index, and it's definitely better with the index.
Here it is, not using the index:
SQL> select * from test where col2='sfs';
no rows selected
Execution Plan
Plan hash value: 1357081020
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 366 | 2 (0)| 00:00:01 |
|* 1 | TABLE ACCESS FULL| TEST | 1 | 366 | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(NLSSORT("COL2",'nls_sort=''BINARY_CI''')=HEXTORAW('7366730
0') )
Note
- dynamic sampling used for this statement
Statistics
87 recursive calls
0 db block gets
21 consistent gets
0 physical reads
0 redo size
339 bytes sent via SQL*Net to client
327 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processed
And here it is WITH the index:
SQL> select /*+ index_asc(test index1) */ * from test where col2='adsfas';
no rows selected
Execution Plan
Plan hash value: 2960817241
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time
|
| 0 | SELECT STATEMENT | | 1 | 366 | 2 (0)| 00:0
0:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| TEST | 1 | 366 | 2 (0)| 00:0
0:01 |
|* 2 | INDEX FULL SCAN | INDEX1 | 1 | | 1 (0)| 00:0
0:01 |
Predicate Information (identified by operation id):
2 - access(NLSSORT("COL2",'nls_sort=''BINARY_CI''')=HEXTORAW('6164736661730
0') )
filter(NLSSORT("COL2",'nls_sort=''BINARY_CI''')=HEXTORAW('6164736661730
0') )
Note
- dynamic sampling used for this statement
Statistics
11 recursive calls
0 db block gets
7 consistent gets
0 physical reads
0 redo size
339 bytes sent via SQL*Net to client
327 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processed
Oddly enough, the optimizer chooses not to use the index on this example table I created.

An index can not being used and still afect a query performance?

Hi i have a query with a high cost so i created two indexes, A and B, to improve its performance.
After the creation of the indexes when i reviewed the execution plan of the query the cost had been reduced, but i noticed that the index B is not being used,
and if i try to force the query to use index B with a HINT the cost increases, so i decided to drop the index B.
Once i droped the index B i checked the execution plan again and then i noticed that the cost of the query increased, if i recreate the index B the explain plan
shows a lower cost even though its not being used by the execution plan.
Does anyone know why is this happening?
An index can, not being used by the execution plan and still affect a query performance?

user11173393 wrote:
Hi i have a query with a high cost so i created two indexes, A and B, to improve its performance.
After the creation of the indexes when i reviewed the execution plan of the query the cost had been reduced, but i noticed that the index B is not being used,
and if i try to force the query to use index B with a HINT the cost increases, so i decided to drop the index B.
Once i droped the index B i checked the execution plan again and then i noticed that the cost of the query increased, if i recreate the index B the explain plan
shows a lower cost even though its not being used by the execution plan.
Does anyone know why is this happening?
An index can, not being used by the execution plan and still affect a query performance?You said that is what is happening, & I believe you.

Period is closed for posting or correct document type is not being used

Hi All,
I am trying to post transaction in AB01. But i am getting below error.
I have checked OB52 and the periods for "+" & "A" are open for 2012.
Error:
Period is closed for posting or correct document type is not being used.
Please assist

document type i am using is AA.check it other side entery documenttype period open or not

Error during transformation : Source parameter is not being used

Hi,
I am trying to map two fields from datasource into one field in DSO i.e
Assigned Plant and storage location to Plant_storage infoObject.
but I am unable as I am getting the error below.
Rule (target: ZOBJ): Source parameter 0140 is not being used
Message no. RSTRAN502
Procedure for System Administration
Internal rule ID 68
I have checked online and seen related SAP notes but they are meant for BW 7.0. My system is BW 7.3
how can I resolve this issue.
thanks
Bhat

Hi Bhat,
When you are using two source fields are you doing the result calculation through routine or formula?
Just check if you are using any of these thing then both the source fields are getting used in the routine code.
Regards,
Durgesh.

Check if function is not being used

Similar Messages

Maybe you are looking for