"Check if the generated programs of an ODS object are up to date"

Hallo Experts,
we just made a system copy. After the system copy we recognize with the
TA: rsrv: "Check if the generated programs of an ODS object are up to date"
that the generated programs of ODS are not up to date.
Can the reason be the system copy? We don´t really know the reason.
Thank you very much.
Santra

Hi Santra,
isn't there a repair button to fix it? I can only imagine to do it manually with checking the last change date of a ods and the last change date of the update program.
regards
Siggi

Similar Messages

  • The extraction program does not support object 0MATERIAL

    Hi All,
    can you please help me with the issue that we have for some of our Master data load.
    Full Loads are working fine, Delta Init is working fine as well. but Delta load is not the error is "The extraction program does not support object 0MATERIAL"
    already tried looking for some OSS note but none of them helps.
    hope anyone can help me.
    Thanks in advance,
    Alden

    Hi Christopher,
    Below is the reply that I got from SAP Consultant:
    I assume that this issue was happened after upgrade
    which is already mentioned in the consulting notes 1165059 & 1251433:
    -> 1165059 ALE: Generating and reading change pointers after Upgrade
    -> 1251433 SAPI: Creating and reading change pointers after Upgrade
    Can you have a look at these consulting notes to get more information
    in details about ALE changing and follow my recommended steps to solve
    this problem please:
    1. Can you check this affected datasource in table ROOSGEN in source
    system and you will find the generated Message Type in MSGTYP:
    ->Tx. se16 ROOSGEN:
    OLTPSOURCE SLOGSYS RLOGSYS MSGTYP ->???
    2. Then you can check this Message Type (RS*) in table TBDA2 and you
    will see that the flag (BDCP2_ACT) is missing here in table TBDA2 :
    ->Tx. se16 ->TBDA2:
    MESTYP ACTIVE BDCP2_ACT
    RS* X (empty!)
    3. If the flage (BDCP2_ACT) is missing here in table TBDA2:
    Then you have to do the following steps:
    ->start transaction SALE:
    Modelling and Implementing Business Processes
    Master Data Distribution
    Replication of Modified Data
    Activate Change Pointers for Message Type
    -> select the affected generated Message Type
    -> RS* ->deavivate and activate again
    Afterwards the missing flag should be set correct in TBDA2 again.
    Please check it first and then you can start the delta upload in
    your BW system side again. The data load should work correct now.
    After carrying out the above steps we were able to re initialize the master data.
    Regards and Thanks,
    Vivek

  • The extraction program does not support object 0MAT_PLANT

    Pessoal alguém já passou por este problema?
    Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
    Já fiz um novo Init, mas o erro continua.
    The extraction program does not support object 0MAT_PLANT
    Message no. R3009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
    System Response
    The data extraction is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.

    Hi Eduard ,
    You can try the following steps to solve that
    1. Delete the previous Delta Init for the InfoObject
    If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
    Goto RSA7 ->Select and Delete the Init Request for the InfoObject
    From BW Side
    InfoPackage-> Inti for Source System -> Select & Delete
    the Init Request
    2. Execute the Init InfoPackage for the InfoPackage again.
    3. After successful completion, execute the delta InfoPackage.
    Hope it solves your problem, if not pls let me know.
    Thanks & Regards,
    Chandran Ganesan
    SAP Business Intelligence

  • The extraction program does not support object 0JOB_ATTR

    HI all,
    I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
    The extraction program does not support object 0JOB_ATTR
    Message no. R3009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
    System Response
    The data extraction is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
    I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
    Thank you.
    G.

    0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
    Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
    I have sent a message to SAP asking for the solution . Below is the reply what they gave.
    "This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
    Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
    If no data is being extracted please do the following:
    If you have data in HRP5050 and still do not get any data please try the following :
    1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
    2) Replicate the Data Source to BW
    3) Activate the Info Source again.
    4) Delete any previous delta initializations for the datasource.
    5) Initialize the delta again
    6) Try to load data".

  • The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1

    Hai friends,
    I am pulling data from Oracle database to BW through UDConnect. When I check in RSA3 for the datasource 6BEREC_REP_CH_PERFORMANCE1, I get the following error:
    "The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1"
    What does it mean? Kindly help.
    Regards,
    Neha Solanki

    Hi,
    It's not Absolute version. It's obsolete version(means No more)
    This will help you:----
    The extraction program does not support object 0JOB_ATTR
    Regards,
    Suman

  • The extraction program does not support object ZTD_AW_17

    Hi friends,
    When doing extraction I am getting the below error.Please
    see the below extract of system response.
    "The extraction program does not support object ZTD_AW_17
    Message no. R3 009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZTD_AW_17.
    System Response
    The data extraction is terminated."
    Please help me out.
    thanks
    Venkat

    Hi Venkat,
    Have you checked to see if the ZTD_AW_17 infoobject is in your system and active?  If not, transport the object from your D system to the P system.  Also check the infosource to see if it is active and if the ZTD_AW_17 infoobject is there.  If so reactivate the transfer rules and run the extraction again.
    Aaron

  • The extraction program does not support object

    I was loading data from R/3 to BW through a Generic Data source.  Previously it was loaded successfully but when I loaded last time, there was an error
    "The extraction program does not support object <Data Source Name>"
    Can somebody help me out please?

    Hi,
    Please check this.
    Loading Problem
    Regards.

  • Master data check not working when loading into and ODS object

    Hi guys,
    we are loading transactional data into an ODS from a flat file.
    In the infopackage, we have checked the option :                                                
    "Do not update data if no master data exists for a characteristic".
    This option seems to be unreliable :
    For some characteristics (it seems those loaded using transfer rules (routines)), incorrect data is still loaded into the ODS even if no entry exist in the associated infoobject master data table.
    Any help appreciated.
    Many thanks !
    Pierre-Yves

    Hi Dear,
       please delete all the incorrect master data from the master data characteristic first and then try to uploading the data again .It should work, because there migth be some master data created when data were loaded with out the check before.
    And please check whether all your characteristic info object are of master data , I mean that in the infoobject defination you have checked the master data check box on the info object. If you have only text then it might fail the master data check.
    hope this help.
    cheers,
    balaji
    Message was edited by: Balaji NS

  • Where can i check in the real time monitoring tool if there are active calls in progress?

    where can i check in the real time monitoring tool if there are active calls in progress? 

    Hi
    Selecting Call Manager -->Call Process ---> call activity
    HTH
    Regards
    Carlo

  • HT1688 my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

    my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

    If you're not a registered developer, it means you've stolen Apple's software.  Now you come to an Apple forum and ask for help?  You're lucky you're not being prosecuted!
    You can receive no help for stolen software here.  Enjoy your iBrick.

  • Automatically "Code Check" and "Compile/Generate" program or function

    Hello Experts;
    We will do upgrade to ECC 6.0 at near time.
    Our basis team will give us sendbox systems.
    And then We will enter the all z or y programs and check "Unicode Checks active".
    I want to do automatically "Code Check" and "Compile/Generate" with program.
    But I don't know "which use function or program"
    Please help me this point.
    Thanks.
    Best regards.

    HIi,
    Try Tcode : SGEN
    or
    try this link
    mass compile customer programs
    Regards
    Rajashiva.R

  • Need urgent help! How to check if the generated number is a whole number

    Hi,
    I have a simple issue but I need some assistance. I am
    calculating a number and the result number sometimes a whole number
    but in some cases decimals are present. Decimals do not need change
    but whole numbers need to change. So for example if the end result
    is "6" I need it to show it as "6.0" in a field beacuse that is the
    way the calculator should display it according to request.
    How can I check that the result number is a whole number and
    then add ".0" to it?
    I just included a simple script below.
    if (outputnumber == ?) {
    resultNum = Number(String(outputnumber+".0"));
    } else {
    resultNum = outputnumber;
    Thanks,
    Attila

    Hi reinhat,
    That means that "outputnumber" wasn't something that can be
    converted to
    a number. When you trace this value, what do you see?
    Regards,
    Patrick Bay
    BAY NEW MEDIA
    "reinhat" <[email protected]> wrote in
    message
    news:fndgeh$484$[email protected]..
    > The above mentioned example returns "NaN".
    > How can it return numeric value?

  • Where will store the lsmw program means whether local object or package?

    need a solution for where will store lsmw program..
    how to see itt.

    it is stored in $tmp
    in LSMW click the personal menu button and set a check mark to display program.
    so you get new entry in your LSMW menu.
    now you can display the program, on top you can see the program name like : /1CADMC/SAP_LSMW_CONV_00000082
    copy this program name and execute transaction SE38
    enter the program name
    set the radio button to Attributes and click display.

  • How do I get rid of the annoying yellow banner saying "some plugins are out of date on this page."

    Since 5/22/12 I have an annoying yellow banner in Firefox (and other web pages) stating that "some plugins are out of date on this page.") How do I get rid of this? I've checked my plugins and I'm fine for my Mac OS (10.4.1).

    Sounds similar to this thread from yesterday: [https://support.mozilla.org/en-US/questions/927963 How do I stop getting the prompt to update plugins? | Firefox Support Forum | Firefox Help]. Do any of the suggestions there help?

  • Iphone 4, App store showing 2 updates, but when I go into the app store it says all apps are up to date.

    I have an Iphone 4, IOS version 6.1.3. 
    My app store badge is showing 2 updates, but when I go into my app store, it tells me all apps are up to date.   I've tried several of the fixes that others have who have had simular issues,  but so far, I havn't seen anyone who is having the issue of the app store saying the apps are up to date. (Most others are unable to load the app store or its just blank.)
    Sometimes when I go into the app store the notification will go away,  but its only temporary as it will come back again later.   I've gone through my purchased list,  and there are none that have update beside them.  There are some that have a cloud,  but all of those are ones I have deleted and do not wan
    Unlike most users, I do not have a ton of apps.  Probably less then 30, some of those are ones it came with.  If this was a computer, I would think that there is something in the registry that is left over from one of the apps I deleted and its triggering the app store.  IDK if it works like that on Iphones as I'm not really an expect. This is the only apple device I've ever owned and I got it used from a friend about 6 months ago. (It was cleared and restored before I bought it from her)
    Everthing else seems to be working fine for the most part, except that it has been acting kinda slow and sometimes the browser and stuff doesn't load right the first try. (I only use wifi on it, as I don't use a cellular service with this Iphone)

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

Maybe you are looking for

  • Error message on New Computer

    Does a new computer affect the ability to download books to Nook from Adobe Digital Editions.  I get an error message on the new computer of C E Copy not allowed.  No permission to copy this book.  I did not have a problem on the old computer

  • MIGO/GR w/ PO and Validity Period Specific Pricing

    We have a business requirement to maintain validity period specific pricing on our outline agreements (Scheduling Agreements/Contracts).  The question is can receiving be controlled to pick the correct price based on delivery date and not when the go

  • Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

    Good morning everyone, I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM clien

  • Full Screen + Html + Flash Issues

    Hello, I have an Air app that will be running in Full screen interactive mode. Inside this app, I have an html control that is setup to view a page of mine that contains a flash file. The flash file is setup to fill the page and runs great in ie and

  • Progress bar for unmarshalling?

    Hi all, Can anyone give me an idea on how to track unmarshalling with progress bar. Here is a situation: I'm unmarsalling XML file to get my working object(s). Object obj = unmarshaller.unmarshal(file)Anyway, for big files I would like to present a u