Check in Later option in edit locally

Hi,
We are in EP NW04s SP10.
When i tried to Edit locally the documents in the KM repository , I am not getting the Check in Later option. I can see only Check In and Cancel Check out button.
And in the Recent Notification iview , I am not getting the Checked out Documents link.
I referred to the thread https://www.sdn.sap.com/irj/sdn/thread?messageID=872640.
But the property service is running in the Repository Manager.
Can anyone help to get the check in later option and the link in Recent notification iview.
Thanks & Regards,
Siva

Hi Siva,
Please double-check the prerequisites at http://help.sap.com/saphelp_nw04s/helpdata/en/3b/cbf52dde472343a5b8941dd43cc479/frameset.htm - for example, that you are not in "Personal Documents". Also keep in mind that you might need to restart the server if you have switched on the application properties service at runtime.
If all this doesn't help, open an OSS message.
Hope it helps
Detlev

Similar Messages

Improper message in iview when "Check in Now " fails in edit locally

Hi
We have implemented our own repository manager. I am facing a problem while Checking in a document after edit locally.
Usually edit locally undergo followings set of activities.
1.     Get the content of file using Content manager implementation and open that using appropriate application.(say a txt file in note pad)
2.     Then user can edit the file and save it.(it goes to temp directory)
3.     Three buttons appear in the iview (Check in now ,Check in later,Cancel editing)
4.     If user choose Check in now option .It should save the file in backend, which involves following steps
i.     Lock the resource
ii.     Set content and Save
iii.     Unlock
If any one of this 3 step fails while Check in Now it should display an appropriate message in iview stating the reason of failure.
So when a user without having Lock permission tries to perform a Check in Now, the first step fails (i).and it throws a exception which is wrapped as a ResourceException. In fact the same error message is getting written to the log4j files and it doesnt proceed with any backend operation.
But I am getting a message File "dmadmindoc.txt" has been checked in.
Where as file has not been checked in .Means application logic works fine, but error message wrapped doesnt get reflected to end user.
Can any body suggest overriding this message?
Regards
Arati

Hi Siva,
Please double-check the prerequisites at http://help.sap.com/saphelp_nw04s/helpdata/en/3b/cbf52dde472343a5b8941dd43cc479/frameset.htm - for example, that you are not in "Personal Documents". Also keep in mind that you might need to restart the server if you have switched on the application properties service at runtime.
If all this doesn't help, open an OSS message.
Hope it helps
Detlev

[Desktop] Restore Option to Edit Local File Information

Spotify has taken away users' ability to easily edit information on any local files (right click local file - edit info), such as adding an artist, album, or editing the title (yes, this comes in useful).
I've added a screenshot of 2 local songs: the top one had information edited before the update, while the bottom one was just added and I can't add any missing information or change the bizarre title, thanks to Spotify's new update.
Not only is editing information useful for clarity, but it is also key for linking local tracks to Spotify's catalogue.
If this is affecting you or my unsightly song title bothers you, please give this post kudos! Every little bit helps. Thank you!

by Meredith Monday - last edited Monday Options Status changed to: Not right now
Hey everyone, thanks for you continued feedback around the latest Desktop update. We are marking this ideas as 'Not Right Now' since your local files in the Desktop app should just mirror whatever is on your HDD. If you change/ delete something on your HDD it will be mirrored in Spotify. You can of course continue to leave comments and kudos here, thanks!
--------> REALLY? Not right now? Here's another prime example of Spotify not giving a darn about their customers. This IDEA page is about things we absolutely NEED and hate about the new update you released (which, lets face it, is a fail in almost all ways). Then you as a Spotify employee come on here and tell us that its not what we need or want, and tell us what this feature should in fact do. Well then, who needs customer satisfaction, right?

IISproxy problem: Edit locally - check in

Hi all EP freaks,
I have with succes implemented th IISproxy filter so I now can access the portal through the IIS(version 5.0).
I have som excel files that are being edited with the "Edit locally" function. This works fine (excel opens up and I can edit the data locally) but when I afterworth will "Check In" the modified documents the system "hangs". On the client the normal "copy file windows window" showing "Copyied 140% and still not finished... This wil go on for ever so I click cancel and the modified excelfile is'nt updated through the portal.
THIS WORK FINE BEFORE I IMPLEMENTED THE IISproxy module...
In the IISproxy log file i have:
18:02:47   4400 Proxy    | POST http://server01.domain.local:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fTEST!2fManager!2fTESTMAPPE!2fDocuments!2fcom.sap.km.AdminExplorer_2/dok | HTTP/1.1 200 OK | 0.000 | 0.078
18:02:48   4400 Proxy    | GET http://server01.domain.local:50100/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/docservice/docservice.cab | HTTP/1.1 304 Not Modified | 0.000 | 0.046
18:02:49   4400 SAP    E NiRawOutStream::RawWrite(): NiRawWrite( NI-1 ) failed: -6 (NIECONN_BROKEN)
18:02:49   4400 Proxy E ProxyImpl::ProcessBody(): IOException: NiRawOutStream::RawWrite(): NiRawWrite( NI-1 ) failed: -6 (NIECONN_BROKEN)
     at SapConnection.cpp:331
18:02:49   4400 Proxy E Failed to send request body.
Please help me
Best regards
Lars Bregnedal

Please try also the following settings:
use-continue=false
keep-alive=false
close-socket=true
These were reported by SAP support as the recommended settings for customer having problems with Local Editing and IIS Proxy.
ActiveX is for Windows only, Java Applet can be used also on other platforms. To use the Java Applet uncheck ActiveX, select "Java Applet" and set the version to "1.3" even if running 1.4 (again a recommendation from SAP support).
If it still doesn't work, you should check that your Java Plug-In actually works. Here is a link I always use to check that the Java Plug-In works:
http://www.java.com/en/download/help/testvm.jsp

Option to edit PDF document on UCM without checkout or check-in new rev

We have a request to allow user to edit the PDF document on the UCM site itself to save steps like check-out or download native file and upload it after modification.
We want to integrate Oracle R12 invoicing module with UCM. Presently Oracle generates Client invoice and emails it to finance team. The Finance team makes modification to few invoices (PDF document) and email it to different team for approval. The problem is finance team don't have to explicitly download the PDF because it is already in the mail box and explicitly not required to upload it. If we provide the option to edit the PDF on the UCM itself then the steps like check-out and check-in can be avoided.
Thanks in advance.

I'd recommend you to go with AutoVue, or other context annotation techniques (OnTrack, now Oracle Social Network supports this feature as well).
Like this, PDF is not modified, but rather context annotations are created. This is also a better design - in a document is being approved, you know what is the original, and what is a comment (annotation).

Edit Locally - Temporary file not removed after check in

Hello,
I am editing a Word document Abc.doc with Edit Locally (using ActiveX). After having done editing the document, I save the document and close MS Word. Then I check in the document by clicking on the button "Check In Now" in the portal screen. The document is checked in KM. At this point, the temporary file should have been removed automatically. However, the temporary file in my local drive under the folder Temp/docservice still remains and the file is now renamed to Abc.doc_send (instead of Abc.doc).
Does anyone know why the temporary file remain ? Is there any configuration need to be done so that the temporary file is automatically removed once the editing is done and check in.
We are using Portal 6.0 SP 16.
Many thanks in advance.

(1) If you have a local server, did you try to build locally, deploy locally and test.
(2) After checking-in your changes, did you activate, transport?
(3) Did the Basis team deploy the changed components to the target server (development server in your case)? If you want auto-deploy, you can set so in the NWDI Transport Studio settings.

SP2013 and Project 2013 - project files open in read-only mode with no options to edit only Save As

Hi all,
Environment:
SharePoint 2013 (15.0.4420.1017) RTM
Windows 8 - Project 2013 (15.0.4433.1506) 32Bit
Issue details:
When opening .mpp files stored within SharePoint they are opened successfully within Project 2013 however they are opened in Read-Only mode with no options to edit/check out only Save As. The
same outcome is experienced if you click the document link within SharePoint or you chose to edit from the document menu.
Opening the file through windows explorer also opens only in read-only mode.
To date we’ve tested the following
Windows 7 – Office 2010 = working as expected
Windows 8 – Office 2010 = working as expected
Windows 7 – Office 2013 = opening as read only, no prompt to edit
Windows 8 – Office 2013 – opening as read only, no prompt to edit
Current thinking is that it is an issue with either the SharePoint Office Documents Class ActiveX control or Project 2013 itself interacting with SharePoint 2013.
We have tested this in multiple SP2013 environments with the same outcomes.
The workaround therefore is to save locally and then upload again which is not ideal.
Unable to find an exact issue match to this.
Any help with this appreciated.

Hi Dan,
For us after investigating this further it was found that using the document menu to edit or checkout and then edit results in the project file being opened in read-only mode.
The same issue was present for Visio files.
Using the FILES ribbon menu results in the document being opened in edit mode successfully in both Project and Visio.
Please note that we found that this issue only exists within document libraries where checkout is required to edit which was our case. If checkout is not required the document
menu can also be used as expected.
Cheers,
Dan

Problem in Edit Locally

Hi,
I can't able to work with "Edit Locally" in my text file in the Public document.
Can any body tell me,If i want to do any setting or adding any role ?...for enabling the "Edit Locally" option in my public document.
Regards,
Ravi.

Hi Ravi,
You need to configure edit locally in the KM Configuration either to run as Java Applet or ActiveX:
http://help.sap.com/saphelp_nw04s/helpdata/en/a6/181b09bcc7fe4389c8c17d2ad849cc/frameset.htm
Also, as mentioned there "Regardless of whether you are using ActiveX or the Applet, you have to make ActiveX settings in the browser (Internet Explorer) in order to use the Edit Locally function."
You might also want to check all prerequisites mentioned here:
http://help.sap.com/saphelp_nw04s/helpdata/en/3b/cbf52dde472343a5b8941dd43cc479/frameset.htm
Hope this helps,
Robert

Edit locally throws NullPointerException

Hi All,
While doing EditLocally in a Custom Repository Manager,it throws a null pointer Exception.
As per the Repository Manager Implementation
log ,we dont any exception. So as there is no such relevent error realted to repository manager in default.trc file.
RF doesnt pass call to setContent() method of ContentManager.
We failed to do so in Nw04 SPS11 and Nw04 SPS14.
Where as we can able to edit successfully in NW04 SPS09.
Regards
Arati
Following is the stack trace we got in iview of edit locally
Please wait
Your request is being processed
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class
Call Stack java.lang.NullPointerException
        at com.sapportals.wcm.control.edit.ResourceClientSideEditControl.renderLockedByUser(ResourceClientSideEditControl.java:1029)
        at com.sapportals.wcm.control.edit.ResourceClientSideEditControl.renderIsLockedByOther(ResourceClientSideEditControl.java:344)
        at com.sapportals.wcm.control.edit.ResourceClientSideEditControl.renderCurrentConditions(ResourceClientSideEditControl.java:302)
        at com.sapportals.wcm.control.edit.ResourceClientSideEditControl.render(ResourceClientSideEditControl.java:191)
        at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
        at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
        at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
        at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
        at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
        at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
        at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
        at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
        at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
        at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
        at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
        at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
        at com.sapportals.wdf.WdfCompositeController.internalRender(WdfCompositeController.java:696)
        at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:664)
        at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
        at com.sapportals.htmlb.Container.preRender(Container.java:118)
        at com.sapportals.htmlb.Container.preRender(Container.java:118)
        at com.sapportals.htmlb.Container.preRender(Container.java:118)
        at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:413)
        at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:237)
        at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:130)
        at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
        at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
        at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:73)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.doRefresh(AbstractPortalComponent.java:355)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:188)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
        at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
        at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
        at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
        at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
        at com.sapportals.portal.pb.IviewModeProxy.doContent(IviewModeProxy.java:20)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
        at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
        at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
        at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
        at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
        at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
        at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
        at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
        at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
        at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
        at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
        at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
Report Error

Some more behavior of this problem
1)when try to edit locally>file download started and open the file in approprite application>and in the KM iview got the null pointer exception(which usually have check in now, check in later, cancel local editing buttons)
2) When resume local editing...nothing happens. Even doesnt through error in iview
3) when do a lock explicitly to any document- through selection->lock,it puts a check_out_by_me symbol rather than lock_by_me symbol
Please any body help to resolve the issue,
Regards
arati

Local admin rights when Edit locally

Hello, all!
We have the same problem as in
Local Admin rights to "Edit Locally" ?
"The end users do not have administrator rights on their local PCs , they logon to the domain server with restricted rights. When it comes to portal, when trying to edit a document with "Edit locally" it is not possible to do is even if the user has all the rights for the document in the Portal KM configuration. When we make the user local admin, everything is OK"
We are on SPS14, Windows XP SP2. Domain users can run corresponding applications and can create dirs or files in a temp directory. We also utilize env. variable SAPKM_USER_TEMP but with no success.
Could yoã please suggest, how to find rights needed to execute Local Edit. Are there any way to trace this Docservice ActiveX?

Hello Roman,
here a note which describes a solution for a user account wuth restricted rights:
The Edit Locally activex will be installed based on following
installation steps:
The browser will recognize that the KM DocService activex has to be
started.
In case of the activex isn't installed on the the PC, it will be
downloaded from the KM server (...etc/docservice/docservice.cab)
The browser will extract two DLLs from the docservice.cab file
(docservice.dll and sapkmprogressplayer.dll) and register them on the
local PC. To see if the installation succeed you can open within the
browser following dialog: Tools/Internet Options/Settings/View Objects,
look for program file SAP KM DocService Control.
Registry keys in following areas will be created:
Area HKEY_CLASSES_ROOT:
HKCR\AppID\{5F8983A6-347C-46B9-BA7A-1B87E5DAE0BC}
HKCR\ProgressPlayerMod.ProgressPlayer
HKCR\ProgressPlayerMod.ProgressPlayer.1
HKCR\CLSID
HKCR\TypeLib
Area HKEY_LOCAL_MACHINE:
HKLM\Software\Microsoft\Windows\CurrentVersion\ModuleUsage\C:/WINNT/Down
Downloaded Program Files/DocService.dll
HKLM\Software\Microsoft\Code Store Database\Distribution Units\
When finishing these steps successfully the installed version can be
located within the browser dialog Tools/Internet Options/Settings/View
Objects SAP KM DocService Control and den KM DocService will
start loading the document content from the KM server and starting the
corresponding application for editing.
Installation with restricted user accounts:
With restricted user accounts e.g. no access rights to create registry keys in the area of HKCR or HKLM etc., which lets the described installation fail, following installation procedure leads to success:
Register the needed DLLs manually on the PC (e.g. via a shell command script) with a user account having enough access rights.
1.1 Create an installation folder (don't use /windows/system32) on the PC and copy the DLLs (docservice.dll and sapkmprogressplayer.dll) to it (extract them from docservice.cab with a tool e.g. winzip).
1.2 Open a command shell on this installation folder.
1.3 Unregister possible existing versions with the following command:
"regsvr32 docservice.dll /U " and "regsvr32 sapkmprogressplayer.dll /U "
1.4 Register the both DLLs with: "regsvr32 docservice.dll" and "regsvr32 sapkmprogressplayer.dll "
1.5 If the two registration steps fail check the permissions to write
into the system registry.
1.6 The installation folder do not need special permissions, the linkage to the DLLs will be done via the system registry.
1.7 Additionally the following setting is mandatory to succeed the installation:
Disable the "ActiveX Version Check" function within the KM Configuration
SystemAdministration->SystemConfig->KnowledgeManagement->
->Configuration->ContentManagement->Utilities->Editing->LocalEditing-> ActiveX Version Check (Uncheck the checkbox)
Setting a different TEMP directory:
In cases that it is problematic to use the standard %TEMP% directory, setting the environment variable SAPKM_USER_TEMP pinpointing to a corresponding directory path (e.g. X:\SHARES\USERS\xxx\CheckedOutDocuments) will be also supported. If the access to that directory fails the standard %TEMP% directory will be used as fallback.
Hope this helps,
Michael
Message was edited by: Michael Braun

Edit Locally Error in download of document

Hi All,
I am facing an error in the Edit Locally option of the KM. The document is getting downloaed,saved and opened when accessed by clicking over it.But when trying to edit locally it gives an error saying:"The download of the document failed"
I have not faced this error before and now dis is faced by all the users of the portal.
Please suggest what could be the possible reason and more importantly solution :)....

Hi,
Yes acivex control is properly installed on the local machines.
Also checked the URL genertaor service and it has the hosname of the server.
Edit locally was working fine till a week back.
At that time a porblem occured regarding the tablespace of KM, and at that time the tablespace
was increased. After that, the Edit Locally started throwing the described error.

Error in editing locally a text file

Hello
i have created a text file in my KM Content
i can edit the text file by the option Edit Online
but my i try to edit it with the option Edit Locally
i get the following error
Loading...
If your application does not start, your local settings may be preventing you from editing locally.
Cancel Local Editing
useful answers will be rewarded
Regards
JM

it mentioning the following parameters
ActiveX Version Check
Active Component
Java Runtime Version
where do i check these parameters
as well as i have gone through the SAP Note 755581
it says
The browser will extract two DLLs from the docservice.cab file (docservice.dll and sapkmprogressplayer.dll) and register them on the local PC. To see if the installation succeed you can open within the browser following dialog: Tools/Internet Options/Settings/View Objects, look for program file SAP KM DocService Control.
but the browser did not extract the dll's
how will the browser extract the dll's and register on my pc
useful answers will be rewarded
Regards
JM

Java Script error with EDIT LOCALLY

HI All
We're on NW2004s, users run Windows XP with I.E 7.
Im trying to edit one document in my KM with the "Edit Locally" option. The moment I click on this option, it shows a Java Script error on the page and shows that the excel sheet is still opening (Loading....). It never opens.
The Java Script reads -> Object doesnt support this property or method.
Do I need to do any configurations ? Any clues ?
Regds,
Edited by: S.B on May 6, 2008 8:25 PM

I checked this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/24/ae5e77711b431c887aa5193af8d851/frameset.htm
and checked the folloing :
You can also verify the download as follows:
       1.      In the Web browser of the user, from the Tools menu, select Internet Options.
       2.      In the General tab, click the Settings button.
       3.      In the Settings window, click the View Objects button.
       4.      In the Download Program Files window, if any of the following appear in the Program Files list, then the ActiveX control was downloaded:
¡        ExpBaseNegotiator
¡        ExpApplSelect
¡        ExpApplShareX
The above files are not there in my Downloaded program files window. Which means my active x is not enabled.
Any idea where can I get these files ?

Editing locally

Hi Experts,
Iam having one issue regarding editing locally when iam clicking on the option iam getting the error like
cancel " operation failed"
please help me in this what needs to be done ...
Regards,
Shilpa.

Hi,
Can you try this.
Go to System Administration -> System Configuration -> Knowledge Management -> Content Management -> Global Services -> (switch to advanced mode) ->URL generator Service -> Host
Check what value you have there for Host Parameter.
you should haveyour Portal URL http://portal.company.com:<Port>/irj/portal.
Pls refer Note 1095284 for more info.
Regards
~Hussain.

Getting error while trying to edit locally the document in KM of portal.

Hi all
we have configured file server in km portal as fsdb mode in portal (ep 7 sp 14). We were able to edit locally the documents . But all of a sudden from some of the PCs we are getting the following error while trying to edit the documents.
The download of the document failed .
Is there any PC specific configuration required? For the same user we are able to edit the documents from some PCs but from another it is not working.
Thannking you.
Rajendra.

Hi,
You have to set your activex control properly. then only edit locally in KM will work.
Also check the below wiki
https://www.sdn.sap.com/irj/scn/wiki?path=/display/KMC/HowtotroubleshootproblemswithLocalEditing
Hope that helps
Raghu

Check in Later option in edit locally

Similar Messages

Maybe you are looking for