Check-in of required SC's in NW2004s

Hello,
please, can somebody help me ?
To change the ESS sources, i must check-in the required SC in the Track (CMS), in order to do the ".sca" files must be copied to folder "cms/inbox" . But where can i find the ".sca" files in NW 2004s? The Folder "CMS_CBS/plugins" doesn't exist anymore.
From where i know, what is the right name of the .sca file, e.g. for SAP_BUILDT ?

Hi
Go to https://websmp210.sap-ag.de/swdc/
and navigate to
Download -- "Support Packages and Patches" -- "SAP Application Components" SAP ERP" SAP ERP 2005" Entry by Component" SAP XSS (Self Services)
  Here you can download the .sca for SAPJEE, SAP__BUILDT, SAP_JTECHS, SAP_ESS 600 and SAP_PCUIGP.
Hope this helps
Cheers
Madhu

Similar Messages

  • I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its annoying.

    I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frustruating.

    Hi...
    Apple's policy states that, "all sales are final" >  iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    But since you are not getting any help from the developer, you can use the email form to contact Apple and ask for a refund >  Apple - Support - Mac App Store - Contact Support.
    No guarantees.

  • OneNote file cannot be synced because Check-in Check-Out or Required Properties are enabled in the SharePoint library

    Hi All,
    As per my requirement, I have a Document Library that's set to YES  for "Require documents to be checked out before they can be edited" and i have created a Document Set inside this Document Library.Document set is configured
    to create a OneNote document content type within it. When i am creating a OneNote document I am getting below mentioned Error while trying to sync.
    This section cannot be synced because Check-in Check-Out or Required Properties are enabled in the SharePoint library. Disable Check-In Check-Out and Required Properties or move this notebook to a different location. (Error code: 0xE000078E)
    Is there any settings that i can do without modifying Document Library Settings.
    I just try out the information given on below mentioned U, but No Luck.
    http://social.technet.microsoft.com/Forums/office/en-US/a0e8cb4e-6daa-4ef8-a856-337da837c5db/sync-error-to-sharepoint-2010-library-with-revisions-checkinout-not-enabled?forum=officeitproprevious
    Can anyone of you suggest me the best way to achieve this?
    Thanks in Advance!

    Have you looked specifically at the Title field?  That's a common offender.  It might also be worth activating Content Type management on your library, so you can inspect each of the fields in the content type that's being saved too
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Error during Checking Network Configurations Requirements in RHEL3 VM

    Hi,
    I have a Red Hat Enterprise Linux Image Virtual Machine on my desktop which uses Fedora Linux. I have set this up using VMplayer.
    I need to install Oracle 10g on the RHEL VM.
    As the RHEL VM does not have X Windows, I am connecting to it from the Fedora Linux to do the installation.
    During the Product-specific Prerequisite checks:
    Checking Network Configurations Requirements throws an error,
    Please find it below:
    Actual Result: Unknown Host Exception has Occured :rhel3vm:rhel3vm
    Check complete: The overall result of this check is: Not executed <<<<
    Recommendations: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle software to function properly.
    The Fedora Linux gets the IP address from the DHCP and allocates an IP address to the VM.
    However, when we set both of them as static and the problem still persists, and also when we set the fedora as dynamic and RHEL VM as static, the issue is not resolved.
    Any help will be truely appreciated. Thank you.

    We were running a non-DHCP (static IP) configuration and ran into this issue. We discovered that the hostname and FQDN were not correctly specified in the /etc/hosts file.
    Fixing the hosts file to correctly reference the IP resolved the issue.
    Hope this helps...
    -john

  • Project check in is required Not Working

    For all stages in my workflow the "<label for="ctl00_ctl00_PlaceHolderMain_PWA_PlaceHolderMain_idFormCheckinReqd_ctl02_CheckinRequired">Project check in is required</label>" check box is checked, but when users submit their
    project in PWA the Workflow kicks off approvals associated with the next stage even though the project is not checked in.  What is this check box supposed to be doing?

    I am having same issue, I have tried uninstalling and installing at about five times but still same result, what's going on with ISO6?

  • Checking Network Configuration requirements

    Hi
    I am getting the following error while installing oracle database 11gR1
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    ========================================================
    OS: SUSE 10 SP2
    My network is configured to static ip, and DHCP is disabled. I don't know what else can be the reason, please, give some pointers...
    regards
    RF

    oracle@bitmatrix:~> /sbin/ifconfig -a
    eth0 Link encap:Ethernet HWaddr 00:13:8F:B1:A4:0D
    inet addr:192.168.102.70 Bcast:192.168.102.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:102126 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1323 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:7368939 (7.0 Mb) TX bytes:83864 (81.8 Kb)
    Interrupt:177 Base address:0xcc00
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:84093 errors:0 dropped:0 overruns:0 frame:0
    TX packets:84093 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:22063435 (21.0 Mb) TX bytes:22063435 (21.0 Mb)

  • CHECKING NETWORK CONFIGURATION REQUIREMENTS  : WARNING

    Hello........
    when I want to install oracle 10.2.0.1 software, there is warning about CHECKING NETWORK CONFIGURATION REQUIREMENTS
    it is :
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
    Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    what can I do
    tank you very much to help
    ömer faruk akyüzlü
    in Turkey

    I suggest you to read this thread: Re: I can't access to my Enterprise Manager. Then you'll realize why it is important to define a fixed IP Address and not to entirely rely on a DHCP dynamically assigned IP Address. This thread shows you how to configure a Loopback adapter to solve this issue.
    ~ Madrid

  • How am I suppose to check my system requirements? Everytime I download the Photoshop CC, it says I do not have some requirements.

    How am I suppose to check my system requirements? Everytime I download the Photoshop CC, it says I do not have some requirements.

    See http://helpx.adobe.com/photoshop/system-requirements.html

  • Check networking configuration requirements

    hi all , i am trying to install oracle database 10g rel2 , and i came across this step :
    check networking configuration requirements
    with warning ,
    can i skip this warning or what ?
    thanks

    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
    Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    =======================================================================
    Validating ORACLE_BASE location (if set) ...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Oracle Home path for spaces...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Oracle Home path for location ...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for proper system clean-up....
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for Oracle Home incompatibilities ....
    Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Passed
    =======================================================================

  • Checking for Patch Requirements for Extended Support of 11.5.10

    Hello
    I am trying to check for a client that they are meeting the minimum requirements to remain on Extended Support. They use 11.5.10.2 and run that on a 11.2.0.3 db
    The method I am using is:
    1.
    Check to see what is Shared and Licensed via OAM.
    This will tell me the products that we must licensed and shared and which we must ensure we meet the minimum
    2.
    Go to Patch Requirements for Extended Support of Oracle E-Business Suite Release 11.5.10 [ID 883202.1]
    and ensure that we are meeting these.
    Seems very tedious ... (over 60 products to check) is there another way?
    DA

    Pl see if this MOS Doc can help
    How to Verify the Versions for the 11.5.10 Minimum Baseline Requirement (Note 883202.1) [ID 1271621.1]
    Pl also see
    https://blogs.oracle.com/stevenChan/entry/ebs_11i_patch_wizard_extended_support_baseline
    HTH
    Srini

  • Password button checked but not required to open screen saver or wake up

    I want my iMac to require a password to wake from sleep or restore the screen. The button for this option (Require password to wake this computer from sleep or screen saver) is checked under Security, but is not being used. I tried unclicking and reclicking the button, and I tried making sure iTunes is turned off, in case having a radio station playing prevents something from happening, but no luck. Any suggestions?
    David

    I have seen many threads about this over the years, and have even seen it on my own Mac (but it's working fine right now.) The long and the short of it is that I no longer trust that feature to work as advertised. Now I fast user switch to the login window before sleeping my Mac or leaving it unattended. The next person to use the Mac will need to enter the account password to get back in, so this really works just as well as what the screen saver password is supposed to do.
    I even wrote a little script to switch to the login window and then put my Mac to sleep when I press Command-F13. I can share how to do that with you if you like.

  • How can I make a "check mark" be required?

    I have an approval form where my customer needs to check that they have read something... I want it to be required before they can submit the form back to me. When I went to ceate my form, it would not let me check the required field... only on text? If this is not possible, how is another way I can do this?
    Would it be possible to make it a text field and only allow the letter X to be there? I am new to forms so not sure if there is a way to do this either.
    Thanks so much for all your help...
    Jayme
    I am using Acrobat 8 pro.

    Check-boxes can't be set as required because they always have a value, when
    ticked and when not.
    Using a text-box is a good idea. Otherwise you would have to submit the
    file using code, which would mean that you'd also need to validate the rest
    of the required fields using a script.
    Another option is to add a piece of text next (or onto) the Submit button,
    saying something like "By clicking this button you agree, etc...".

  • Checking video game requirements???

    Hello,
    I was about to buy THE FORCE UNLEASHED for MAC and I was checking the specs on the official site.
    Mac System Requirements
    " MAC RECOMMENDED
    CPU Speed: 2.6 GHz Intel Quad-Core
    Video Card: Geforce 8800
    Video Memory (VRam): 512 MB
    NOTICE: Intel integrated video chipsets are not supported.
    NOTICE: Apple Intel Chipsets only. Power PC Processors (G4 and G5) are not supported
    NOTICE: This game is not supported on volumes formatted as Mac OS Extended (Case Sensitive) "
    My processor is 2.16 GHZ Intel Core 2 Duo and my hard drive is Mac OS Extended (Journaled).
    Will I be able to play this on my computer?
    I was also interested in the game DRAGON AGE AND THE SECTION OF THE BioWare site on the MAC version says "This game will not run on PowerPC(G3/G4/G5)based Mac systems or Intel GMA class of video cards."
    What is "Intel GMA" and how can I tell if my system will work?
    Cheers

    Yes, it should run on your iMac - can't talk to game performance, however, since the recommended specs are faster than your system. You have an Apple Intel-based iMac, which has an ATI or Nvidia video circuit. The 'case sensitive' formatting has to do with how the system treats file names, and is different than 'journaled' which you have. Intel GMA video is the integrated video used on the mac mini. If you need to reference the specs for your system, they are at http://support.apple.com/kb/SP28

  • Making Check box a required field

    Hi Guys,
    I am currently creating a form to put on my website and it is
    working okay. However, I want a check box for people to tick
    confirming they have read the terms and conditions.
    I cannot work out how to make it so the form will not send
    without the box bring ticked.
    If i could get it set up so that when trying to submit the
    form without having the box ticked it would leave a message
    explaining the box needs to be ticked that would be good to!
    Can anyone help me please? Am at my wits end!!!

    On 19 Mar 2007 in macromedia.dreamweaver, jameshuk wrote:
    > I am currently creating a form to put on my website and
    it is
    > working okay. However, I want a check box for people to
    tick
    > confirming they have read the terms and conditions.
    >
    > I cannot work out how to make it so the form will not
    send without
    > the box bring ticked.
    >
    > If i could get it set up so that when trying to submit
    the form
    > without having the box ticked it would leave a message
    explaining
    > the box needs to be ticked that would be good to!
    The only way to do that client-side is with Javascript (which
    is not a
    bad measure for cutting down on spambots), but it's not
    reliable. The
    only way to do it reliably is serverside. PHP:
    <?php
    if ($_POST['checkbox'] == 'checked') {
    // Process form
    } else {
    // Send back to check checkbox
    ?>
    Joe Makowiec
    http://makowiec.net/
    Email:
    http://makowiec.net/email.php

  • Checking Network Configuration Requirements - Not Executed

    DBAs,
    My server runs on RHEL4. I have configured eth0 after installation of RHEL with a static IP and my server is not on network.
    While installing the oracle10g R2 network configuration check is not executed. if i check the box and continue, installation is done without any error. After the installation when the server is connect to a network oracle is not accessible from a client machine.
    PS: Listener is started and database is up.
    please replay asap
    kris

    HI,
    You have to configure NETWORK configuration./
    application >>>> server setting >>>> NETWORK <<enter>>
    edit DYNAMIC to STATIC ip address ( give STATIC IP ADDRESS).
    and restart NEWTORK services.
    or edit /etc/hosts file
    add ip address or computer nameregards
    Taj

Maybe you are looking for