Check-in problem

Hello guys! I have a nokia N8-00 and when i check-in it seems that it appears in private.I want it tot be public.I tried to find the settings but I didn't manage it.I would appreciate it if you could help me.Greetings from Romania.

Hi Chris,
When you start to check-in a model, PD places a lock on the model to make sure no other user will check-in the same model at the same time.
However, this does not explain why PD is crashing. In your instance further evaluation is needed to to determine which exception is happening and what SQL order is failing if any.
Please open a technical support incident so that we can assist you further.
Regards,
Anthony

Similar Messages

  • Use Performance Tool to check memory problem

    Hi, I am new to mac programming.
    How can I use the performance to check memory problem such as "uninitialized memory read", "memory access out of array boundary" etc?
    Thanks,
    fm

    Don't know about source code analyzer, but dbx, the Sun Studio debugger, is capable of detecting memory leaks at run time. You can use bcheck script on your application or start dbx, issue "check -leaks" and then run your app under dbx.

  • Check print Problem  - F110

    Hi,
    Automatic payment program run was carried out in the last week through F110. It was observed that 56 payment documents has been generated, but due to check lot problem, only 12 checks has been issued and the programe was terminated due to insufficinent checks.
    I would like to assign new check lot number for the above doucments for which checks not issued.
    Let me know what is the procedure 
    Thanks & Regards,
    Prasad

    Hi,
    Reprint Check (FCH7).
    Procedure
    1.       Start the transaction using the transaction code FCH7.  The Reprint Check screen appears.
    2.       As required, complete/review the following fields:
    ·         Paying company code
    ·         House bank
    ·         Account ID
    ·         Check Number
    ·         Void reason code
    ·         Check lot number
    ·         Alternative form
    ·         Padding Character
    ·         Printer for forms
    ·         Payment advice printer
    3.       Select the checkbox  to the left of Print Immediately.
    Assign points if you find this helpful.
    Zia

  • I have an Apple MacBook on which Lion 10.7, plus all updates, are successfully installed.  Can you tell me if TechTool Deluxe, normally supplied with Apple here has been now tested and found to run successfully?  I have run the program to check a problem

    I have an Apple MacBook on which Lion 10.7, plus all updates, are successfully installed.
    Can you tell me if TechTool Deluxe, normally supplied with Apple here has been now tested and found to run successfully?
    I have run the program to check a problem that I'm having. The particularly with video, and also volume structure. TEchTool Delux reports a failure for both of these components.
    I am wondering if this is realistic or not, given the start-up screen for TechTool Delux mentions on start-up that it has yet to be tested fully with Lion?
    With thanks, Ron.

    Yes, I understand, however, he Macbook is out of its Applecare, but the TechTool it still on the machine. Does that entitle me to an upgrade in TechTool?
    I suspect not, hoever, seeing I am running Lion, I am not sure at all? If you can answer this question it will help as then Imight be able to solve the problem I'm having.
    Best regards, Ron

  • Please check this problem

    please check this problem i am not getting my j2ee server deployed for a long time.
    when i try to execute my j2ee server ,i get the following problem
    C:\Documents and Settings\win>j2ee -verbose
    J2EE server listen port: 1050
    Naming service started:1050
    Exception in thread "main" java.lang.NoSuchMethodError
    at com.sun.corba.ee.internal.corba.AnyImpl.createTypeCodeForClass(AnyImp
    l.java:1256)
    at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.createTypeCode(Sh
    utdownUtilDelegate.java:223)
    at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.writeAny(Shutdown
    UtilDelegate.java:178)
    at javax.rmi.CORBA.Util.writeAny(Util.java:80)
    at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.re
    bind(Unknown Source)
    at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:188
    at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:202
    at javax.naming.InitialContext.rebind(InitialContext.java:370)
    at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
    erImpl.java:192)
    at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
    erImpl.java:149)
    at com.sun.enterprise.server.J2EEServer.bindObject(J2EEServer.java:718)
    at com.sun.enterprise.server.J2EEServer.createServerObject(J2EEServer.ja
    va:473)
    at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:244)
    at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
    may be path variables are not set properly plaese tell what is the problem.thank you.

    sounds to me like you have a stale corba stub or something, but i'm no corba expert and i thought it went extinct about 5 years ago

  • Check out problem with InCopy / Alfresco

    I use the following components:
    InCopy CS5 7.0.3
    Drive 2.1.0.204
    Alfresco 3.4.0 (d 3370)
    Before I can start editing the text in InCopy, a dialog comes up and I have to check out the content
    (Don't know the exact words of the dialog, because i only have a german version).
    But when I try to check out the content, nothing happens.
    The following error message appears in the log file 'CS5ServiceManager_java.log':
    2011/03/10 11:56:24,326 [ConnectionHandler-kernel] ERROR GetAssetsHandler - asset not found: /.Trashes
    2011/03/10 11:56:24,415 [ConnectionHandler-kernel] ERROR GetAssetsHandler - asset not found: /Testbereich/Ausgabe 03-09/om_dok Aufgaben/Text editieren.injb
    2011/03/10 11:56:49,669 [ConnectionHandler-kernel] ERROR GetAssetsHandler - asset not found: /.Trashes
    2011/03/10 11:56:49,731 [ConnectionHandler-kernel] ERROR GetAssetsHandler - asset not found: /Testbereich/Ausgabe 03-09/om_dok Aufgaben/Text editieren.injb
    2011/03/10 11:56:53,524 [JobHandler-3] ERROR CheckOut - Caught exception
    com.adobe.drive.data.model.DriveException: The assets are opened by point products.
    at com.adobe.drive.internal.data.manager.DataManager.checkOperationIsAllowed(DataManager.jav a:7941)
    at com.adobe.drive.internal.data.manager.DataManager.checkOperationIsAllowed(DataManager.jav a:7930)
    at com.adobe.drive.internal.data.manager.DataManager.checkOut(DataManager.java:3763)
    at com.adobe.drive.internal.biz.versioncue.service.call.CheckOut.executeItem(CheckOut.java:9 3)
    at com.adobe.drive.internal.biz.versioncue.service.call.CheckOut.executeItem(CheckOut.java:4 7)
    at com.adobe.drive.internal.biz.versioncue.service.call.VersionCueCall$1.run(VersionCueCall. java:125)
    at com.adobe.drive.internal.biz.versioncue.service.call.VersionCueCall$1.run(VersionCueCall. java:119)
    at com.adobe.drive.data.internal.persistence.PersistenceRunner.run(PersistenceRunner.java:11 9)
    at com.adobe.drive.internal.biz.versioncue.service.call.VersionCueCall.execute(VersionCueCal l.java:134)
    at com.adobe.drive.internal.biz.versioncue.service.VersionCueService.checkOut(VersionCueServ ice.java:347)
    at com.adobe.drive.ncomm.versioncue.CheckOut.handle(CheckOut.java:57)
    at com.adobe.drive.ncomm.versioncue.VersionCueRequestHandler$1.run(VersionCueRequestHandler. java:185)
    at com.adobe.drive.core.internal.jobs.JobHandler$JobWrapper.run(JobHandler.java:270)
    at com.adobe.drive.core.internal.jobs.JobHandler$JobWrapper.run(JobHandler.java:286)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:680) 
    So my questions are
    - what is a point product?
    - what causes this error?

    Hi, Liu,
    I have the same problem, under following conditions:
    Windows XP SP 3 (german) and - another place - Windows 7 (32 bit, german)
    Adobe Drive 2.1.0.204, as a client from a VersionCueServer CS4, version 4.0.1.090
    Adobe Bridge, opening an InCopy-File (*.icml) form here
    Adobe InCopy CS4 (version 6.0.6), checkout from here does not work: 
    InCopy-File is ever write-protected
    Is there any software-patch or workaround available, until Adobe Drive 2.2 is on the market?
    Thanks in advance for your answer, Yours sincerly Thomas Diedrich

  • APP ::::It clearning my open items, But spool and check dislay problem

    Hi
    Gurus, 
    Thanks for your time,
    When i run APP, it will clearing all my open items from my house bank,  when i try to display the check register it will show no check information. 
    and i want view print preview my vendors summary information, advice notes.
    Please help me.  i trying last 5 days same problem.
    Thank you
    anil.

    Hi
    Once you have the check the Cheak lot no  and select cheak lot seqencialy and non-rsequencilly,but App run the cheak lot select the non-rsequencilly,other we FBZP bank determation field ,
    regards
    suresh

  • Check printing problem in  Tcode F110...Urgent

    Hi All,
              I am getting problem in check printing.
    While I am running the Tcode F-58 I am getting check printing exactly in one page.But the problem here is when I am printing the check using Tcode F110 its giving print in 3 or 4 pages.The last page is getting the correct Invoice entry ,but the first three pages are getting prints like VOID**VOID*.
    How to delete the first three unwanted pages which contains VOID.
    Please let me know abt this issue.
    This is an Damm urgent issue.
    Thanks in Advance.
    Regards,
    Sudheer.

    Hi,
    Well, as it's so urgent.....
    This is standard functionality, designed to make sure the cheque paper is correctly linded up in the printer.  The number of pages is set in the selection screen of the print program in field 'Number of sample printouts'.  Set this to 0 to stop the pages appearing.
    Regards,
    Nick

  • Bapi_Document_Create2: Check In Problem

    Hi All,
    we want to perform Transaction CV01n via FM.
    I tried the BAPI_DOCUMENT_CREATE2 to to the Job but i cant find the correct Parameter to Check in Documents into the Archiv.
    The Parameters lt_files-storagecategory = 'SAP-System' and lt_files-storagecategory = 'VAULT' are shown but the Archiv is missing.
    I found the Destiation Link in Transactin OAC0 (Content repository), it has te Value XY and The Type is ARCHLINK.
    Any Ideas on this toppic?
    Best Regards
    SR

    Hi everyone,
    Due to holidays, i gotta  post under another account...
    There was a logical mistake in my problem:
    -> i thought i had to do the physical checkin of the files while or after the BAPI_DOCUMENT_CREATE2-call.
    In my case, the content-server is reachable from the app-server as it's been defined in the AL11.
    The content-server is directly defined in table TDWD with complete directorypath as a vault-server (NO DVA-VAULT).
    The SAP-FBs do actually handle two cases for file-checkin that can suit my concern::
    -> DVA-Vault?->FTP-Connect for filetransfer
    -> No DVA-Vault? ->Local GUI-Upload  for filetransfer
    For background-processing fails always the GUI-Upload -> normal
    I don't use any DVA-Vault -> i must do something else.
    Solution: Ridiculously easy...
    *-> FIRST :Physical Checkin over a stupid TRANSFER DATASET for the file.
    *If OK:
    *->SECOND: Call of  BAPI_DOCUMENT_CREATE2 with reference to the transferred File
    *      ->Structure BAPI_DOC_DRAW2:
    *          -> Short Dataname in BAPI_DOC_DRAW2-docfile1
    *          -> Datacarrier in BAPI_DOC_DRAW2-datacarrier1 (actually the key for the VAULT-server)
    *          -> App.type in BAPI_DOC_DRAW2-wsapplication1.
    *          -> Description, Documentype, username, laboratory are must-fields with my customizing too.
    *       ->Internal Table BAPI_DOC_FILES2:
    *          -> Short Dataname in BAPI_DOC_FILES2-docfile
    *          -> Datacarrier in  BAPI_DOC_FILES2-storagecategory (actually the key for the VAULT-server)
    *          -> App.type in BAPI_DOC_FILES2-wsapplication.
    *          -> no other fields required for this table
    *       ->(...)
    *endif.
    Now it runs fine every 5 minutes and i handle about 3000 documents a day...
    I give points to Phillip van den Heever who reminded me the AL11-Setting and i mark this topic solved as soon as i can...
    Thanks to everyone and greets,
    Guillaume Delorme

  • Sound Check/Volume Problem

    i've read in 'ipod help' in itunes that i can set all my songs to play at the same volume. i have followed the instructions (edit, preferences, playback, sound check) ticked the box and set up my ipod. but, i still have some songs that play very quietly and some that are extremely loud.
    please help.....

    I have the same problem.
    the short term and tedius solution is to individually increase the volume (or level) on quiet tracks. you can do this to individual or groups of tracks (if you know a whole album plays a lower level. when you click on information then options, there is a volume control. Here you can increase the level of the track so it plays louder.
    but i have 7000 tracks and i will never know all the quiet ones, so i am looking for a more comprehensive solution - a way to make sound check actually work...

  • Datagrid checkbox headerrenderer check off problem

    I have a datagrid where one column has select option like what we have in mail inboxes. User can select one or many row items to perform any actions by selecting the checkbox. It has also one select all option which is shown in the header renderer of that particular column. If user clicks on that all checkboxes gets selected.
    I have done that but the problem is that whenever i am performing any action by selecting all(header checkbox) and as a result the datagrid sometimes sets visible off or switches to some other mxml component from the component which is holding the datagrid and after coming back from that scenario again to the datagrid, its seen that the checkbox is still checked ... i want that checkbox to set to non-checked.
    help me.

    Hi subhajit nag,
    Say the below is your mxml component in viewStack...
    <your component>
    <mx:Script>
    <![CDATA[
    [Bindable]private var headerChecked:Boolean = false;
    private function onShow():void
         headerChecked = false;
    ]]>
    </mx:Script>
    </your component>
    <mx:DataGrid x="35" y="10" id="mydg">
            <mx:columns>        
                <mx:DataGridColumn editable="true" sortable="false">
                 <mx:headerRenderer>
                  <mx:Component>
                            <mx:CheckBox selected="{outerDocument.headerChecked}" click="checkUnCheckCheckBoxes()">
                             <mx:Script>
                      <![CDATA[
                       import mx.collections.ArrayCollection;
                   private function checkUnCheckCheckBoxes():void
                      // You can handle your logic what you want to do when header check box is clicked....   
                      ]]>
                  </mx:Script>
                            </mx:CheckBox>
                        </mx:Component>
                 </mx:headerRenderer>
                    <mx:itemRenderer>                
                        <mx:Component>
                            <mx:CheckBox selected="{data.isSelected}" click="{data.recselected = !data.recselected}"/>
                        </mx:Component>
                    </mx:itemRenderer>
                </mx:DataGridColumn>
                <mx:DataGridColumn headerText="Column 1" dataField="firstName"/>
                <mx:DataGridColumn headerText="Column 2" dataField="lastName"/>           
            </mx:columns>
        </mx:DataGrid>
    So you just need to change the value of the headerChecked  bindable variable to false..in show event for your first scenario...and your header check box is automatically unselected because this check box is binded to a bindable variable to which you are setting to false...
    For your second scenario....you can use the same changing the headerChecked value to false...
    You need to set this varibale to false in your second scenario where you know that your Header Render datagrid is making it visible after you made it unvisible...
    say you have clicked header check box and you made this datagrid invisible and this header checkbox datagrid will be visible once again when you click toggle button so set the value to false in the toggle button click function....
    private function toggleButtonClickHandler():void
         headerChecked = false;
         yourHeaderChkDataGrid.visible = true;
         yourAnotherDG.visible = false;
    Hope this is clear for you now...Try this and let me know...
    Thanks,
    Bhasker Chari

  • Check print problem

    Hi
    i have problem in check printing .
    we are running Z program and using the form F110_PRENUM_CHECK   and it prints check correctly when there are 30 or less than checks per document no. (it means one page ) .i am getting problem when there are more than 30 checks bcs it is printing in more than one page and we are using text element 545 (standard driver program RFFOUS_C - prints check in last page) . 
    can any body help me in this to print check in first page even there are more than 30 checks per document
    I appreciate all your help
    Thanks

    This can be done in different ways...
    1) it is required to modify the driver program according to your requirment.
    2) if you don't wnat to modify the driver program, then write the following code in your layout
    Goto check window and see where it is printing void... now replace void statement with one condition...
    Ex: IF &PAGE& EQ 1.
        Print details of the check
         ELSE.
         Print void.
        Endif.
    Now goto the actual check, and place the following condition
    IF &PAGE& EQ 1.
        Print details of the check
         ELSE.
         Print void.
        Endif.
    I guess this will help to solve your issue.
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • Input control -Check Box Problem in webi4 over Bex query

    Hi All
    i am in webi4 over bex query
    my customer requirement is to have the option to select multiple values from object (e.g Document class) with out the need of presenting the field(e.g document class) in the report
    when I use the input control check box or list box i have the following problem
    if I select from the input control all values I see the report ok
    if I select 2 values from the list I receive #UNAVAILABLE , but if i add the field to the report ( the document class) it works fine.
    the problem is that  if I don't have the field in the report i get the #UNAVAILABLE
    any assistance is appreciated
    Thanks

    Hi,
    this question has been asked many times before on this forum, so do please search first.
    Here's some steers : http://forums.sdn.sap.com/thread.jspa?messageID=10852102#10852102
    and : http://forums.sdn.sap.com/thread.jspa?messageID=10838993#10838993
    Also, do search the knowledge base articles over here in the cross-search: www.service.sap.com/xsearch
    you keywords would be "4.0 webi #UNAVAILABLE"    (there are 12 sap notes about this)
    Finally, make sure you use all the latest Patches (Patch2.11,  2.12 next week) to include corrections.
    Regards,
    H

  • Web Part Page check in problem

    I created a simple web part page that contains a web page viewer web part.  I filled out all available fields during creation.  It was stored in the default Shared Documents folder.  I can link to the web part page with no problems.  However, others can't because it is check out to me.  When I try to check it in, I get the "You must fill out all required properties before checking in this document" error.  When I click "Edit Properties", everything is filled out.  I noticed that if I click "View Properties", a "Title" field is visible.  How can I fill this out???  It wasn't available during creation and I have no idea how to fill it out because it doesn't show up after clicking "Edit Properties.  This seems really buggy.

    I currently have this problem running wss3.0 in a portal I have created. Two existing document libraries contain web part pages which do not require check in/check out. However in the last day or two, every new page created is automatically checked out to myself, but I cannot check the item back in. I have the following show up:
    "You must fill out all required properties before checking in this document."
    I have followed the procedures above to add the web part as an extra content type to the list, and hiding the title column so its not needed, but i still receive this error message. It only seems to be happening on this particular portal, and not others. The fact exisitng pages in the document library do not require items to be checked out makes it very frustrating trying to resolve. Ive searched TechNet but cant find any more details. I've even tried to force check in using Sharepoint Designer but this also does not work.
    Does anyone have any ideas? Every new document library i create contains checked out items for this portal now, so others cannot view.
    thanks,

  • 10g R2 NVARCHAR2 check constraint problems

    Hi, Thanks for taking a look...
    I've just installed 10g R2 on Solaris 10 and run into a small problem with NVARCHAR2s.
    I have a table with a check constraint to make sure the column is a valid value on an nvarchar2 column. Querying the table for a specific value results in no data found, however the data appears to be intact.
    The database NLS_CHARACTERSET is AL32UTF8 and NLS_NCHAR_CHARACTERSET is AL16UTF16.
    I think the following script results can show the problem better than I can explain it.
    Any suggestions would be appreciated. Thanks.
    Mike
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 17 13:51:40 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
    With the Partitioning and Data Mining options
    SQL> @problem_script.sql
    SQL> create table foo (
    2 bar nvarchar2(10) constraint ck_bar check (bar in ('abc','def'))
    3 );
    Table created.
    SQL> insert into foo values ('abc');
    1 row created.
    SQL> commit;
    Commit complete.
    SQL>
    SQL> REM Strange. This worked in every version prior to 10g R2.
    SQL> REM Why doesn't it work now?
    SQL>
    SQL> select * from foo where bar = 'abc';
    no rows selected
    SQL>
    SQL> REM Even more strange is why this doesn't work:
    SQL>
    SQL> select * from foo where bar = N'abc';
    no rows selected
    SQL>
    SQL> REM Stranger still are these two queries:
    SQL>
    SQL> select bar, decode(bar, 'abc', 'It matches', 'No it doesnt')
    2 from foo;
    BAR DECODE(BAR,'A
    abc It matches
    SQL>
    SQL> REM This is still strange, but not unexpected given the prior query
    SQL>
    SQL> select bar, decode(bar, 'abc', 'It matches', 'No it doesnt')
    2 from foo
    3 where bar = 'abc';
    no rows selected
    SQL>
    SQL> REM Strangest of all is why this DOES work:
    SQL>
    SQL> alter table foo disable constraint ck_bar;
    Table altered.
    SQL> select * from foo where bar = 'abc';
    BAR
    abc
    SQL>
    SQL>
    SQL> REM Regular varchars are unchanged...
    SQL>
    SQL> create table bar (
    2 foo varchar2(10) constraint ck_foo check (foo in ('abc','def'))
    3 );
    Table created.
    SQL> insert into bar values ('abc');
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> select * from bar where foo = 'abc';
    FOO
    abc

    Nope.
    SQL> select * from foo where bar = TO_NCHAR('abc');
    no rows selected
    Of all the things I've tried (and I think I've tried just about everything), only the TO_CHAR(bar) and disabling the check constraint work. The fact that DECODE(bar, 'abc', 'true', 'false') in the select list is also confusing since it's converted there correctly, but not in the WHERE clause. And why does it work as epxected when the constraint is disabled?
    My thoughts are that it can't be an Oracle bug, otherwise I'm sure I wouldn't be the first to find it. I've built the instance using the same configuration script I used for the 10g R1 database that works, so the configuration parametes are the same.
    More things that don't make sense:
    SQL> select dump(bar), dump('abc') from foo;
    DUMP(BAR)
    DUMP('ABC')
    Typ=1 Len=6: 0,97,0,98,0,99
    Typ=96 Len=3: 97,98,99
    SQL> select dump(bar), dump(to_nchar('abc')) from foo;
    DUMP(BAR)
    DUMP(TO_NCHAR('ABC'))
    Typ=1 Len=6: 0,97,0,98,0,99
    Typ=1 Len=6: 0,97,0,98,0,99
    Thanks for your help though...
    Mike

  • Jdeveloper 9i check updates problem

    Hi,
    I wanted to update my Jdeveloper 9i with OA extension to have Junit.
    So I went to Help > Check for updates > and the rest of the wizard.
    The below is what I get:
    "An error occurred while getting updates from OTN. This may be due to a network
    problem, proxy settings or the update center may be temporarily unavailable.
    Details: Attribute value should start with quote."
    I have setup the proxy information in the webbrowser/proxy in the tools ->preferences menu. And the same setup is able to go to OTN in JDeveloper10g.
    Any ideas what is wrong?
    Thank you very much!
    Regards,
    Arun

    Download the Junit extension from the extension exchange:
    http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/1012index.html
    for 10.1.2/9.0.5 and there is a link there for older versions.
    For OA Framework you need to get a specific patch from Oracle Support - you can't use check for update for this.

Maybe you are looking for