Check List Option can not allowed same item People Window

Human Resource
People windows > others > Checklist
In checklist window system not appearing item once i have entered,now i need to re-enter same item for new record.
Kindly help this regard & thanks allot in advance.
Furqan Hussain

Human Resource
People windows > others > Checklist
I am talking about Employee check list which navigation mentioned above rather the Life Event.
Now problem is when enter item from the select of list is fine ,but after saving i enter same item with new record as well as status is not appearing in list.
Kindly help this regard & thanks allot in advance.
Furqan Hussain

Similar Messages

  • EDI Error : Condition EDI1 is not allowed as item condition

    Hi EDI Gurus,
    Right now I am getting the error while creating a Sales order through IDoc.
    "Condition EDI1 is not allowed as item condition"
    Clarify a few things to me:
    1. Where to pass the Customer Expected Price on the IDoc.
    2. How to maintain pricing Condition EDI1. (If it is necessary for processing of sales order)
    Please clarify these two things.
    Thanks,
    Matt

    I ran V/O8 transaction. There were a bunch of procedures listed in it.
    I was not sure which procedure I should look for EDI1 pricing condition.
    I checked RVAA01 (Standard) - there are two conditions EDI1 and EDI2.
    I am not sure what I should do. Whether they are already configured or not I am not sure.
    If they are already configured, why is it giving error in EDI process.
    MxG,
    Please enlighten me.
    Thanks,
    Matt

  • Error message MH 175 "The listing end is not allowed to be in the past"

    Hi,
            While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
    thank you
    regards
    prahlad

    Hi,
       Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
    Regards
    GK

  • Your profile option does not allow automatic numbering error when trying to load BSA

    We are getting this error while trying to load BSAs. The profile option is set to always at the responsibility level,
    The same code and settings were tested in lower instances and it went through fine
    Document sequence is set correctly.
    Any inputs to resolve this issue would be greatly appreciated. It has stopped out production Data conversi
    Thanks
    R

    Hi Winsky,
    Ensure Profile: Sequential Numbering must be set to: 'Partially Used' at app level
    Refer the following note and check whether it helps:
    I Get The Error: Your Profile Option Does Not Allow Automatic Numbering. [ID 560388.1]
    In Order Import stuck record with error "Your Profile Option Does Not Allow Automatic Numbering" [ID 1083645.1]
    Best Regards,

  • I CAN SELECT A ITEM WITH TRACK PAD, But can not open the item

    Mac Book 15 inch
    OS X 10.10
    New to Mac
    Using track pad I can select an item by one click but can not open this item with 2 clicks.

    Go to System Preferences>Track pad and check the Secondary Click settings

  • I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

    I've had a fault with the hard drive on my laptop, it's been replaced and now my iphone and ipod can not sync unpurchased items with itunes. Is there anyway of sorting this without uploading all of my CD's again?

    If your CDs are on your iPod/iPhone, they can be recovered from there,see this post:
    https://discussions.apple.com/message/11857427#11857427
    Your problem shows the importance of making backups.

  • Solaris 10 cluster:failover project or zone can not have same name?

    Oracle on Solaris 10 cluster: two node SUN cluster fail over, SA advised using different account (oracle01 for node01, oracle02 for node02) to failover cluster, why can't I create same 'oracle' account on both node?
    failover different project or zone can not have same user or group account name?
    thanks.

    Hi Vangelis,
    Building a cluster, requires some planning and understanding the concepts.
    A good start would be reading some of the documents linked to in this url: http://docs.sun.com/app/docs/doc/819-2969/gcbkf?a=view
    Regards,
    Davy

  • Essbase can not drill down items in Chinese

    Hi, there, I just encounter the problem that Essbase can not drill down items in Chinese.
    In the outline, I use code for member name. Zooming in at member code is OKAY.
    However, when I changed alias table to show Chinese, I could not double click the Chinese item.
    Could anyone help? Thanks in advance.

    The problem only happens to SmartView 11.1.1.2. However both Essbase Addin and OBIEE works fine. Very riduculos.

  • Can not open new blank tab window from file, new tab.In Tools/Options/Tabs ticked open new windo w in new tab?

    Can not open new blank tab window from file, new tab.In Tools/Options/Tabs I have ticked open new window in new tab?

    The Ask Toolbar is probably causing that in the Firefox 3.6.13 version. Disable that extension or un-install it.

  • One of my friends is getting an error "Can not buy this item. You must buy the application to which this item is intended to buy the item" when they try to make an In app Purchase

    More Details: http://feedback.photoshop.com/photoshop_family/topics/cannot_download_camera_pac k_inside_photoshop_app
    My friend is trying to purchase an IAP on Adobe Photoshop Express, however they get an error saying "Can not buy this item. You must buy the application to which this item is intended to buy the item" when they try to make an In app Purchase". Everything other app is working fine.
    Any thoughts/suggestion to make this error go away?

    I suggest trying the update again after an hour or two.  Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.

  • The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

    Hi there,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Additionally, you may want to try completely disabling and re-enabling restrictions.
    -Griff W.

  • HT1848 i  can not transfer purchased items music apps ect to my new computer is it bc i had been using my old one to do it and it broke?

    i can not transfer purchased items from my ipod to my new computer. i was using my old computer to do this however the screen broke and cant use it any more. does that have something to do with it? i have tried to authorize my new one however it will not for this certain i pod

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have firefox 8 when i try to go in yahoo games lobby list i can not get in the lobbys off that page

    i have firefox 8 when i try to go in yahoo games lobby list i can not get in the lobbys off that page

    i have firefox 8 when i try to go in yahoo games lobby list i can not get in the lobbys off that page

  • Java daemon on boot: "This user is not allowed access to the window system right now."

    The daemon is located in /Library/LaunchDaemons/ and launches successfully on most occasions. However, it sometimes fails to start with this error:
    Nov 17 20:36:24 server.local java[28972]: This user is not allowed access to the window system right now.
    Nov 17 20:36:24 server com.apple.launchd[1] (net.java.server): Throttling respawn: Will start in 10 seconds
    I have the server command running as a background daemon using its "nogui" option (the developers claim to have written it to not display a gui). However, it seems that somewhere along the line, Java is trying to display something. As the daemon is running before users log in, it gives this error. Once a user is logged in to the system, it runs fine; however, logging in a user to run the server is not an option. It needs to run on boot.
    Any ideas for how to solve this? I'm going to contact the developers to see if it may be something they can fix, but I want to be able to force the issue in case the problem ever occurs in the future.

    Irrespective of any claims by the developer, this certainly appears to be a test case that shows that the tool is not working as expected, and that the application has a bug.  This test case would be better if there was some evidence around why only some of the startups fail, but in general this will involve what's been suggested earlier:  "Contact the application developer."  
    As some general background on what's involved, see daemons and agents and related; processes that are not allowed to connect to the GUI for reasons of security.
    I'd also suggest testing your DNS, as seeing "server.local" can imply local DNS configuration errors.   Launch Terminal.app  from Applications > Utilities and issue the following harmless diagnostic command and see if it reports no changes, or if it detects network or DNS errors:
    sudo changeip -checkhostname
    If this is OS X Server and a NAT'd network, you do not want to reference any DNS servers located off of your NAT'd network.
    Why DNS?  Because DNS errors can cause only some operations to fail, particularly if there's more than one DNS server selected (and where some subset of the DNS servers are malfunctioning or misconfigured).

  • W530 Can not see SSD (Bios or Windows Installati​on)

    Hi all,
    I have been workign on this for a bit now and can't see mto get it figured out. I referenced past threads on this forum for help, but so far no luck.
    Basically I am tryign to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what driev you want to install windows on).
    I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that helped my original issue.
    I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
    Any ideas on what I am missign here to get this SSD to show up?
    Thanks,
    Jeryn
    Solved!
    Go to Solution.

    Are you replacing the spinner in your W530 with the SSD? Main drive bay?
    The side rails from the old spinner must be removed from the old drive and attached to the sides of the SSD, before putting it into the bay.  However as is shown in the user manual, they actually must be attached "upside down" (or maybe inside out as well?? I forget now) for the SSD from the orientation that they had with the spinner.  I assume this is because of a slight height difference in the two drives as far as where the rear electrical connector on the drive mates with the correnspinding connector inside the bay.
    The reversal of the side rails will raise (or lower?) the SSD drive, so that its electrical connector meets the drive bay electrical connector properly.  Now when you push in the SSD drive all the way, you're really making true electrical contact and presumably the SSD will now be seen.
    With the side rails attached incorrectly, when you push the SSD all the way in, the drive electrical connector is completely missing the drive bay connector, and there is zero electrical contact.  It's just sitting in the drive bay physcially.
    I made this same mistake myself when installing my Samsung 840 Pro SSD to replace the factory 500GB spinner in my own W530. Played with this for an hour, before finally interpreting the picture from the user manual as an indication there were two different orientations of the side rails that were actually different, for spinner vs. SSD, and exactly what that meant in terms of attaching the rails to the drive before inserting it into the main bay.

Maybe you are looking for