Check Lot Configuration

Experts,
Is there any place we need to mention the length of the check lot while configuring house banks ? The reason i am asking this is i am configuring check lots for a house bank and i get this error when it is 7 digits long i.e 7000000 to 7999999, where as when i make it nine digits i don't see any error.
The error i get is "  Check the format of the check numbers - Message no. FIBL 664"
Could someone please let me know how to overcome this error.
All answers would be duly appreciated and rewarded with points.
Thanks,
Nandita

Hi Nandita,
You can swith off this message in the below.
SPRO/Cross-Application Components/Bank Directory/Change Message Control For Bank Master Record.
Here you enter the Application Area FIBL and check is there any entry with message number 664. If yes then, change the status to Switch off. If not create a new entry with this number and give the status to swithc off.
And one more thing please check the User Name field also. If you give blank it will applicable for all the users.
Best Regards
Swamy

Similar Messages

  • House bank with multiple banks account ids - f-58 paymt+check -check lot NA

    I have a House bank (Indian Bank ) with three bank acccounts under that House bank.
    I have created house bank as " INDBK"
    and I also created account ids :
                Current account 7509 - Account id is " 1000"
                 (ii) Staff salary account - 8141 - Account id is "1100"
    In OBZ5 , Iam able to save only one of account ids with House bank " INDBK"
    i.e.,
    Either  INDBK with Account id 1000 - in which case Iam able to do f-58 payment transaction
    OR
    INDBK with account id 1100 - in such case Iam able to do f-58 payment transaction
    Iam able to do EITHR of the above .When I tried to save both account ids with same house
    both an error message is displayed - " duplication entry "
    Pls adivse how can all accounts under a house bank can be configured for F-58 pymnt+check.
    Looking forward for your help.

    HI -
    It appears in FBZA you can only assign 1 house bank linked to 1 account ID 1-2-1 relationship.
    Therefore can anyone tell me why this error is triggering in F-58? Check lot not found.
    I have setup the check lots via FCHi, when I try to create the Account ID in FBZA, I get the error below, Can anyone please tell how we can use Other Account IDs via F-58, at the moement we are using for our head-office IBHO would like to use for the above 3 branches - Which has the same house bank but different account ID.
    Target key must be different from source key
    Message no. SV015
    Thanks
    Jay

  • Check lots by Business Areawise in F110

    HI Experts,
    I have a scenario, where i need to have a seperate Check lots for Business areawise. My Buss areas are my locations. The requirement is - i have one House Bank, one Acct Id & 10 Check lots. when i run Auto payment, system should pick the check no's for Buss area-x001 vendors from check lot-1 and for Buss area-x002 vendors from check lot-2, similar to this all Buss areas vendors with different Check lots. Please help me to configure this in SAP, where i can automate this.
    Thanks & Regards
    Kanna

    Dear Kanna
    Although Check lot can't be created Business Area wise but you can do one thing to fulfill your requirement.
    Create Check different check lot, Give Business Area in description of Check lots
    Go to F110
    In Free Selection Tab enter choose Others
    then find field for document
    Choose field label Business Area
    In Printout/data medium Tab
    Maintain different variants in combination of Business Area, House Bank, Account ID and Check Lots
    In this way you will be able to print checks per business area for each Business Vendor.
    Hope it solves ....
    Cheers
    IMK

  • Check lot printing

    Dears,
    I have configured the cash journal printing to be printed in pdf, but i could not set check lot to be printed as pdf .so, can anyone help me in how to print check lot from FBCJ in PDF form
    Thanks a lot and appreciating your quick response

    Hi,
    Cash Journal Print Program need to be created as Z in the transaction code FBCJC3
    And select PDF Forms check box.
    Ravi Polampalli

  • Admin tool could not load the essbase driver.Please check the configuration

    Hi All,
    I have obiee11g installed machine and want to connect that machine with essbase.
    For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
    *1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
    *2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
    *3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
    After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
    And also I manually added the essbasepath in bi-init.cmd file.
    Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
    "*Admin tool could not load the essbase driver.Please check the configuration*."
    kindly guide me to overcome this issue.
    Thanks and Regards
    sai
    Edited by: 923924 on Apr 24, 2012 5:20 AM

    Until you perform the configuration on the AD server, the following message will appear:
    Error: Could not start the SSO service. Please check the configuration.
    So configure the AD server so that the error message will not appear again.

  • Error 0x80090318 and lots of other errorsI live in Iran  Yesterday i wanted to use itunes store for windows ; when i have open itunes it gives me the error 0x80090318 .  I have search the wb alot and i have check lots of Iranian and English website but ha

    I live in Iran
    Yesterday I wanted to use iTunes store for windows ; when i have open iTunes it gives me the error 0x80090318 .
    I have search the web alot and i have check lots of Iranian and English website but have not find any solution for
    this problem . Today I have find a software called "Hide my IP" i have opened up that
    when this software was opened , itunes have said "iTunes can't verify the identify of the server "init.itunes.apple.com"".
    then i have click on "continue" then iTunes said "iTunes could not connect to the iTunes Store. An unknown error occurred (310)."
    And theres a matter that i think that have a connection with this topic and thats , that when i want to go to the lots
    of websites like Google Yahoo! Mail and lots of other website my both browser ( FireFox and IE ) will say" This connection is untrusted " .
    I think the solution of my second problem is the solution of my first problem too !

    Tried all the rest on this site did not work for me
    Follow the link below & this one sorted it for me, it was a conflict in programs using Winsock & I got rid of my old program,
    Sorted.
    http://support.apple.com/kb/TS4123
    Tom Ireland

  • Variant configuration u2013 availability check for Configurable material

    Hi Guys,
      We are doing the variant configuration scenario for one of our client. We are using planning strategy as 25 (sales order with variant configuration).
      When we configure the Configurable material at sales order level, we wanted to check the availability check of Configurable for the combination of selected characteristics.
    How we can configure it in the system.
    Regards,
    Shailendra

    Hi,
    availability check will work as per the checking group you had defined in system.
    additionaly you need to put tick in configuration profile for availability check.
    checking for material varient is optional, if your bussiness has materail varients you can activate type matching and while configuring the sales order if the values of charactersticks matches system will suggest you the the appropiate varient and you can replace your configurable material in sales order with it.
    hope it will help you.
    If you need some more information please explain what exactly your are expecting from system during availability check.
    Regards
    Ritesh
    Edited by: R S D on May 28, 2009 7:29 AM

  • Availability check for configurable material.

    Hi,
    We are implementing SAP ECC-6 & facing
    issue during availability check for
    configurable materials.
    I'd like to take an example of
    computer for better understanding.
    Will consider Computer as super BOM and
    following 2 as BOM:-
    BOM-1. a)Monitor b) Cpu c)Key
    Board d)Scroll Mouse e)With
    Mouse Pad.
    BOM_2. a)Monitor b) Cpu c)Key
    Board d)Optical Mouse e)With
    out Mouse Pad.
    But Customer wants A)Monitor B)Cpu c)
    Key Board D)Optical Mouse e) With
    Mouse Pad.
    In the above case System will not show
    %age of Configurable materials
    available & Vice-versa but rather it
    creates requirement for computer and
    it gives availability as the lead time
    maintained in the Material Master of
    the Super Bom.
    Here the busines requirement is that
    it should show %age of configurable
    materials
    available.
    Plz find the attachment for your kind
    reference.
    Kindly guide me to sort out this issue.
    Thanks & Regards,
    Chandru

    Dear Sir,
    Thanks for the guidance/ reply . Still we have some doubts in this:
    As per your instructions, I have created sales order and  did the MRP run for the same.
    I got the planned order, then I have checked the ATP in Planned order change view and got the following results.
    No. of components checked:   641
    Missing parts:   640
    Overall confirmation date could not be determined 
    But  where I can see the Percentage of Avaialble and percentage of to be produced.
    Please guide me.
    Thanking you
    Regards
    Chandru

  • AUTOMATIC PAYMENT PROGRAMME - Check Lots

    Hi All
    When I m defining check lots in t.code FCHI, there are two fields:-
    1   check no. from
    2  check no. to
    When I am entering different values in these fields, system is giving error message "checks numbers can not have different length"
    Plz expplain these two fields. What is the relevance of these two fields.
    With Regards 
    Deepak garg
    Mob 9213784161

    Hi Deepak,
    In your examble, you have mentioned the starting number 100000 (6 digits) but ending number 1001000 (7 digits).
    In practical business scenario, this will not come as the banks can issue only 6 digits check numbers in india.
    To answer you question, go to TC: OBA5 give application area "FIBL"  if the Message Number "664" already exist with some user name, delete that and click on new enteries
    maintain the following parameters,
    Msg    user name  Online  Batchl  Standard
    664      <blank>         S           S      By default it will be "E"
    Save and now create two check lots,
    1. from 100000 to 999999  (next lot give your 1000000 to 1001000 lot number)
    2. from 1000000 to 1001000.
    Hope it clears your doubt
    Regards
    A.Saravanan.

  • Create check lot for cash journal

    I need to create the check lot in order to link this to cash journal.
    Currently we are using the check lot to pay vendors (AP) and the doc
    type KZ is triggered and other payments through GL which gives doc type
    PV.
    Now I will need to create a check lot in order for receiving a check
    into my petty cash through the cash journal.
    Usually, the steps involved is via FCHI, FCH5 and lastly FBZ5.
    How do I ensure that when a check is issued from our bank to cash
    journal and I record this in FBCJ, the doc type triggered is also PV.
    Another problem is that we require the payment advice to be created for
    the check issued via FBZ5.
    Regards.

    Can't it be routed through one time vendor account
    issue a check to one time account & later in FBCJ do a receipt from the same one time account. So you dont have to create a sepreate check lot for cash journal.
    One time account has to be cleared manually.
    You dont have to use check related transaction to create the checks sepreately,
    Hope this solves your issue.
    Revert if not solved in detail.
    Thanks,
    Chandu
    Message was edited by:
            Chandu

  • Check lot not found

    Hi,
    when i made payment through f-58 and selecting check lot no 7 of account ID HD15 and House bank HDF14 than system prompt me message that "check lot not found".
    when i check FCHI there is already check lot created, and also we have issued 15 checks from this check lot.
    so what to do.
    Our configutratin is like:-
    House bank HDF14, AccountID HD14, check lot no 7.
    House bank HDF14, AccountID HD15, check lot no 7.
    mean to say same house bank with same check lot but in different Account ID.
    Please provide solution

    hi,
    1.DEfine house bank FI12 check once again
    check lots creation t.code FCHI
    Financial Accounting Accounts Receivable/Payable
    Business TransactionsOutgoing paymentsAutomatic outgoing paymentsPayment MediaCheck ManagementDefine No Ranges for Checks
    1. Sequational : check lot automatic payment programme
    2. Non seuational : Manual payments

  • Check lot 0003 is full create new check lot.

    Hi,
    when i made a payment through F-58 sytem promt me message "check lot 0003 is full create new check lot".
    i have checked that in FCHI 0003 lot no is created. but even system through this message.
    after that i delete this 0003 check lot and create 0004 check lot with same check numbers.
    and start doing payment at this movement system doen't shows me any message.
    can any one reply and clear why it is so. why the system show me message with check lot no 0003 even with both lot no's i select the same check no's
    Regards

    Hi Kuldeep
    My question is how were you able to delete the check lot when the checks have been used.
    The system should have thrown you an error.
    srikanth.

  • Single Check lot two house banks

    Hi All
    We have a requirement where we need to use the same check lot for two house banks.
    For example, check number 102 is printed from house bank 1.
    And i am printign next check from house bank 2, in that case it should generated check number 103
    How can i accomplish this task.
    Any inputs will be rewarded
    Thanks
    Rajesh

    Hi
    Your requirement cannot be met, I suppose.  Cheque lots are created per house bank, account ID and company code.  System only keeps track of the cheque lot numbers (say 001-100).  While creating a cheque lot of another house bank, you can use the same range.  System interprets these as two separate cheque lots.  There is no other identifying criteria for the system to sense from the cheque stationery to distinquish between different banks.  It is for the users to preserve a cheque lot separate for each house bank.  If you use the same cheque lot also, system will keep the track of the cheque number with respect to a particular house bank only.  What I mean to say, if you use the same cheque lot for two house banks, once you print the cheque from one house bank, it reduces that cheque number from the range no matter you are printing it from one house bank or another.

  • Check lot and check register

    hi,
    what is check lot and check register?
    what is the difference?
    thanks

    hi Elina,
    for eg
    Check lots are nothing but when u create the Check number in FCHI that number will be stored for the each check lots. Each check booknumber is called as a Check lots. Tcode FCHI
    For eg. Check lot range is from 1000 to 1100 and this current check lot is called as  check lot 1 .
    Check Register nothing but where u can see all the checks that are printed after the payment...  Tcode FCHN.
    plss assign me the points...
    Ranjit

  • F-58 Print check without check lot number

    Hi experts,
    I am testing the check printing function via F-58. The scenario would be without the check lot number because user will manually feed the check into the printer while printing.
    But as i test in F-58, system keep forcing me to enter the check lot. Does anyone know how to print via F-58 without the check lot?
    Thanks in advance.
    Best regards,
    TCS

    Mate,
    Answer to your query is
    Post the payment through F-53 manually
    Go to FCH5   -  Give the Payment document and input the Check Number here.
    Note: What ever is the next Check number from the Check lot deifned in FCHI, User has to give that only.
    F-53
    FCH5
    Hope it clarifies
    Thanks
    Edited by: nkonnipati on Feb 13, 2012 8:20 AM
    Edited by: nkonnipati on Feb 13, 2012 8:20 AM

Maybe you are looking for