Check lot Numbers length

Hi friends,
in check lot creation (FHCI) previosly we have created check lot with 5 digits (eg 12345) but, now we want to create with 6 digit  (eg 123456)...can anyone help for this issue
With regards,
Gopal Krishna

Hi
Error is mentioned down
Check the format of the check numbers
Message no. FIBL664
Diagnosis
A check number consists of a numeric character string, but can contain a non-numeric prefix (CH000014) or suffix (000014X).
The structure of the check number entered does not correspond to the other check numbers of the bank account. There could be discrepancies in the length, the prefix, or the suffix.
Effects on Customizing
You can define when this system message is to be issued in accordance with your requirements.
You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
The application area and message number can be taken from the technical documentation.
Gopal Krishna

Similar Messages

  • AUTOMATIC PAYMENT PROGRAMME - Check Lots

    Hi All
    When I m defining check lots in t.code FCHI, there are two fields:-
    1   check no. from
    2  check no. to
    When I am entering different values in these fields, system is giving error message "checks numbers can not have different length"
    Plz expplain these two fields. What is the relevance of these two fields.
    With Regards 
    Deepak garg
    Mob 9213784161

    Hi Deepak,
    In your examble, you have mentioned the starting number 100000 (6 digits) but ending number 1001000 (7 digits).
    In practical business scenario, this will not come as the banks can issue only 6 digits check numbers in india.
    To answer you question, go to TC: OBA5 give application area "FIBL"  if the Message Number "664" already exist with some user name, delete that and click on new enteries
    maintain the following parameters,
    Msg    user name  Online  Batchl  Standard
    664      <blank>         S           S      By default it will be "E"
    Save and now create two check lots,
    1. from 100000 to 999999  (next lot give your 1000000 to 1001000 lot number)
    2. from 1000000 to 1001000.
    Hope it clears your doubt
    Regards
    A.Saravanan.

  • Check Lot Configuration

    Experts,
    Is there any place we need to mention the length of the check lot while configuring house banks ? The reason i am asking this is i am configuring check lots for a house bank and i get this error when it is 7 digits long i.e 7000000 to 7999999, where as when i make it nine digits i don't see any error.
    The error i get is "  Check the format of the check numbers - Message no. FIBL 664"
    Could someone please let me know how to overcome this error.
    All answers would be duly appreciated and rewarded with points.
    Thanks,
    Nandita

    Hi Nandita,
    You can swith off this message in the below.
    SPRO/Cross-Application Components/Bank Directory/Change Message Control For Bank Master Record.
    Here you enter the Application Area FIBL and check is there any entry with message number 664. If yes then, change the status to Switch off. If not create a new entry with this number and give the status to swithc off.
    And one more thing please check the User Name field also. If you give blank it will applicable for all the users.
    Best Regards
    Swamy

  • Maintain Check Lots

    Hi Experts,
    I'm trying to maintain check lots in FCHI for several housebanks. I have successfully maintained the check number series on all housebanks except for one.  The error below ppeared when I tried to save the data.
    Check the format of the check numbers
    Message no. FIBL664
    Diagnosis
    A check number consists of a numeric character string, but can contain a non-numeric prefix (CH000014) or suffix (000014X).
    The structure of the check number entered does not correspond to the other check numbers of the bank account. There could be discrepancies in the length, the prefix, or the suffix.
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    You do this in Customizing as follows: Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation
    Thanks,
    Cecille

    Check this thread it has been solved already [Re: New check lot with 6 digits|Re: New check lot with 6 digits]

  • Check lot issue..

    Dear Experts,
    At my client place client want to extened check lot chars upto 10 digitis but in sap it takes 7 only
    please provide your inputs..
    With Best Regards,
    Satish

    You might get this error message while creating a new lot, you can change this message to 'S' (Note in footer) or completely switch off message in change message control, transaction OBA5.
    Check the format of the check numbers
    Message no. FIBL664
    Diagnosis
    A check number consists of a numeric character string, but can contain a non-numeric prefix (CH000014) or suffix (000014X).
    The structure of the check number entered does not correspond to the other check numbers of the bank account. There could be discrepancies in the length, the prefix, or the suffix.
    Effects on Customizing
    You can define when this system message is to be issued in accordance with your requirements.
    In Customizing, choose Cross-Application Components -> Bank Directory -> Change Message Control.
    The application area and message number can be taken from the technical documentation.
    Regards,
    Ganesh

  • Why Inspection lot numbers are not in sequance?

    Hi All,
    In my business scenario I am creating inspection lot for inspection type 01. System does not create the inspection lot number in sequence for example if I do the GR system creates the inspection lot number say 1000000016, and after some time if I do the GR for the same PO and material I am getting the inspection lot number 1000000019, 25,35,175,225 like this? can some one let me know on this why this is happening? I checked in QALS table for the list. All created inspection lot numbers are not in sequence?  Pls let me know
    Thanks & Regards
    Kundan

    This has been asked and answered many times in the past.  Please search the forum.  Google before posting!
    Please review this topic:
    Inspection lot number ranges skipping
    It has way more info in that topic than you probably ever want to know. 
    I have it on good authority that Craig is a very good consultant.     And Isabelle is an SAP employee and also responded about the issue.
    FF

  • Check lot 0003 is full create new check lot.

    Hi,
    when i made a payment through F-58 sytem promt me message "check lot 0003 is full create new check lot".
    i have checked that in FCHI 0003 lot no is created. but even system through this message.
    after that i delete this 0003 check lot and create 0004 check lot with same check numbers.
    and start doing payment at this movement system doen't shows me any message.
    can any one reply and clear why it is so. why the system show me message with check lot no 0003 even with both lot no's i select the same check no's
    Regards

    Hi Kuldeep
    My question is how were you able to delete the check lot when the checks have been used.
    The system should have thrown you an error.
    srikanth.

  • "The even-numbered length of the DEC field I_DFZ_EX can lead to problems"

    Hi All,
    I am getting the following warning message while activating the PP datasources,
    2LIS_04_P_MATNR
    2LIS_04_P_ARBPL
    Warning Message: "The even-numbered length of the DEC field I_DFZ_EX can lead to problems"
                                   "The even-numbered length of the DEC field I_DLZ_EX can lead to problems"
                                   "The even-numbered length of the DEC field S_DFZ_EX can lead to problems"
                                   "The even-numbered length of the DEC field S_DLZ_EX can lead to problems"
    Checked in SDN, but no answer.
    Need your expert solution, to resolve.
    With Regards,
    Sekhar

    Thank you Des, for immediate response.
    But i have already gone through the Note.
    As we are using ghe standard datasources, can you suggest which option should i use to resolve.
    Solution
    If the field is not manipulated in the customer exit or elsewhere, no
    processing is required.
    If you change the field, the following possible solutions are available:
    1. You can make sure that the number of the characters does not
    increase after the manipulation.
    2. If you can change the extract structure of the DataSource without
    affecting other scenarios (for example, if it was generated in
    transaction RSO2), you can increase the length of the DEC field (or
    CURR, QUAN) there to the next odd character (in the example above:
    from DEC 4 on DEC 5).
    3. If neither of these solutions are possible, you can use a customer
    append that contains a relevant DEC field (or CURR, QUAN) with the
    next highest odd length. This can be used for the result of the
    calculations. This means that you do not have to manipulate the
    previous field.
    With Regards,
    Sekhar

  • Single Check lot two house banks

    Hi All
    We have a requirement where we need to use the same check lot for two house banks.
    For example, check number 102 is printed from house bank 1.
    And i am printign next check from house bank 2, in that case it should generated check number 103
    How can i accomplish this task.
    Any inputs will be rewarded
    Thanks
    Rajesh

    Hi
    Your requirement cannot be met, I suppose.  Cheque lots are created per house bank, account ID and company code.  System only keeps track of the cheque lot numbers (say 001-100).  While creating a cheque lot of another house bank, you can use the same range.  System interprets these as two separate cheque lots.  There is no other identifying criteria for the system to sense from the cheque stationery to distinquish between different banks.  It is for the users to preserve a cheque lot separate for each house bank.  If you use the same cheque lot also, system will keep the track of the cheque number with respect to a particular house bank only.  What I mean to say, if you use the same cheque lot for two house banks, once you print the cheque from one house bank, it reduces that cheque number from the range no matter you are printing it from one house bank or another.

  • Check lot

    Hi,
    We have one check lot of check number 010101 to 015100. But after some months coincidently new check lot has come form same bank with same numbers. System does not allowed to create new check lot for same number. Please suggest how to create.

    The system has checks in place to keep the same check number from being issued twice from the same bank account for a reason - a check number should only be issued once from an account.  Unique check number is one way to safeguard against fraud.  Talk to your auditors.
    You need to destroy the checks with the duplicate numbers and  get new checks with numbers that are not part of a current lot.
    Regards,
    Shannon

  • Is it possible to get the check (cheque) numbers in a DME file

    hi
    Can someone share how to get the check (cheque) numbers in a DME file? Is it possible and if yes, how?
    Raj

    hi
    The trick is to update the payment method in FCHI transaction for the check lot. Then the check number will show up in the xml if it is forming part of the DMEE format.
    Raj.

  • Check Lots

    Now I am using the check lot 5011 which is in sequence but now i created a new check lot 5012 which is also in sequence and i mentioned nxt check lot as 5012 in 5011, i left one check in check lot 5011 and  i updated checks manually from check lot 5012...now my question is if i print the check through f-58( payment with print check) from which lot will it pick the check number...?

    Dear Laxman,
    If you want to use check lot 512 you have to give the 512 lot number in F-58 initial screen itself. Then it will pick from the 512 only. If you give the lot number 511 and still it has checks then it will pick from the 511 lot. Basic thing is you have to give the input check lot number. For e.g--> now you are using lot 511 it has some check numbers in that lot also, but you want to give the check print from lot 512 then you have to maintain 512 lot as input in F-58.
    Regards,
    Dharma Rao. Yekula

  • Error  The even-numbered length of the DEC field LC_SRV_DURATION can lead t

    Hi Guys,
    When I activate or generate Datasource '0CRM_SRV_PROCESS_H' it gives me following warning
    'The even-numbered length of the DEC field LC_SRV_DURATION can lead to problems'.
    Actually , the field LC_SRV_DURATION is type DEC and lenght 10,
    I know this is only waring but still it is not allowing me to activate.
    I have seen some threads regardin this , but none of them have solution .
    Can you please throw some light on this  ?
    Thanks
    Jimmy

    Hi jimmy,
    The reason for the error will be clear for you when you check the following link 
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21f2f2446011d189700000e8322d00/content.htm
    And check your table if you put the even number for the decimal field.
    With regards
    Chandru

  • Error 0x80090318 and lots of other errorsI live in Iran  Yesterday i wanted to use itunes store for windows ; when i have open itunes it gives me the error 0x80090318 .  I have search the wb alot and i have check lots of Iranian and English website but ha

    I live in Iran
    Yesterday I wanted to use iTunes store for windows ; when i have open iTunes it gives me the error 0x80090318 .
    I have search the web alot and i have check lots of Iranian and English website but have not find any solution for
    this problem . Today I have find a software called "Hide my IP" i have opened up that
    when this software was opened , itunes have said "iTunes can't verify the identify of the server "init.itunes.apple.com"".
    then i have click on "continue" then iTunes said "iTunes could not connect to the iTunes Store. An unknown error occurred (310)."
    And theres a matter that i think that have a connection with this topic and thats , that when i want to go to the lots
    of websites like Google Yahoo! Mail and lots of other website my both browser ( FireFox and IE ) will say" This connection is untrusted " .
    I think the solution of my second problem is the solution of my first problem too !

    Tried all the rest on this site did not work for me
    Follow the link below & this one sorted it for me, it was a conflict in programs using Winsock & I got rid of my old program,
    Sorted.
    http://support.apple.com/kb/TS4123
    Tom Ireland

  • Create check lot for cash journal

    I need to create the check lot in order to link this to cash journal.
    Currently we are using the check lot to pay vendors (AP) and the doc
    type KZ is triggered and other payments through GL which gives doc type
    PV.
    Now I will need to create a check lot in order for receiving a check
    into my petty cash through the cash journal.
    Usually, the steps involved is via FCHI, FCH5 and lastly FBZ5.
    How do I ensure that when a check is issued from our bank to cash
    journal and I record this in FBCJ, the doc type triggered is also PV.
    Another problem is that we require the payment advice to be created for
    the check issued via FBZ5.
    Regards.

    Can't it be routed through one time vendor account
    issue a check to one time account & later in FBCJ do a receipt from the same one time account. So you dont have to create a sepreate check lot for cash journal.
    One time account has to be cleared manually.
    You dont have to use check related transaction to create the checks sepreately,
    Hope this solves your issue.
    Revert if not solved in detail.
    Thanks,
    Chandu
    Message was edited by:
            Chandu

Maybe you are looking for

  • Unable to save Sequence value to Database

    Hi, I am trying to pupulate a sequence value so that I can use it as primary key along with the combination of other columns later. My problem is that the sequence value is getting populated on the page with the right value, But is not getting saved

  • Windows XP installation

    I'd like to install Windows XP on my notebook (now i have got Vista). *Eldorado* told me, that if I want to install XP I need to switch SATA mode from *AHCI* to *compatible*. He said that it can be done in BIOS. So, I found it in BIOS, changed and sa

  • White Wall - Photoshop CS6 corrupted files won't zoom

    So my Photoshop CS6 is slowly corrupting files. I open psds to find nothing but a giant whit wall. I zoom out and the white disappears but then I can't zoom in any further than 50%. My rulers however, show that I'm zooming in. Then when I select anot

  • Issue about BI JAVA SDK-SOAP request failed with return message 2147483653

    Dear Experts, I'm trying to use BI JAVA SDK to connect BW by using XMLA connector. But there's an error messaet said : SOAP request failed with return message 2147483653 ( Invalid MDX command with INCLUDING) I'm really new to this JAVA SDK, and after

  • How to find and separate the Erraneous records in Session Method?

    Hi, Currently we are working in SAP-HR.Our programs run using Session  method of BDC.We get data from Legacy System through Flat Files which are in text format.First I upload the data for Actions Infotype 0000 and subsequently the other Infotype data