Check Mark on screen and iPod frozen
My Nano has a check mark on screen along with "OK to disconnect" and it appears to be frozen. Do I reset? If so, how?
Dell Windows XP
The 5 Rs: Reset, Retry, Restart, Reinstall & Restore
Regards
Colin R.
Similar Messages
-
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
i have an issues everytime i put my apple id and password to face time and imessage he said verifying and he goes back to where u should put ur password and wont check mark the mail and i create a new apple id the same what should i do ?
-
when i use my iphone 4, my iphone get a brown screen and is frozen. Who can help me?
If the iPhone is new and you take it apart, kiss the warranty goodbye.
Are you using a case that may be blocking or partially blocking the iPhone's proximity sensor? If you are using a case, remove the case before the next call to see if the same occurs without the case. If not, get another case. -
AHHHH my ipod touch is frozen please help. top half of the screen is completely wont work when i touch it and the bottom half is 90% of the time wont work when i touch it
Have you looked here:
iPhone and iPod touch: Frozen and unresponsive -
I have the iPhone 4S and the wifi was working on it earlier yesterday. I noticed that the wifi didn't kick on last night. It has the network memorized so it could connect automatically. The network name pops up and there's a signal but the spinning circle thing is there and it won't put a check mark by the network name. The wifi will pop up every now and then but only stay for a minute or less. Everyone else's phone and computer is connecting just fine but mine isn't. It won't switch over to WiFi from 4G. I've tried turning off the wifi on my phone. I've tried to forget the network and put in the password numerous of times and I tried to fix it by turning my phone on and off and that still didn't work. I'm hoping that this is a temporary thing but I don't know. What's a good way to fix this because seriously I would like to not use up all of my data for this kind of bull crap. So what's a good way to fix this?
I got the ATV hooked up to the WiFi after manually inputting the DHCP settings.
The ATV will not see iTunes from a PC on the same iTune network. I guess you need an Apple computer for iTunes to connect to the ATV.
The biggest problem is that the iTunes store on the ATV is nonexistent I imagine because of competition/ monopolies in the UAE. If I was in Lao, Burma, Thailand, Mozambique no problem. 40 Countries are listed and non of them are from the Middle East. When I logon to the iTunes store on my PC it too does not allow for me to buy any movies or TV shows. I am not sure why.
As for the iPad OS6, iTunes has an icon and when you click it you get iTune U or Podcast, no video content. The App store works fine and they are always happy to take your money but no video content.
To top it all off YouTube is no longer licensed under OS6.0 and although I can get it on Google Chrome it is by no means as quick (for reasons unknown).
As I said before if I choose United States as my country the ATV hooks up and lets me browse TV and movies and watch trailers but not able to purchase (obviously).
So my conclusion is that ATV will not hook up to the iTune store in the UAE? If this is incorrect please clue me in. -
Changing "Check Shopping Cart" screen and Completion workflow
Hi,
Below i describe a) the current process, b) the required changes, and c) my questions.
Though it is also about workflows i still thought this was the best place to post the thread.
Current process:
In the process "free text order" i choose Go Shopping >> Shop >> Describe Requirement. I fill in details and complete the next steps.
Now the Completion workflow (WS14000044) has started.
So if I now look on my homepage in SRM i have an approval item which reads:
Approval
You can approve or reject shopping carts and read your e-mails relating to the procurement transaction
You have
- 1 Workflow Entries in Inbox
- 0 Unread Documents in Inbox
So i open the list and find one item: Complete shopping cart of mr X.. Now i click on the item and it takes me to "Check Shopping Cart"
At the bottom of the screen is one button: "Change"
Requirements:
1) add two buttons to this screen. One button is "Reject", to reject the shoppping cart directly. The second button "Mail Requester" to send the shopping cart back to the requester and also sends a mail via outlook to inform the requester that this has happened and requesting more information.
2) these buttons should then influence the behaviour of the Completion Workflow. In this workflow (WS14000044) the task Completion (TS14007947) currently has one activated outcome. From my two buttons i would need two more outcomes that allow me to model the other actions that i need i.e. the rejection outcome and the back-to-requester/send-mail outcome.
Questions:
1) is it allowed/possible to add the buttons to the existing screens. Or do i need to create a custom screen and call that instead of the standard screen?
2) is it allowed/possible to modify the completion workflow as described? Or do i need to copy and then modify?
3) How could i make the buttons to interact with the workflow? The only thing i can think of is to create a Z-bus object of the object Form and to modify so that it show my expected outcomes.
4) any helpful links to sdn posts of blogs or otherwise on how to go about to create the necessary changes.
Thx for your input
Kind regards
RobertHi Robert,
Again, before technical solutioning, we need to step back and understand the business process and functions of each role (e.g., Buyer, Financial Approver) in the completion and approval workflow.
Here's my understanding of the as-is (correct me if I am wrong). You are using One-Step Spending Limit WF (10000276) for financial approval. This is done by a Financial Approver (I am guessing, the line manager). The Buyer is not part of the process. Now, you want to introduce free-text requisitioning, and, consequently, you want to introduce the Buyer role into the workflow process - to complete the free-text lines (e.g. with vendor, price).
Based on above scenario, I believe your initial solution was not incorrect - introduce Completion WF (14000044) for the completion task, while keeping 10000276 for financial approval.
Now the business wants the Buyer to play a more active role in the process. They want to be able to Reject (the whole cart?) and Inquire (send the cart back to requester with questions). In my mind, it may still be possible to explore keeping the original design with Completion WF without modifying it, and still achieve the business needs. You can explore different ways of doing that: delete SC items instead of Rejecting, add Approval Comments to inquire, etc.
Alternatively, you can replace all your workflows with one - WS14000133 "Spending limit, n-step,
dynamic approvers (BAdI)". Here, you can determine your approvers flexibly via a BAdI implementation. For example:
1. If Total Amount =< Spending Limit of Purchaser, then no approval agents - auto-approve SC.
2. If Total Amount > Spending Limit of Purchaser AND there're no free-text lines, then determine Financial Approver.
3. If Total Amount > Spending Limit of Purchaser AND there're incomplete free-text lines, then determine Buyer; once free-text lines completed - then Financial Approver.
WS14000133 also has back-and-forth functionality which you can use for the inquiries. WS14000133 provides the most flexibilty, but it also involves more effort to implement. Read up on WS14000133 at help.sap.com.
Bottom line - I would focus on evaluating these two standard options: 14000044 with 10000276, or 14000133. You may need to do some pros/cons, cost/benefit analysis. But I see no need to modify or copy SAP templates in your case.
Cheers,
Serguei
<removed_by_moderator>
Edited by Moderator on May 29, 2009 7:22 PM -
My ipod touch shows itunes in the screen and is frozen how can solve this probleme.thank you
my ipod touch frozen it just shooes i tunes,i dont know how to infreeze it.
thanksthank you for your answer but i already did that,after i see the apple logo it comes again itunes and picture of usb on the screen.
-
i have had my ipod touch 4th gen for 6montha i had to take my first one in becuz of the headphone jack broke off now they handed me a brand new ipod so its still under warrentie but it will shut off on its own with a full charge and home button keeps not responding and got a white screen two days ago i was listeningto aome music earlyer today and the volume rockers would not work im wondering if i should bring it in
Try this to get it working
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
If you get it working, then restore to factory settings/new iPod. If you still have the problem then time for the Genius Bar. -
Updated itunes to v12 and ipod frozen
Today I updated my itunes to version 12 and also updated my Ipod touch to newer OS , i think from 3 to 4 , it took about 90mins to back up and then update , the itunes update seems Ok but at the end of update to Ipod , the update crashed .
The device is now frozen with a frustrating logo of apple and empty bar under. device will not switch off or respond to any touch or home button,, its been like that for 2 hours now.
I looked at other solutions on community , re restore but not possible , but itunes will not recognise the ipod even though i am using apple usb connector , which worked for the itunes v 12 upload.
I am using windows xp , and Norton security systems, i am not sure what the generation model of ipod is but its about 4 years old with 8GB ( with 3GB available)
Considering this is all Apple software/hardware and they have just announced a $140 Billion profit I think we are all being had , but as i have been at this for 5 hours now and am a 68 year old its not surprising.
I tried to use apple support but it just says browser not uptodate , I have internet explorer v 8 , which works fine for other web sites . It maybe suits Apple to avoid supporting in a more positive way and get the community to do their work?
any ideas bar putting a hammer to the ipod? and my brain?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
any help on getting the frozen screen off?
Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
Firefox 4 screen and controls frozen during setup screen. can't do anything
I have e-machine netbook with Windows 7 Starter. When I install Firefox 4, a popup screen asks me to set options for social networking (I think). I can check the options but can't close popup screen. Everything freezes and I must shut down computer.
Try a reset by simultaneously pressing the home and power buttons until the Apple logo appears, then release both buttons. It is a good first step in troubleshooting, since it is easy to do, and will not affect any stored data.
-
My iPod touch 5 has been restarting(red striped screen) and IPods wifi keeps dropping
So every now and then my ipod freezes, before turning off completely, the screen turns mostly red with black stripes. Sometimes i can make out images in the background. It shuts off after about 20 seconds since the red screen appears, then it restarts. Sometimes I'm lucky and it'll let me enjoy Netflix for 40 minutes before restarting. When my ipod constantly restarting is not the issue, my ipod starts dropping my wifi connection, my Xbox and PS3 remain connected so its most likely my ipod, regardless of the distance my ipod and my router. There's days when the wifi disconnects and reconnects within seconds, most days I have to enter settings>wifi and reconnect to my router manually despite it being a known network... Help!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
On previous versions of iTunes it was easy to select songs, albums and/or play lists. How do you do this on the newest version?
The same way you select media and apps in any other version of iTunes to sync.
Either check the songs in question or with the device connected go to the Music/App/Movies/Podcast tab and select the specific content to sync. -
Strobing screen and/or frozen system
Hello All,
I have a 17" MacBook Pro that's about 4 years old. About 6 weeks ago the screen started acting like a strobe light usually the whole system locks up. Occasionally the screen will lock up without the strobe, but that is much less often. Doing a safe boot will clear the problem but it seems to be happening more and more frequently. When it's not strobing everything works perfectly. Here are the things that I've done to try and fix it.
Reseated the RAM
Reset pram
Apple geniuses reinstalled leopard
Apple geniuses did a test to see if the NVIDIA chip had failed
Any suggestions on what I can do to fix this would be greatly appreciated. Thank you, Elena
Here are the error reports from two failures.
Interval Since Last Panic Report: 3187 sec
Panics Since Last Report: 1
Anonymous UUID: 1588B7CE-3821-42D7-AB08-44589
BDDAFFA
Sat Nov 5 13:08:01 2011
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x3644ec1e, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000bc, CR3: 0x01bb1000, CR4: 0x00000660
EAX: 0x35509630, EBX: 0x04c52804, ECX: 0x04cbc800, EDX: 0x00000000
CR2: 0x000000bc, EBP: 0x35509668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x3644ec1e, CS: 0x00000008, DS: 0x04cb0010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x35509408 : 0x12b4c6 (0x45f91c 0x3550943c 0x13355c 0x0)
0x35509458 : 0x1ab0fe (0x469a98 0x3644ec1e 0xe 0x469248)
0x35509538 : 0x1a1713 (0x35509550 0x9 0x35509668 0x3644ec1e)
0x35509548 : 0x3644ec1e (0xe 0x48 0x35500010 0x36480010)
0x35509668 : 0x36456baa (0xc1d00005 0x1000000 0x1000003 0x40)
0x355096c8 : 0x3644928f (0x35509858 0x6 0x0 0x0)
0x35509828 : 0x3643a402 (0x0 0x600d600d 0x7027 0x35509858)
0x355098e8 : 0x3662801b (0xc1d00005 0x1000000 0x1000003 0x40)
0x35509918 : 0x366337ac (0x24a5e000 0x1000000 0x88100090 0x3e)
0x3550b8a8 : 0x3660f189 (0x24a5e000 0x1000000 0x15 0x24a5e01c)
0x3550b9a8 : 0x36435b29 (0x24a5e000 0x0 0x3550bab2 0x80)
0x3550ba08 : 0x3642669d (0x4bf6000 0x0 0x3550bab2 0x80)
0x3550bb38 : 0x36427f44 (0x4bf6000 0x3642b62c 0x3550bbec 0x4)
0x3550bc08 : 0x36412c18 (0x4bf6000 0x1 0x0 0x13)
0x3550bc68 : 0x3640bbe6 (0x4bf6000 0x3550bd2c 0x4a5c5ec 0x4bf6000)
0x3550bc98 : 0x415e83 (0x4bf6000 0x4a5c5ec 0x4a5c5ec 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.4.8)@0x36432000->0x36690fff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x36420000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x2f2c6000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x36403000
com.apple.iokit.IONDRVSupport(1.7.3)@0x36420000->0x3642dfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x2f2c6000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x36403000
com.apple.iokit.IOGraphicsFamily(1.7.3)@0x36403000->0x3641ffff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x2f2c6000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
System uptime in nanoseconds: 549908957973
unloaded kexts:
(none)
loaded kexts:
com.apple.filesystems.autofs 2.0.2 - last loaded 537534276685
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.driver.AppleGraphicsControl 2.8.15
com.apple.nvidia.nv50hal 5.4.8
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.driver.CSRUSBBluetoothHCIController 2.1.9f10
com.apple.driver.CSRHIDTransitionDriver 2.1.9f10
com.apple.driver.AppleUSBTrackpad 1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 158.10.5
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.TMSafetyNet 3
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.8.77
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.NVDAResman 5.4.8
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.driver.AppleSMC 2.3.1d1
com.apple.driver.AppleUSBBluetoothHCIController 2.1.9f10
com.apple.iokit.IOBluetoothFamily 2.1.9f10
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6
Interval Since Last Panic Report: 5959 sec
Panics Since Last Report: 1
Anonymous UUID: 1588B7CE-3821-42D7-AB08-44589BDDAFFA
Sat Nov 5 21:14:47 2011
panic(cpu 0 caller 0x3EB156A4): NVRM[0]: Read Error 0x00001308: BAR0 0x92000000 0x3f149000 0x084700a2 D0 P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x3e9134b8 : 0x12b4c6 (0x45f91c 0x3e9134ec 0x13355c 0x0)
0x3e913508 : 0x3eb156a4 (0x3ed45e80 0x3ed45e80 0x3ed0a6d4 0x0)
0x3e913568 : 0x3edcedf0 (0x3d8ac04 0x4ac4804 0x1308 0x3eb51d06)
0x3e9135a8 : 0x3edf5f85 (0x4ac4804 0x1308 0x3e9135d8 0x2)
0x3e913618 : 0x3edf6298 (0x4ac4804 0x4c69e04 0x3a98 0x0)
0x3e913688 : 0x3ed7e8f0 (0x4ac4804 0x4c69e04 0x3ed7dd0c 0x3e91376c)
0x3e9137f8 : 0x3ede7de3 (0x4ac4804 0x4366004 0x0 0x1)
0x3e913878 : 0x3edbee4f (0x4ac4804 0x48e8a04 0x40 0x3e8)
0x3e913998 : 0x3ec77d26 (0x4ac4804 0x3d3dc04 0x3e913a88 0x3e913a88)
0x3e913ab8 : 0x3ec779e8 (0x4ac4804 0x3d35804 0x0 0x0)
0x3e913b38 : 0x3edb7468 (0x4ac4804 0x3d35804 0x6 0x2)
0x3e913bb8 : 0x3edb8254 (0x4ac4804 0x3d3dc04 0x1000 0x3e913cdc)
0x3e913d38 : 0x3ede93ed (0x4ac4804 0x3d3dc04 0x0 0x0)
0x3e913e88 : 0x3ec6b495 (0x4ac4804 0x48e8a04 0x0 0x0)
0x3e913ed8 : 0x3eb15b60 (0x4ac4804 0x48e8a04 0x0 0x0)
0x3e913f18 : 0x426bfb (0x0 0x4c6d580 0x1 0x19fed4)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.nvidia.nv50hal(5.4.8)@0x3ed5b000->0x3efaefff
dependency: com.apple.NVDAResman(5.4.8)@0x3eafc000
com.apple.NVDAResman(5.4.8)@0x3eafc000->0x3ed5afff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x2e4ba000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x2e509000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x2e49d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
System uptime in nanoseconds: 5153384225670
unloaded kexts:
com.apple.driver.InternalModemSupport 2.4.0 - last unloaded 87018397262
loaded kexts:
com.apple.filesystems.afpfs 9.0.2 - last loaded 341078836112
com.apple.nke.asp_tcp 4.7.1
com.apple.filesystems.smbfs 1.4.6
com.apple.driver.AppleHWSensor 1.9d0
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.iokit.IOBluetoothSerialManager 2.1.9f10
com.apple.driver.DiskImages 199
com.apple.GeForce 5.4.8
com.apple.driver.AppleHDA 1.7.1a2
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.driver.AppleLPC 1.3.1
com.apple.nvidia.nv50hal 5.4.8
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AirPort.Atheros 320.16.2
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.driver.SMCMotionSensor 2.1.1d2
com.apple.driver.AppleIRController 113
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.AppleBacklight 1.6.0
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.CSRUSBBluetoothHCIController 2.1.9f10
com.apple.driver.AppleUSBTrackpad 1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1
com.apple.driver.AppleUSBTCKeyboard 1.7.4f1
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 158.10.5
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.8.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.NVDAResman 5.4.8
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.driver.AppleUSBBluetoothHCIController 2.1.9f10
com.apple.iokit.IOBluetoothFamily 2.1.9f10
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6Same problem going on intermittently for 2-3 days now on 15'' MacBook Pro running 2.4 GHz Intel Core 2 Duo under OS X 10.5.8 (bought January-2008). Here is the panic report:
Wed Nov 16 08:02:32 2011
panic(cpu 1 caller 0x001AB0FE): Kernel trap at 0x00b62c1e, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000bc, CR3: 0x0152f000, CR4: 0x00000660
EAX: 0x5b891630, EBX: 0x0791ac04, ECX: 0x07fc8800, EDX: 0x00000000
CR2: 0x000000bc, EBP: 0x5b891668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b62c1e, CS: 0x00000008, DS: 0x07fc0010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5b891408 : 0x12b4c6 (0x45f91c 0x5b89143c 0x13355c 0x0)
0x5b891458 : 0x1ab0fe (0x469a98 0xb62c1e 0xe 0x469248)
0x5b891538 : 0x1a1713 (0x5b891550 0x9 0x5b891668 0xb62c1e)
0x5b891548 : 0xb62c1e (0xe 0x48 0x5b890010 0xb90010)
0x5b891668 : 0xb6abaa (0xc1d00009 0x1000000 0x1000003 0x40)
0x5b8916c8 : 0xb5d28f (0x5b891858 0x6 0x0 0x0)
0x5b891828 : 0xb4e402 (0x0 0x600d600d 0x7027 0x5b891858)
0x5b8918e8 : 0xd3c01b (0xc1d00009 0x1000000 0x1000003 0x40)
0x5b891918 : 0xd477ac (0x46bf5000 0x1000000 0x88100090 0x3e)
0x5b8938a8 : 0xd23189 (0x46bf5000 0x1000000 0x15 0x46bf501c)
0x5b8939a8 : 0xb49b29 (0x46bf5000 0x0 0x5b893ab2 0x80)
0x5b893a08 : 0xb3e69d (0x74b6400 0x0 0x5b893ab2 0x80)
0x5b893b38 : 0xb3ff44 (0x74b6400 0xb4362c 0x5b893bec 0x4)
0x5b893c08 : 0xad1c18 (0x74b6400 0x1 0x0 0x13)
0x5b893c68 : 0xacabe6 (0x74b6400 0x5b893d2c 0x6c73ee0 0x74b6400)
0x5b893c98 : 0x415e83 (0x74b6400 0x6c73ee0 0x6c73ee0 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.4.8)@0xb46000->0xda4fff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0xb38000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5ce000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0xac2000
com.apple.iokit.IONDRVSupport(1.7.3)@0xb38000->0xb45fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5ce000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0xac2000
com.apple.iokit.IOGraphicsFamily(1.7.3)@0xac2000->0xadefff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5ce000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 29380525312 -
TS3212 Itunes Wont download! and Ipod Help
why wont itunes download on my windows pc, ive tried many times and it just wont download, is somthing wrong or? if anyone knows or has an idea please please help! and my iPod has shut down and wont turn on to the code lock screen and stays frozen at the apple sign screen, can someone please help me out. thanks so much!
can someone please help
Maybe you are looking for
-
I have set up iCloud on my iPad as instructed. When I try to login to iCloud from safari on my iPad I get redirected to set up iCloud on this iPad. How do I solve this? iPad 2, iOS 5.0.1
-
Bridge CS6 and Action Essentials 2 Video Problem
Hello, I am viewing the previews of Action Essentials 2 from Video Copilot and the resolution seems very degraded, tons of artifacts also. This never happened before, and these are just pre-keyed clips for special effects, .mov files. I have include
-
Font size of label element in xml forms
Hi, I am modififying the default xml template sap_app_news xml form in the form bulider. I have added a new label in renered list with the cation as read more . I want that on clicking the read more label the entire news should be displayed . I am a
-
I am getting error in primavera p6
Hi, i am getting error" exception eout of memory in module pm.exe at 00027A32 out of memory" When the time of loading ,it is loading 98% and then it is giving error. I am using a sql Server. kindly any one can help me on this .
-
I am on a new PC, want to update Iphone 3.1.3 to new OS
I am on a new PC, want to update Iphone 3.1.3 to new OS. Can I update the phone via this new PC without losing all the data on the phone. The old PC is backed up and I need to reinstall os (major issues). I have not done this yet, but want to just up