Check material movement types that are activated for transfer to GTS in 4.7 ecc.

Hi
We are using 4.7 Version of R3 and GTS version 10.
Please let me know how to check the list of movement types that are activated for transfer to GTS.
Thanks & Regards
Karthi

Hi Karthi,
Usually your questions are of a technical nature, so I assume the answer for you in this case is table /SAPSLL/TLER3B.  Select where APEVS_R3 = 'MM0C', and either CUSRV_R3, GCUMA_R3 or GRIMA_R3 are not initial.  The result in field BARVS_R3 contains the Movement Type and Movement Indicator (KZBEW) concatenated.
Hope that helps.
Regards,
Dave

Similar Messages

  • What is the industry type & material types that are used in AFS Industry ?

    Hello PP members:
    What is the common industry type & material types that are used in AFS (Apparel Footware Solution) industries
    Thank You

    Hello Seshagiri:
    Thank you for your reply
    In addition what you have mentioned, I would like to add some more inputs ( I came to know after posting the issue)
    I found that
    Material type does not depend upon the industry type.
    Material type defines whether product produced in inhouse or expternal procurement
    (like FERT - Proc Type is X (Inhse), ROH - Proc Type is F (Ext) - MRP 2 View)
    whether stock values are updated or not, due to inventory movements
    Whether material is valuated or not ( most of the material are valuated, but some of the material types
    are not valuated like KMAT (configurable material) & NLAG (Non Stock material)
    What views that are associated with the material type
    For details of material types the tcode is OMS2
    Thank You

  • Amount not turning up for material movement type : 601 from 2lis_03_bf

    Hi all,
    i have loaded the inventory cube from 2lis_03_bx the quantity is turning up for movement type 601 but the amount is not getting reflected it is always blank.
       If   (  SOURCE_FIELDS-BWVORG EQ '000'         "Other Issues
       OR    SOURCE_FIELDS-BWVORG EQ '101'        "Returns / Vendor
       OR   SOURCE_FIELDS-BWVORG EQ '104'         "Material Transfer
       OR  SOURCE_FIELDS-BWVORG EQ '105'          "Stock Adjustment InvD
       OR   SOURCE_FIELDS-BWVORG EQ '106'         "Stock Ajdustment Other
       OR  SOURCE_FIELDS-BWVORG EQ '110' )
       "Issues from stock transfer
       AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
    only movements which are relevant for stock control
       AND SOURCE_FIELDS-BWBREL EQ '1'
       AND SOURCE_FIELDS-BWGEO  <> 0
    SEE OSS NOTE 630254
       AND (  SOURCE_FIELDS-BSTTYP IS INITIAL OR
                   (  SOURCE_FIELDS-BSTTYP CA 'EQ'  AND
                      SOURCE_FIELDS-KZBWS CA 'AM' ) ).
    *IF THE RETURNCODE IS NOTE EQUAL ZERO, THE RESULT WILL NOT BE UPDATED
         RESULT = SOURCE_FIELDS-BWGEO.
    and i can see for other movement type like 641 the amount is turning up.
    Can anyone advise me on this
    thanks

    does the material movement type : 601 will be updated from this data source : 2lis_03_bx nor it is from 2lis_03_um??
    Can anyone advise me on this!!
    thanks

  • Movement type that does not register consumption

    When my client regularly moves material from plant A to plant B and consumes it in the production operaiton at plant B. When they want to move excess inventory BACK from B to A it registers consumption at plant B - and makes it appear that they are consuming more than they actually are. This causes the reorder point for that material to increase and the buyers are given signals to re-order the excess material back to plant B! Is there a movement type that can be used to ship excess inventory back to the original plant, using a stock transfer order, that will not register consumption?
    Thanks,
    Ned

    Hello Nethe, please tell us which is the movement type used to return the goods.
    From a planning point of view it can be seen as a withdrawal of material, but it should be a transfer movement (i.e. 3xx)
    Regards

  • Purchase ledger invoices that are blocked for quality inspection.

    Purchase ledger invoices that are blocked for quality inspection.When invoices are keyed against a stock item that is required to be checked for quality the invoice automatically blocks. Once the check has been carried out and the batch has been released the invoice should automatically release for payment according to terms, however this is not happening.I checked MSC3N,where batch is in unrestricted and status released.Still in material document shows batch in QI.
    Can any one what is the problem.

    Hi
    check in MMBE where the material is lying under the batch .Is it under QI or Unrestricted.
    from QI07 you can put it into Unrestricted or take the UD of lot if generated.
    please revert back
    Regards
    Sujit

  • Material movement types

    dear gurus,
    want to know the relation of material movement types with posting

    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2ba31643ad11d189410000e829fbbd/frameset.htm
    The Movement Type Concept
    What Is a Movement Type?
    When you enter a goods movement in the system, you must enter a movement type to differentiate between the various goods movements. A movement type is a three-digit identification key for a goods movement. The following table contains examples of movement types.
    Goods Movements and Movement Types
    Goods movement                                                          Movement type
    Goods receipt for a purchase order                                101
    Goods issue for a cost center                                          201
    Release from quality inspection stock                              321
    Control Functions of the Movement Type
    The movement type has important control functions in Inventory Management.
    For example, the movement type plays an important role in
    updating of quantity fields
    updating of stock and consumption accounts
    determining which fields are displayed during entry of a document in the system

  • Caution: Info structures S026 and S226 are active for repetitive mfg

    Hi,
    When I run the standard report MCRO - Material Usage Analysis: Repetetive Manufacturing, I am getting the message
    Caution: Info structures S026 and S226 are active for repetitive mfg
    How to overcome this.
    thanks and regards
    muru

    Hi,
    Try Thi - might work.:
    1) Before running the tcode MCRO - (i.e type MCRO in the commond prompt and then do the next steps)
    2) Menu- Got to- User settings
    3) Default your user name will be there.
    4) Now start selecting key figures and charecteristics.
    Save and try to execute.

  • Today's update has helped...here are settings that are working for me...

    So, whatever Apple released today seems to have solved some problems. Finally, my new 80211n base stations are working well -- great speed, two base stations, extending the network, USB printer connected to satellite station, all A-Ok so far. After much experimentation, here are settings that are working for me:
    Radio mode: 80211n (80211a compatible)
    Security: WEP
    IPV6 off
    Choosing 80211n/a compatible makes WEP security an option, and with WEP, speed is good. WPA still slows things down too much for me.
    Good luck to all.

    I've had no problems with WPA. I set my network to "g only" using the alt-key when selecting network type. I turned off NAT, I think that's helped a lot. I've had headache after headache, restarting a few times a day--I had a stable wireless setup with two Expresses for months... I'm hoping this update is going to solve some of those "Where did the Expresses go?" mysteries (restart and they're there again...) Haven't lost iTunes for a few days now, that's a bright spot. I had given up initially on using my external HD for a wireless iTunes repository, with the exception of needing to restart when I wake up or when I come home, iTunes has been trouble free: albums quit cutting out after a few tweaks, and movies and TV shows play straight through now: no further "fade-out-so-iTunes-can-inform-me-it-can't-save-library-do-you-want-me-not-to-r emind-you-again"
    I think the major early element that contributed to iTunes stability was to choose a channel. Then g-only, since I have no n-capable elements, then turning off NAT, which I gather is "newish."
    Like I say, I have high hopes for this update.
    802.11g only
    Security:WPA2
    IPV6off
    IPV4: DHCP

  • Receiving credit for online delivered orders that are pickup for return

    I'm having a frustrating time with online delivered orders that are pickup for return. Items picked up and confirmed via email on 8/8/14...why does it take so long to return to best buy master card. Plus still no replacement gift card or reissue of reward points. I just believe this should be easier.....please correct this. Order number is (removed per forum guidelines)

    Hi Joseph,
    Under normal circumstances, orders placed on BestBuy.com are immediately refunded once they've been returned to one of our U.S. retail stores or to our Findlay returns center. Based on your order number though, am I correct in understanding that you originally placed your order through your local store? If so, then this may explain why you haven't seen a refund yet -- in-store orders often require that customers physically visit the purchase location to finalize the return.
    I'd be glad to point you in the right direction, so please make sure to check your private messages when you can. To check your PMs, simply sign into the forum and then click on the letter icon in the upper right-hand corner of the page.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • What are the essential services that are required for ensuring server is healthy up ?

    Hi All,
    Please advise me What are the essential services that are required for ensuring server is healthy up ?
    Warm regards,
    jk1510

    The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
    There are a few ways to find this in Windows Server 2008.
    First click “Start” and type “Generate a system health report”
    Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
    The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
    Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
    BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
    Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
    health report”.
    Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
    Exchange Queries

  • Mac Mail v. 7.1 (1827) spell checker makes spelling suggestions that are MISSPELLED!

    I haven't been able to find this anywhere on the web so far, so thought I would post it here. 
    I am running Mavericks (v10.9.1) on a Mac Book Pro 17" (Early 2011).  
    When typing in Mac Mail (or Pages, etc.), my auto-spell check frequently makes suggestions that are misspelled.  For example, I typed "availabillty", and the auto-checker suggested "AVAILABILTY"(!?!).  The correct spelling, of course, being AVAILABILITY. 
    This has happened several times before, and I just didn't document any of the other misspellings.  I will add others, if that makes a difference. 
    I've tried to find access to the library to make corrections to the internal misspellings, but cannot seem to find and assuming not accessible?? 
    Please help!  This is an incredibly annoying problem, making the spell-checking functionality essentially worthless having to stop and "spell-check the spell-checker" everytime.

    Pedro,
    Thanks, I apprecaite the info, but you did not address my question.  The links you provided just explained the basics of spell-checking and how to do things like "learn new words".  The do not provide any "information regarding what I'm trying to accomplish". 
    Perhaps I didn't explain my problem clearly enough:  My problem is there are INCORRECT suggestions being made by the Apple spell-checker (or whatever library it's using).  In other words, I'm spelling a word correctly, and the auto-spell-checker is suggesting incorrect spellings to my correctly spelled word.     
    What I'm trying to accomplish is getting misspelled words out of the auto-correction library (and also figure out how they got in there in the first place).  Is there a way to edit the existing words in the spell-checking library (not just adding new ones, as the link you provided pointed out).
    Thanks,
    Dan

  • HT1751 how do i move songs that are in separate albums into the same album?

    how do i move songs that are in separate albums into the same album?

    Of course it should, but if it doesn't do you want fix it or leave it broken? iTunes draws on the CDDB database for track details. That database is incomplete, contains errors, and isn't explicitly designed to be "iTunes friendly". If you download an album from the iTunes store then the tracks should normally be grouped together, although there are ways of sorting the Songs view that will always break things up. If you purchase from Amazon, elsewhere, or rip your CDs then you may sometimes need to make a minor update to the tags to tidy things up. Which workaroud is needed depends on context, but the most common one of setting an Album Artist takes a few seconds.
    tt2

  • List of GL accounts that are Open for manual postings

    Hi,
    I am trying to download a list of all the GL accounts that are open for manual postings.  Meaning in FS00 the check box "Post Automatically Only" is not ticked.  Also I would like the list to include the Field status group associated with the GL account.  Does anyone know how i can find this?  I looked through the tables SKA1, SKAT and did not find it there.  When I get the technical information for the account, it says Structure "GLACCOUNT_SCREEN_CCODE" and field "XINTB."  Any ideas?
    Thanks,
    Rashad

    Hi,
    Post automatically only and FSG are company code specific. so you should be checking that in relevant table SKB1 which has companycode specific details.
    Regards
    Shivappriya

  • Disabling all movie clips that are on lower levels

    Hello
    I have a movie clip that pops up over all other movie clips.
    But it is still possible to interact with these movie clips that
    are beneath the mc that has popped up. Is there any way to disable
    all of the movie clips that are beneath the one that popped up?
    thanks

    Typically the way to do this is simply create a large
    invisible MovieClip which covers everything, and give it a an
    interactive event. I often use:
    on(rollOver){
    useHandCursor = false;
    This way not only does it steal interaction from anything
    below it, it makes it so the cursor doesn't turn into a hand making
    the user think there's something clickable.
    You could also make a loop which checks getDepth() and if
    it's below a specified depth, set enabled = false, but there's
    really no reason in doing that.

  • WM movement type 255 not allowed for warehouse number 008

    Hi,
    Error message "WM movement type 255 not allowed for warehouse number 008" pops up during creation of outbound delivery. I checked the schedule line for this sales order, it was actually tagged to movement type 631 instead of 255. There ain't any movement type 255 at all. How to solve this?
    Thanks.

    Hi,
    Check in Customizing for Define Movement Types where for the given warehouse number movement type 255 is assigned.
    Path is,
    Logistics Execution - Activities - Transfers - Define Movement Types.
    Check for 008 Movement 255 is assigned or not.
    Thanks
    Krishna.

Maybe you are looking for