Check / monitor use of groupwise

Hi There,
We have the following problem. We have a Groupwise 7.0.2 system on a NW 6.5
Server with 268 users on it. We think that some people (about 80?) never
use groupwise. Is there a way to list the last time/date that all users have
used groupwise?
Thanks,
Marcel de Jager

Marcel,
run an audit report on the PO.
Uwe
Novell Support Connection Volunteer SysOp
Please don't send me support related e-mail unless I ask you to do so.

Similar Messages

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

How to mirror to tv monitor using macbook pro 2012

how to mirror to tv monitor using macbook pro 2012. The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

Howdy there nell a-7,
It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Try these steps first
Verify that your iOS device's software is up to date.
Verify your Apple TV's software is up to date.
Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
All AirPlay-enabled devices must be connected to the same Wi-Fi network.
Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices.
Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Here is some additional information about Airplay for Mac:
About AirPlay Mirroring in OS X
http://support.apple.com/kb/HT5404
Thank you for using Apple Support Communities.
All the best,
Sterling

Availability monitoring using CCMSPING..

Hai,
Iam facing problem in Availability monitoring using CCMSPING. CCMSPING is installed on CEN system which is a SOLUTION MANAGER system with SAP_BASIS - Release 702 and Level - 0002. (SAP EHP 1 for SAP NetWeaver 7.0)
We have 4 Production systems in the landscape out of which 2 systems are not reporting the data in RZ20 in CEN under 'Availability Monitoring' MTE. I got the below error when I tried to Test ping the connection for the faulty servers in RZ21 in CEN.
Error:
CCMSPING communication error: Cannot access message server
Also I got the below pasted errors from dev_ccmsping from the CCMSPING working directory.
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
ERROR => Error response: 404 - expected: 200 [csmhttp_mt.c 465]
I have checked the /etc/services files as well but no luck. Please help me with suggestions.
Thanks in advance.
Regards,
Yoganand.V
System details:
Kernel release: 701
Operating System: Linux 2.6
OP release: 2.6.5-7.282-smp
Database system: ORACLE
Release: 10.2.0.4.0
Machine type: x86_64

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

HELP needed creating a Network Monitor using JSNMP

I would really appreciate if anyone could help me. I'm currently TRYING to develop my final year college project- A network monitor using JSNMP. I don't know how to go about pinging a device using this. Can anyone help me pleez?

Did you try to build and run their examples? Check out the example called SNMPV*TrapSenderTest where * is the SNMP version you want to use.

HDTV as external monitor using ethernet connection

Hello,
I want to connect my HDTV to my iMac and use it as an external monitor.
My HDTV is about 25 ft away from my iMac.
A HDMI cable of that length cost over 200 $.
So, its not an option to me.
I just bought a smart rooter but my HDTV Panasonic Viera P50GT30 is not a smart TV.
It needs a DLNA server and I can't find one.
Question : Is there a way to use my HDTV as an external monitor using the Ethernet or Wifi connection?
Thank's,
Pierre.

This look's good.
http://www.startech.com/AV/Extenders/HDMI/HDMI-over-IP-Extender-with-Audio~IPUSB 2HD2
But its not.
OS Compatibility Windows® XP(32bit)/ Vista(32/64bit)/ 7(32/64bit) Aero themes supported

Can you hook up a monitor using hdmi?

Hi I am using a Cintiqi Display and would like to add another monitor using the other port HDMI is that possible or do I need to do something else. I just wanted another display to watch videos to learn how to do some Adobe products and thought it be easier to watch it on a monitor while I work on the products ...kind of step by step process.
thanks for any help Maggie

Not all or even many monitors have HDMI ports but it does have one yes it can be connected. You can also use a HDMI to DVI adapter, in fact Apple include such an adapter in the Mac mini box.
There is one issue you need to consider though, the Mac mini only supports a maximum resolution of 1920x1200 pixels on the HDMI port. If you monitor has a higher resolution then this may not be the best solution.
Your other alternative is to get a USB Displaylink adapter to allow connecting a monitor via USB.

How do you get your tv to act as a monitor using apple tv?

Can you get your television to act as a monitor using Apple TV?

I presume you mean you want to view your computer screen on your TV by going through the Apple TV. Right now you can't do that but the next version of Mac OS X, 10.8 Mountain Lion, will allow Mac computers to mirror their computer screen on a TV connected to Apple TV.

External monitor using separate menu bars

I got an external monitor plugged in. Is it possible to run separate menu bars on each monitor? Menu bars corresponding to the applications on each monitor?

Only the foremost application's menus are visible on the menu bar. The foremost application will span both monitors.
It's not possible to have two different applications both active on different monitors.
You can however duplicate the menu bar of the foremost application on the second monitor using shareware programs. Try MenuEverywhere if that's what you wanting to do.

Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor using miniDisplay port?

Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor, using miniDisplay port?
For example, Mac mini <--> external SSD <--> apple cinema display 30" (using miniDisplay port adaptor plugged into the SSD's second thunderbolt port)

TechnoMax wrote:
for instance STAE122 or STAE 127?
FWIW, STAE129 is the current version TB adapter
that is self powered and has TB daisy chain port.
STAE122 and STAE127 are older versions and
not the current model, though there may be stock of
these around. As to whether this will solve your issue,
I don't know.
Can I trick the Mac under Bootcamp as OS to use HDMI for the monitor? Dell officially says that the monitor can only accept 1900x1080 over HDMI, but some have fiddled wth different computers with custom settings that worked with some Monitors but mostly under Linux and to Dell 2711.
The MacMini HDMI port is hardware limited to 1980x1200.

Add and Remove Publishers from Replication Monitor using T SQL

Is there any possibility to add an Publishers from Replication Monitor using T SQL.i am trying to configure the replication using T SQL..i can create all other steps but didn't find any way to add publisher to the replication monitor..kindly suggest..

Hi Snehasis,
Tom is correct, there is no T-SQL command to add a publisher to Replication Monitor. However, the server from which you launch Replication Monitor will automatically be added to Replication Monitor if it is a Publisher. Also, you can add additional
Publishers using the Add Publisher dialog.
This is covered in
Add and Remove Publishers from Replication Monitor
Brandon Williams (blog |
linkedin)

Regd. error in sender agreement(when to check sender uses virtual receiver)

hi Experts,
I am doing a file( SFTP adapter ) to IDOC scenario.
I got an error :
Couldn't retrieve inbound binding for the given P/S/A values:FP=XYZ;TP=;FS=XXXX;TS=XXXX;AN=XXXXXX;ANS=;
I checked my sender agreement and saw some "*" symbol displayed at the end on SA name.
To quick fix it and remove the star symbol'', i have just created SAgreement again and this time i checked "Sender uses virtual receiver " and revomved thestar symbol '' and saved without mentioning anything there.
When i tested it worked! but i want to know what made it work, is it the right practice.
i did a lilttle search on when to use "sender uses virtual receiver" option.i came to an understanding that it is mainly used to handle multiple input file formats in a single configuration scenario.
one more qns:
What are marketplace adapters,is this error comes when we use adapters which are not inbuilt or bought from external vender.
Regards,
Anika
Edited by: Anika Gulati on Jun 10, 2009 1:23 PM

Here are few ways for it...
SAP Process Integration: When to Use u201CSender Uses Virtual Receiveru201D in a Sender Agreement
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40cb67f7-6464-2b10-bcb9-8edb9a3569f9
SAP Network Blog: Virtual Receiver - Why do you 'really' need it?
/people/shabarish.vijayakumar/blog/2008/09/16/virtual-receiver--why-do-you-really-need-it
-SM

Idoc monitoring using WE06

Hi all,
I want to do Idoc monitoring using the tool Active Idoc Monitoring(Programm: RSEIDOCA;Transaction : WE06).
So when ever something goes wrong in an Idoc,depending on the idoc type ,I want to inform the concerned person by email using SAP mail( Business Workplace).
My questions are with regard to the 2 possibilities(I thought) stated below for achieving this.
[1]
Is it possible to directly send an email to the SAP mail inbox of the concerned person,using this program depending on the Idoc type and other conditions if they exists .Because depending on the idoc type different users need to be informed of the error.
I made a variant as said below in the link.
http://help.sap.com/saphelp_470/helpdata/En/dc/6b81b943d711d1893e0000e8323c4f/frameset.htm
Is it possible to test this case immediately by sending a error ORDERS Idoc.If yes,How?
Is the configuration said in the above link sufficient or Is there any need to make any further changes.
OR
[2]
Using transaction WE06,I want to the send the email to my sap mailBox and from there forward it to other users depending on the conditions said above.
How could I achieve it? Test it immediately
I would like to go forward with this 2nd solution,if thats better and easily configurable.
How to configure this scenario.
Any help is greatly appreciated.
Regards
K

Closing this thread.Moving it to a more appropriate forum.

Hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

thanks, guys mirror on/off didn't make a difference and there were no resolution options with the cable. switched to a VGA adaptor and all is working great now! cheers

Dual monitor use on iMac 24"

Can I hook up another monitor to the iMac for dual monitor use. Looks like it
can be done looking through the post, just want to make sure.
Thanks

Yes you will need this cable.
http://store.apple.com/us/product/M9321G/B?fnode=MTY1NDA3Ng&mco=MTUzNTQ

Check / monitor use of groupwise

Similar Messages

Maybe you are looking for