Check number field is not appear in layout varient FBL1N (Ecc 6.0)

Dear Experts,
In FBL1N I am unable to view the field Check Number and Payment date in the hidden layout varient.
How to configure?
This problem is coming only in ECC 6.
Please help.
Regards
Uttam
Edited by: Uttam Agarwala on Aug 20, 2010 11:49 PM

Please help.
Payment date issue has been solved. Insteed of Payment date I have considered "Net Due date"
My second requirment is Check field in FBL1N.
I have added table "PAYR" and field "CHECF" in (TC: O7R3), and the field is getting display in Layout.
Also I have run the program "RFPOSXEXTEND" through SE38 and activated the extended structure.
Afterthat I have changed the layout and added the field as per my requirement but still the data is not available in the field "CHECF".
In FBL1N after selecting the vendor and clearing items when I excute the field is blank but when go to change layout and click "copy" and save the layout the data gets updated in the field but when again I refresh the section the data disapears.
Please guide how to resolve this issue.
Regards
Uttam.

Similar Messages

Supplying Plant field is not appearing in vendor creation of receving plant

Dear Friends,
Iam configuring Cross Company Scenario to my client for the version SAP 4.6C as they implemented a new company code and want to transport the material from one company code to another company code.
I made all the required customizations in the system
while creation a vendor code in the reciving plant in Pur.Org.Data screen->Extras--> Add.Pur.data i am unbale to view plant field where we maintail supplying plant
In OMSG at purchasing data at add purchasing data PLANT, vsr relevacne & plant relevance made optiional
but while creation of vedor code the other two VSR relevance and Plant relevance indicators are populating but the PLANT field is not appearing.
without this assignment while creating a STO, shipping data tab is not appearing
Please Provide me input in solving this error.
Thanks inadvance
Regards
Srini

Dear Srini Behara
The field selection is controled at Vendor accounting group.
For Vendor account group (std 0001) , the field Plant in additional Pur data is supressed whereas for accounting group 0007 this field is activated.
Please rfer the following path to activate the field
SPRO--> Financial accounting --> Account receible and Payable --> vendor accounts --> Master data --> Prepataions for creating vendor master data --> Define account groups with screen layout
Select the Vendor account group and go to Purchase org data and change the Plant filed option.
Or create teh Vendor under accounting group Plant (0007 std)
warm regards
Ramakrishna

Tax Code and Tax Amount Fields are not appearing

Hi to all,
While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
for more clarity...
suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
But in F-47 screen Tax Code and Tax Amount fields are not appearing.
Could any body help me on this??
Thanks in Advance
Regards,
Schilukuri

why you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
Even if you find the tax code field and check the tax code check box, system will not calculate tax at the time of down payment or down payment request.
Please remember that by default standard SAP provides the tax code field in f-47 or F-48.

Check number field coming in blank

I am new to this forum, and I am searching but canu2019t find a solution.
I have a database, which contains a field called u201CCheck Nou201D, which contains the check numbers as well as type of payment received from a contributor.
So, if the contributor paid which a check, then the check number is there, but if they paid by money order, pay pal or cash, then those terms are there.
The problems is when I bring the data into CR, it is only bringing over the check numbers, as number.
Now, I wrote a formula to convert the numbers to text, but it still is not reading the literal data, u201Cmoney order, pay pal or cashu201D.
The formula that I wrote is:
If {2009.CHECK_NO} = 0.00 Then
"*CASH*"
Else
ToText ({2009.CHECK_NO},0,"")
and believe, it or it works, u2018cause the check numbers come in great.
I called tech support up and they told me something about marking the field as u201Calphanumericu201D, and to look to the forum for a solution, or else pay $195 per incident for tech support.
I figure this must be a common occurrence, u2018cause all organizations maintain some type of check register, and there are times, now a days when pays with something other than a check, e.g. wire transfer, debit card, etc.., and if that literal text is in the check number field, Iu2019d like to bring it over as such.
Thx in advance for answering my question.

Here is the formula I have in my CR report:
ToText ({Sheet1_.F3},0,"")
and here is the result I get:
Check No
4204
6008
448
2079
13495
1216
369
320
2227
231
139
351
524
1562
402
5098
1109
2240
922
Where the blank lines are records containing text entries in that field, such as "cash, credit card, paypal".
My problem is that no matter what I'm trying, the numbers come across fine, but now the literal text isn't.
I've tried some variation of the formula as follows:
If IsNull({Sheet1_.F3}) then "" ELSE
if not(Isnumeric({Sheet1_.F3})) then ({Sheet1_.F3}) else 1
As a suggestion from the board, but when I check for errors, I get various errors such as "string needed" or something else.
I'm getting lost on this.
And, I'm sure it is something simple, but I just can't grasp it from the manual or help screen.
Please help!!

FI Check , check number field

hie gurus , i need your assistance with a field i'm having a problem with for the check number. in my form its showing the last check printed and not the current check. if i look in the table PCEC its at the current check number. does anyone know any other reference for check number field, or how i can go about solving this problem. tried clearing it from the form, still nothing.

Hi Deniel,
Check Number you can get it fin payr table with reference of Document number.
Regards,
Syed Tayab Shah

Custom fields are not appearing in BP

Hi Friends,
My requirement is to add a new fields in Business partner(TCode:BP). For this I have created a new tab using Business data tool set by following every step. I have regenerated the screens also(using Tcode:BUSP). But after executing the transaction I am able to see the tab but not the fields. Fields are not appearing in the tab. What might be the reason?? Kindly clarify me.
Regards,
Steve

Hi,
For this purposr you have to use EEWB enhancements to add field to your new tab page.
Regards,
Amol Tambe.
SAP CRM Technical Consultant.

Profit center field is not appearing while posting of customer invoice and

Hi,
profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
Can anybody tell what are all new gl Reporting list of transaction codes

Hi,
In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
Thanks,
padmaja

Tax classification fields are not appeared in master data

Dear Experts,
I searched the forum about my issue but i did not get any solution.
I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
FYI
I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
EX:
AT MWST
DE MWST
But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
Note:Country of plant,company code and sales organizations is IN
Help me to view tax classification fields in Master data.
Thanks&Regards
Ravikumar.R

Then how system knows this customer is liable for JLST.
In customer master, under the Taxes tab, it would be like
Country::::Name:::::Tax Cat.::::Description::::Tax Classification
While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically. You just have to input tax classification as 1, 2 etc.,
Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
G. Lakshmipathi
ps: please spell the name correctly

Substitutions - field does not appear in list of 'substitutable fields'

Specifically, I would like to use a exit substitution to replace the content of the Structure PRPS-POSID field.
However, I cannot seem to use a simple substitution rule (since PRPS-POSID does not appear as a substitutable field in the PRPS list of fields that pops up when creating a 'Step'). Most of the PRPS field are availed as 'substitutable fields' but not POSID.
The user exit approach is proving difficult since I cannot add the following code unless I put in a data or tables statement (which is NOT recommended).
If proj-PSPID(7) <> prps-POSID(7) .
prps-posiD(7) = PROJ-PSPID(7) .
ENDIF.
Please help!

Hello Shrikant;
The requirement is to ensure that the WBS element numbering (prps-posid(7) ) will always match that of the Project Definition (proj-pspid(7) ). This numbering rule is required to comply with the Fund Centre numbering since the fund center number utilizes the Project Definition number as an identifier ( I will email you some screen prints).
If there is a discrepency between the WBS element numbering (prps-posid(7) ) and the Project Definition (proj-pspid(7) ) number, the requirement is to assign Project Definition (proj-pspid(7) to the WBS element numbering (prps-posid(7) . The transaction used to call the substitution exit is CJ20N.
A big thanks for your comments so far.
Peter Forster.

Acrobat X Pro Drop-down Fields Do Not Appear on Adobe Reader for iPad. Help!

Hello,
I am having a problem getting drop-down fields to appear on Adobe Reader for iPad. Basically, I need to create a form that includes drop-down fields, with the end result being a form that can be viewed and completed on an iPad, using the Adobe Reader app. Above all else, the end result needs to be viewable on an iPad.
I created a form using Acrobat X Pro within which drop-down fields work flawlessly. However, when I try to open this form on an iPad, the drop-down fields do not even appear. I have done some investigating on the Web (including these forums) and come to understand that this has to do with javascript limitations on Apple products, but have yet to discover a solution to my problem.
To summarize: does anyone know how to make drop-down fields appear in Abobe Reader for iPad app? Or, does anyone know a workaround in which I could have a drop-down menu (or something similar) in my form and have it work on Adobe Reader for iPad?
Thanks in advance for the help. I took on this project from my boss' boss, so I'd really like to get this done for him.

Hello GKaiseril,
Thanks for the reply. I experienced the issue running the most recent version of the Adobe Mobile Reader app. I'm not sure I can convince the client to use anything else, but its worth a shot.
All I need is a simple drop-down list (multiple fields in the document) with 4 options that the user can select and submit as a form. Is this something EZ Pdf reader can do? Also, is EZ Pdf Reader free? (the reason I ask is I am an Android user and do not readily have access to a iPad).
Thanks again.

Fields are not appearing in the configuration

HI All,
I created new view in the BP_HEAD component and view type is table view. In that view i created model context node and it is referring to BuilHeader bol object. these context node fields are not showing in the configuration tab. if i expand my context node folder in the configuartion , it is shoiwng empty. I am facing this problem.I changed view type table to form also it is not working.Could you help me any one .
i

Hi venky
Check the generation of the context node class , check its super class it should be CL_BSP_WD_CONTEXT_NODE_TV, and your view code must support the configuration. check the below view code snippet for table
here replace the partner with your view variable which represents the controller class context node
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<%
DATA: lv_xml               TYPE string,
lv_visible_row_count TYPE string.
lv_xml = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
%>
<chtmlb:configTable xml                   = "<%= lv_xml %>"
                    id                    = "ResultTable"
                    navigationMode        = "BYPAGE"
                    onRowSelection        = "Select "
                    selectionMode         = "<%= PARTNER->selection_mode %>"
                    table                 = "//PARTNER/Table"
                    usage                 = "SEARCHRESULT"
                    visibleRowCount       = "10"
                    width                 = "100%"
                    actionsMaxInRow       = "6"
                    selectedRowIndex      = "<%= PARTNER->selected_index %>"
                    selectedRowIndexTable = "<%= PARTNER->selection_tab %>" />
The generated method GET_TABLE_LINE_SAMPLE must refer to BOL structure that you refered
say for example if you are creating table for BuilHeader the generated code should contain the structure CRMST_HEADER_OBJECT_BUIL. (sample code snippet is given below)
    TYPES: BEGIN OF line.
    include type CRMST_HEADER_OBJECT_BUIL.
    TYPES:
           END OF line.
    CREATE DATA rv_sample TYPE line.
Thanks & Regards
Raj

Calculated Field formula not appearing in Power View Field List panel

Hi,
On Power View1 sheet of this
workbook, the two PowerPivot calculated Field formulas (First Visit and First date of FY) are not appearing in the Power View Fields panel on the right hand side.
I want to drag client and First Visit (calculated Field) to the Power View.
Why is this happening?
Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

I found a workaround for it - I was having the same problem as you. I wanted to display the last refresh date of my data, but Power View wouldn't display a date resulting from the [Last Refresh]=MAX(Date[Date]) formula.
HOWEVER, a Pivot Table can handle that Calculated field just fine. So I renamed my measure "Refreshed Date" and added another tab in the Excel Sheet. I added a Pivot Table from PowerPivot into cell A1 and the only thing I put was that single
measure (A2). To the right of that, I did =A2 and created an Excel Data Table. The title of that was "Last Refresh". Now, I could add that Data Table to the PowerPivot Model and into Power View. And then I hid that tab.
The only downside to this method, is that if you're refreshing single tables at a time, you have to remember to refresh the Pivot Table when new data is added AND update the data in the model. I'm only connecting to one database, so I just choose
"Refresh All" in Excel and it updates everything. It works perfectly! :)
Well shoot, I even took a screenshot that helped explain everything, but it won't let me post it because my account isn't verified and it won't tell me how. If you have any questions, please let me know and I'll clarify!

Check Number Field AP?

Hai guys,
I need to find out which field in Accounts Payable cube relates to Check Number ( Vendor paying by checques ).
Can anybody help me out?
Thanks.

Sorry, Checques - its vendor who is paid by checques.

Check Number field in FBL3N

Guys,
Do we have any option to include check number in FBL3N. When I take the display of my main cash account in FBL3N, I need to see the check number as well to figure out if there are more than 1 checks with the same amount.i.e: If there are 2,3 checks of 20,000 each are there in the list.I like to see the check number asociate with those line items.Is it any way or we need to modify the table.Thanks
Iqtidar

Hi Iqtidar,
I don't have a straight forward answer for your query.
You can think of using Substitution, with an User Exit, that can be used to populate the check number in one of the unused BSEG fields
But, there is a simple workaround.
You can create an query (SQ01) with Info set built on PAYR table.
In the selection screen user
PAYR-UBHKT ( GL a/c No for our bank a/c / bank sub-a/c)
along with other selection parameters like
PAYR-ZBUKR (Paying company code)
PAYR-HBKID (House Bank)..........
Let me know if this is helpful.
Thanks
Kalyan

Field Headinds for some Z fields does not appear in SE16n

For some custom defined fields, headings does not appear if we use transaction SE16n. But that appears if SE16.
Please reply if you got similar issue.
Thanks
Manish

Hello Manish,
This is because all the the custom fields those are not created with reference to a data element won't display the filed names in Se16n.
So if you want you can make your custom field of the append structue to refer a data element.
Thanks,
Greetson

Check number field is not appear in layout varient FBL1N (Ecc 6.0)

Similar Messages

Maybe you are looking for