Check old value of MM42 characterisitcs Tab after change

Hi Guru,
is there any way to Check old value of MM42 characteristics Tab after change?
i had tried using CDHDR & CDPOS table to check any updates in MM42, but it only store the date of update, not the actual value/old value of i changed.
Regards,
Howard

any idea?

Similar Messages

Why substitution strings are keeping old value in translated application even after seed/publish?

Hi,
Recently I have notice a small but from the point of view of our customer "big" issue. We have defined in our application some substitution strings to keep more detailed information about the version of the application. They are later used in page templates to show mentioned info to the end users. Recently I had to update value of one of the substitution strings. The change is immediately visible in main application. Unfortunately it is not the case for the translated application. For some reason old value is kept. Even after doing "Seed" -> "Apply translation file" -> "Publish". It is still preserving the old value. I have tried to use "Translatable" checkbox in the template. In the translation file it is showing properly substitution string in the "source" and "target" tags but still it is resolved to the old value.
We are using APEX 4.2.2.00.11 running on 11g.
Waiting for any suggestions as maybe it is me forgetting about ticking somewhere additional "checkbox". Thank you in advance.
Greetings,
kempiak

It was my mistake. Value of the substitution string is included in the translation file. I have changed it there and it works perfectly.
Greetings,
kempiak

How to check old value in form personalization.

Hi All,
Could anybody please tell me how to check the old value in oracle forms using form personalization if someone is updating to someother value.
For example.
My Vendor Site Alternate name is XYZ
and someone has changed it to ABC, How could i check the old values before or after doing updates.
I don't want to write trigger for this.
Thanks & Regards,
Vishwas

Pl see if the solution in this thread can help - Re: Capture who changed data using Forms Personalization & changed to what
If not, pl see old threads that discuss forms personalization
http://forums.oracle.com/forums/search.jspa?threadID=&q=forms+AND+personalization&objID=c3&dateRange=last90days&userID=&numResults=15
HTH
Srini

How to delete old schedule time of process chain after changing

I am try to change the schedule time of process chain on production but after changed the old schedule is still working (i.e. every day on 7 am I want change it to 6 am only) ,one process scheduled two time.
I want only last changed. How to remove the older one?
Thanks

hmm wierd...one more thing check if this process chain get trigger by anyother process chain by some abap program or any.
Check the table rspcchain to know if it has any meta chain or not. IF not follow the below steps :
make your process chain trigger based upon the event. Follow the below step.
1.SM64 ---> Create event -
> come to your process chain -> maintain the start variant -> event base---> give that event name here.Now we will be require to create the job which will trigger this event for this.
2.Let us take the below PC as example;
ZL_TD_HCM_004 -- This PC is running after event u2018START_ZL_TD_HCM_004u2019
3.Go to T Code: SM36 Here we define the Background job which will be available in SM37 after saving it.
4.It will ask for ABAP Program to be entered. Give it as Z_START_BI_EVENT and Select Variant from the list. (Based on Process chain, you can select it)
5.Then select Start Conditions and give the start time of process chain. and select periodicity.
6.Save the newly created job in SM36.It will be now available in SM37.
This should solve your problem now .. have fingure crossed
Thanks,
Deepak
Edited by: Deepak Machal on Dec 14, 2011 8:20 AM

Can't open bookmarks in a new tab after changing "browser.tabsinsertRelatedAfterCurrent" - even after changing it back.

I changed "browser.tabsinsertRelatedAfterCurrent" in about:config, and then changed it back after it didn't do what I had hoped it would do. The next time I tried to open a bookmark '''from the menu''' (not the little bookmarks button thing), nothing happens when I select "Open in a New Tab."
EDIT:
Bah, I couldn't take it and just did a restore.

see Tabs configuration, extracted from About:config entries
* http://www.mvps.org/dmcritchie/firefox/tabs_config.htm
and check out (remove spaces)
*browser.tabs.loadBookmarksInBackground
*browser.tabs.loadInBackground
*browser.search.openintab
More information on Tabs
Tabs configuration, extracted from About:config entries - MozillaZine Knowledge Base
*http://dmcritchie.mvps.org/firefox/tabs_config.htm
Tabbed Browsing in Firefox
*http://dmcritchie.mvps.org/firefox/tabs.htm
001 Tab Capacity Test
*http://dmcritchie.mvps.org/firefox/tab_capacity/001_with_underscore.htm##

I can't enter any value in the Text field, after loading flash files

Hi to all,
In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
This problem happens after change the jre version from 1.6 to 1.7.
I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

Updating a row is not reflected after committing and it takes the old value

Sir,
I have been stuck at this problem for quite some time. So, I have a updatable table with editall property but i am controlling each column's read only property based on the value of the checkbox present in that table.So, if the user clicks on the checkbox ,the entire row becomes editable. But when i am changing the value of the row and pressing the commit button , it does not take the new value but the postback happens with the old value only. If i just drag the table as editall table and edit something , the commit button does reflect the change.
How to solve this. Please help

Frank,
The reason i am not using the ClicktoEdit feature is because my aim is that the user clicks on multiple checkbox and then press the update button ,then all the checked rows becomes editable and the user can update them. But unfortunately, this feature is also not working .I am going step by step. So, i have checkboxes which the user can click to update them but it is not committing the change. Could u please help me or suggest some other way round. If u want any other information , please do ask.
Thanks

I am getting old values after changind the data in CRM ISA B2B.

Hi,
I am modifying Standard CRM ISA B2B application. Under "My Account" section. there are two options 1) Password change and 2) Address Change.
I changed "addresschange.jsp" for Look and feel. I also changed Telephone and Fax input filed by braking them into three input field and made Standard telephone and fax field to hidden. Through Java script I am taking value from Standard file and braking them into 3 part and then display in appropriate field also while saving the record I am taking value from three input fields and assigned to standard field before saving the changes.
When I click on Submit button after making changes to name, phone or any field I am getting success message that your record has been updated successfully but when I revisit it I am getting the old values.
pl. guide me How I can resolve this issue?
Thanks.
Ashish Patel.

Hi Gareth
My understanding is that you want to store some extra attribute for items in your CRM catalog and want to display that extra attribute in the list page ei ProductISA.jsp. If this is all you need to do, then good thing is you dont need to make any changes to any business object class.
Define a custom attribute in CRM catalog and assign its value. You may need to republish the catalog once you've done this.
On the Java side to access this extra attribute you can use the following code.
WebCatItem item = (WebCatItem) lstItems.get(nCount);
String strOrderCD = item.getAttribute("ZORDERCODE");
getAttribute() method reads the value of any custom parameter you may define in your CRM catalog. In case you want to send some extra data to CRM, you'll need to use the addExtensionData() method and would need to handle this extra info in the corresponding BADI.
Cheers
PB

Profile keeps old property value after change in Content Administration

Hello,
Inside of my coding I read a property value from profile:
          IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
          IPortalComponentProfile profile = request.getComponentContext().getProfile();
          String svalue = profile.getProperty("ProxySet");
Then I go to "Content Administration" and change a value from "true" to "false" in property "ProxySet", however it still shows me previous "true" value when I debug the code. I don't believe I have to restart entire portal to make this change work on one iView, right? Please advice!
Thanks,
Yan

Hi Yan,
Well that's true that you need not restart the portal after the changes in the iView, but have you saved all the changes made in the iView properties. Please check it and ensure you save all the changes made in the iView properties.
I hope this helpful/solves your problem!!! If so then Please reward points..
Rgds,
Vikas.

How to check old and new value for a text item attached to a lov?

Hi,
I am new to Forms.
I need your help in following.
I have a form which has a text item which is attached to a LOV. I want to track what changes are being done using that form. So i want to know what was old value and what is new value.
I can get the new value as it is there in form field. how can i know what was the old value.
Thanks
Prashant Pathak

This is wrong:
name_in(':' ||l_audit_block.field_name)
this is right and will get you the current value of the the item:
name_in('l_audit_block.field_name');
Assuming the name of you block is "l_audit_block" and the name of your item is "field_name".
Please note name_in() returns your current value for an item. In your case this may or may not be the "old" value. I define "old" value as the value it was when it was queried. If that is what you are looking for you need to use the get_item_property() call that Steve described above.
--pat

Is there a solution for iphone 4 too like iphone5, It doesnt have tab Cellular. How to check call duration for total dialled calls (after resting) on a particular day?

How to check call duration for total dialled calls (after resting) on a particular day in iphone 4?
Is there a solution like iphone 5, i.e.Settings > Cellular.

if the device is unlocked cellular is called mobile

Which table stores old value of IBAN number and how to retrive old value.

HELLO TEAM
We are going through an enhancement process that requires to display old value and new value of the IBAN number from the Vendor master records. As IBAN is a combination of the country key, Bank Key and Bank account number, which are all key fields, their values are stored in the form of key in CDHDR and and CDPOS tables. The bank details are only shown in other key tab/column and the field name is displayed as key in CDPOS. These sensitive field changes are displayed as created or deleted but do not show as old value=x and new value =Y.The old value and new value fields are blank. The same happens for object IBAN and the tiban table only stores iban numbers that are updated and does not store old value of the iban number.
If I have to display in the report s_alr_87012089, the old value and the new value of the iban number , how can i achieve the task. From which table we can retireve the old value of the IBAN number.
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Thank you in anticipation of a solution
Shekhar
Edited by: Rob Burbank on Jul 19, 2011 4:59 PM

Hello Team
We have explored all the above means. We are working in 4.7 environment. As we could not find an appropriate solution, we have approached the forum. The old value is not stored in cdhdr and cdpos and has the indicator as 'E' -Delete. So if an updation is done then it will delete old value and create a new value. This happens especially for the fields Bank Country Key,Bank Key, Bank Account Number. All we have checked the object attributes in the table lfbk, where for some fields it does track changes and for other it does not track changes. This is especially for the fields kovon and kobis.
If the requirement is to track changes to the fields Bank Country Key,Bank Key, Bank Account Number, kovon, kobis, iban which are sensitive data, and the report has to display old value and new value for sox compliance, how can this be achieved?
I have also gone through the SAP note 580266
If we are running a report to track changes to all vendors or a selected group of vendors, only some fields show up the value old value and new value.
Would appreciate if an appropriate solution is provided.
Request for a solution as i waited for 2 days if any expert could help!!!
Thank you
shekhar
Edited by: V_Shekhar on Jul 27, 2011 1:18 PM
Edited by: V_Shekhar on Jul 28, 2011 4:36 PM

Prompt constrain - prompt values are not refreshed after change in calendar

Hello,
I have prompt with Date, OrgUnit and Employee field in OBIEE 10g.
Date - calendar component "date between"
OrgUnit - multi-choice
Employee - multi-choice
I have checked "Constrain" checkbox on Employee field, because I want to show only employees from selected OrgUnit and also I have checked constrain on Date field.
After first selection everything works fine. I select some dates (I have calendar component - date between), some OrgUnit and I can see list of employees constrained by selected OrgUnit and Dates
- physical select is executed to get list of employees to multi-choice component
After that I change date interval, open employees multi-choice component but no physical query is executed and I will get back some cached result from previous request.
It seems that change in calendar component does not force refresh of data in other constrained components.
If I select some other OrgUnit, Employees are refreshed.
I tried to change component for Date from calendar to multi-choice. After some change of dates in multi-choice component. OrgUnit and also Employees are refreshed.
I also tried some different combinations of constrain checkboxes but with no success
So my question is: How can I force refresh (force execution of sql query) data in constrained fields after some change in calendar component?
Thank you

In my case It doesn´t refresh after change in calendar component. It does refresh after change in multi-select promot, or dropdown component, but doesn't refresh after change in calednar component.
BI server cache is not enabled.
If I open employee multi-choice component for the first time, physical query is executed. I change date to some other, open employee component for second time and no query is executed and I will get old values from previous action...

BPC 7.0 MS Script-Logic problem: New values used, old values written?

I am trying to using BPC Script logic to update my Sales cube, specifically Revenue=Units*Price and Price=Revenue/Units using the "Price" stored in a seperate Price cube.
Inside default.lgl, I am *INCLUDE-ing my own script:
*LOOKUP PRICES
*DIM PREIS:ACCOUNT="Price"
*ENDLOOKUP
*WHEN ACCOUNT
*IS "Units"
*REC(FACTOR=LOOKUP(PREIS),ACCOUNT="Revenue")
*IS "Revenue"
*REC(EXPRESSION=%VALUE%/LOOKUP(PREIS),ACCOUNT="Units")
*ENDWHEN
*COMMIT
Now, when I insert new "Units" values using the std. Excel template, strange things happen:
- The Revenues seems to be computed and updated correctly in the cube (if I check them using excel templates, they show up).
- The Units seem to have the values they had before... seems they get old values ?!
E.g. if I have several write operations say, I write units=2,3,4 and price is constant 10,
the values in the cube seem to be (table):
value written, units in cube, revenue
3 , 2 , 30
4, 3 , 40
The new value is somewhere in the MS Analysis cube, otherwise, how could later be the new value be shown, although the excel templates seem to show old values?
Any explanation for that strange behaviour?

I simplified and wrote the prices in the same cube as I send the data from with the excel template.
I tried using:
*WHEN ACCOUNT
*IS "Units"
[Account].[#Revenue]=[Account].[Units]*[Account].[Price]
*ENDWHEN
*COMMIT
*WHEN ACCOUNT
*IS "Revenue"
[Account].[#Units]=[Account].[Revenue]/[Account].[Price]
*ENDWHEN
*COMMIT
Now, if units are send from the excel template, revenue is calculated correctly.
If I enter revenue instead, seems that the 1st block is executed as well (why????!!!/how to avoid - I use *WHEN - what else should I do? ) which would explain the behaviour I get the old values for Units and Account again...
Related: How can I use "*WRITE_TO_FILE"? I tried both
*WRITE_TO_FILE Mylog.txt
*WRITE_TO_FILE "Mylog.txt"
But I can't find these file after sending data through the excel template... Do I have to create the files manually first or give full Path Names?
Thanks!

How to retrieving attributes old values from a OBJECT_CHANGED event

Hi,
I have installed Sun ONE Directory Server 5.2. I have registared Event Listener which implements both name space change and object change interfaces. After chaning some attribute value, i am able to get the new values of attributes using getNewBinging method. But when i call getOldBinding to get attributes, it is returning null. Can any one help me how to get the old values. This is very much urgent and we are trying to write custom connectors to synchronize the data in Sun ONE directory server with other directory servers like Oracle Internet Directory.
I am new to Java and JNDI.
It would be great help if any one can light me in this regard. Thanks in advance.
Thanks & Regards
Sreedhar

I have been also working for the same issue. getOldBinding() does not return old attributes in case of ObjectChanged event. So far I did not find any solution. Does anyone know any solution?

Check old value of MM42 characterisitcs Tab after change

Similar Messages

Maybe you are looking for