Check on Master Data Value (User Manual Input)

Hi all,
i have the following situation:
User has to insert a set of Characteristic Value (these are not limited in level for any value nor variable) to be able to enter layout and does manual planning, with my great astonishment i have noticed that BPS does not do any check on the master data value inserted by the user, for example if user insert value '1' for 0payscalety CH instead of '01' the system does not give any error message and goes directly to perforate the Master Data with this wrong value.
Does exist any setting/tip to avoid this unpleasant situation?
Many thanks in advance
Fabio

Hello Fabio,
personal I would not set up a data model, which makes differences between 01 and 1. It is known that this will make always problems in the future.
I believe it is quite more unpleasant that SAP does not provide detailed documentation...
You can use e. g.
- conversion routine in BW char.
- message, fox
- char. rel. and / or ABAP
- drop down list which does not allow manual input
to manipulate before / after input. These are some of those possibilities, which SAP provides.
regards
Eckhard
Message was edited by: Eckhard Lewin
Message was edited by: Eckhard Lewin
Message was edited by: Eckhard Lewin

Similar Messages

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • "Check BW Master Data" in MC62 issue

    Hello,
    I am creating CVCs from an Info provider.  I am selecting the "Check BW master data" when i create CVCs immediately.
    When i intentionally put wrong values in characteristics which are not in RSA1 (Info object-->Maintain Master data) i am unable to create the CVC when i create a single CVC.
    But when i create CVC immediately from Cube (The cube is uploaded from a data source through flat file) with values in flat files which are not in RSA1 (Info object-->Maintain Master data) , the system is not complaining that there is no master data. It is creating CVC for what ever values i have in Flat files. Is this normal or is the system supposed to error out just like it did when i create a Single CVC?
    Any idea how i can tackle this. Appreciate your help in advance.
    Thanks.
    Sai.

    Hi Sai,
    I can share what I understand.
    CVC is not BW data, it's part of APO DP master data and has connections to BW in the sense that you use the characteristics which are defined in BW.
    When you are creating CVC and checking for BW master data, you are checking if characteristic data is correct BW wise also.
    If the master data for characteristic is not found, BW is issuing an error.
    On the other hand, data in Cube is already a BW data, and all the BW related checks are already done at the time when your data has come from flat file to the Cube. So, there is no chance that you would get BW check related error when you create CVC from cube.
    Hope this helps.
    Thanks - Pawan

  • Checking the master data automatically before the payroll run...

    Hi Friends,
    Can anyone tell me that, is it possible to check the master data automatically before the payroll run.
    If any user forget to maintain any important info-type ( like Cost Distribution ) in time of master data maintenance, SAP allow the Payroll system to run the payroll for that employee. Only in time of account posting the user is able to know the problem and due to rectify the problem they have to delete the payroll.
    So, I therefore wants to know that is there any check point or can customized any such things, which will check the necessary info-types before running payroll and generate an error massage about the missing info-type and also skip the processing for that person.
    With regards,
    Diptendu

    have
    a look at this report
    but before that make sure wht are the mandatory infotypes that are maintained to the employee so that u can come to an idea what are infotypes that are maintained for the memployee
    se 38   HTWLINFO  read the documentation of the is report mmight be useful

  • 'Master data type User table cannot add row'-DTW error

    Hi All,
          I am creating a template for user define Master data table from DTW, when i am trying to port data by using that template through DTW. it is giving error like--'Master data type User table cannot add row'
    So can any one have solution for this.
    Regard's
    Hari

    Hari,
    Please see SAP Note 1234690 on the SAP PartnerEdge Portal.  This seems like a similar problem although the example is using the Business One SDK which uses the DI API.  The DTW also uses the DI API ... so there may be a relation.
    You may want to check the latest patch level for SAP Business One 2007A as the note says it is a known issue.
    Eddy

  • Read document attached to master data value

    Hello.
    I'm using FM RSOD_DOC_MAST_CHANGE to attach files to master data values. But I don't know how to read attached document((  Does anybody know?

    Hi.
    Take a look at [following thread|Document read functionality;.
    Regards.

  • How to check the master data records in using SE16 transaction?

    Hi,
    Can you please help me to check the master data records using SE16 transaction?
    Loaded master data for Characteristic and want to check the records in the master data tables.
    Thank you for your help!
    Lakshmi

    Hi!
    Welcome to SDN.
    you have to check the master data tables.
    soo in Se16 you have to select the appropriate master data table and view the data.
    following thread explains about masterdata tables
    MasterData table?
    regards
    mohan
    Message was edited by:
            Mohan Krishna

  • Check what master data was carried with last load

    Hello all,
    I have an issue. I'm looking for a solution, so maybe you can help me :).
    I have the InfoObject A linked to InfoObject B , through a transformation.
    I also have a DTP.
    Running the DTP , I load master data from A to B.
    A and B already contained data, before my load.
    How can I check what master data was carried with my last load?
    (I don't have the chance to check by request, as if in the case of a cube , for example)
    Thank you.

    I agree like cube we cannot see the request wise data wise data .
    The alternate to this is you are updating the data through the DTP correct .
    Goto DTP maintenanve screen and click on the PSA and check the date wise data in that .
    I hope you must be awared of  which date data you need to see . So you can check from the DTP PSA screen .
    Assign marks is the best way to appreciate help

  • Make Indicator "check bw master data" mandatory when creating CVC in MC62

    Dear All,
    There is a requirement to make the indicator "check bw master date" mandatory while creating CVC using tcode /sappao/mc62.
    I have tried SHD0 - transaction variant. This field is not shown.
    Is any other way to realize this?
    Thanks,
    Bin

    Hi,
    It is not possible to make the indicator "check bw master date"  mandatory  as this is generated program.
    To meet your requirement using BADI /SAPAPO/SDP_MASTER method SET_COMBI_VALUE_CHECK you can force the
    system to check 'BW master data' or if this flag is not set then throw the error message.
    Regards,
    Sunitha

  • Showing master data value in report for which no record in Infoprovider

    Hi,
    We have the following reporting requirement. The master data values , e.g. 0Customer should appear in the report for which no sales has taken place, i.e no record in Infocube.
    We have defined a multicube using Infoprovider & 0Customer Infoobject, but the report seems to show only values from InfoCube, not the values which are not there in infoprovider but are present in infoobject.
    Please suggest.
    Thanks & Regards
    Madhu
    00919830957798

    Madhu,
    There is a how to paper on how to do this. It available in the BW InfoIndex under Multiproviders and is called Slow Moving Inventory Scenario.
    https://service.sap.com/~sapidb/011000358700008387152002
    This document details out the process of reporting on master data values for which no transactions ahve been recorded. This is achieved by creating a MultiProvider on a Cube and InfoObject and then using teh record count property.
    Cheers
    Aneesh

  • Checking the Master Data Load

    Hi,
    If my report doesn't work and I have to check the Master data is uploaded properly or no, How do I check that?
    Can you help with the steps?
    Thank you.

    Hi Radha,
    The shortest way to check the Master data of any info object is:
    Goto SE16 or SE11:
    In the table text box give: /BI0 or C/MXXXXXXXXX
    '0' for SAP generated infoobject
    'C' for Customer generated infoobject
    View of MstrDtaTbls: 'M'
    Master data tab: 'P'
    SID table attr.: 'X'
    Text Table: 'T'
    XXXXXXX - infoobject.
    Hopes this helps.
    Regards,
    Ravi Kanth

  • Any difference between Master data and User master data ?

    Any difference between Master data and User master data ?

    hi
    A user master record defines the authorizations assigned to a user. Based on these authorizations one can access the master data.
    Master data - it is the data which is used long term in SAP r/3 system such as vendor master , material master, customer master,
    there is no such thing like user master data to the best of my knowledge
    hope this helps
    regds
    Manan

  • Check user manual input in excel BPS layouts

    I have some problems for manual input characteristics checks on an excel bps layout.
    I need to assign the value of an header characteristic to a detaild characteristic. How can I do ? I have already tried with characteristic rels. (exit, attributes, etc.) but without results.
    Thanks in advance.

    Hi Mario,
    I am quite sure, that if a char is in an P.Level, and there is a char relationship for it, the char relationship will not be called (somebody correct me if am wrong).
    So, in your case, you want to derive SALES ORG from Company code using char rel. The sales org is in the p.level, since it is in your layout. Threfore the char rel will be not called.
    If you want to have it works, do not select sales org in your level. I assume that you filter your comp code in level with a bps variable. Get this variable value (using API_SEMBPS_VARIABLE_GETDETAIL function) and assign it to char SAles org in your char rel exit. Everytimes when you save your plan data, the char rel exit will be call and sales org will be derived.
    If you want to show and derive the sales org in your layout based on selected company code, create a bps variable type exit for it, and read and derive the value from comp code variable.
    Best Regards,
    Suan Liono

  • Not all the master data values appear in variable dropdown

    Hi all,
    we have a BPS variable in planning folder (SEM 4.0) where we have defined a variable with 'restriction required by user'. When the uses take a drop down they don't see all the values in the dropdwon but they can still manually input the missing values.
    Any idea?
    BR,
    SSC

    Hi,
    Make sure that the navigational attribute is assigned in the cube. Same goes for the workcenter. Also make sure when you loaded master data for workcenter the data for the navigational attribute also got loaded and you activated the same.
    Cheers,
    Kedar

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

Maybe you are looking for

  • Help with dynmicaly update text in document/s.

    Hi, I am working on a project that will require the following. I will have a document in InDesign, everything will be formated - lets say a template. I will need a multiple instances of a certain word (let call it "word A") that is available in the d

  • Best Practice for Retiring Superseded or Expired Updates

    If you want to clear out superseded or expired updates, do you delete them from your update package, the deployment package, or both? Or is there another best practice for this? Thanks, Bryan

  • Can I create two different FDM applications in a single database?

    Hi, Atpresent we are using separate database (MSSQL Server 2008) for each FDM applications, now our databases have increased in numbers due to increase in number of applications. Now we are searching for any possibility to use a single database for m

  • Reconnect in sub folders.

    In order to maintain my windows file structure, I store images by year then month then day, I moved a year's worth of images from one hard disk to another to free up space on the main hard disk. Now I wish to reconnect these images using PSE3 organiz

  • Opening Microsoft Works files in OS X

    I have some files that I saved as .wps back when I was a sad little user of Microsoft Works (they didn't even give you Word with a new computer back then, the cheapskates)... I need to open them somehow on my MacBook. Anybody have any ideas for openi