Check Oracle database

Windows Server 2008 64 bits - Oracle 11g 11.02.0
I had a problem with an application yesterday morning.
I had error ORA-7445 followed by some deadlocks and then the database went down.
I restarted the database, and everything works fine. system and performance are ok.
I've just finished the ADM1 course. The ADM2 will start in September. So I stil need to aquire some experience.
I don't have any error in alert log file refering to block corruptions.
The backups are working fine, although I know that backups don't really check this kind of problem.
And at this moment, I don't have any user complaining about anything.
In Microsoft SQL databases, I can run checkdb command in order to check if database is ok.
I'd like to execute a similar command in oracle database in order to check if there is any corruption.
I know there are some check logical commands available for Oracle.
But I have no idea about how much they are going to affect my system.
Could you please give me some suggestions based on your experience ?
Thanks in advance,
Ed

788042 wrote:
I executed the Data Block Integrity Check, but it was too fast.
In the end I checked the result :
Run Name : CHK_0001
Run Id : 112001
Check Name : Data Structure Integrity Check
Mode : MANUAL
Status : COMPLETED
Start Time : 2011-08-19 11:43:55.421000 -03:00
End Time : 2011-08-19 11:43:56.031000 -03:00
Error Encountered : 0
Source Incident Id : 0
Number of Incidents Created : 0
Please answer some questions :
1) Is it normal this procedure to execute so fast ? ( less than 1 second ).
2) For Data Block Integrity Check, I have parameters related to File and Block numbers. If I don't inform anything here.
does it check all the database blocks ? Does this routine take a long time to finish ?
Thanks in advance,
Ed
bcm@bcm-laptop:~$ dbv
DBVERIFY: Release 11.2.0.1.0 - Production on Fri Aug 19 10:45:18 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Keyword     Description                    (Default)
FILE        File to Verify                 (NONE)
START       Start Block                    (First Block of File)
END         End Block                      (Last Block of File)
BLOCKSIZE   Logical Block Size             (8192)
LOGFILE     Output Log                     (NONE)
FEEDBACK    Display Progress               (0)
PARFILE     Parameter File                 (NONE)
USERID      Username/Password              (NONE)
SEGMENT_ID Segment ID (tsn.relfile.block) (NONE)
HIGH_SCN    Highest Block SCN To Verify    (NONE)
            (scn_wrap.scn_base OR scn)

Similar Messages

Checking Oracle Database availblity using JSP

Hello All,
How to check the database availablity using JSP like whether the TNS Listener is up or not, or the whole database is up or not.
Thanks
Rahul

Hi,
To see if your listener is up or down you can use the lsnrctl status, and to start use start option. You can make a similar operation for database, use the sqlplus program.
Another option is program a batch script, if you wan't use the commands.
Afonso

Check "Problem: Oracle Database 10g Release 2 can only be installed in new

Hi All
Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
In product specific prerequisite screen I am getting the
check:Oracle Home incompatibilties is failed I am getting the error
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: Oracle9i Database 9.2.0.1.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
Recommendation: Choose a new Oracle Home for installing this product
though I am installing it in different oracle homes why i am getting this error?
Is it because 10g installation is picking the same oracle inventory /oracle/inventory
do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
Thanks inadvance
Gagan

I figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
~ Madrid

How to check odi master repository exist in oracle database?

Is there way to check the ODI master repository is exist in oracle database or any api to test that?
Your help much appreciated.

Thanks for you reply,
That's fine, i think you aware of that, once open the topology manager "topology.bat", you can test the master repository, if you give any existing database user but its not master rep user, that throw exception "Master repository is not installed on this connection".
I want know what are tables and data's are getting verified during the connection test.
I think If you know regarding above my question, that will solve my problem.
Thanks

Checking the health of Oracle database

How to make sure that the Oracle database Server is running at any given time. Is there any way I can send the small data pockets to cross check it is up and running. I can always try to connect to Oracle database server and if it fails I know it is not working. I am looking for any other approach from Oracle guru’s.
Oracle 10g R 2 onwards.
Thank you,
Smith

parse alert.log
system state change will be seen there.
*woo

Oracle Database Audit Health Check

Hi Experts,
I have been looking for checklist to perform the oracle database audit.
what is the best practise to perfrom the database audit health check.
Regards
Mohammed. Abdul Muqeet

Hi,
What is it mean for Health Check, You mean you have audit enable in your database and you want to manage it. if so
then you have to take care of Audit area at OS level and sys/aud$ table
for Audit Area: you can schedule a job to clear that are time to time
for sys.aud$: Move this table to non- system tablespace and moniter the uage. can purge the data if not required after taking the backup..
HTH

Oracle Database 10g relase 1 Installation Problem on RHEL 3 ES

Dear all
I'm trying to install oracle database 10g r1 X86_64 on Intel Xeon Machine with EM64T technology with RHEL 3 ES update 2 X86_64 edition. The problem is described below :
Oracle OUI .runInstaller collapsed with such a following error:
An unexpected exception has been detected in native code outside the
VM.
Unexpected Signal : 11 occurred at PC=0x8077470
Function=[Unknown.]
Library=(N/A)
Is there anyone can help me ??

Check pushitz website and ensure that you have all the required rpms installed properly.
Check the log files in the installation directory. That should give some more details as to what exactly is going on.

TimeZone.getDefault().getID() does not exist in your Oracle database table V$TIMEZONE_NAMES???

Hi Everyone,
My Jdev version is 11.1.2.3.0.
I have developed many ADF applications in this version itself by setting time zone as -Duser.timezone="+05:30" and all were running fine.
But Jdeveloper got crashed so i reinstalled the same version but now none of the applications are running.
Its showing error as below:
oracle.jbo.JboException: JBO-29112: The time zone 'GMT+05:30' defined in adf-config.xml or TimeZone.getDefault().getID() does not exist in your Oracle database table V$TIMEZONE_NAMES. Please set an available time zone in your TZ environment variable or user.timezone Java system property.
What to do now?
how will i know wat time zone should be set?
please help the needful...
Thanks.

Check if www.jobinesh.com/2010/12/why-do-i-get-oraclejbojboexception-jbo.html helps.
Timo

Can't mount oracle database on linux system

This is same as previous posting just added
e-mail and username info fo forum posting.
I am not able to mount an Oracle database.
I am new to Oracle and am working on an Oracle8i installation on an
Intel Linux Suse 6.3 platform. I am using only one harddrive and am
not using the 4 mount points as mentioned for efficiecy purposes in
the Oracle documentation..I am using the installation cd from Oracle8i
for Linux Starter Kit by Oracle Press. If anyone has this book they
can refer to pages 41-44 for the examples I followed.
As sysdba in sqplplus using the STARTUP command I can not Mount the
database -step 2 of the 3 stage process (Start, Mount and Open the
database) of opening an Oracle database.
I show the errors I encountered when I did the first 2 of the 3 steps
in the step-by-step mode (STARTUP NOMOUNT pfile=, ALTER DATABASE
MOUNT) in the sqlplus session and alert log respectively with startup
nomount and alter database mount for this sqlplus session.
Additionally I show the init.ora file lines referring to control file
which seem to be referred to by the sqlplus error messages and the
alert.log file. Perhaps some can give me some advice as what I can try
to fix this problem.
At the end of this e-mail I added several questions I had in regard to the control
files. Any help is appreciated.
Well, here are the sqlplus session results and its alert.log file:
Oracle sqlplus session usr/oracle as sysdba
oracle@CHESTNUT:~ > sqlplus
SQL*Plus: Release 8.1.6.0.0 - Production on Mon Mar 19 20:47:49 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: usr/oracle as sysdba
Connected to an idle instance.
SQL> startup nomount pfile=/usr/oracle/dbs/init.ora ;
ORACLE instance started.
Total System Global Area 24989680 bytes
Fixed Size 69616 bytes
Variable Size 24637440 bytes
Database Buffers 204800 bytes
Redo Buffers 77824 bytes
SQL> alter database mount ;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more
info
SQL> shutdown immediate ;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected
oracle@CHESTNUT:~ >
alert.log file for above session
Mon Mar 19 20:48:38 2001
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.6.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 3500000
control_files = ora_control1, ora_control2
db_block_buffers = 100
log_buffer = 32768
log_checkpoint_interval = 10000
db_files = 80
db_file_multiblock_read_count= 8
global_names = TRUE
db_name = DEFAULT
parallel_max_servers = 5
max_dump_file_size = 10240
PMON started with pid=2
Load Indicator not supported by OS !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon Mar 19 20:48:58 2001
alter database mount
Mon Mar 19 20:48:58 2001
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Mar 19 20:49:01 2001
ORA-205 signalled during: alter database mount
Mon Mar 19 20:49:12 2001
Shutting down instance (immediate)
License high water mark = 1
Mon Mar 19 20:49:12 2001
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
archiving is disabled
init.ora control files
# define two control files by default
control_files = (ora_control1, ora_control2)
Here are my control file questions:
I need to know several points:
1) What are control files susposed to
contain and how would I recognize them?
I used the
unix find /usr/oracle \*ctl* -print
command to locate files with a ctl extension.
This resulted in about a dozen such files in
different directories as shown below:
./bin/lsnrctl
./bin/extractlib
./bin/agtctl
./bin/oidctl
./bin/lsnrctl0
./bin/agtctlO
./rdbms/demo/ulcase1.ctl
./rdbms/demo/ulcase10.ctl
./rdbms/demo/ulcase2.ctl
./rdbms/demo/ulcase3.ctl
./rdbms/demo/ulcase4.ctl
./rdbms/demo/ulcase5.ctl
./rdbms/demo/ulcase6.ctl
./rdbms/demo/ulcase7.ctl
./rdbms/demo/ulcase8.ctl
./rdbms/demo/ulcase9.ctl
./ldap/load/dn.ctl
./ldap/load/attr_store.ctl
./ord/ts/demo/tsquick/tsquick.ctl
./ord/ts/demo/usageutl/utildat.ctl
./ord/ts/demo/usage/stockdat.ctl
./ord/ts/demo/usage/stockinc.ctl
./ord/ts/demo/retrofit/sales.ctl
./ord/ts/demo/retrofit/sales2.ctl
./ord/ts/demo/applet/indexdemo.ctl
./javavm/admin/libjox8com_sun_jndi_ldap_ctl.so
./md/demo/examples/migctl.h
./md/demo/examples/migctl.c
2) On page 100 in the book Oracle 8i A Beginners's
by Oracle Press mention is made of a
CREATE CONTROLFILE command that can under
circumstances be used to re-create a control-file.
but that is all that is said about it. Perhaps
you might know something more about it.
3) Would you recommend any good text for
Oracle DBA's, especially for the problem of the sort
that I am encountering?
[email protected]
null

It's probably not supported on RHEL5/Centos5/etc., but...
You can get the installer to function using the following steps:
- extract the cal_linux_*.tar.gz, and cd into the OracleCalendar_inst directory
In there is the actual installer, cal_linux.
- the cal_linux is shell script wrapped around some binary blobs. The installer's
problem is that Oracle is setting the LD_ASSUME_KERNEL=2.2.5 environment
variable, which is a mistake on RHEL5. You need to make it not set that variable,
but you need to do so in a way that the size of the shell script does not change at all,
and none of the binary blobs are impacted.
- the approach I took was
mv cal_linux cal_linux.BAK
sed -e 's/LD_ASSUME_KERNEL=2.2.5/LD_ASSUME_KERNEL= /g' < cal_linux.BAK > cal_linux
chmod a+rx cal_linux
cal_linux -i gui
Note: you must have exactly 5 spaces in the substitution part of the sed command, because you're replacing 5 characters (2.2.5), and the size of the shell script must not change.
If you do that, the installer should run (one warning from awk still) and you should be able to install the product.
Tim

Retrieve data from a synonym in oracle database through db connect

Hi Everyone,
I have created certain synonym for some tables in oracle. I want to retrieve data from it through db connect but where through source system and then selecting database tables, only tables and views are available.
Synonyms are not available to create data sources and retrieve the data from it. Why is it so. Is this a limitation of db connect.
Can anyone please let me know about it.
Thanks,
Joshua.

Hi,
You want to import data from an external Oracle database into your BW 3.X. To do this, you can connect the external database to the BW 3.X release as a source system using the external database connect. BW 3.X here represents BW 3.0, BW 3.1 and BW 3.5 because in other (DB relevant) parts, all 3 versions are based on the same source code.
General information
The above function allows you to load data from an external Oracle database (not a BW database) into your BW 3.0 system.
There may also be constellations which cannot be used directly through the DB Connect access. However, it should be possible to find an adequate, customer-specific solution for most of these scenarios.
In such situations, the resulting work falls into the area of Consulting and cannot be handled via Support.
Successful implementation of a connection requires corresponding expertise and experience in the use of the source database in the areas:
                - Tools
                - SQL syntax
                - DB-specific functions
Corresponding knowledge of the source application is also required to ensure that semantically relevant data arrives in the BW system.
Procedure
You should execute the following steps to connect the source system (Q) to the BW system (BW):
Installing the client software on an BW application server
                     Of course, you only need to install the client software if you are using BW with a non-Oracle database.
                     Use the Oracle setup program on the database CD (runInstaller on Unix) to start the OracleInstaller. Follow the program instructions and the DB installation instructions to install the Oracle Client software on BW.
Testing connection setup from BW to Q
                     After you install the client software on BW, try to set up a connection from BW to the server on Q. You may need to adjust the tnsnames.ora or sqlnet.ora files for this, to introduce the Oracle systems (to which contact should be made) to BW. You can test the connection by executing the command "tnsping QDB" on BW to check whether the client has established contact to the QDB database on the Q system.
Creating a separate U user in Q
                     We recommend that you create a separate U user in Q for connection to BW. This means that authorization and administration questions can be solved centrally.
Displaying data sources in Q for the U user
                     To provide U data for users other than U, you can create views on other user tables as user U:
                     CREATE OR REPLACE VIEW viewname AS
                       SELECT * FROM QDB.tablename
                     You may have to grant SELECT privileges to user U in the QDB schema:
                        GRANT select ON QDB.tablename TO U
                     Of course, you can also restrict or reformat data in the view arrangement (for example, change from internal date format into the SAP date format). JOIN operations using several tables are also available.
                     !!! Synonyms do not yet work!!!
                     Synonyms that you can create as described below are another option for providing a complete table for the user U:
                       CREATE SYNONYM synoname FOR QDB.tablename
                     !!! Synonyms do not (yet) work!!!
                     After you have displayed the require data for user U, you can simply use
                       SELECT * FROM <view or table>
                     on the Q system to check which data is returned.
                     You can now open a link to Q as user U in the BW system with SQLPLUS and check, using the same SELECT, whether this data is also seen in the Oracle client. If this is not the case, there is probably a connection problem.
Creating a connection from BW to Q in BW
Including data sources of user U user in Q in BW.
Solution
Supported BW, Basis and BW 3.0B database versions, Basis 6.20 Support Package 2 (or higher)
      Oracle 8.1 (or higher, see below)
Possible problems
- Synonyms do not (yet) work!
Up to now, only tables and views have been used as data sources for the DB Connect from the R3 Basis. As soon as synonyms are also used in the Basis, you will be able to convert created views (or even replicated tables) to synonyms as a workaround.
With Basis 6.40 at the earliest, therefore as of BW 3.5, you will also be able to use synonyms. Until then, the following will help:
CREATE VIEW <view_on_synonym> AS SELECT * FROM <synonym>
- The source DB must have at least the release version of the BW DB.
Oracle only ensures the support of client-server links if the version of the client is not higher than that of the server. So if BW has Oracle version 8.1 and, as in the case of Dbconnect, is run as a client against the server of the source database, the source database must have at least release Oracle 8.1 or higher.
Of course, you have the option to install the Oracle client software of a lower version and then use this for the DB connect. This is also the procedure used to work with a DB connect on external databases of other vendors.
Furthermore, the implementation of the DBconnect function in BW uses SAP Basis functions. Specifications of Oracle 8.1 database catalogs are used here. The source database must therefore have at least Version 8.1.
- Oracle Client Software Version
If you want to connect from an Oracle BW DB to an Oracle source DB, for the DB connect you naturally use the client software that you already installed on each application server.
If you want to connect from a non-Oracle BW DB to an Oracle source DB, check item 3 of note 521230 to see which Oracle client software version is released with your BW R3 kernel and use this version.
- Date and time fields in Oracle and their conversion into SAP-compatible column formats
Example with a DATE field:
Since a SAP table does not have a DATE field (date values are NUMC(8) and time specifications are NUMC(6)), we will use the Oracle DBA_TABLES system table as an example.
    SQL> desc dba_tables;
The Oracle DBA_TABLES system table has a LAST_ANALYZED field. This is a DATE type field and is recognized as a date field of 7 characters by DBA_CONNECT. However, the import does not work because the DATE is a 7-byte conglomerate of "...century, year, month, date, hour, minute and second." (extract from the Oracle documentation).
To make this DATE field legible for DB connect, you must use the TO_CHAR function in a VIEW. This should display the following examples:
SQL> select LAST_ANALYZED from dba_tables
      where table_name like 'RS%' and rownum < 10 ;
The formatting used here is the default used implicitly by SQLPLUS.
SQL> select to_char(LAST_ANALYZED,'YYYYMMDD') as dat from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format YYYYMMDD and should be loaded correctly by the DB connect as a date.
SQL> select to_char(LAST_ANALYZED,'HH24MISS') as tim from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format HHMMSS and should be loaded correctly by the DB connect as a time.
You can use the following example for more detailed experiments:
SQL> select to_char(
       TO_DATE('03-FEB-2001 04:05:06','DD-MON-YYYY HH24:MI:SS'),
       'YY-MM-DD HH24-MI-SS') as datim from dual;
with the result:
DATIM
01-02-03 04-05-06
When you create a VIEW and use the TO_CHAR function (or other functions), you should easily be able to avoid problems with the interpretation of date/time specifications (and other reformatting).
Details about the functions and the formats are contained in the Oracle documentation.
- Special characters
A words that contain special characters can only be imported correctly if the code pages in BW and in the source system are identical. If the code pages are not the same, DB Connect can be used if the characters to be imported appear under the first 127 characters of the character set.
The use of multibyte code pages in the source system for saving data using character sets with more than 256 characters (Kanji, Katakana, Hiragana, Korean, Chinese, Tagalog, Khmer, Arabic, Cherokee, and so on) can cause the characters to become corrupt.
For questions concerning the code pages, also refer to the FAQ note 606359 and question/answer 19 that appears there.

How to delete data before insert in oracle database

Hi friends,
I have one scenario.I want to send data from sap to Oracle database.Befor i am inserting data in database table,i want to clean/delete all the records in the table .This interface will run twice in a day.Can any body help me.
SAP-PI-JDBC
Thanks
Ravi

Hi Puneet,
As per u r suggestions,i am using stored procedure.But i am getting following error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. MASTERXXXXXX' (structure 'Statement'): java.sql.SQLException: ERROR: Invalid XML document format for stored procedure: 'type="<SQL-type>"' attribute is missing for element 'NAME' (Setting a SQL-type (e.g. INTEGER, CHAR, DATE etc.) is mandatory !)'
I have define below structure.Please check the structure and guide me.
<Statement
        Action   attribute required
        Table
Access
        Empname   string
        Empid         string
        date            date
          Type     attribute   required
EXECUTE----
>Action
Table----
>MASTERXXXXXX
Type----
>char
Please check the above structure andguide me to changes if any requires.
Thanks
Ravi

Import/insert data from XML into Oracle database tables?

Hi. (I am using JDeveloper 10.1.3.3.0 and Oracle 10g)
I have been able to export the data from one of my database tables by using a View Object and .writeXML.
Now, I want to take an xml file that is formatted in the same way as what is spit out by the writeXML and put that info in my database table. I followed online examples and have tried using .readXML like so:
Element element = XMLDoc.getDocumentElement();
vo.readXML(element, -1);
I know it is sort of working, because at first I got an error message that one of the required attributes was missing. So, I added that attribute to my xml file and ran my code. No errors. But, I checked my database, and the new records were not added.
Is there something I have done wrong? Or is there perhaps something I left out? I also noticed there were several versions of readXML like readFromXML. Which one should I use and how?
Thanks.

KUBA, I changed my code to match your example:
DocumentBuilder db = DocumentBuilderFactory.newInstance().newDocumentBuilder();
File xmlFile = new File("C:/myfilehere.xml");
Document doc = db.parse(xmlFile);
Element element = doc.getDocumentElement();
vo.readXML(element, -1);
vo.getDBTransaction().commit();
I still get no errors, but my database table has no new records.
Any ideas why?
Thanks.

Error while installing Oracle Database Lite 10.2.0.1.1 for Win

Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
David

Hi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you.

Installation oracle database 10.2 on mac snow leopard server

Hi.,
I am trying to install oracle database 10.2 on mac server snow leopard but getting following error:
rsgsoftware:Disk1 oracle$ ./runInstaller
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-08-31_10-22-39AM. Please wait ...The Java RunTime Environment was not found at /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
hence JRE is inbuilt with mac.
Can any one help me in this regard.
--SD

damorgan wrote:
I am trying to use my pet cat as a boat and it doesn't work either.That's because, just like the OP, you are not taking the right approach. You simply need to MODIFY the cat - in your case, by adding a few things: a keel, ribs, hull, mast, sails, rudder, tiller (to name a few).
Similarly, OP needs to MODIFY Snow Leopard by adding the appropriate infrastructure, executables, and configuration to meet the install requirements. Just because that implies a different kernel and system libs doesn't mean it can't be done.
Just don't let the animal rights people (or professional administrator) know about the mods.

Installation oracle database 10.2 on mac snow leopard server JAVA ERROR

When I try install DB 10g in my Macbook Pro with Snow leopard show this error when I try the 'installer' :
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_08-45-47PM. Please wait ...The Java RunTime Environment was not found at /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
logout
Please help me its urgent !
Thanks
Best Regards

Welcome to the forums !
For urgent issues, pl open a Service Request with Support at http://support.oracle.com
The forums are a loose organization of unpaid volunteers and cannot support urgent issues ;-)
AFAIK, Snow Leopard has not been certified for 10g yet.
Pl confirm that you meet all of the requirements for the install - http://download.oracle.com/docs/cd/B19306_01/install.102/b25286/toc.htm
See related thread Re: Install Oracle Database 10g on Mac OS X Snow Leopard
HTH
Srini

Check Oracle database

Similar Messages

Maybe you are looking for