Check our name in SAP data base

Hi,
Please tell me how to check our name in SAP data base and can we check our score as well as our sertification details also, if yes tell me proceedure.
Thanks.
Regards
Samir.

Hi
I dont know if I understood your question but as far as I understood you are asking how to see your name in the SAP database. User names are maintained in the data base and you can see the details after logging into the system using menu option System> User Profile> Own data. Here you can see the user ID and and more details about the company address etc if it is maintained.
Please let me know if this is what you are looking for
Thanks

Similar Messages

Creating a Crystal Report from a non-SAP data base

I have the following scenario
server1\myDataBase
server1\SAP\sapDataBases
in sapDataBases I have about 30 company databases. I am trying to create a report, that gets informatino from a table/view/SP from server1\myDataBase, when I try to PREVIEW or SAVE such report on SAP Business One, I always get errors as
I understand that this eerror means taht I can't invoke the data from out of SAP; it needs to be inside SAP (at least the SP, incoking some other data bases and stuff..)
Some bodies have told me that it is beacuase I can only create a report from a table/view/sp that resides in the running/currently SAP company database. Is this right?
Also, If this is the case, this means that If I have an SP taht I use for a crystal report, and 30 companies, I have to create such SP in the 30 companies?
This is my software details:
SQL Server 2012
SAP Business One 9 PL 11
SAP BusinessObjects Crystal Reports 2013 Support Pack 2 version 14.1.2.1121
What I want to do is to create a non-SAP data base to create all the SPs/Views for reports, to centralize it, and the just create one reporte and do the 30-imports in each company database, without the need of creating such sps/views in each company-database. Is this possible?
Thanks

Moved to Integration Kit forum.
The people in this forum will know more about the data structure than the CR Design forum which typically doesn't know much about the SAP Data sources Structure.
Don

Calling image from backend(SAP data base)

How to call image from the data base table.
I want image should be displayed on the screen,it has to take that image from SAP data base.
Please help me.
Regards
Sushma

You could write a java class to read the binary stream of data from the SAP backend and display the same in a WD application.
Also refer to the following blog, might help you.
The specified item was not found.
Thanks,
GLM

IDOC field to SAP data base field

Is there any way to find out the field names of SAP database table associated with the IDOC fields??
I would appreciate for any types of help in this.
Pranav

Hi,
To find inbound FM, you can go to transaction WE57. Go to selection -> by contents (menu), select basic type and enter the corresponding IDoc type. The system will display the corresponding FM(s).
You can also go to transaction WE64 to find the inbound and outbound FM(s).
Regards,
Ferry Lianto

How to upload the data from legacy system database to SAP data base

Hi.
We are doing analysis of Legacy system and which needs to be converted to SAP system i.e. SAP implementation.
I just want to know , how we migrate the existing whole data( from legacy system) into SAP system.
and which method is the best method to use data migration from legacy to SAP system if data legacy data amount is huge.
Please suggest me.
Thanks.

Hi
We can either use the BDC or BAPI or LSMW or Direct Input techiniques for the data transfers.
The combination of both Session and Call transaction can be used to achieve this that includes the error handling also. This invloves the screen interaction.
These days, BAPIs are used to overvome some upgrade problems. For easy upgradation, we cna go for BAPIs. Here ther is no screen intercation.
LSMW mainly used for master data transfers using some standrad programs.
As per your client or company desicions we can choose any of them.
Please refer to these links for more understanding -
BDC Vs LSMW -
BDC VS LSMW
BDC Vs BAPI -
BDC VS LSMW
Thanks & Regards,
Chandralekha.

Sap data base

hai all
Regarding sap database ,how much knowledge i needed as a SD consultant.
thanks

really...
no database knowledge is really needed.

Applet and Data Base. Help me PLEASE!!!

Hi,
I'm a brazilian man.
Can a applet make consults in my data base each "x" seconds?
I need open a frame with other applet inside him (the frame)...
Open the frame after check a flag in my data base.
Have you a source code for this problem?
I hope you can help me!!!
I'm waiting...

Hi,
I need a applet that check a flag in my database each "x" seconds...
Must I to use RMI for access the remote database, ok? How (if yes)?
If the flag is found then a "new MyFrameClient()" is open... This system is for instant communication for two active users in my site! First, a user click on link for invitation (then update fields in my database) and a "new MyFrameServer()" is open. Second, after check in database, a "new MyFrameClient()" is open and start chatting.
Understand me?
I hope you can help me, please!!! Know (or have) you for a source code for this?
I'm waiting for reply, ok!!!

Inserting in the UUT_Results table a value that we read from our data base from a local variable

We would like to include in the UUT_Results table a value that we read from our data base into a local variable during the execution of our sequence file. We found that by modifying the configure database options we were able to add a column for this variable, but the local variable was not available to be placed into an expression for that column from the local variables or parameters. Is it possible to do this, and if so, how? Station Globals were available to be included in the expression, however the sequence file may be executed on more than one system which makes the Global unavailable on systems other than the one where the sequence file originated.

You can use the TestStand API to programmatically create global variables at runtime, thus ensuring their existence. For example, you could call Engine.Globals.SetValString("GlobalStringVariableName", PropOption_InsertIfMissing, "variable value")
Of course, if you need to test multiple UUTs in parallel, a single global is not sufficient. In that case you might consider adding the field you need to the UUT datatype in the process model. You could then access the field in your sequence via RunState.Root.Locals.UUT.YourNewField = YourNewValue.
If you also want your sequence to run without using a process model, you must check for the existence of the UUT before accessing it. You could use the expression function: PropertyExists("RunState.Root.Locals.UUT.YourNewFi
eld")

Data base oracle in SAP

Hi,
The combination of all dimension id's ideally make the primary(composite) key of the fact table.
it seems that there is a database restriction of 16 fields to be combined to make a joint primary key.
I heard that Oracle table join relation is the restriction of 16. I mean foregn key relations from a table ( fact table ) can not exceede 16. and thus we have 16 dimensions as the restriction..
It is ORacle limitation.. ( data base )
Any data base can not have more than 16 Fields as primary key in a table and hence 16 dimentions as MAX limit..for our facttable / cube.In database tables level we have only 16 primary keys, thats the reason why we hav 16 dimensions in infocube.
( remember oracle is the database we use for SAP ).
Rds
vairava ganesh.G

Yes, you understand the issue. Not sure about all the other DBs, I think they have 16 column index limits as well. Even if one of them would support more columns in the index, I doubt SAP would reengineer the BW to support them, until/unless that DB had a major portion of the BW installations.

What are Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina Joshi

Hi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
     -- Hardware Sizing
     -- Preparation of Data Centres
     -- HANA Hardware preparation
     -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
     -- House Keeping activities on BW system (data clean up, etc)
Post Installation:
     -- Sanity checks / Preparation and License checks
     -- JAVA Configurations
     -- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
     -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
               - ZBW_HANA_COCKPIT Tool
               - ZBW_HANA_CHECKLIST Tool
               - ZBW_ABAP_ANALYZER Tool
               - ZBW_TRANSFORM_FINDER Tool
               - SIZING Report
               - System Clean up Activities
               - Impact of 7.4 on source system checks
               - Java Upgrade for portal
# DMO Stages
               - Preparation & Pre Migration checks
               - Execution / Migration
               - Post Migration Activities
# Testing Phase
               - Source system checks/Activities
               - System and Integration Testing
               - End to End Testing
               - Performance testing
               - Reports
               - BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren

Inconsistency in Data Replication to the Data Base MEREP_207 (SAP Mobile)

Hello
I have the following problem in WAS 7.00 SP16 (Usage type Mobile Infrastructure):
Scanario: Backend driven replication (T51, Server Driven), SyncBO = Reservation
Case A:
When modifying data in the backend with transaction MB22, in some cases (Replicated database is empty for that SyncBO), all the items (010) are generated in the data base MEREP_207 which PARENT_SYNC_KEY = '00000000 all the items with the same TOP = '00000000')
Case B:
When modifying in the backend with the transaction data with MB22, hundreds of records (items) are generated in the data base MEREP_207,
with the same PARENT_SYNC_KEY, but with a different R3KEY (items with the same header). R3KEY here represents the R3KEY of the TOP plus a sequence.
No one of the SAP Notes I searched applies to the current version of WAS.
Thank you very much for the help.
Best regards.

Hi,
it seems you key filed has the same value always or you do not have a key field - what I do not get if you talk about Notes - are you using a standard SAP Mobile App or is you mobile AP custom build?
Well, if I get it right you end up with just one dataset instead of 100 and always the last one overwrites the one before (cause SyncKey is the same)?
In that case, please check you data model for KeyFields and check that these are different. What do you do in the getlist and getdetail handlers?
Oliver

How can we make a call to the Data base in the SAP Scripts?

Hi All,
How we make a call to the data base in scripts?
I think we can use the PERFORM statement to achieve the above functionality.
Pls correct me if i am wrong?
Regards
Abhilash.

Hello.
If you want to access database in the script itself (not in print program) yes, you can use PERFORM statement.
In your script, use:
/: PERFORM F_FORM IN PROGRAM ZRFIRFS05
/: USING &VAR1&
/: CHANGING &VAR2&
/: ENDPERFORM
Then, create a program ZPROG (ZRFIRFS05 in my case) with a structure like this one:
REPORT ZRFIRFS05 .
FORM f_form TABLES in_par STRUCTURE itcsy out_par STRUCTURE itcsy.
DATA: l_data1(10).
READ TABLE in_par WITH KEY name = 'VAR1'.
CHECK sy-subrc = 0.
l_data1 = in_par-value.
* SELECT .... "YOUR SELECT TO DATABASE
READ TABLE out_par WITH KEY name = 'VAR2'.
CHECK sy-subrc = 0.
out_par-value = l_data3.
MODIFY out_par INDEX sy-tabix.
ENDFORM.
Regards.
Valter Oliveira.

Differnace b/w SID and Global data base name

please tell me what is differance b/w SID and global data base name.

Hi,
Oracle System Identifier (SID)
A name that identifies a specific instance of a running pre-release 8.1 Oracle database. For any database, there is at least one instance referencing the database.
For pre-release 8.1 databases, SID is used to identify the database. The SID is included in the connect descriptor of a tnsnames.ora file and in the definition of the listener in the listener.ora file.
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14213/glossary.htm#i433004
Global database name
The full name of the database which uniquely identifies it from any other database. The global database name is of the form "database_name.database_domain," for example, sales.us.acme.com.
The database name portion, sales, is a simple name you wish to call your database. The database domain portion, us.acme.com, specifies the database domain in which the database is located, making the global database name unique. When possible, Oracle Corporation recommends that your database domain mirror the network domain.
The global database name is the default service name of the database, as specified by the SERVICE_NAMES parameter in the initialization parameter file.
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14213/glossary.htm#i435858
Adith

How to check the validation at data base level as well as current user ente

Dear all
i have creation page in that item code will not enter the duplicate values
in that creation page contains advanced table
user will click on create 15 blank records using add another row
suppose in first row user will enter LAPTOP assume this item code
in this case i need to raise exception through databse level
in second row also user enter LAPTOP1 in this case exception will not raise becaause data is not there at databse
in third row user will enter LAPTOP1 in this case item is not there in data base but it is there in second row in this case
i need to raise exception
how to achieve this
Thanks in Advance
Sreekanth

You can validate this in form submission.
1. Call a method in AMImpl.java
2. loop the ViewObjects and check the values
3. If you find a match, throw the error
--Prasanna

SAP QUERY -logical data base ADA

I have created a SAP Query with logical data base ADA,I have selected four tables in it.Do i need to link these tables if yes..where and how?The report is for fields in asset master data.
.But i get below error when i try to genaret the output :
Fields from parallel tables within a line
Line: 01
Field: Asset description
(ANLT-TXT50, table ANLT)
Field: License plate no. of vehichle
(ANLZ-KFZKZ, table ANLZ)
i get such similar five messages but they are warning..when i execute with warning however i get the fields with description but not with Value.Ex:i get asset description and not Asset number as required.

You don't have to link them, they ar linked that is the power of a logical data base
To get the text in your report you need the key fields
Like
(Lanque Key)
company code
asset number
Asset sub number
Go to info sets and look to the standard ones like /SAPQUERY/AM01

Check our name in SAP data base

Similar Messages

Maybe you are looking for