Check-out Exclusive and Check-out Nonexclusive

Hi,
When we check out a record exclusively or non-exclusively why is the 'Modify Join Permissions' option active(not disabled).According to my understanding,if we make check-out non-exclusive, without modifying join permission,all the other users must be able to 'Join checkout'.If it is exclusive we have to assign user and role who can Join Checkout it.Then why is the 'Modify Join Permission' option coming for non-exclusive checkout also.Apart from my understanding is there any other difference between the two.Please help me in clarifying this.
Thanks and Regards,
Preethi

Hi,
(1) Exclusive, which grants join permissions to no other roles or users (by default, no other users can join the checkout); and
(2) Nonexclusive, which grants join permissions to the Everyone role (by default, all users can join the checkout).
Instead of checking in the duplicate record, the owner can use the Roll Backcommand to delete the duplicate and abandon changes.
You can use the All Versions command to display both versions (originals and duplicates) of all checked out records. This is the only way for other users to join the check out of new records.
You can use role-based privileges to decide whether owners and/or non-owners are permitted to check in, roll back, or modify join permissions of checked out records.
follow this link:
http://help.sap.com/search/highlightContent.jsp
hope this may help you,
Regards,
srinivas

Similar Messages

HT1476 My Ipod Touch 5 is not charging. Checked the cord and cleaned out the charging port. Any ideas on what is wrong?

My iPod touch (5th generation) is not charging. I have checked the cord and cleaned out the charging port and it still won't charge. Any ideas or suggestions?

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. I do ot know what youmeant by "have checked the cord ")
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

No control data maintained for checking group ZI and checking rule A

Dear all,
When i do the availability check in the sales order i got the message as No control data maintained for checking group ZI and checking rule A and finally availability check was not carried out, I check all the configuration under the sd-availabilitycheck and i maintained in material master also..........
Please give me the solution
Best Regards ,
Kumar

Hi,
Did u maintain the scope of availability check like incluke reqts,planned reqts, purchase requisitions, production order, sales reqts,delivery reqts etc.
apart from that you have to put check(Tick) mark in Requirment class and scheduleline categorie
Then u have to maintain in material master individual requirmentss or daily requirments
checking rule like A,B or if its consignment AW if it is returnable packaging AV etc(ImgS&D-Basicfunctions-Availabiltycheck&Tor---availability check aginst ATP)
Then Total summarized daily reqts or summarized individual requts
Plz check above all setting then u will get clear idea.
Regards,
Murthy

Sales Order VA01 - "No control data for checking group 04 and checking rule

Dear Gurus,
When saving a sales order in VA01, I get the following message: "No control data for checking group 04 and checking rule A"
Can anyone explain to me what that means?
How can I correct this error?
Regards
Chris

Check this thread
[Re: Process Order Material availability check error|Re: Process Order Material availability check error;
thanks
G. Lakshmipathi

Difference between " system.out.print( ) " and " system.out.println( ) "?

Hi frnds, i m a beginner in JAVA today only started with the complete refrence....can you help me and tell the the Difference between " system.out.print( ) " and " system.out.println( ) "?

Rashid2753 wrote:
hi,Yes. But it's a good idea for new Java programmers to become accustomed to using helpful resources like the API Javadocs because it's much faster then waiting for replies everytime you have a question. For experienced developers the API Javadocs are an indispensible resource.

Captivate 8, knowledge check radio buttons and check boxes not diplaying correctly in HTML5

Hello. I am working in Cp 8 on a pc (Win 7, 64-bit) and publishing in HTML5, SCORM 2004, 3rd ed. My issue is with knowledge checks. In preview they look fine, but when published, the radio buttons and check boxes are oversized and do not appear as they should. Additionally, the rollover highlight that covers the distracters is skewed and does not cover all the text in cases of long answer choices. When published as a SWF, there are no issues but project requirements are for HTML5 output only. Help?

Create an XML Schema (XSD) and define that as the default form schema. The form data will conforms to the order of fields defined in the XML schema.
Hope that helps.
Nith

GX740 - Anyone get two TRUE separate audio streams out Headphones and LINE OUT?

Hoping for an update on this. I asked MSI via their support section and wow... what a FAIL that was:
Quote
Do you have new specific drivers that allow TRUE 4 channel output? 2 out the headphones and 2 separate out the LINE OUT as implied by the design? I've tried everything and it doesn't work.
I've tried ASIO4YOU drivers - doesn't work.
I've tried every RealTek driver out there - nothing.
Yes, I've set the RealTek driver to do multiple out but it sends the audio out the HDMI port, NOT THE LINE!
I know this can be done cause you can set the REALTEK for 7.1 and you get separate streams out the headphones and line-out ports!
Please - you've sold a laptop with "Headphone Out" and "Line Out" yet it fails to actually do that - NEW DRIVERS PLEASE?
Posted: Feb 11, 2011 by Peter Stone
All Posts
Dear Customer,
Please go to msi global website to download the audio driver,then install it.
audio driver:
http://www.msi.com/service/download/nbdriver-15227.html
Needless to say, that did nothing. In fact, I can't understand how I could of received such an answer given it made no sense what-so-ever. Download the driver that came with it? One that's now almost a year old?
Regardless... I've tried that one. I've tried the latest RealTek drivers. I've tried a multitude of ASIO drivers. NOTHING WORKS. Yes, I've set the RealTek to send TWO SEPARATE STREAMS. That does NOTHING. The only thing I've been able to ascertain is that you can send one stream out the headphone/line out (same thing) AND one out the HD port which is useless.
Here's the pain in the ass: If you go to the RealTek setup and change it to 7.1 and hit TEST, you DO hear separate output out the HEADPHONE JACK and the THIRD Audio Out jack which is the side fills so I know this laptop CAN spit audio out two separate outputs sitting on the side of the computer.
Why do I want to do this:
Simple. I'm lugging around an external audio interface for DJing and it's a pain. I'd rather just tap the headphones out for, well, headphones and send the line out or that third audio output to the DJ mixer. Done! I've tried MIXMEISTER, VIRTUAL DJ, NOTHING WORKS! I can select various strangely named outputs insinuating speaker out, speaker out + 1, etc... but no... it doesn't work at all...
Sooooooooo... has ANYONE been able to get this to work? I'd love to know...

Yea Stu... been through this part... Playback devices show the typical:
1. Speakers (Realtek) -> Plays on ext. speakers but sounds like just treble. Headphone Out plays this stream.
2. RealTek HD Audio 2nd output -> Plays on ext. speakers but sounds like bass/mids. No treble. NO OUTPUT PLAYS THIS. Plug anything in and sound from the speakers just shuts off
3. Realtek HDMI Output (Not selectable)
4. Realtek Digital Output (Not selectable)
So yea, it seems right out of the box there is a problem with the sound on this unit. Choosing speakers sounds like crap (no mid/bass) and choosing HD Audio 2nd output sounds like crap (all mid/bass no treble).
There is no discrete dual audio out the jacks.
HOWEVER - Go choose 7.1 from the realtek setup and do a test. Well what do you know, DISCRETE 2ND AUDIO OUTPUT OUT THE HEADPHONE JACK AND THE 3RD OUTPUT JACK OF THE 4 IN A ROW. This PROVES you can have two discrete stereo audio streams coming out the output jacks. Just need someone to write the driver for it.
Here's the thing. This laptop HAS 4 1/8" JACKS. SEE:
Here's what the manual says about the output jacks:
Mic In:

System.out.print and System.out.println

is it true that the System.out.print("\n") will print a new line character in all platforms?
in other words is it ok to assume that System.out.print("\n") and System.out.println(); will give the same output regardless of platform?

System.out.print("\n") Chances are that will produce different results on different platforms as some platforms use \n, some use \r some use \n\r (or is it \r\n?).
The question is why do you care when System.out.println() will do what you want? An alternative:
System.out.print(System.getProperty("line.separator"));

What is the difference between System.out.println() and System.out.print()?

Hi everyone,
I am only a new comer and know very little about Java. I will appreciate a lot if anyone teaches me what the difference between two method println and print is? Thank you so much.

The PrintStream class defines a number of print() methods that ... print
things. System.out is a commonly used PrintStream.
The difference between the print(...) and println(...) methods is that the
second one prints a new line at the end. What it actually prints varies
from system to system: sometimes it will output a '\n' sometimes not.
There is a system property called line.separator that determines
how a new line is output.

Check the settings for checking group 02 and checking rule BO

Hi,
I am doing Backorder processing for order , I am getting the error as follows,
I have checked Checking Rule For Updating Backorders. Everything ok.
Please suggest.
Thanks,
Pramod

One Probable reason for you error.
Check the TC: OVZ2 whether you have ticked the Block qty req. for the Checking group 02 or you have selected No checks.
The standard setting for 02 should not have any tick..
or _Check in the TC : se38 program : SAPLOPP3.
Check whether you have defined the plants with the checking rule BO.
This must be your error._
reward points if helpful,
regards,
Amlan Sarkar

Availability check during creation and release

Hi Everybody,
I am need of your expertise, The requirement is "when I try convert planned order to production order for a sales document", I am getting error say " Error during availability check". When I check the log it says "No control data maintained for checking group XX and Checking rule $$".
Do anyone have any kind of idea, what is this control data about?
Thanks in advance.
Esh

Hi
Please go to spro
production >> shop floor control>> operation>> Availability check>> define checking rule
first maintain checking rule
go to T : code OPJK to maintain order control
Maintain checking rule
go to matl availablity , PRT check, Capacity check
U can see option tick on no avail check
ths may help u
Please reward points
Rgds
Sunil

NWDI Issue - Cannot checkout missing file that was checked out exclusively

Hello, I'm getting error when I try to edit a file (mdmapi_assembly.pp) on my project.
This file was checked out exclusively on another computer, that's does not exist anymore (even it's owner lol).
This error appear on DTR Console:
EDIT (FAILED: server response: Conflict [(pre||post)-condition failed: x:cannot-checkout-exclusively-checkedout-resource]) mdmapi_assembly.pp (C:\......\_comp\def\mdmapi_assembly.pp)
Anyone can help me?
Thanks anyway!

Hi Julio,
I think that some one created an activity on this specific componet and left it open. It looks like that activity never check-in. To make sure this please log on to Component Build Service>>Now select your build space and compartment>> now click on Pending activities.
See if there are any pending activites left? if there are , if you can, request basis to delete the open activity if it is not useful and nobody was using it. Sync the latest version and it shopuld allow to create a new activity. If there are no pending activites and you still see the same error then delete the project and configurations from the local NWDS. Reimport the configurations from the Development configurations perspective, and try create a project for the specific DC and try creating an activity,
Thanks
Krishna

Must *.fpj file be checked out exclusive?

RH9, RH9 Server, WebHelp Pro, TFS source control
We are two authors working on a project. When one of us attempts to create a project, TFS blocks it saying that the project .fpj file must be checked out exclusive in order to create a topic.
Of course we can solve the problem by one of us checking it in so the other can create a topic. But should this really be necessary?

Hi,
The *.fpj files are located in each folder in the project. If you add a topic, RoboHelp adds a link to the topic in the .fpj file so it knows which topics are part of the project. The same goes for the .hhc, which holds the TOC. If you want to modify the file, you need to check it out. I don't think RoboHelp supports multiple check out, but I may be wrong.
If the TOC is a problem, you can create multiple TOC's in the project and merge them in the default TOC. When you check out one of the TOCs, the other can continue working with the other TOC's. Nothing to do about the .fpj.
Greet,
Willam

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same docum

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same document and it comes out fine. Any ideas ? Using Windows 7 Service Pack 1

Sorry my bad. I have tried to print the same document on another printer and all the formatting is fine.

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

Check-out Exclusive and Check-out Nonexclusive

Similar Messages

Maybe you are looking for